SEARCH · Engineering Papers

Results for “potential yield”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Goldstone intracomplex connected element interferometry

Interferometric observations of the radio source pair 3C 84 and OE 400 were made on the 21 km baseline between Deep Space Station (DSS) 13 and DSS 15 to explore the angular navigation potential of intracomplex connected element interferometry (CEI). The differential phase-delay observable formed from pairs of 3 minute scans exhibited a precision of 1 psec, while the actual scatter of the phase-delay residuals for eleven scans over the 90 minute observing session was about 10 psec, consistent with the expected few millimeter fluctuations in the wet tropospheric path delay. Fitting for the position of OE 400 relative to 3C 84 yielded an error ellipse with a semi-minor axis of 60 nrad. Given the short data arc in this experiment, the orthogonal direction in the plane of the sky is not well determined; however, a second baseline or a data arc spanning a larger fraction of the source mutual visibility window could provide simultaneous determination of both right ascension and declination. Examination of the phase-delay residuals supports the accuracy of the cycle ambiguity resolution. However, reliable phase ambiguity resolution will pose the most significant challenge to routine use of CEI for spacecraft tracking, particularly when the a priori spacecraft source position is not well known. Several approaches for ambiguity resolution are briefly outlined.

Edwards, C. D.↗

NASA NTRS2002

Limits on the UV Photodecomposition of Carbonates on Mars

The effect of UV (ultraviolet) light on the stability of calcium carbonate in a simulated martian atmosphere was experimentally investigated. Sample cells containing C-13 labeled calcite were irradiated with a Xe arc lamp in 10 mbar of simulated martian atmosphere and a quadrupole mass spectrometer was used to monitor the headspace gases for the production of (13)CO2. We found no experimental evidence of the UV photodecomposition of calcium carbonate in a simulated martian atmosphere. Extrapolating the lower limit of detection of our experimental system to an upper limit of carbonate decomposition on Mars yields a quantum efficiency of 3.5 x 10(exp -8) molecules/photon over the wavelength interval of 190-390 nm and a maximum UV photodecomposition rate of 1.2 x 10(exp -13) kg m(exp -2) s(exp -1) from a calcite surface. The maximum loss of bulk calcite due to this process would be 2.5 nm yr(exp -1). However, calcite is expected to be thermodynamically stable on the surface of Mars and potential UV photodecomposition reaction mechanisms indicate that while calcium carbonate may decompose under vacuum, it would be stable in a CO2 atmosphere. Given the expected stability of carbonate on Mars and our inability to detect carbonate decomposition, we conclude that it is unlikely that the apparent absence of carbonate on the martian surface is due to UV photo decomposition of calcite in the current environment.

Quinn, Richard↗

NASA NTRS2002

Dual Microstructure Heat Treatment of a Nickel-Base Disk Alloy Assessed

Gas turbine engines for future subsonic aircraft will require nickel-base disk alloys that can be used at temperatures in excess of 1300 F. Smaller turbine engines, with higher rotational speeds, also require disk alloys with high strength. To address these challenges, NASA funded a series of disk programs in the 1990's. Under these initiatives, Honeywell and Allison focused their attention on Alloy 10, a high-strength, nickel-base disk alloy developed by Honeywell for application in the small turbine engines used in regional jet aircraft. Since tensile, creep, and fatigue properties are strongly influenced by alloy grain size, the effect of heat treatment on grain size and the attendant properties were studied in detail. It was observed that a fine grain microstructure offered the best tensile and fatigue properties, whereas a coarse grain microstructure offered the best creep resistance at high temperatures. Therefore, a disk with a dual microstructure, consisting of a fine-grained bore and a coarse-grained rim, should have a high potential for optimal performance. Under NASA's Ultra-Safe Propulsion Project and Ultra-Efficient Engine Technology (UEET) Program, a disk program was initiated at the NASA Glenn Research Center to assess the feasibility of using Alloy 10 to produce a dual-microstructure disk. The objectives of this program were twofold. First, existing dual-microstructure heat treatment (DMHT) technology would be applied and refined as necessary for Alloy 10 to yield the desired grain structure in full-scale forgings appropriate for use in regional gas turbine engines. Second, key mechanical properties from the bore and rim of a DMHT Alloy 10 disk would be measured and compared with conventional heat treatments to assess the benefits of DMHT technology. At Wyman Gordon and Honeywell, an active-cooling DMHT process was used to convert four full-scale Alloy 10 disks to a dual-grain microstructure. The resulting microstructures are illustrated in the photomicrographs. The fine grain size in the bore can be contrasted with the coarse grain size in the rim. Testing (at NASA Glenn) of coupons machined from these disks showed that the DMHT approach did indeed produce a high-strength, fatigue resistant bore and a creep-resistant rim. This combination of properties was previously unobtainable using conventional heat treatments, which produced disks with a uniform grain size. Future plans are in place to spin test a DMHT disk under the Ultra Safe Propulsion Project to assess the viability of this technology at the component level. This testing will include measurements of disk growth at a high temperature as well as the determination of burst speed at an intermediate temperature.

