Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “regression analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
NASA NTRS2009

Trends and Solar Cycle Effects in Temperature Versus Altitude From the Halogen Occultation Experiment for the Mesosphere and Upper Stratosphere

Fourteen-year time series of mesospheric and upper stratospheric temperatures from the Halogen Occultation Experiment (HALOE) are analyzed and reported. The data have been binned according to ten-degree wide latitude zones from 40S to 40N and at 10 altitudes from 43 to 80 km-a total of 90 separate time series. Multiple linear regression (MLR) analysis techniques have been applied to those time series. This study focuses on resolving their 11-yr solar cycle (or SC-like) responses and their linear trend terms. Findings for T(z) from HALOE are compared directly with published results from ground-based Rayleigh lidar and rocketsonde measurements. SC-like responses from HALOE compare well with those from lidar station data at low latitudes. The cooling trends from HALOE also agree reasonably well with those from the lidar data for the concurrent decade. Cooling trends of the lower mesosphere from HALOE are not as large as those from rocketsondes and from lidar station time series of the previous two decades, presumably because the changes in the upper stratospheric ozone were near zero during the HALOE time period and did not affect those trends.

Remsberg, Ellis E.↗
NASA NTRS2008

Skill in Retrievals

Retrieval Skill quantifies the ability of one retrieval from a sounder to be more accurate than the best forecast relative to another with the same of another sounder. This is summarized using a Retrieval Anomaly Skill Score (RASS) which is the cor (retrieved-background, truth-background) * sqrt(f), Where f is defined as the ratio of accepted to the possible retrievals. Charts show various features and comparisons of RASS to other methods of retrieval.

forecasting↗
NASA NTRS2014

Decadal-Scale Responses in Middle and Upper Stratospheric Ozone From SAGE II Version 7 Data

Stratospheric Aerosol and Gas Experiment (SAGE II) version 7 (v7) ozone profiles are analyzed for their decadal-scale responses in the middle and upper stratosphere for 1991 and 1992-2005 and compared with those from its previous version 6.2 (v6.2). Multiple linear regression (MLR) analysis is applied to time series of its ozone number density vs. altitude data for a range of latitudes and altitudes. The MLR models that are fit to the time series data include a periodic 11 yr term, and it is in-phase with that of the 11 yr, solar UV (Ultraviolet)-flux throughout most of the latitude/ altitude domain of the middle and upper stratosphere. Several regions that have a response that is not quite in-phase are interpreted as being affected by decadal-scale, dynamical forcings. The maximum minus minimum, solar cycle (SClike) responses for the ozone at the low latitudes are similar from the two SAGE II data versions and vary from about 5 to 2.5% from 35 to 50 km, although they are resolved better with v7. SAGE II v7 ozone is also analyzed for 1984-1998, in order to mitigate effects of end-point anomalies that bias its ozone in 1991 and the analyzed results for 1991-2005 or following the Pinatubo eruption. Its SC-like ozone response in the upper stratosphere is of the order of 4%for 1984-1998 vs. 2.5 to 3%for 1991-2005. The SAGE II v7 results are also recompared with the responses in ozone from the Halogen Occultation Experiment (HALOE) that are in terms of mixing ratio vs. pressure for 1991-2005 and then for late 1992- 2005 to avoid any effects following Pinatubo. Shapes of their respective response profiles agree very well for 1992-2005. The associated linear trends of the ozone are not as negative in 1992-2005 as in 1984-1998, in accord with a leveling off of the effects of reactive chlorine on ozone. It is concluded that the SAGE II v7 ozone yields SC-like ozone responses and trends that are of better quality than those from v6.2.

