Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “performance testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Beam-induced backgrounds measured in the ATLAS detector during local gas injection into the LHC beam vacuum

Inelastic beam-gas collisions at the Large Hadron Collider (LHC), within a few hundred metres of the ATLAS experiment, are known to give the dominant contribution to beam backgrounds. These are monitored by ATLAS with a dedicated Beam Conditions Monitor (BCM) and with the rate of fake jets in the calorimeters. These two methods are complementary since the BCM probes backgrounds just around the beam pipe while fake jets are observed at radii of up to several metres. In order to quantify the correlation between the residual gas density in the LHC beam vacuum and the experimental backgrounds recorded by ATLAS, several dedicated tests were performed during LHC Run 2. Local pressure bumps, with a gas density several orders of magnitude higher than during normal operation, were introduced at different locations. The changes of beam-related backgrounds, seen in ATLAS, are correlated with the local pressure variation. In addition the rates of beam-gas events are estimated from the pressure measurements and pressure bump profiles obtained from calculations. Using these rates, the efficiency of the ATLAS beam background monitors to detect beam-gas events is derived as a function of distance from the interaction point. These efficiencies and characteristic distributions of fake jets from the beam backgrounds are found to be in good agreement with results of beam-gas simulations performed with theFluka Monte Carlo programme.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Silicon pinhole strip defects and their impact on ATLAS Inner Tracker HV current measurement

In preparation for the High-Luminsity LHC (HL-LHC) [1], the ATLAS detector will undergo major detector upgrades, including the replacement of the current Inner Detector with the new all-silicon Inner Tracker (ITk) [2]. The ITk consists of a pixel detector close to the beamline surrounded by a large-area strip detector. During detector production, the electrical properties of silicon sensors and readout electronics must be characterized through a series of quality control (QC) and quality assurance tests. These tests ensure any defect is captured at the earliest possible stage. One such defect, callled a pinhole, occurs when the strip implant and the metal readout electrode are shorted through the intermediary dielectric layer. Notably, the introduction of pinholes during module assembly and pinhole effects on completed modules, especially on leakage current measurement circuitry, have never been studied. In this paper, we investigate the effect of such connections on the sensor leakage current measurements of completed modules and introduce new ways to locate pinholed strips. Here, with minor modifications to testing procedures, such defects are shown not to impede module testing or performance.

FOS: Physical sciences↗
DOE OSTI2026

The BUTTON-30 detector at Boulby

The BUTTON-30 detector is a 30-tonne technology demonstrator designed to evaluate the potential of hybrid event detection, simultaneously exploiting both Cherenkov and scintillation light to detect particles produced in neutrino interactions. The detector is installed at a depth of 1.1 km in the Boulby Underground Laboratory allowing to test the performance of this new technology underground in a low background environment. This paper describes the design and construction of the experiment.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Machine learning models inaccurately predict current and future high-latitude C balances

The high-latitude carbon (C) cycle is a key feedback to the global climate system, yet because of system complexity and data limitations, there is currently disagreement over whether the region is a source or sink of C. Recent advances in big data analytics and computing power have popularized the use of machine learning (ML) algorithms to upscale site measurements of ecosystem processes, and in some cases forecast the response of these processes to climate change. Due to data limitations, however, ML model predictions of these processes are almost never validated with independent datasets. To better understand and characterize the limitations of these methods, we develop an approach to independently evaluate ML upscaling and forecasting. We mimic data-driven upscaling and forecasting efforts by applying ML algorithms to different subsets of regional process-model simulation gridcells, and then test ML performance using the remaining gridcells. In this study, we simulate C fluxes and environmental data across Alaska using ecosys, a process-rich terrestrial ecosystem model, and then apply boosted regression tree ML algorithms to training data configurations that mirror and expand upon existing AmeriFLUX eddy-covariance data availability. We first show that a ML model trained using ecosys outputs from currently-available Alaska AmeriFLUX sites incorrectly predicts that Alaska is presently a modeled net C source. Increased spatial coverage of the training dataset improves ML predictions, halving the bias when 240 modeled sites are used instead of 15. However, even this more accurate ML model incorrectly predicts Alaska C fluxes under 21st century climate change because of changes in atmospheric CO 2 , litter inputs, and vegetation composition that have impacts on C fluxes which cannot be inferred from the training data. Our results provide key insights to future C flux upscaling efforts and expose the potential for inaccurate ML upscaling and forecasting of high-latitude C cycle dynamics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Multi-fidelity learning for interatomic potentials: low-level forces and high-level energies are all you need