Gayda, John↗

NASA NTRSDate not supplied

Curved Diffractive X-ray Optics for X-ray Astronomy

We report on a concept for curved diffractive X-ray optics (CDXO). CDXO would enable potential new optical designs for X-ray instruments, such as a two element spectrometer, in which the secondary element of an X-ray mirror pair is patterned with an X-ray grating. A two-element spectrometer design eliminates the grating assembly, resulting in decreased instrument mass and reduced power requirements. In addition, a two-element spectrometer may realize cost/schedule savings by eliminating a separate grating alignment effort, and yield increased effective area over three element designs. We present a raytrace concept study of a two-element spectrometer compact enough to fit within a sounding rocket payload. We also review the progress made in electron-beam lithography (EBL) techniques that would enable curved diffractive X-ray optics to be patterned, and outline a procedure by which the accuracy of the EBL patterning process can be measured interferometrically.

Casey T. DeRoo↗

NASA NTRSDate not supplied

Impact of Space Radiation on Plant Seeds: from Arabidopsis thaliana to Crops

One of the major concerns for long-term exploration missions beyond the Earth’s magnetosphere is radiation risk, primarily from solar particle events (SPE) and galactic cosmic rays (GCR). With the goal of manned Mars exploration, the production of fresh food during long-duration space missions provides critical nutritional supplementation and may also benefit astronauts’ behavioral health. However, the effects of space radiation on plants and plant propagules have not been sufficiently investigated and characterized. This is the final report of our project to summarize the findings of the effect of space radiation exposure on plant seeds from morphometrics, nutritional values, to molecular machenisms. In this study, we evaluated the effect of simulated GCR (using dry seeds) or SPE (using hydrated seeds) on seeds of Arabidopsis, Mizuna mustard, ‘Outredgeous’ red romaine lettuce, and ‘Red Robin’ dwarf tomato. Seeds were exposed to various doses of simulated space radiation scenarios, either acutely or at a low dose rate (LDR), using the NASA Space Radiation Laboratory (NSRL) facility at Brookhaven National Lab (BNL). Exposure to simulated GCR or SPE at the levels tested had no significant impact on the germination rate in Arabidopsis and crop seeds; however, GCR reduced the viability of lettuce and tomato seeds. Overall, the morphological changes of the seedlings cultured from irradiated seeds were dose- and ion quality- dependent, with heavier ions causing more severe damage. These changes ranged from cotyledon deformation, shortened root length, smaller seedling size, and other signs of stress, depending on the seed types. Both 40 and 80 cGy (LDR) exposures of GCR or SPE significantly affected tomato early seedling development, delayed tomato fruiting, and reduced the total yield of tomato. Altered nutritional values were also found in edible biomass, especially for the GCR 80 cGy (LDR) groups. Underlying mechanisms were furtherly evaluated using transcriptomic analysis. For both GCR and SPE, 40 cGy showed some effects, but to a much lesser extent compared with 80 cGy, which can be considered as the “maximum permissible exposure” for the seed types we evaluated in this study. The impact of space radiation on seeds potentially affects the ability of plants to adapt to other environmental stresses (e.g. microgravity, water stress, and hardware constraints) as well as susceptibility to plant diseases, which need to be furtherly investigated. This research is funded by NASA’s Human Research Program.