Remsberg, E. E.↗
NASA NTRS2014

Algorithm Development and Validation of CDOM Properties for Estuarine and Continental Shelf Waters Along the Northeastern U.S. Coast

An extensive set of field measurements have been collected throughout the continental margin of the northeastern U.S. from 2004 to 2011 to develop and validate ocean color satellite algorithms for the retrieval of the absorption coefficient of chromophoric dissolved organic matter (aCDOM) and CDOM spectral slopes for the 275:295 nm and 300:600 nm spectral range (S275:295 and S300:600). Remote sensing reflectance (Rrs) measurements computed from in-water radiometry profiles along with aCDOM() data are applied to develop several types of algorithms for the SeaWiFS and MODIS-Aqua ocean color satellite sensors, which involve least squares linear regression of aCDOM() with (1) Rrs band ratios, (2) quasi-analytical algorithm-based (QAA based) products of total absorption coefficients, (3) multiple Rrs bands within a multiple linear regression (MLR) analysis, and (4) diffuse attenuation coefficient (Kd). The relative error (mean absolute percent difference; MAPD) for the MLR retrievals of aCDOM(275), aCDOM(355), aCDOM(380), aCDOM(412) and aCDOM(443) for our study region range from 20.4-23.9 for MODIS-Aqua and 27.3-30 for SeaWiFS. Because of the narrower range of CDOM spectral slope values, the MAPD for the MLR S275:295 and QAA-based S300:600 algorithms are much lower ranging from 9.9 and 8.3 for SeaWiFS, respectively, and 8.7 and 6.3 for MODIS, respectively. Seasonal and spatial MODIS-Aqua and SeaWiFS distributions of aCDOM, S275:295 and S300:600 processed with these algorithms are consistent with field measurements and the processes that impact CDOM levels along the continental shelf of the northeastern U.S. Several satellite data processing factors correlate with higher uncertainty in satellite retrievals of aCDOM, S275:295 and S300:600 within the coastal ocean, including solar zenith angle, sensor viewing angle, and atmospheric products applied for atmospheric corrections. Algorithms that include ultraviolet Rrs bands provide a better fit to field measurements than algorithms without the ultraviolet Rrs bands. This suggests that satellite sensors with ultraviolet capability could provide better retrievals of CDOM. Because of the strong correlations between CDOM parameters and DOM constituents in the coastal ocean, satellite observations of CDOM parameters can be applied to study the distributions, sources and sinks of DOM, which are relevant for understanding the carbon cycle, modeling the Earth system, and to discern how the Earth is changing.

CDOM Properties↗
NASA NTRSDate not supplied

Simultaneous Development and Robust Optimization of a Microstructure Dependent Material

Recent microstructure characterization techniques combined with Symbolic Regression(SR)analysis has been proven to generate white box plasticity models well suited for incorporation into FEA software.The current work builds upon those efforts and demonstrates the applicability of Sequential Monte-Carlo (SMC) methods within SR analysis to condense model development and robust optimization into a single, co-dependent process. In this project, SMC methods provide a mechanism through which the observed microstructure features and associated variability can be incorporated into the discovery phase of model development and simultaneously recover approximate parameter distributions through SR analysis. The demonstration utilized a data set consisting of tensile test results from a limited number of sample specimens with corresponding EBSD data from which microstructure features were characterized.The maximum threshold stress model in the Visco-Plastic Self-Consistent (VPSC) code developed by Los Alamos National Laboratories was calibrated using mechanical test data.Synthetic volume elements with statistically equivalent microstructure were generated with DREAM3Dbased on the observed EBSD data. VPSC was used to simulate the corresponding tensile test response for each of the synthetic volume elements. The simulated microstructure and tensile test data was used astraining datafor SMC-SR algorithm and the resulting model was validated with data from the original empirical data set.

Karl Garbrecht↗
NASA NTRSDate not supplied

Geometric Sensitivity of Residual Fields in Metal Additive Manufacturing

The sensitivity of geometrical parameters on the residual stress and distortion as computed by a metal additive manufacturing simulation is presented. A nozzle-like geometry was chosen with its length, wall thickness, and outer radius varied. A Latin hypercube sampling of 300 specimens produced the combinations of the geometrical parameters. Full thermomechanical simulations predicted the residual fields. Statistical analysis including regression curves shows that there is a strong correlation between these residual fields and the geometry, hinting that it may be possible to predictably influence the residual displacements and residual stresses by varying the overall geometry.