The promise of machine learning interatomic potentials (MLIPs) has led to an abundance of public quantum mechanical (QM) training datasets. The quality of an MLIP is directly limited by the accuracy of the energies and atomic forces in the training dataset. Unfortunately, most of these datasets are computed with relatively low-accuracy QM methods, e.g. density functional theory with a moderate basis set. Due to the increased computational cost of more accurate QM methods, e.g. coupled-cluster theory with a complete basis set (CBS) extrapolation, most high-accuracy datasets are much smaller and often do not contain atomic forces. The lack of high-accuracy atomic forces is quite troubling, as training with force data greatly improves the stability and quality of the MLIP compared to training to energy alone. Because most datasets are computed with a unique level of theory, traditional single-fidelity (SF) learning is not capable of leveraging the vast amounts of published QM data. In this study, we apply multi-fidelity learning (MFL) to train an MLIP to multiple QM datasets of different levels of accuracy, i.e. levels of fidelity. Specifically, we perform three test cases to demonstrate that MFL with both low-level forces and high-level energies yields an extremely accurate MLIP—far more accurate than a SF MLIP trained solely to high-level energies and almost as accurate as a SF MLIP trained directly to high-level energies and forces. Therefore, MFL greatly alleviates the need for generating large and expensive datasets containing high-accuracy atomic forces and allows for more effective training to existing high-accuracy energy-only datasets. Indeed, low-accuracy atomic forces and high-accuracy energies are all that are needed to achieve a high-accuracy MLIP with MFL.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Efficient DNA sequence compression with neural networks

Abstract Background The increasing production of genomic data has led to an intensified need for models that can cope efficiently with the lossless compression of DNA sequences. Important applications include long-term storage and compression-based data analysis. In the literature, only a few recent articles propose the use of neural networks for DNA sequence compression. However, they fall short when compared with specific DNA compression tools, such as GeCo2. This limitation is due to the absence of models specifically designed for DNA sequences. In this work, we combine the power of neural networks with specific DNA models. For this purpose, we created GeCo3, a new genomic sequence compressor that uses neural networks for mixing multiple context and substitution-tolerant context models. Findings We benchmark GeCo3 as a reference-free DNA compressor in 5 datasets, including a balanced and comprehensive dataset of DNA sequences, the Y-chromosome and human mitogenome, 2 compilations of archaeal and virus genomes, 4 whole genomes, and 2 collections of FASTQ data of a human virome and ancient DNA. GeCo3 achieves a solid improvement in compression over the previous version (GeCo2) of $2.4\%$, $7.1\%$, $6.1\%$, $5.8\%$, and $6.0\%$, respectively. To test its performance as a reference-based DNA compressor, we benchmark GeCo3 in 4 datasets constituted by the pairwise compression of the chromosomes of the genomes of several primates. GeCo3 improves the compression in $12.4\%$, $11.7\%$, $10.8\%$, and $10.1\%$ over the state of the art. The cost of this compression improvement is some additional computational time (1.7–3 times slower than GeCo2). The RAM use is constant, and the tool scales efficiently, independently of the sequence size. Overall, these values outperform the state of the art. Conclusions GeCo3 is a genomic sequence compressor with a neural network mixing approach that provides additional gains over top specific genomic compressors. The proposed mixing method is portable, requiring only the probabilities of the models as inputs, providing easy adaptation to other data compressors or compression-based data analysis tools. GeCo3 is released under GPLv3 and is available for free download at https://github.com/cobilab/geco3.

