SEARCH · Engineering Papers

Results for “parabolic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

All sources NASA NTRS DOE OSTI

NASA NTRS1973

Human eye movements during various forms of linear acceleration and weightlessness

Eye movements of human subjects were recorded electronystagmographically in complete darkness during rectilinear horizontal accelerations as achieved in cars on the ground and also during aircraft parabolic flight. The results were compared to the movements of blinded goldfish subjected to similar changes of gravitoinertial forces. The results indicate that there is a human correlation with the gravity reference response of fish. During horizontal forward accelerations on the ground the human eyes turn downward and during horizontal backward acceleration the eyes turn upward. The human eye response to g-loads below 1 g and to weightlessness is the reverse of the tilt of the fish. While fish dive down during low g, or loop forward during weightlessness, the eyes of subjects sitting upright in an aircraft which flies at 0 g move upward.

Vonbaumgarten, R. J.↗

NASA NTRS1973

CONIC program user's manual

A user's manual for the current CONIC computer program is presented. The program was written in FORTRAN for use on the TRW Time Share system. The CONIC program is used to calculate the relative motion of two bodies in any conic-section orbit (circular, elliptical, parabolic, or hyperbolic). This manual describes the basic equations used for trajectory propagation and defines the input and output parameters of the program. Sample runs with corresponding figures and a detailed flow chart of the program are included.

Source record↗

NASA NTRS1974

The influence of polarization on millimeter wave propagation through rain

The influence of polarization on millimeter wave propagation through rain is investigated. The experimental equipment consisted of a 1.43 km line-of-sight path with 4-foot diameter dual-polarized parabolic reflector antennas at each end. Linearly polarized 17.65 GHz signals were transmitted with the electric field vectors at plus 45 degrees and minus 45 degrees from the vertical. These polarizations were initially chosen to maximize the measured depolarization at any given rainfall rate. Later it was discovered that the cross polarization levels measured with plus or minus 45 degree linearly polarized signals are theoretically the least sensitive to variations in drop canting angle and this choice of polarization reduces the scatter in the data.

Bostian, C. W.↗

NASA NTRS1974

The effect of yttrium and thorium on the oxidation behavior of Ni-Cr-Al alloys

The effect of quaternary additions of 0.5% Y, 0.5 and 1.0% Th to a base alloy of Ni-10CR-5Al on the oxidation behavior and mechanism was studied during oxidation in air over the range of 1000 to 1200 C. The presence of yttrium decreased the oxidation kinetics slightly, whereas, the addition of thorium caused a slight increase. Oxide scale adherence was markedly improved by the addition of the quaternary elements. Although a number of oxides formed on yttrium containing alloys, quantitative X-ray diffraction clearly showed that the rate-controlling step was the diffusion of aluminum through short circuit paths in a thin layer of alumina that formed parabolically with time. Although the scale adherence of the yttrium containing alloy was considerably better than the base alloys, spalling did occur that was attributed to the formation of the voluminous YAG particles which grew in a mushroom-like manner, lifting the protective scale off the subrate locally. The YAG particles formed primarily at grain boundaries in the substrate in which the yttrium originally existed as YNi9.

Kumar, A.↗

NASA NTRS1974

Improved solution for potential flow about arbitrary axisymmetric bodies by the use of a higher-order surface source method. Part 1. Theory and results

The surface-source method of calculating potential flow is improved by refining the underlying numerical analysis. The analysis uses parabolic elements and linearly-varying source density. The result is a large increase in computing speed and accuracy. The theory is described, and the effectiveness of the modification is illustrated.

Hess, J. L.↗

NASA NTRS1974

Improved solution for potential flow about arbitrary axisymmetric bodies by the use of a higher-order surface source method. Part 2. User's manual for computer program

The surface-source method of calculating potential flow is improved by refining the underlying numerical analysis. The present analysis uses parabolic elements and linearly-varying source density which results in a large increase in computing speed and accuracy. The computer program including all relevant input and output is described.