Multiscale Modeling↗
DOE OSTI2010

Quantifying Changes in Building Electricity Use, with Application to Demand Response

We present methods for analyzing commercial and industrial facility 15-minute-interval electric load data. These methods allow building managers to better understand their facility's electricity consumption over time and to compare it to other buildings, helping them to ask the right questions to discover opportunities for demand response, energy efficiency, electricity waste elimination, and peak load management. We primarily focus on demand response. Methods discussed include graphical representations of electric load data, a regression-based electricity load model that uses a time-of-week indicator variable and a piecewise linear and continuous outdoor air temperature dependence, and the definition of various parameters that characterize facility electricity loads and demand response behavior. In the future, these methods could be translated into easy-to-use tools for building managers.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2012

Automatic treatment of the variance estimation bias in TRIPOLI-4 criticality calculations

The central limit (CLT) theorem States conditions under which the mean of a sufficiently large number of independent random variables, each with finite mean and variance, will be approximately normally distributed. The use of Monte Carlo transport codes, such as Tripoli4, relies on those conditions. While these are verified in protection applications (the cycles provide independent measurements of fluxes and related quantities), the hypothesis of independent estimates/cycles is broken in criticality mode. Indeed the power iteration technique used in this mode couples a generation to its progeny. Often, after what is called 'source convergence' this coupling almost disappears (the solution is closed to equilibrium) but for loosely coupled systems, such as for PWR or large nuclear cores, the equilibrium is never found, or at least may take time to reach, and the variance estimation such as allowed by the CLT is under-evaluated. In this paper we first propose, by the mean of two different methods, to evaluate the typical correlation length, as measured in cycles number, and then use this information to diagnose correlation problems and to provide an improved variance estimation. Those two methods are based on Fourier spectral decomposition and on the lag k autocorrelation calculation. A theoretical modeling of the autocorrelation function, based on Gauss-Markov stochastic processes, will also be presented. Tests will be performed with Tripoli4 on a PWR pin cell. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2018

Challenges of Using Indistinguishable from Background as a Release Criterion at FUSRAP Projects - 18157

The US Army Corps of Engineers (USACE) utilizes the Multi-Agency Radiation Survey and Site Investigation Manual (MARSSIM) approach to site release on Formerly Utilized Sites Remedial Action Program (FUSRAP) projects. Use of Indistinguishable from Background (IFB) as a release criterion is discussed in MARSSIM as Scenario B; however, the discussion is arguably limited and refers the user to other documents. USACE has utilized the IFB approach at select FUSRAP projects. USACE experience is that use of IFB as a release criterion has been difficult to implement at best. There are many challenges in using the IFB approach. These include: release criterion is required per MARSSIM; multiple reference areas need to be established; and data presentation. Potential methods to overcome these challenges are discussed. USACE has utilized alternative statistical approaches as well as the IFB approach discussed in MARSSIM for specific purposes at FUSRAP sites. Alternatives to the IFB approach discussed in this paper include other statistical tests such as the Tukey Kramer test. These alternatives may be better suited to release an area of a property prior to the development of release criteria. USACE has found using the IFB criterion useful in certain specific circumstances. These include post MARSSIM Scenario A final status survey data evaluations and for review of historical data. The challenges, alternatives, and circumstances to use the IFB approach are discussed. Other environmental remediation projects attempting to utilize IFB as a criterion may benefit from the USACE experiences as discussed herein. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2018

Transient Unsaturated Zone Modeling of Radioactive Waste Pits at Los Alamos National Laboratory - 87544 - 18432