Silva, Milton↗
DOE OSTI2021

On the dark matter haloes of optical and IR-selected AGNs in the local universe

ABSTRACT We use the technique of total satellite luminosity, Lsat, to probe the dark matter haloes around active galactic nuclei (AGNs) in the SDSS Main Galaxy Sample. Our results focus on galaxies and AGNs that are the central galaxy of their halo. Our two AGN samples are constructed from optical emission-line diagnostics and from Wide-Field Infrared Survey Explorer (WISE) infrared colours. Both optically selected and WISE-selected AGN have Lsat values twice as high as non-active galaxy samples when controlling for stellar mass and mean stellar age. This implies that the haloes are twice as massive, but we cannot rule out that the increase in Lsat is due to these AGNs residing in younger haloes at the same mass. When only controlling for host galaxy stellar mass, WISE-selected AGNs also have higher Lsat values than optical AGNs at the factor of two level, consistent with previous results comparing the clustering of obscured and unobscured AGNs. However, controlling for stellar age in the two populations of host galaxies removes half of this difference, attenuating the statistical significance of the difference. We perform permutation tests to quantify the difference in the halo populations of each sample. The difference in star formation properties does not fully explain the difference in the two AGN populations, however. Although AGN luminosity correlates with mean stellar age, the difference in stellar age between the WISE and optical samples cannot be fully explained by differences in their AGN luminosity distributions.

Alpaslan, Mehmet (ORCID:0000000303211033)↗
DOE OSTI2023

Critical assessment of the recent report on the gigaparsec-scale correlation of the orientations of large quasar groups

ABSTRACT Recently, it was reported that large quasar groups (LQGs) identified from the Sloan Digital Sky Survey (SDSS) data release seven catalogue are not randomly oriented but preferentially aligned or orthogonal over scales 1–2 Gpc. To confirm this claim, I reproduced the same LQG sample and performed Sobolev tests of uniformity on the LQG orientation axes in the redshift space. Contrary to the original report based on the bimodal distribution of the LQG position angles in the sky, I found no departure from uniformity in the distribution of the LQG orientation axes. I also examined whether the LQGs are physical structures using a statistically more reliable data set constructed from the SDSS data release 16 (DR16) large-scale structure (LSS) quasar catalogue. Considering the Gaussian primordial density fluctuations and shot noise, I estimated the mass density contrasts of the LQGs from the number counts of the DR16 LSS quasars and found that most of the LQGs do not trace statistically significant high-density regions. I conclude that the LQG sample is a collection of unphysical chance associations and should not be used for any cosmological studies.

Fujii, Hirokazu (ORCID:0000000161473512)↗
DOE OSTI2023

The two-point correlation function covariance with fewer mocks

We present FITCOV an approach for accurate estimation of the covariance of two-point correlation functions that requires fewer mocks than the standard mock-based covariance. This can be achieved by dividing a set of mocks into jackknife regions and fitting the correction term first introduced in Mohammad & Percival (2022), such that the mean of the jackknife covariances corresponds to the one from the mocks. This extends the model beyond the shot-noise limited regime, allowing it to be used for denser samples of galaxies. We test the performance of our fitted jackknife approach, both in terms of accuracy and precision, using lognormal mocks with varying densities and approximate EZmocks mimicking the Dark Energy Spectroscopic Instrument LRG and ELG samples in the redshift range of z = [0.8, 1.1]. We find that the Mohammad–Percival correction produces a bias in the two-point correlation function covariance matrix that grows with number density and that our fitted jackknife approach does not. We also study the effect of the covariance on the uncertainty of cosmological parameters by performing a full-shape analysis. We demonstrate that our fitted jackknife approach based on 25 mocks can recover unbiased and as precise cosmological parameters as the ones obtained from a covariance matrix based on 1000 or 1500 mocks, while the Mohammad–Percival correction produces uncertainties that are twice as large.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

guppy i : a code for reducing the storage requirements of cosmological simulations