J T Richards↗

NASA NTRSDate not supplied

Impact of Space Radiation on Plant Seeds: from Arabidopsis thaliana to Crops

One of the major concerns for long-term exploration missions beyond the Earth’s magnetosphere is radiation risk, primarily from solar particle events (SPE) and galactic cosmic rays (GCR). With the goal of manned Mars exploration, the production of fresh food during long-duration space missions provides critical nutritional supplementation and may also benefit astronauts’ behavioral health. However, the effects of space radiation on plants and plant propagules have not been sufficiently investigated and characterized. This is the final report of our project to summarize the findings of the effect of space radiation exposure on plant seeds from morphometrics, nutritiaonal values, to molecular machenisms. In this study, we evaluated the effect of simulated GCR (using dry seeds) or SPE (using hydrated seeds) on seeds of Arabidopsis, Mizuna mustard, ‘Outredgeous’ red romaine lettuce, and ‘Red Robin’ dwarf tomato. Seeds were exposed to various doses of simulated space radiation scenarios, either acutely or at a low dose rate (LDR), using the NASA Space Radiation Laboratory (NSRL) facility at Brookhaven National Lab (BNL). Exposure to simulated GCR or SPE at the levels tested had no significant impact on the germination rate in Arabidopsis and crop seeds; however, GCR reduced the viability of lettuce and tomato seeds. Overall, the morphological changes of the seedlings cultured from irradiated seeds were dose- and ion quality- dependent, with heavier ions causing more severe damage. These changes ranged from cotyledon deformation, shortened root length, smaller seedling size, and other signs of stress, depending on the seed types. Both 40 and 80 cGy (LDR) exposures of GCR or SPE significantly affected tomato early seedling development, delayed tomato fruiting, and reduced the total yield of tomato. Altered nutritional values were also found in edible biomass, especially for the GCR 80 cGy (LDR) groups. Underlying mechanisms were furtherly evaluated using transcriptomic analysis. For both GCR and SPE, 40 cGy showed some effects, but to a much lesser extent compared with 80 cGy, which can be considered as the “maximum permissible exposure” for the seed types we evaluated in this study. The impact of space radiation on seeds potentially affects the ability of plants to adapt to other environmental stresses (e.g. microgravity, water stress, and hardware constraints) as well as susceptibility to plant diseases, which need to be furtherly investigated. This research is funded by NASA’s Human Research Program.

J.T. Richards↗

NASA NTRS1985

Nondestructive determination of mechanical properties

The sensitivity of the velocity of ultrasonic waves to the elasticity of the materials (acousto-elastic constant - AEC) as controlled by the microstructure of the materials was examined experimentally. Rolled-plate specimens of five different Al alloys were subjected to tensile tests while being monitored for the velocity change of a 10 MHz longitudinal wave as a function of the applied tensile stress. The acoustic propagation velocity was measured perpendicularly to the stress. Determinations were made of the yield strength and the hardnesses of the specimens. Samples of the plate materials examined microscopically to characterize the solid phases. The AECs varied linearly with the percentage of solid solution phase of the alloys. The trend for strain-hardened samples was, however, opposite from that in the precipitation-hardened alloys. The results underscore the necessity of considering the microstructural dependencies of the AECs when using ultrasonic NDE methods, and also opened the potential of determining some mechanical properties with NDE techniques.

Schneider, E.↗

NASA NTRS1995

Radiative flux opens new window on climate research

For several decades, global satellite observations have been made of the rate at which electromagnetic energy (radiative flux) is emerging from the top of the atmosphere of our planet in the spectral range of about 0.2-50.0 microns. At the same time, models have been developed to infer the radiative flux at the surface from the values observed by the satellites at the upper boundary. The balance of incoming and outgoing radiative flux (radiation budget) at both boundaries, determines the net gain or loss of the radiative energy within an atmospheric column. Climate researchers can use the radiative flux as a tool to validate climate models, separate the radiative impact of clouds from surface and atmosphere contributions, and to understand the global hydrological cycle. When applied to physical processes occurring at the surface, information on the radiative flux has the potential to substantially advance our understanding of the transport of heat, moisture, and momentum across the surface/atmosphere interface. Geophysicists of many disciplines stand to benefit from efforts to improve the use of this latter untapped resource. Oceanographers can improve the representation of the selective absorption of radiation in the oceans; biologists and ecologists can improve their models for carbon dioxide exchange and biological heating in oceans; agronomists can model more realistically biomass and crop yields; and environmentalists can obtain better assessment of natural resources of radiation.

