SEARCH · Engineering Papers

Results for “magnitude”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Kohn–Sham accuracy from orbital-free density functional theory via Δ-machine learning

Here, we present a Δ-machine learning model for obtaining Kohn–Sham accuracy from orbital-free density functional theory (DFT) calculations. In particular, we employ a machine-learned force field (MLFF) scheme based on the kernel method to capture the difference between Kohn–Sham and orbital-free DFT energies/forces. We implement this model in the context of on-the-fly molecular dynamics simulations and study its accuracy, performance, and sensitivity to parameters for representative systems. We find that the formalism not only improves the accuracy of Thomas–Fermi–von Weizsäcker orbital-free energies and forces by more than two orders of magnitude but is also more accurate than MLFFs based solely on Kohn–Sham DFT while being more efficient and less sensitive to model parameters. We apply the framework to study the structure of molten Al 0.88 Si 0.12 , the results suggesting no aggregation of Si atoms, in agreement with a previous Kohn–Sham study performed at an order of magnitude smaller length and time scales.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Evidence for ionization damage in mid-wave infrared nBn detectors

The effects of 63 MeV proton and 60Co gamma irradiation on the operation of 4.3 μm cutoff nBn photodetectors are demonstrated separately, and both are shown to yield a total ionizing dose (TID) effect. The effect is shown here in an InAsSbBi nBn detector and has been observed in other bulk alloy nBn detectors, and is unusual as it is notably absent in superlattice nBn detectors. The non-antireflection coated detectors exhibit a pre-radiation quantum efficiency of 17% at 3.3 μm wavelength and a dark current density of 50 μA/cm2, or roughly 300× the Rule 07 expectation, at their ideal operating voltage of −0.4 V bias at 150 K. Step-wise proton irradiation and in situ measurement indicate that the dark current increases to about 400× Rule 07 at the highest proton dose level of 150 krad(Si) (9.10 × 1011 p+/cm2), while the quantum efficiency is degraded at a relatively faster rate than the majority of analogous detectors characterized by our lab. Both the photocurrent and dark current are also shown to exhibit a turn-on voltage magnitude reduction of 100 mV following either gamma or proton irradiation, a trend which is attributable to negative trapped charge at the barrier interface (TID effect). This theory is further supported by an observed capacitance density magnitude reduction with dose and affirmed with Silvaco TCAD simulations. Following both proton exposure and subsequent anneal and gamma exposure and subsequent anneal; dark current, photocurrent, and CV all approach their pre-radiation baseline values.

Physics↗

DOE OSTI2025

Effect of electron–electron interactions on the emission characteristics of ultracold, nanoscale photoemission-based electron sources

For nearly 60 years, cold field emitters have been the source of choice for electron microscopy due to their high brightness and relatively low energy spread. In this paper, we have examined an alternative: nanoscale electron sources based on near-threshold photoemission. While these sources have not yet been realized, they hold the potential to produce significantly brighter beams than cold field emitters. We model electron–electron Coulomb interactions in beams emitted from such sources to calculate the impact of these interactions on the brightness and the energy spread. Our results show that these sources can theoretically deliver more than an order of magnitude brighter electron beams compared to cold field emitters along with more than an order of magnitude smaller energy spread, before being limited by the Coulomb interactions. Electron sources with such high brightness and low energy spread would be transformational for electron microscopy, enabling electron energy loss-based vibrational spectroscopy at the sub-nanometer scale.

Gevorkyan, G S↗

DOE OSTI2025

Enhancement to the conductivity of surface transfer-doped (111) diamond through thermochemical surface etching

The use of a transition metal catalyzed thermochemical etching method for improving the carrier transport properties of the near-surface two-dimensional (2D) hole gas in surface transfer-doped hydrogen-terminated (111) diamond is demonstrated. Using Ni 0.8 Cr 0.2 films deposited and annealed to a temperature of 900 °C, with up to three etch cycles, preferential (111) surface etching produces large terraces exceeding 10 μm in size with a surface microroughness, σ 2 RMS λ, that is two orders of magnitude lower than for the pre-etched (111) surface. Magnetotransport measurements on hydrogen-terminated Hall bars engineered on the pre- and post-etched surfaces and rendered conductive by the adsorbed water layer formed on exposure to ambient conditions demonstrate that this etching causes an improvement in the hole mobility by an order of magnitude, resulting in a measured sheet resistivity of 1.04 kΩ/sq at a temperature of 4.2 K without gating.

