Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oriented”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

On the shape and orientation control of an orbiting shallow spherical shell structure

The dynamics of orbiting shallow flexible spherical shell structures under the influence of control actuators was studied. Control laws are developed to provide both attitude and shape control of the structure. The elastic modal frequencies for the fundamental and lower modes are closely grouped due to the effect of the shell curvature. The shell is gravity stabilized by a spring loaded dumbbell type damper attached at its apex. Control laws are developed based on the pole clustering techniques. Savings in fuel consumption can be realized by using the hybrid shell dumbbell system together with point actuators. It is indicated that instability may result by not including the orbital and first order gravity gradient effects in the plant prior to control law design.

Bainum, P. M.↗

PPOD Programmable pilot-oriented display

A general-purpose low cost research microprocessor system for general aviation was developed. This system is intended to be the vehicle for individual research efforts in low cost airborne hardware and software as well as advanced microprocessor based navigation systems and techniques. Two such research projects were undertaken, yielding results in the areas of micro hardware/software design, cost and performance, and pilot/computer interface. Low-cost flight software reliability and a time-difference based Loran approach procedure that eliminates the need for propagation corrections and latitude/longitude transformations are also discussed.

Elias, A. L.↗

The orientation and motion of the predawn current sheet and Jupiter's magnetotail

From the observed times when Pioneer 10 and Voyager 1 observe particle flux maxima and minima and when the magnetic field strength is at minimum a geometric description of the current sheet in Jupiter's magnetosphere is derived. It lags the planetary rotation by an angle delta which varies as a function of radial distance as delta equals 22 deg + 0.80 (r - 16.3). The maximum latitude of the current sheet is roughly 10 deg inside of 60 Jovian radii and decreases beyond. Thus there is a hinge point near 60 Jovian radii. The position of the hinge point moves in response to the external solar wind pressure variation. The variation of delta(r) is discussed theoretically and how it is related to the magnetic field topology and plasma flow is shown. It is concluded that the distant field lines do not corotate with Jupiter and that the Alfven speed at 50 Jovian radii is of the order of 1500 km/s. The topology of the current sheet is affected by centrifugal forces, outward mass transport and solar wind-magnetosphere interaction. It is shown how these effects can be related to different current systems.

Goertz, C. K.↗

Surface flashover arc orientation on Mylar film

A study of the arc discharge patterns and resultant damage patterns on thin Mylar films exposed to a 20 keV electron beam is described. In particular, it is established that there is a broad directional correlation among the directions associated with visible linear arcs, damage tracks, the 'slow' optical direction and the longitudinal marks left on the films surface as a result of chemical etching. Transverse etch marks also appear to be associated with secondary groups of damage track directions. The 'fast' optical direction is associated with the absence of visible arcs or arc damage.

Gossland, M.↗

The intracellular responses of frog eggs to novel orientations to gravity

It is found that multiple short doses of ultraviolet light are as effective as a single large dose in producing neural defects. In addition, 180 deg rotation (inversion) of irradiated eggs reduces the ultraviolet effect. Since yolk platelets may be the gravity sensing mechanism, their size, density, and distribution in normal and inverted eggs are investigated. Large platelets are denser and for the most part are in a distinct zone in the vegetal hemisphere, whereas small platelets are less dense and occur in the animal hemisphere. When inverted, the large platelets flow into the animal hemisphere as a coherent mass and partially displace the small platelets. Inversion is thought to rearrange cytoplasmic components necessary for later neural development into an appropriate configuration.

Radice, G. P.↗

Orientation of planetary O/plus/ fluxes and magnetic field lines in the Venus wake

The presence of 'contaminant' heavy ions of planetary origin in the solar wind has long been the subject of intense theoretical and experimental research. Studies of their abundance, acceleration, and direction of motion are important because of their implications on the composition and dynamics of planetary and cometary plasma wakes. The plasma and magnetic field observations made with the Pioneer Venus Orbiter (PVO) at Venus have provided the opportunity to examine the conditions in which planetary ions are picked up by the solar wind. We show here that in the outer regions of the Venusian far wake the displacement of planetary O(plus) particles, characteristic of the Venus upper ionosphere, does not occur necessarily along the magnetic field lines but approximately in the direction of the shocked solar wind.