Pinker, R. T.↗

NASA NTRS1996

An analysis of landing rates and separations at the Dallas/Fort Worth International Airport

Advanced air traffic management systems such as the Center/TRACON Automation System (CTAS) should yield a wide range of benefits, including reduced aircraft delays and controller workload. To determine the traffic-flow benefits achievable from future terminal airspace automation, live radar information was used to perform an analysis of current aircraft landing rates and separations at the Dallas/Fort Worth International Airport. Separation statistics that result when controllers balance complex control procedural constraints in order to maintain high landing rates are presented. In addition, the analysis estimates the potential for airport capacity improvements by determining the unused landing opportunities that occur during rush traffic periods. Results suggest a large potential for improving the accuracy and consistency of spacing between arrivals on final approach, and they support earlier simulation findings that improved air traffic management would increase capacity and reduce delays.

Ballin, Mark G.↗

NASA NTRS1997

Numerical Assessment of Four-Port Through-Flow Wave Rotor Cycles with Passage Height Variation

The potential for improved performance of wave rotor cycles through the use of passage height variation is examined. A Quasi-one-dimensional CFD code with experimentally validated loss models is used to determine the flowfield in the wave rotor passages. Results indicate that a carefully chosen passage height profile can produce substantial performance gains. Numerical performance data are presented for a specific profile, in a four-port, through-flow cycle design which yielded a computed 4.6% increase in design point pressure ratio over a comparably sized rotor with constant passage height. In a small gas turbine topping cycle application, this increased pressure ratio would reduce specific fuel consumption to 22% below the un-topped engine; a significant improvement over the already impressive 18% reductions predicted for the constant passage height rotor. The simulation code is briefly described. The method used to obtain rotor passage height profiles with enhanced performance is presented. Design and off-design results are shown using two different computational techniques. The paper concludes with some recommendations for further work.

Paxson, D. E.↗

NASA NTRS2002

Progress Towards High-Sensitivity Arrays of Detectors of Sub-mm Radiation using Superconducting Tunnel Junctions with Radio-Frequency Single-Electron Transistors

The science drivers for the SPIRIT/SPECS missions demand sensitive, fast, compact, low-power, large-format detector arrays for high resolution imaging and spectroscopy in the far infrared and submillimeter. Detector arrays with 10,000 pixels and sensitivity less than 10(exp 20)-20 W/Hz(exp 20)0.5 are needed. Antenna-coupled superconducting tunnel junction detectors with integrated rf single-electron transistor readout amplifiers have the potential for achieving this high level of sensitivity, and can take advantage of an rf multiplexing technique when forming arrays. The device consists of an antenna structure to couple radiation into a small superconducting volume and cause quasiparticle excitations, and a single-electron transistor to measure currents through tunnel junction contacts to the absorber volume. We will describe optimization of device parameters, and recent results on fabrication techniques for producing devices with high yield for detector arrays. We will also present modeling of expected saturation power levels, antenna coupling, and rf multiplexing schemes.