Waste disposals at Material Disposal Area G (MDA G) at Los Alamos National Laboratory (LANL) occur primarily in a series of long, rectangular pits into which layers of waste have been emplaced beginning in the late 1950's. MDA G is situated in north-central New Mexico on top of Mesita del Buey, a narrow 3 km long mesa in the Parajito Plateau. The mesa is composed primarily of volcanic tuff from two principle volcanic eruptions in the Jemez Mountains which deposited the Otowi and Tshirege Members of the Bandelier Tuff. The Cerros del Rio Basalt underlay the tuff units and extends down for approximately 200 meters. The water table lies within the basalts at around 300 m below the surface of the mesa. The local climate is temperate and semiarid, averaging around 34 cm of precipitation per year. Ambient subsurface moisture conditions are dry, with water content typically below 10%. During disposal operations, open pits are subject to enhanced infiltration compared to the final covered configuration due to the unvegetated disturbed surface and precipitation events. Additionally, water added to the pits during disposal operations for tasks like waste compaction and dust suppression introduces additional moisture to the system during disposal operations that could potentially provide a pathway for contaminants in the waste zone to migrate through the unsaturated zone. Modeling was conducted using the HYDRUS-2D/3D software to evaluate the spatial extent of saturation changes and fluxes across geologic layer interfaces in the unsaturated zone throughout the life cycle of a waste pit. A general 2-dimensional framework was developed that included a cross section of a waste pit and the underlying geologic units. Several geological layerings were developed to represent the variation across the mesa at Area G. The model was run stochastically for hundreds of realizations to understand how variations in hydraulic parameters (e.g., porosity, saturated hydraulic conductivity, Van Genuchten parameters, etc.) and operational parameters (e.g., pit open period duration, pit depth, initial saturation of the waste zone, etc.) affect the extent of saturation changes and fluxes in the deep unsaturated zone. Distributions for these parameters were developed based on available site data. Results of the unsaturated zone modeling indicate that a significant amount of water can reach the lower unsaturated zone under some circumstances, particularly when the amount of water introduced during pit operations is high. A statistical study of modeling results was performed to develop a regression that describes the variations of water flux in time at the geological layer interfaces. These statistical model results will be used to evaluate solute transport in a future effort. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2017

Development of a transient signal validation technique via a modified kernel regression model - 365

The demand for robust and resilient performance has led to the use of online-monitoring and signal validation techniques to monitor the process parameters and equipment conditions using several empirical models. One of these models is kernel regression (KR). Although KR is being used and performed excellently when applied to steady state, it has limitation in time-varying data that has several repetition of the same data point of the signals, especially if those signals are used to infer the other signals. In addition, many situations are related to variation and fluctuation during normal states, such as transient - start-up and shutdown mode. However, accurate estimation of the process signal can lead to the proper understanding of the equipment behaviours as well as enhance the online monitoring applications. In the sight of foregoing, this paper proposed a modified KR model, especially for transient signal validation to resolve the setback of conventional KR by improving the measure of similarities in the conventional KR. The performance of the proposed model is verified using both experimental data and the plant simulation data, and its results are compared with that of conventional KR. The results show that the proposed model has a greater robustness in particular situations compared to conventional KR, and it can be used to improve process and equipment monitoring applications. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2019

Evaluation of diffusion kurtosis and diffusivity from baseline staging MRI as predictive biomarkers for response to neoadjuvant chemoradiation in locally advanced rectal cancer