Perez-De-tejada, H.↗

Determination of intercontinental baselines and Earth orientation using VLBI

A series of experiments was conducted during the last decade to explore the capability of very long baseline interferometry (VLBI) to measure the crustal and rotational motions of the Earth with accuracies at the centimeter level. The observing stations are those of NASA's Deep Space Network in California, Spain and Australia. A multiparameter fit to the observed values of delay and delay rate yields radio source positions, polar motion, universal time, the precession constant, baseline vectors, and solid Earth tides. Source positions are obtained with formal errors of the order of 0''.01. UT1-UTC and polar motion are determined at 49 epochs, with formal error estimates for the more recent data of 0.5 msec for UT1-UTC and 2 to 6 mas for polar motion. Intercontinental baseline lengths are determined with formal errors of 5 to 10 cm. The Love numbers and Earth tide phase lag agree with the commonly accepted values.

Sovers, O. J.↗

The Earth Resources Laboratory Applications Software (ELAS) in university research and education: An operator oriented geobased information system

Created for analyzing and processing digital data such as that collected by multispectral scanners or digitized from maps, ELAS is designed for ease of user operation and includes its own FORTRAN operating monitor and an expandable set of application modules which are FORTRAN overlays. On those machines that do not support FORTRAN overlaying, the modules exist as subprograms. The subsystem can be implemented on most 16-bit or 32-bit machines and is capable of, but not limited to, operating on low-cost minicomputer systems. The recommended hardware configuration for ELAS and a representative listing of some operating and application modules are presented.

Coker, B. L.↗

Radio Interferometric Determination of Source Positions, Intercontinental Baselines, and Earth Orientation with Deep Space Network Antennas: 1971 to 1980

Approximately 2400 observations of extragalactic radio sources were made between August 1971 and February 1980 during 48 separate sessions. These consisted of 259 delay rate observations at 2.3 GHz (S-band), 796 delay and delay rate observations at either S-band of 8.3 GHz (X-band) and 1325 delay and delay rate observations recorded simultaneously at both S- and X-band. A single multiparameter fit has been applied to the observed values of delay and delay rate to extract astrometric and geophysical parameters from this decade-long sequence. The fit produced estimates of 784 parameters, including station locations, radio source positions, polar motion, Universal Time, the precession constant, and solid earth tides. The a priori model included gravitational bending, the 1980 IAU nutation series, the 1976 IAU expressions for Greenwich mean sidereal time and precession, BIH estimates of Universal Time and polar motion, and monthly mean values for zenith troposphere delay. The rms residuals were 0.52 nsec for delay and 0.30 psec/sec for delay rate. Intercontinental baseline lengths were determined with formal uncertainties of 5 to 10 cm. Universal Time and polar motion were measured at 49 epochs, with formal uncertainties (for the more recent data) of 0.5 msec for UT1 and 6 and 2 mas, respectively, for the X and Y components of polar motion.

Thomas, J. B.↗

DBPQL: A view-oriented query language for the Intel Data Base Processor

An interactive query language (BDPQL) for the Intel Data Base Processor (DBP) is defined. DBPQL includes a parser generator package which permits the analyst to easily create and manipulate the query statement syntax and semantics. The prototype language, DBPQL, includes trace and performance commands to aid the analyst when implementing new commands and analyzing the execution characteristics of the DBP. The DBPQL grammar file and associated key procedures are included as an appendix to this report.