42 ENGINEERING↗

DOE OSTI2025

Off-state magnetoresistance in long-channel germanium Schottky-barrier MOSFETs

An increasing magnetic field perpendicular to an undoped semiconductor surface at low temperature is known to strengthen the binding of localized electrons to stationary ions, as the wavefunction's tails evolve from exponential to Gaussian. It is also known that application of a high bias voltage to a depleted semiconductor can liberate bound charge and induce a large drop in electrical resistance. We connect these established results to experimental electrical transport measurements on off-state germanium Schottky-barrier metal–oxide–semiconductor field-effect transistor (MOSFETs) with an aluminum oxide insulating dielectric and platinum germanide contacts. We make measurements at the three distinct orientations of the magnetic field with respect to the substrate and the current. At 6 K, we observe sharp attenuation of current by more than 2 orders of magnitude, within 60 mT, at a crossover magnetic field perpendicular to the substrate. A 1 T magnetic field attenuates the current by more than 4 orders of magnitude. The strength of the attenuation and the value of the crossover field are controlled by both the gate–source and drain–source voltages. The attenuation is much weaker when the magnetic field is parallel to the current. Finally, we orient the magnetic field parallel to the substrate, but perpendicular to the current, allowing us to distinguish charge hopping at the oxide interface from charge hopping in the bulk. In conclusion, this large off-state magnetoresistance can be exploited for cryogenic magnetic- and photo-detection, and for high-bias, low-leakage MOSFETs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2025

Direct measurement of thermal Knudsen forces in rarefied gas environments

At micro- and nanoscales, momentum transfer between surfaces is influenced by various physical mechanisms, including quantum fluctuations, electromagnetic interactions, electric charges, and the dynamics of (rarefied) gases. Under non-isothermal conditions, rarefied gases give rise to thermal Knudsen forces whose magnitudes strongly depend on the gas species and surface characteristics. Knudsen forces are particularly relevant in nanotechnology, optical manipulation, and aerospace systems, where gas rarefaction occurs due to highly confined geometries, sub-micrometer length scales, and reduced particle densities. Despite their significance, predictive modeling of Knudsen forces is limited by a lack of comprehensive experimental data across diverse materials and surface morphologies. Here, in this work, we present a highly sensitive and adaptable measurement platform capable of directly quantifying Knudsen forces using a suspended, interchangeable micro-cantilever within controlled rarefied helium and nitrogen environments. The system integrates optical fiber interferometry to precisely capture out-of-plane displacements at sub-micrometer resolution, driven by Knudsen forces. From the empirical data, we derive a robust correlation linking the magnitudes of Knudsen forces to energy accommodation coefficients, offering deeper insights into the underlying gas–surface interaction mechanisms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2026

Analytical model for balling defects in laser melting using rivulet theory and solidification

In laser welding and additive manufacturing communities, the balling (humping) defect is primarily attributed to the Plateau–Rayleigh fluid instability (PRI) with a few authors suggesting fluid jetting and volume conservation as alternative mechanisms. As analytical descriptions of these mechanisms are unavailable, combining them into a single formalism is unfeasible. We present a new model of PRI with higher accuracy, accounting for competition with solidification, to compare the expected behavior with known experimental trends when fluid jetting is neglected. We adapt a rivulet instability model from fluid physics to account for the stabilizing effects of the substrate, which the traditional cylindrical-jet geometry does not account for and estimate the instability growth rate. Our model yields a continuous transition from non-balling to balling hitherto lacking in current literature and predicts instability growth at higher wavelengths with strong sensitivity to the solidification front curvature. While the fluid surface is most unstable for shallow melt pools, the absolute magnitude of balling relevant to printing defects scales with melt pool depth and has a maximum for a given melt pool geometry. Synchrotron-based x-ray radiography of thin samples indicates that PRI growth rates and solidification can be comparable in magnitude and thus compete, as we find in this work. We predict that deviations between model predictions and our experimental results demonstrate the importance of fluid flows and heat transport in the balling process. Our experiments further demonstrate at least one mechanism by which the melt pool length and the balling wavelength are not equivalent, as commonly claimed.

Taylor, Z. [Stanford Univ., CA (United States); SL↗

DOE OSTI2025

Nm-scale electrical resistance imaging on CdTe by scanning spreading resistance microscopy

Local resistance imaging can provide information on nm-scale carrier distribution in semiconductor devices. Scanning spreading resistance microscopy (SSRM), an atomic force microscopy-based nm-scale resistance mapping technique, has been developed for carrier delineation in Si microdevices. We report on the development and validation of SSRM on CdTe materials, by testing on molecular beam epitaxy (MBE) grown CdTe films. The probe/CdTe contact resistance was suppressed sufficiently below sample's spreading resistance by pressing the probe into the sample with ∼mN contact force and applying a large sample/probe forward bias voltage (V s ), which was understood by analyzing current-voltage (I-V) involving a serially connected insulating top layer with underlying spreading resistance. The carrier concentration as deduced from the resistance measurement, using a single mobility value, is consistent with Hall measurement with a standard deviation of 14% based on a set of MBE films with carrier concentrations in the range of 10 15 –10 16 /cm 3 . The doping polarity was readily identified by flipping V s polarity, where the resistance with reverse V s is orders of magnitude larger than forward V s . While focusing on the SSRM technique validation, we also show an example on an As-doped Cd(Se,Te) polycrystalline thin film of a high-performance CdTe solar cell, which illustrates the local resistance nonuniformity with up to two orders of magnitude differences, indicating if local mobility is roughly constant, local carrier concentration can have significant nonuniformity.