Purpose: To evaluate the role of diffusion kurtosis and diffusivity as potential imaging biomarkers to predict response to neoadjuvant chemoradiation therapy (CRT) from baseline staging magnetic resonance imaging (MRI) in locally advanced rectal cancer (LARC). Materials and methods: This retrospective study included 45 consecutive patients (31 male/14 female) who underwent baseline MRI with high b-value sequences (up to 1500 mm/s{sup 2}) for LARC followed by neoadjuvant chemoradiation and surgical resection. The mean age was 57.4 years (range 34.2–72.9). An abdominal radiologist using open source software manually segmented T2-weighted images. Segmentations were used to derive diffusion kurtosis and diffusivity from diffusion-weighted images as well as volumetric data. These data were analyzed with regard to tumor regression grade (TRG) using the four-tier American Joint Committee on Cancer (AJCC) classification, TRG 0–3. Proportional odds regression was used to analyze the four-level ordinal outcome. A sensitivity analysis was performed using univariable logistic regression for binary TRG groups, TRG 0/1 (> 90% response), or TRG 2/3 (< 90% response). p < 0.05 was considered significant throughout. Results: In the univariable proportional odds regression analysis, higher diffusivity summary (D{sub sum}) values were observed to be significantly associated with higher odds of being in one or more favorable TRG group (TRG 0 or 1). In other words, on average, patients with higher D{sub sum} values were more likely to be in a more favorable TRG group. These results are mostly consistent with the sensitivity analysis, in which higher values for most D{sub sum} values [all but region of interest (ROI)-max D median (p = 0.08)] were observed to be significantly associated with higher odds of being TRG 0 or 1. Tumor volume of interest (VOI) and ROI volume, ROI kurtosis mean and median, and VOI kurtosis mean and median were not significantly associated with TRG. Conclusion: Diffusivity derived from the baseline staging MRI, but not diffusion kurtosis or volumetric data, is associated with TRG and therefore shows promise as a potential imaging biomarker to predict the response to neoadjuvant chemotherapy in LARC. Clinical relevance statement: Diffusivity shows promise as a potential imaging biomarker to predict AJCC TRG following neoadjuvant CRT, which has implications for risk stratification. Patients with TRG 0/1 have 5-year disease-free survival (DFS) of 90–98%, as opposed to those who are TRG 2/3 with 5-year DFS of 68–73%.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2025

Decoding diffraction and spectroscopy data with machine learning: A tutorial

This Tutorial provides a step-by-step guide on how to apply supervised machine-learning techniques to analyze diffraction and spectroscopy data. This Tutorial details four models—a reconstruction-focused model, a regression-focused model, a hybrid reconstruction/regression model, and a multimodal model—that use x-ray diffraction profiles and vibrational density of states spectra to predict various microstructural descriptors. In this Tutorial, we cover data pre-processing steps, constructions of the models via dimensionality reduction and regression, training, and analysis of these models. Comparisons of the model’s performance are provided, highlighting the strength and weakness of the various approaches utilized.

36 MATERIALS SCIENCE↗
NASA NTRSDate not supplied

Multilevel Probit Regression for 3-Alternative Forced Choice Audibility Testing

A recent psychoacoustic test at NASA Langley generated a dataset of 3-alternative forced-choice responses for 40 subjects that measured the audibility of a tone complex in a shaped broadband masker. The task was completed by 4 subjects at a time in a small theatre-like environment using predetermined stimuli levels. These data were subject to 4 forms of probit regression: a “complete pooling” analysis in which all data from the test was fit with one curve, two forms of “no pooling” analyses in which subjects’ data were treated individually (using both packaged and custom software), and a “partial pooling” analysis in which multilevel-regression software fit both individual curves as well as population-level parameters at the same time. The results of the analyses are compared in terms of both individual- and population-level parameters. Partial pooling appears to give the most consistent results at both levels, as well as provide the most robustness among the packaged approaches (albeit with added complexity over single-level regression). These results are also contained in a recent NASA technical memorandum entitled “Comparisons of Analysis Methods Applied to Alternative Forced Choice Audibility Data.”

Psychoacoustics↗
DOE OSTI2021

High temperature oxidation of corrosion resistant alloys from machine learning

Parabolic rate constants, k p , were collected from published reports and calculated from corrosion product data (sample mass gain or corrosion product thickness) and tabulated for 75 alloys exposed to temperatures between ~800 and 2000 K (~500–1700 °C; 900–3000°F). Data were collected for environments including lab air, ambient and supercritical carbon dioxide, supercritical water, and steam. Materials studied include low- and high-Cr ferritic and austenitic steels, nickel superalloys, and aluminide materials. A combination of Arrhenius analysis, simple linear regression, supervised and unsupervised machine learning methods were used to investigate the relations between composition and oxidation kinetics. The supervised machine learning techniques produced the lowest mean standard errors. The most significant elements controlling oxidation kinetics were Ni, Cr, Al, and Fe, with Mo and Co composition also found to be significant features. The activation energies produced from the machine learning analysis were in the correct distributions for the diffusion constants for the oxide scales expected to dominate in each class.