Fishwick, P. A.↗

On the shape and orientation control of orbiting shallow spherical shell structure

The dynamics of orbiting shallow flexible spherical shell structures under the influence of control actuators was studied. Control laws are developed to provide both attitude and shape control of the structure. The elastic modal frequencies for the fundamental and lower modes are closely grouped due to the effect of the shell curvature. The shell is gravity stabilized by a spring loaded dumbell type damper attached at its apex. Control laws are developed based on the pole clustering techniques. Savings in fuel consumption can be realized by using the hybrid shell dumbbell system together with point actuators. It is indicated that instability may result by not including the orbital and first order gravity gradient effects in the plant prior to control law design. Previously announced in STAR as N82-17243

Bainum, P. M.↗

Spatial orientation - Visual-vestibular-somatic interaction

The compensation signals from somatosensory and vestibular receptors, which act to compensate for disturbances produced by the displacement of our eyes relative to other parts of our bodies and for visual disturbances such as tilted frames or moving visual fields, are investigated. Disturbances were evoked by tilting the head and by rotating a large visual display, while compensation signals related to gravity were altered by placing the subjects horizontally on a board or seating them vertically. The first experiment studied the effects of visual disturbance on the ability of supine observers to set a line to the longitudinal body axis while the head was tilted toward one shoulder or while the head was straight. Results showed that the effects of the visual disturbance were greater when the head was tilted than when it was straight, which indicates that the effects of visual disturbance were greater for a task that required compensation. The second experiment compared the performance of supine and erect observers. No differences were found between the performance of observers on a task requiring the use of compensation signals under these two conditions, which suggests that the enrichment of compensatory signals did not reduce the effects of visual disturbancs.

Parker, D. E.↗

Light scattering by randomly oriented cubes and parallelepipeds

In this paper, the geometric ray tracing theory for the scattering of light by hexagonal cylinders to cubes and parallelepipeds has been modified. Effects of the real and imaginary parts of the refractive index and aspect ratio of the particle on the scattering phase function and the degree of linear polarization are investigated. Causes of the physical features in the scattering polarization patterns are identified in terms of the scattering contribution due to geometric reflections and refractions. The single-scattering phase function and polarization data presented in this paper should be of some use for the interpretation of observed scattering and polarization data from planetary atmospheres and for the physical understanding of the transfer of radiation in an atmosphere containing nonspherical particles.

Liou, K. N.↗

A Visually Oriented Text Editor

HERMAN employs Evans & Sutherland Picture System 2 to provide screenoriented editing capability for DEC PDP-11 series computer. Text altered by visual indication of characters changed. Group of HERMAN commands provides for higher level operations. HERMAN provides special features for editing FORTRAN source programs.

Gomez, J. E.↗

Investigation of effects of microphone position and orientation on near-ground noise measurements

Three ground level microphone mounting techniques (flush mounting, inverting the microphone over a plate, and lying the microphone on a plate) were compared over a frequency range from 315 Hz to 20 kHz and over a wide range of incidence angles in the Langley Jet-Noise Laboratory anechoic room. The flush mounted microphone, when compared with a free field microphone, exhibited approximate pressure doubling up to a frequency of 10 kHz. At frequencies less than 4 kHz, the inverted and lying microphones were in good agreement with the flush mounted microphone, and their 1/3-octave-band response spectra were fairly insensitive to the position of the microphone. At higher frequencies, the geometry of the microphone and its mounting became important. The inverted microphone 0.5 times the diameter above the plate gave the flattest response compared with the flush mounted microphone. Nondimensional analysis of the inverted and lying results showed that for Kappa H cos theta 0.7 the response of the microphones approached that of the flush mounted microphone.

Willshire, W. L., Jr.↗

Microstructure and orientation effects on properties of discontinuous silicon carbide/aluminum composites

Composite panels containing up to 40 vol % discontinuous silicon carbide SiC whisker, nodule, or particulate reinforcement in several aluminum matrices are commercially fabricated and the mechanical properties and microstructual characteristics are evaluated. The yield and tensile strengths and the ductility are controlled primarily by the matrix alloy, the temper condition, and the reinforcement content. Particulate and nodule reinforcements are as effective as whisker reinforcement. Increased ductility is attributed to purer, more uniform starting materials and to more mechanical working during fabrication. Comparing mechanical properties with those of other aluminum alloys shows that these low cost, lightweight composites demonstrate very good potential for application to aerospace structures.

Mcdanels, D. L.↗