Stevenson, T. R.↗

NASA NTRS2006

Carbon-Nanotube-Carpet Heat-Transfer Pads

Microscopic thermal-contact pads that include carpet-like arrays of carbon nanotubes have been invented for dissipating heat generated in integrated circuits and similarly sized single electronic components. The need for these or other innovative thermal-contact pads arises because the requisite high thermal conductances cannot be realized by scaling conventional macroscopic thermal-contact pads down to microscopic sizes. Overcoming limitations of conventional thermal-contact materials and components, the carbon-nanotube thermal-contact pads offer the high thermal conductivities needed to accommodate the high local thermal power densities of modern electronic circuits, without need for large clamping pressures, extreme smoothness of surfaces in contact, or gap-filling materials (e.g., thermally conductive greases) to ensure adequate thermal contact. Moreover, unlike some conventional thermal-contact components, these pads are reusable. The figure depicts a typical pad according to the invention, in contact with a rough surface on an electronic component that is to be cooled. Through reversible bending and buckling of carbon nanotubes at asperities on the rough surface, the pad yields sufficiently, under relatively low contact pressure, that thermal contact is distributed to many locations on the surface to be cooled, including valleys where contact would not ordinarily occur in conventional clamping of rigid surfaces. Hence, the effective thermal-contact area is greater than that achievable through scaling down of a macroscopic thermal-contact pad. The extremely high longitudinal thermal conductivities of the carbon nanotubes are utilized to conduct heat away from potential hot spots on the surface to be cooled. The fibers protrude from a layer of a filler material (Cu, Ag, Au, or metal-particle- filled gels), which provides both mechanical support to maintain the carbon nanotubes in alignment and thermal conductivity to enhance the diffusion of concentrated heat from the nanotubes into the larger adjacent volume of a heat sink. The array of carbon nanotubes, the filler material, and the heat sink are parts of a unitary composite structure that is fabricated as follows: 1. Using techniques that have been reported previously, the array of substantially perpendicularly oriented carbon nanotubes is grown on a metal, silicon, or other suitable thermally conductive substrate that is intended to become the heat sink. 2. By means of chemical vapor deposition, physical vapor deposition, plasma deposition, ion sputtering, electrochemical deposition, or casting from a liquid phase, some or all of the interstitial volume between carbon nanotubes is filled with the aforementioned layer of mechanically supporting, thermally conductive material. 3. To cause the carbon nanotubes to protrude the desired length from the filler material, an outer layer of filler is removed by mechanical polishing, chemical mechanical polishing, wet chemical etching, electrochemical etching, or dry plasma etching.

Li, Jun↗

NASA NTRS2012

Roadmap for In-Space Propulsion Technology

NASA has created a roadmap for the development of advanced in-space propulsion technologies for the NASA Office of the Chief Technologist (OCT). This roadmap was drafted by a team of subject matter experts from within the Agency and then independently evaluated, integrated and prioritized by a National Research Council (NRC) panel. The roadmap describes a portfolio of in-space propulsion technologies that could meet future space science and exploration needs, and shows their traceability to potential future missions. Mission applications range from small satellites and robotic deep space exploration to space stations and human missions to Mars. Development of technologies within the area of in-space propulsion will result in technical solutions with improvements in thrust, specific impulse (Isp), power, specific mass (or specific power), volume, system mass, system complexity, operational complexity, commonality with other spacecraft systems, manufacturability, durability, and of course, cost. These types of improvements will yield decreased transit times, increased payload mass, safer spacecraft, and decreased costs. In some instances, development of technologies within this area will result in mission-enabling breakthroughs that will revolutionize space exploration. There is no single propulsion technology that will benefit all missions or mission types. The requirements for in-space propulsion vary widely according to their intended application. This paper provides an updated summary of the In-Space Propulsion Systems technology area roadmap incorporating the recommendations of the NRC.

Meyer, Michael↗

NASA NTRS2015

Plume Characterization of a Laboratory Model 22 N GPIM Thruster via High-Frequency Raman Spectroscopy

The Green Propellant Infusion Mission (GPIM) will demonstrate the capability of a green propulsion system, specifically, one using the monopropellant, AF-M315E. One of the risks identified for GPIM is potential contamination of sensitive areas of the spacecraft from the effluents in the plumes of AF-M315E thrusters. Plume characterization of a laboratory-model 22 N thruster via optical diagnostics was conducted at NASA GRC in a space-simulated environment. A high-frequency pulsed laser was coupled with an electron-multiplied ICCD camera to perform Raman spectroscopy in the near-field, low-pressure plume. The Raman data yielded plume constituents and temperatures over a range of thruster chamber pressures and as a function of thruster (catalyst) operating time. Schlieren images of the near-field plume enabled calculation of plume velocities and revealed general plume structure of the otherwise invisible plume. The measured velocities are compared to those predicted by a two-dimensional, kinetic model. Trends in data and numerical results are presented from catalyst mid-life to end-of-life. The results of this investigation were coupled with the Raman and Schlieren data to provide an anchor for plume impingement analysis presented in a companion paper. The results of both analyses will be used to improve understanding of the nature of AF-M315E plumes and their impacts to GPIM and other future missions.