Materials Science↗
DOE OSTI2020

An Exploratory Approach Using Regression and Machine Learning in the Analysis of Mass Absorption Cross Section of Black Carbon Aerosols: Model Development and Evaluation

Mass absorption cross-section of black carbon (MAC BC ) describes the absorptive cross-section per unit mass of black carbon, and is, thus, an essential parameter to estimate the radiative forcing of black carbon. Many studies have sought to estimate MAC BC from a theoretical perspective, but these studies require the knowledge of a set of aerosol properties, which are difficult and/or labor-intensive to measure. We therefore investigate the ability of seven data analytical approaches (including different multivariate regressions, support vector machine, and neural networks) in predicting MAC BC for both ambient and biomass burning measurements. Our model utilizes multi-wavelength light absorption and scattering as well as the aerosol size distributions as input variables to predict MAC BC across different wavelengths. We assessed the applicability of the proposed approaches in estimating MAC BC using different statistical metrics (such as coefficient of determination (R 2 ), mean square error (MSE), fractional error, and fractional bias). Overall, the approaches used in this study can estimate MAC BC appropriately, but the prediction performance varies across approaches and atmospheric environments. Based on an uncertainty evaluation of our models and the empirical and theoretical approaches to predict MAC BC , we preliminarily put forth support vector machine (SVM) as a recommended data analytical technique for use. We provide an operational tool built with the approaches presented in this paper to facilitate this procedure for future users.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2020

Statistical Analysis of Factors Riving Surface Ozone Variability over Continental South Africa

Statistical relationships between surface ozone (O3) concentration, precursor species and meteorological conditions in continental South Africa were examined from data obtained from measurement stations in north-eastern South Africa. Three multivariate statistical methods were applied in the investigation, i.e. multiple linear regression (MLR), principal component analysis (PCA) and –regression (PCR), and generalised additive model (GAM) analysis. The daily maximum 8-h moving average O3 concentrations were considered in these statistical models (dependent variable). MLR models indicated that meteorology and precursor species concentrations are able to explain ~50% of the variability in daily maximum O3 levels. MLR analysis revealed that atmospheric carbon monoxide (CO), temperature and relative humidity were the strongest factors affecting the daily O3 variability. In summer, daily O3 variances were mostly associated with relative humidity, while winter O3 levels were mostly linked to temperature and CO. PCA indicated that CO, temperature and relative humidity were not strongly collinear. GAM also identified CO, temperature and relative humidity as the strongest factors affecting the daily variation of O3. Partial residual plots found that temperature, radiation and nitrogen oxides most likely have a non-linear relationship with O3,while the relationship with relative humidity and CO is probably linear. An inter-comparison between O3 levels modelled with the three statistical models compared to measured O3 concentrations showed that the GAM model offered a slight improvement over the MLR model. These findings emphasise the critical role of regional-scale O3 precursors coupled with meteorological conditions in daily variances of O3 levels in continental South Africa.

multiple linear regression (MLR)↗
DOE OSTI2022

Estimation of conditional cumulative incidence functions under generalized semiparametric regression models with missing covariates, with application to analysis of biomarker correlates in vaccine trials

Herein, this article presents generalized semiparametric regression models for conditional cumulative incidence functions with competing risks data when covariates are missing by sampling design or happenstance. A doubly robust augmented inverse probability weighted (AIPW) complete-case approach to estimation and inference is investigated. This approach modifies IPW complete-case estimating equations by exploiting the key features in the relationship between the missing covariates and the phase-one data to improve efficiency. An iterative numerical procedure is derived to solve the nonlinear estimating equations. The asymptotic properties of the proposed estimators are established. A simulation study examining the finite-sample performances of the proposed estimators shows that the AIPW estimators are more efficient than the IPW estimators. The developed method is applied to the RV144 HIV-1 vaccine efficacy trial to investigate vaccine-induced IgG binding antibodies to HIV-1 as correlates of acquisition of HIV-1 infection while taking account of whether the HIV-1 sequences are near or far from the HIV-1 sequences represented in the vaccine construct.

97 MATHEMATICS AND COMPUTING↗