14 SOLAR ENERGY↗

DOE OSTI2025

Embedded random phase approximation for magnetic systems: H 2 dissociative adsorption on Fe(110)

The random phase approximation (RPA), a method for treating electron correlation, has been shown to be superior to standard density functional theory (DFT) approximations in numerous cases. However, the RPA’s computational cost is substantially higher than that of DFT, particularly restricting its application to extended surfaces. The recently introduced embedded RPA (emb-RPA) approach [Wei et al., J. Chem. Phys. 159(19), 194108 (2023)] reduces this computational cost by approximately two orders of magnitude. While previous applications of emb-RPA focused on non-spin-polarized systems, here we extend the approach to ferromagnetic ones. Unlike other embedded correlated wavefunction methods, such as embedded complete active space self-consistent field theory, emb-RPA is advantageous for spin-polarized systems because the RPA is compatible with unrestricted DFT solutions, which are eigenfunctions of the spin angular momentum operator S z but not the total spin-squared operator S 2 . By applying emb-RPA with specific magnetization constraints, we achieved a speedup of two to three orders of magnitude (one order when accounting for the one-time embedding potential optimization cost) with only small errors (∼50 meV) compared to full periodic RPA. Moreover, emb-RPA significantly reduces the over-binding errors of DFT approximations. In conclusion, we anticipate that the acceleration enabled by the spin-polarized emb-RPA approach will broaden the applicability of RPA to magnetic materials.

Density functional theory↗

DOE OSTI2025

Correcting impedance measurements for background parasitics to characterize circuit components in cryogenic environments

Predictable circuit response is a critical prerequisite for accurate electronic measurements. Here, we describe a powerful yet straightforward experimental method and analysis model that utilizes an affordable LCR meter in conjunction with an in situ parasitic-impedance background-correction procedure to measure the temperature-dependent impedance (magnitude and phase) of up to ten individual passive circuit elements in a single cryostat run. We show how the model unambiguously identified a ∼20× drop in capacitance for 22 μF 5XR multilayer ceramic capacitors cooled from 300 K to 360 mK in an environment with a parasitic capacitance of ∼300 pF. The same experimental procedure, based on a simple two-wire measurement, was also used to measure 10 and 22 pF thin-film capacitors and 100 MΩ thick-film resistors. The results showed that the resistor values increased by up to an order of magnitude when the devices were cooled from 300 K to 360 mK. Most importantly, we showed that the simple data-acquisition method, coupled with our analysis model, enabled the measurement of component parasitics, and effectively extended the accuracy of a commercial LCR meter beyond its manufacturer-guaranteed values for a wide range of measurement frequencies. We also showed that, in the current configuration, our simple approach is limited to a capacitance accuracy of ∼10 pF.

Carpenter, R. J. [Santa Clara Univ., Santa Clara, ↗

DOE OSTI2026

Bremsstrahlung constraints on proton-boron 11 inertial fusion

Proton-boron 11 (pB11) fusion is relatively safe and clean, but difficult to use for net power production, since bremsstrahlung radiation tends to radiate away power more quickly than it can be generated by fusion power, particularly once poisoning by alpha particles is taken into account. While in magnetic confinement fusion, this problem can be addressed by deconfining the alphas, in inertial confinement fusion (ICF), the alphas that heat the plasma linger for the duration of the reaction. Thus, it becomes essential to trap the bremsstrahlung radiation in the hotspot. Through burn simulations incorporating bremsstrahlung emission and reabsorption, we infer the necessary conditions to capture enough radiation to produce scientific breakeven in a pB11 ICF plasma. We find that breakeven requires a stagnation areal density roughly two orders of magnitude higher than the current state-of-the-art, at pressures three orders of magnitude higher.

Alpha particles↗

DOE OSTI2026

SHarmonic: A fast and accurate implementation of spherical harmonics for electronic-structure calculations

The authors present SHarmonic, a new implementation of the spherical harmonics targeted for electronic-structure calculations. Their approach is to use explicit formulas for the harmonics written in terms of normalized Cartesian coordinates. This approach results in a code that is as precise as other implementations while being at least one order of magnitude more computationally efficient. The library can run on graphics processing units as well, achieving an additional order of magnitude in execution speed. This new implementation is simple to use and is provided under an open-source license; it can be readily used by other codes to avoid the error-prone and cumbersome implementation of the spherical harmonics.