ABSTRACT As cosmological simulations have grown in size, the permanent storage requirements of their particle data have also grown. Even modest simulations present a major logistical challenge for the groups which run these boxes and researchers without access to high performance computing facilities often need to restrict their analysis to lower quality data. In this paper, we present guppy, a compression algorithm and code base tailored to reduce the sizes of dark matter-only cosmological simulations by approximately an order of magnitude. guppy is a ‘lossy’ algorithm, meaning that it injects a small amount of controlled and uncorrelated noise into particle properties. We perform extensive tests on the impact that this noise has on the internal structure of dark matter haloes, and identify conservative accuracy limits which ensure that compression has no practical impact on single-snapshot halo properties, profiles, and abundances. We also release functional prototype libraries in C, Python, and Go for reading and creating guppy data.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Exploiting 20 Ne Isotopes for Precision Characterizations of Collectivity in Small Systems

Whether or not femto-scale droplets of quark-gluon plasma (QGP) are formed in so-called small systems at high-energy colliders is a pressing question in the phenomenology of the strong interaction. For proton-proton or proton-nucleus collisions the answer is inconclusive due to the large theoretical uncertainties plaguing the description of these processes. While upcoming data on collisions of 16 O nuclei may mitigate these uncertainties in the near future, here we demonstrate the unique possibilities offered by complementing 16 O + 16 O data with collisions of 20 Ne ions. We couple both nuclear lattice effective field theory (NLEFT) and projected generator coordinate method (PGCM) ab initio descriptions of the structure of 20 Ne and 16 O to hydrodynamic simulations of 16 O + 16 O and 20 Ne + 20 Ne collisions at high energy. We isolate the imprints of the bowling-pin shape of 20 Ne on the collective flow of hadrons, which can be used to perform quantitative tests of the hydrodynamic QGP paradigm. In particular, we predict that the elliptic flow of 20 Ne + 20 Ne collisions is enhanced by as much as 1.174⁢(8) stat ⁢(31) syst for NLEFT and 1.139⁢(6) stat ⁢(39) syst for PGCM relative to 16 O + 16 O collisions for the 1% most central events. At the same time, theoretical uncertainties largely cancel when studying relative variations of observables between two systems. This demonstrates a method based on experiments with two light-ion species for precision characterizations of the collective dynamics and its emergence in a small system.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Quantum Computer-Aided Design: Digital Quantum Simulation of Quantum Processors

With the increasing size of quantum processors, submodules that constitute the processor hardware will become too large to accurately simulate on a classical computer. Therefore, one would soon have to fabricate and test each new design primitive and parameter choice in time-consuming coordination between design, fabrication, and experimental validation. Here we show how one can design and test the performance of next-generation quantum hardware—by using existing quantum computers. Focusing on superconducting transmon processors as a prominent hardware platform, we compute the static and dynamic properties of individual and coupled transmons. We show how the energy spectra of transmons can be obtained by variational hybrid quantum-classical algorithms that are well suited for near-term noisy quantum computers. In addition, single- and two-qubit gate simulations are demonstrated via Suzuki-Trotter decomposition. Our methods pave a promising way towards designing candidate quantum processors when the demands of calculating submodule properties exceed the capabilities of classical computing resources.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Towards accurate orbital-free simulations: A generalized gradient approximation for the noninteracting free energy density functional

For orbital-free ab initio molecular dynamics, especially on systems in extreme thermodynamic conditions, we provide the first pseudo-potential-adapted generalized gradient approximation (GGA) functional for the non-interacting free energy. This is achieved by systematic finite-temperature extension of our recent LKT ground state non-interacting kinetic energy GGA functional (Phys. Rev. B 98, 041111(R) (2018)). We test the performance of the new functional first via static lattice calculations on crystalline aluminum and silicon. Then we compare deuterium equation of state results against both path-integral Monte Carlo and conventional (orbital-dependent) Kohn-Sham results. The new functional, denoted LKTF, outperforms the previous best semi-local free energy functional, VT84F (Phys. Rev. B 88, 161108(R) (2013)), and provides modestly faster simulations. Finally, we discuss subtleties of identification of kinetic and entropic contributions to non-interacting free-energy functionals obtained by extension from ground state orbital-free kinetic energy functionals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Deconvoluting experimental decay energy spectra: The O 26 case