Raman Spectroscopy↗

NASA NTRS2014

In Situ Radiometric and Exposure Age Dating of the Martian Surface

We determined radiogenic and cosmogenic noble gases in a mudstone on the floor of Gale Crater. A K-Ar age of 4.21 +/- 0.35 billion years represents a mixture of detrital and authigenic components and confirms the expected antiquity of rocks comprising the crater rim. Cosmic-ray-produced 3He, 21Ne, and 36Ar yield concordant surface exposure ages of 78 T 30 million years. Surface exposure occurred mainly in the present geomorphic setting rather than during primary erosion and transport. Our observations are consistent with mudstone deposition shortly after the Gale impact or possibly in a later event of rapid erosion and deposition. The mudstone remained buried until recent exposure by wind-driven scarp retreat. Sedimentary rocks exposed by this mechanism may thus offer the best potential for organic biomarker preservation against destruction by cosmic radiation.

age dating↗

NASA NTRS2015

An Integrated Physics-Based Risk Model for Assessing the Asteroid Threat

Although most asteroids and other near-Earth objects (NEOs) do not pose a threat to Earth’s inhabitants, impacts from objects that are just tens of meters in diameter can cause significant damage if they occur over a populated area. This paper forms the foundation of an effort at NASA Ames Research Center to quantify these risks and identify the greatest risk-driving parameters and uncertainties. An integrated risk model that couples dynamic probabilistic simulations of strike occurrences with physics-based models of NEO impact damage factors has been developed to generate casualty estimates for a range of NEO impact properties. Currently, the model focuses on the risk due to blast overpressure damage from airbursts and impacts on land. The model is first used to reproduce results from established sources, and then is extended to perform sensitivity studies that yield greater insights into risk driving parameters. Results show that meteor strength and entry angle play a role for small to mid-size NEOs, and that accounting for the specific target location significantly affects casualty estimates and dominates the risk. Future work will continue to refine and expand the models to better characterize key impact risk factors, include additional types of threats such as tsunamis and climate effects, and ultimately support assessments of potential asteroid mitigation strategies.

Asteroid Threat↗

NASA NTRS2023

Plant Disease Detection: Exploring Applications in Hyperspectral Imaging and Machine Learning for Agriculture

The threat of crop disease on food security and agriculture is projected to escalate, leading to reduced crop yields, global economic loss, and endangered food availability to vulnerable populations. Early identification of plant disease is crucial to combatting the crisis but traditional manual methods for disease detection are laborious and may miss early signs of infection. The proposed solution suggests equipping a drone with a hyperspectral camera to collect images and analyzing the data with neural networks trained to flag and classify infected plants. This approach offers a faster, more accurate, and potentially more cost-effective alternative to current practices. While the expensive and complex nature of hyperspectral imaging (HSI) may be an obstacle to the adoption of the drone, rapidly advancing technologies compounded with rental-based usage may make these tools simpler, cheaper, and more accessible to a wider audience. The research further discusses the potential for automated flight paths and the expansion of disease detection to a broader range of crops.

plant disease detection↗

NASA NTRS1986

The high-temperature oxidation of aromatic hydrocarbons

Chemical mechanisms of the atmospheric pressure, high-temperature (875-1500 K) gas-phase oxidation of benzene, toluene, ethylbenzene, and propylbenzene are described and discussed. Oxidation trends evident from turbulent flow reactor experiments serve as the basis for the mechanisms of the oxidation of benzene and alkylated aromatics. The potential effects of very high temperatures and pressures on the chemistry of oxidation of aromatics are described. The oxidation of benzene and phenyl radical has been found to proceed in a stepwise C6-C5-C4 sequence. Species profiles obtained from flow-reactor experiments suggest that the oxidation of benzene and phenyl radical follows the generalized route via phenoxy, cyclopentadienyl and butadienyl radical. The oxidation of the C4 species branches into multiple pathways that yield copious amounts of ethylene and acetylene. Certain major trends are evident: the alkylated aromatics on initial attack either form styrene, benzyl radical or benzene. The styrene reacts further to produce a benzyl radical or benzene. The oxidation of an alkylated aromatic hydrocarbon appears eventually to reduce to the oxidation of either phenyl radical or benzene.

Brezinsky, K.↗