Friedman, D. M.↗

NASA NTRS1973

Lunar polarization studies at 3.1 mm wavelength

Observations of the distribution of linearly polarized lunar thermal emission were made at a wavelength of 3.1 mm with The University of Texas 4.88 m parabolic reflector (0.042 deg HPBW). A shadow corrected, rough surface, thermal emission model for a homogeneous moon was least-squares-fitted to the polarization data. Results indicate an effective lunar dielectric constant of 1.34 plus or minus 0.04 with surface roughness characterized by a standard deviation of 17 (plus or minus 5) deg for surface slopes with a normal probability density, independent of lunar phase. A comparison of these results with published values at other wavelengths suggests that the effective lunar dielectric constant, as obtained by lunar emission measurements, decreases with decreasing wavelength of observation. This wavelength dependence may be interpreted in terms of an inhomogeneous surface and/or a surface that possesses intermediate scale surface roughness.

White, T. L.↗

NASA NTRS1973

Some experiments related to L-star instability in rocket motors

The influence of condensed phase heterogeneity on the L-star instability of nonmetallized AP/PBAN propellants is explored using four propellants (with monomodal AP particle distributions having 50 per cent weight average points at 11, 39.5, 175, and 350 microns). An economical firing program is used. One-dimensional nature of the Helmholtz mode and the complex nature of the chuff mode are revealed through color movies. The stability boundary on the L-star pressure plot is found to be parabolic. Frequency correlations and many other features reveal the important role of condensed phase details in propellant combustion.

Kumar, R. N.↗

NASA NTRS1973

The gravity reference response, the rotation sensation, and other illusory sensations experienced in aircraft and space flight

An analysis of the gravitational and inertial forces which act during aircraft flight upon the vestibular systems of the aircraft occupants reveals that in the absence of a visual horizon, certain illusory sensations are predictable for various acceleration environments. The 'inversion illusion' (Graybiel and Kellog, 1966) felt by some human subjects at 0 g seems to be different from the rotation sensation and could be caused by the diminished pressure forces of the otoliths on the maculae. The 'inversion illusion' of man correlates well with the blind fish diving behavior observed during aircraft parabolic flight (von Baumgarten et al., 1969, 1972). It is suggested that the fish low g diving response and the human inversion illusion are due to the substitution of a predominantly shearing force of low magnitude as a vestibular reference in place of a normal, predominantly pressure force. This hypothesis indicates that vestibular senses alone cannot provide meaningful postural orientation to simulated or actual gravity of a magnitude below that of earth's gravity.

Shillinger, G. L., Jr.↗

NASA NTRS1974

Effect of mean-velocity profile shapes on sound transmission through two-dimensional ducts

Acoustic propagation through a lined two-dimensional duct is examined in order to assess the influence of the shape of the mean-velocity profile on the attenuation rate. Five mean-velocity profiles are considered: linear, parabolic, Pohlhausen, 1/7th power law with a linear sub-layer, and linear with slip at the wall. It is shown that when the attenuation rate is tabulated as a function of the boundary-layer thickness, as is usually done, substantially different results are obtained from the several mean profiles. However, when the displacement thickness is used, a considerable collapse is achieved in the attenuation curves that are obtained from the various profiles. For downstream propagation, all profiles produce essentially the same results over a reasonable range of boundary-layer thickness. However, for many cases of upstream propagation, the results from the 'turbulent' boundary-layer profiles differ significantly from the results of the other profiles even when compared on the basis of displacement thickness.

Hayfeh, A. H.↗

NASA NTRS1974

Propagation of pulse trains through a random medium

Applying the parabolic approximation, the equations for two-frequency symmetric and antisymmetric mutual intensity functions for waves propagating through a random medium are derived, including the multiple scattering effects. These functions are applied to derive the general formulas for the covariance functions of narrow-band pulses. They are used to compute the signal intensities for pulse trains passing through an ionospheric irregularity slab.

Liu, C. H.↗

NASA NTRS1974

Integrated laser/radar satellite ranging and tracking system

A laser satellite ranging system that is mounted upon and integrated with a microwave tracking radar is reported. The 1-pulse/sec ruby laser transmitter is attached directly to the radar's elevation axis and radiates through a new opening in the radar's parabolic dish. The laser photomultiplier tube receiver utilizes the radar's existing 20-cm diam f/11 boresight telescope and observes through a similar symmetrically located opening in the dish. The laser system possesses separate ranging system electronics but shares the radar's timing, computer, and data handling/recording systems. The basic concept of the laser/radar is outlined together with a listing of the numerous advantages over present singular laser range-finding systems. The developmental laser hardware is described along with preliminary range-finding results and expectations.