In nuclear reaction experiments, the measured decay energy spectra can give insights into the shell structure of decaying systems. However, extracting the underlying physics from the measurements is challenging due to detector resolution and acceptance effects. The Richardson-Lucy (RL) algorithm, a deblurring method that is commonly used in optics and has proven to be a successful technique for restoring images, was applied to our experimental nuclear physics data. The only inputs to the method are the observed energy spectrum and the detector's response matrix also known as the transfer matrix. We demonstrate that the technique can help access information about the shell structure of particle-unbound systems from the measured decay energy spectrum that is not immediately accessible via traditional approaches such as χ-square fitting. For a similar purpose, we developed a machine learning model that uses a deep neural network (DNN) classifier to identify resonance states from the measured decay energy spectrum. We tested the performance of both methods on simulated data and experimental measurements. Then, we applied both algorithms to the decay energy spectrum of 26 O → 24 O + n + n measured via invariant mass spectroscopy. Here, the resonance states restored using the RL algorithm to deblur the measured decay energy spectrum agree with those found by the DNN classifier. Both deblurring and DNN approaches suggest that the raw decay energy spectrum of 26 O exhibits three peaks at approximately 0.15 MeV, 1.50 MeV, and 5.00 MeV, with half-widths of 0.29 MeV, 0.80 MeV, and 1.85 MeV, respectively.

Spectrometers & spectroscopic techniques↗
DOE OSTI2022

Dark Energy Survey Year 3 results: Exploiting small-scale information with lensing shear ratios

Using the first three years of data from the Dark Energy Survey (DES), we use ratios of small-scale galaxy-galaxy lensing measurements around the same lens sample to constrain source redshift uncertainties, intrinsic alignments and other systematics or nuisance parameters of our model. Instead of using a simple geometric approach for the ratios as has been done in the past, we use the full modeling of the galaxy-galaxy lensing measurements, including the corresponding integration over the power spectrum and the contributions from intrinsic alignments and lens magnification. We perform extensive testing of the small-scale shear-ratio (SR) modeling by studying the impact of different effects such as the inclusion of baryonic physics, nonlinear biasing, halo occupation distribution descriptions and lens magnification, among others, and using realistic N -body simulations of the DES data. We validate the robustness of our constraints in the data by using two independent lens samples with different galaxy properties, and by deriving constraints using the corresponding large-scale ratios for which the modeling is simpler. The results applied to the DES Y3 data demonstrate how the ratios provide significant improvements in constraining power for several nuisance parameters in our model, especially on source redshift calibration and intrinsic alignments. For source redshifts, SR improves the constraints from the prior by up to 38% in some redshift bins. Such improvements, and especially the constraints it provides on intrinsic alignments, translate to tighter cosmological constraints when shear ratios are combined with cosmic shear and other 2pt functions. In particular, for the DES Y3 data, SR improves S 8 constraints from cosmic shear by up to 31%, and for the full combination of probes ( 3 × 2 pt ) by up to 10%. The shear ratios presented in this work are used as an additional likelihood for cosmic shear, 2 × 2 pt and the full 3 × 2 pt in the fiducial DES Y3 cosmological analysis.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Dark Energy Survey year 3 results: Constraints on cosmological parameters and galaxy-bias models from galaxy clustering and galaxy-galaxy lensing using the redMaGiC sample

We constrain cosmological parameters and galaxy-bias parameters using the combination of galaxy clustering and galaxy-galaxy lensing measurements from the Dark Energy Survey (DES) year-3 data. We describe our modeling framework and choice of scales analyzed, validating their robustness to theoretical uncertainties in small-scale clustering by analyzing simulated data. Using a linear galaxy-bias model and redMaGiC galaxy sample, we obtain 10% constraints on the matter density of the Universe. Here, we also implement a nonlinear galaxy-bias model to probe smaller scales that includes parametrization based on hybrid perturbation theory and find that it leads to a 17% gain in cosmological constraining power. We perform robustness tests of our methodology pipeline and demonstrate stability of the constraints to changes in the theory model. Using the redMaGiC galaxy sample as foreground lens galaxies and adopting the best-fitting cosmological parameters from DES year-1 data, we find the galaxy clustering and galaxy-galaxy lensing measurements to exhibit significant signals akin to decorrelation between galaxies and mass on large scales, which is not expected in any current models. This likely systematic measurement error biases our constraints on galaxy bias and the S 8 parameter. We find that a scale-, redshift- and sky-area-independent phenomenological decorrelation parameter can effectively capture this inconsistency between the galaxy clustering and galaxy-galaxy lensing. We trace the source of this correlation to a color-dependent photometric issue and minimize its impact on our result by changing the selection criteria of redMaGiC galaxies. Using this new sample, our constraints on the S 8 parameter are consistent with previous studies and we find a small shift in the Ω m constraints compared to the fiducial redMaGiC sample. We infer the constraints on the mean host-halo mass of the redMaGiC galaxies in this new sample from the large-scale bias constraints, finding the galaxies occupy halos of mass approximately 1.6 × 10 13 M ⊙ /h.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Measurement of lepton universality parameters in B + → K + ℓ + ℓ – and B 0 → K* 0 ℓ + ℓ – decays

A simultaneous analysis of the B + → K + ℓ + ℓ – and B 0 → K* 0 ℓ + ℓ – decays is performed to test muon-electron universality in two ranges of the square of the dilepton invariant mass, q 2 . The measurement uses a sample of beauty meson decays produced in proton-proton collisions collected with the LHCb detector between 2011 and 2018, corresponding to an integrated luminosity of 9 fb –1 . A sequence of multivariate selections and strict particle identification requirements produce a higher signal purity and a better statistical sensitivity per unit luminosity than previous LHCb lepton universality tests using the same decay modes. Residual backgrounds due to misidentified hadronic decays are studied using data and included in the fit model. Each of the four lepton universality measurements reported is either the first in the given q 2 interval or supersedes previous LHCb measurements. The results are compatible with the predictions of the Standard Model.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Constraining gravity with a new precision 𝐸 𝐺 estimator using Planck + SDSS BOSS data

The 𝐸 𝐺 statistic is a discriminating probe of gravity developed to test the prediction of general relativity (GR) for the relation between gravitational potential and clustering on the largest scales in the observable Universe. We present a novel high-precision estimator for the 𝐸 𝐺 statistic using CMB lensing and galaxy clustering correlations that carefully matches the effective redshifts across the different measurement components to minimize corrections. A suite of detailed tests is performed to characterize the estimator’s accuracy, its sensitivity to assumptions and analysis choices, and the non-Gaussianity of the estimator’s uncertainty is characterized. After finalization of the estimator, it is applied to Planck CMB lensing and SDSS CMASS and LOWZ galaxy data. We report the first harmonic space measurement of 𝐸 𝐺 using the LOWZ sample and CMB lensing and also updated constraints using the final CMASS sample and the latest Planck CMB lensing map. We find $\hat{𝐸}$$^{Planck+CMASS}_{𝐺}$ = 0.3⁢6$^{+0.06}_{−0.05}$⁢(68.27%) and $\hat{𝐸}$$^{Planck+LOWZ}_{𝐺}$ = 0.4⁢0$^{+0.11}_{−0.09}$⁢(68.27%), with additional subdominant systematic error budget estimates of 2% and 3%, respectively. Using Ω m,0 constraints from Planck and SDSS BAO observations, Λ⁢CDM-GR predicts 𝐸$^{GR}_ {𝐺}$⁡(𝑧 =0.555) = 0.401 ± 0.005 and 𝐸$^{GR}_{𝐺}$⁡(𝑧 =0.316) = 0.452 ± 0.005 at the effective redshifts of the CMASS and LOWZ based measurements. We report the measurement to be in good statistical agreement with the Λ⁢CDM-GR prediction and report that the measurement is also consistent with the more general GR prediction of scale independence for 𝐸 𝐺 . Furthermore, this work provides a carefully constructed and calibrated statistic with which 𝐸 𝐺 measurements can be confidently and accurately obtained with upcoming survey data.

79 ASTRONOMY AND ASTROPHYSICS↗