Hoge, F. E.↗

NASA NTRS1975

Variable-beamwidth antenna without moving parts

Basic configuration consists of large parabolic dish reflector, smaller hyperboloidal subreflector, and two sets of monopulse feeds located in conjugate focal region on boresight axis of dish.

Deerkoski, L. F.↗

NASA NTRS1975

Networks systems and operations

The application of wideband communication techniques for data links with satellites is discussed. A diagram of the demand assigned voice communications system is provided. The development of prototype integrated spacecraft paramps at S- and C-bands is described and the performance of space-qualified paramps is tabulated. The characteristics of a dual parabolic cylinder monopulse zoom antenna for use with the tracking and data relay satellite system (TDRSS) are analyzed. The development of a universally applicable transponder at S-band is reported. A block diagram of the major subassemblies of the S-band transponder is included. The technology aspects of network timing and synchronization of communication systems are to show the use of the Omega navigation system. The telemetry data compression system used during the Skylab program is evaluated.

Source record↗

NASA NTRS1975

Evaluation of image quality in a Cassegrain-type telescope with an oscillating secondary mirror

A ray-trace analysis is described of aberrations and extreme rays of a Cassegrain-type telescope with a tilted secondary mirror. The work was motivated by the need to understand the factors limiting image quality and to assist in the design of secondary mirrors for three telescopes with oscillating secondary mirrors (OSM) used at Ames Research Center for high altitude infrared astronomy. The telescopes are a 31-cm-diameter Dall-Kirkham (elliptical primary, spherical secondary) flown aboard a Lear jet, a 71-cm balloon-borne Dall-Kirkham flown on the AIROscope gondola, and a 91-cm true Cassegrain (parabolic primary, hyperbolic secondary) flown aboard a C-141 jet transport. The optics for these telescopes were not designed specifically for OSM operation, but all have OSM's and all must be used with various detector configurations; therefore, a facility that evaluates the performance of a telescope for a given configuration is useful. The analytical expressions are summarized and results for the above systems are discussed. Details of the calculation and a discussion of the computer program are given in the appendices.

Erickson, E. F.↗

NASA NTRS1975

Kinetics of the fluorination of zinc

The reaction between zinc metal and fluorine gas can be described by a parabolic rate law. This reaction is both temperature and pressure dependent. Simple kinetics are complicated by the considerable vaporization rate for zinc at temperatures above 300 C (573 K).

Odonnell, P. M.↗

NASA NTRS1975

Dish antenna having switchable beamwidth

A switchable beamwidth antenna includes a concave parabolic main reflecting dish which has a central circular region and a surrounding coaxial annular region. A feed means selectively excites only the central region of the main dish via a truncated subreflector for wide beamwidth or substantially the entire main dish for narrow beamwidth. In one embodiment, the feed means comprises a truncated concave ellipsoid subreflector and separate feed terminations located at two foci of the ellipsoid. One feed termination directly views all of the main dish while the other feed termination, exciting the main dish via the subreflector, excites only the central region because of the subreflector truncation. In the another embodiment, the feed means comprises one feed termination and a convex hyperboloid subreflector via which the feed excites the main dish.

Schmidt, R. F.↗

NASA NTRS1975

Steady-state solutions of a diffusive energy-balance climate model and their stability

A diffusive energy-balance climate model, governed by a nonlinear parabolic partial differential equation, was studied. Three positive steady-state solutions of this equation are found; they correspond to three possible climates of our planet: an interglacial (nearly identical to the present climate), a glacial, and a completely ice-covered earth. Models similar to the main one are considered, and the number of their steady states was determined. All the models have albedo continuously varying with latitude and temperature, and entirely diffusive horizontal heat transfer. The stability under small perturbations of the main model's climates was investigated. A stability criterion is derived, and its application shows that the present climate and the deep freeze are stable, whereas the model's glacial is unstable. The dependence was examined of the number of steady states and of their stability on the average solar radiation.

Ghil, M.↗