Mathematics and Computing↗

DOE OSTI2020

Possibility of reducing nonlinear distortions of a frequency response of a gas ring laser with a periodic alternating frequency bias

We report a theoretical study of the dependence of the beat frequency of counterpropagating waves on the rotation velocity in a gas ring laser with a periodic alternating frequency bias. Rectangular biases of two types are considered: with constant amplitude and with periodic amplitude modulation. We have found dynamic zones for locking-in the counterpropagating wave frequencies and determined deviations of the frequency response from the ideal one that arise when measuring frequency nonreciprocities, close in magnitude to the amplitude of an alternating frequency bias. It is shown that in the case of a rectangular bias with periodic amplitude modulation, nonlinear distortions of the frequency response can be reduced by an order of magnitude. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2020

Electronic nematicity in Sr 2 RuO 4

We have measured the angle-resolved transverse resistivity (ARTR), a sensitive indicator of electronic anisotropy, in high-quality thin films of the unconventional superconductor Sr 2 RuO 4 grown on various substrates. The ARTR signal, heralding the electronic nematicity or a large nematic susceptibility, is present and substantial already at room temperature and grows by an order of magnitude upon cooling down to 4 K. In Sr 2 RuO 4 films deposited on tetragonal substrates the highest-conductivity direction does not coincide with any crystallographic axis. In films deposited on orthorhombic substrates it tends to align with the shorter axis; however, the magnitude of the anisotropy stays the same despite the large lattice distortion. These are strong indications of actual or incipient electronic nematicity in Sr 2 RuO 4 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Large ecosystem-scale effects of restoration fail to mitigate impacts of land-use legacies in longleaf pine savannas

Ecological restoration is a global priority, with potential to reverse biodiversity declines and promote ecosystem functioning. Yet, successful restoration is challenged by lingering legacies of past land-use activities, which are pervasive on lands available for restoration. Although legacies can persist for centuries following cessation of human land uses such as agriculture, we currently lack understanding of how land-use legacies affect entire ecosystems, how they influence restoration outcomes, or whether restoration can mitigate legacy effects. Using a large-scale experiment, we evaluated how restoration by tree thinning and land-use legacies from prior cultivation and subsequent conversion to pine plantations affect fire-suppressed longleaf pine savannas. In this work, we evaluated 45 ecological properties across four categories: 1) abiotic attributes, 2) organism abundances, 3) species diversity, and 4) species interactions. The effects of restoration and land-use legacies were pervasive, shaping all categories of properties, with restoration effects roughly twice the magnitude of legacy effects. Restoration effects were of comparable magnitude in savannas with and without a history of intensive human land use; however, restoration did not mitigate numerous legacy effects present prior to restoration. As a result, savannas with a history of intensive human land use supported altered properties, especially related to soils, even after restoration. The signature of past human land-use activities can be remarkably persistent in the face of intensive restoration, influencing the outcome of restoration across diverse ecological properties. Understanding and mitigating land-use legacies will maximize the potential to restore degraded ecosystems.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2022

CO 2 fertilization of terrestrial photosynthesis inferred from site to global scales

Significance The magnitude of the CO 2 fertilization effect on terrestrial photosynthesis is uncertain because it is not directly observed and is subject to confounding effects of climatic variability. We apply three well-established eco-evolutionary optimality theories of gas exchange and photosynthesis, constraining the main processes of CO 2 fertilization using measurable variables. Using this framework, we provide robust observationally inferred evidence that a strong CO 2 fertilization effect is detectable in globally distributed eddy covariance networks. Applying our method to upscale photosynthesis globally, we find that the magnitude of the CO 2 fertilization effect is comparable to its in situ counterpart but highlight the potential for substantial underestimation of this effect in tropical forests for many reflectance-based satellite photosynthesis products.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2026

Cryogenic electron tomography by the numbers: Charting underexplored lineages in structural cell biology

Imaging cells and their interactions across the whole biosphere with molecular-scale resolution is key for understanding structure–function relations. Cryogenic electron tomography (cryo-ET) is a powerful method for obtaining this critical information. However, cryo-ET studies are challenging and often limited to a small number of cell types per study. Here, we collate cryo-ET data from hundreds of cells and tissues across the biosphere to i) identify emerging methodological trends, ii) pinpoint strategies to reduce imaging time and costs, iii) quantitatively compare methods for cell freezing and sectioning, and iv) census cryo-ET species coverage across all domains of life. Comparing the fraction of cellular material within a single lamella across all domains of life reveals an order of magnitude difference between eukaryotes (1%) compared to bacteria (9%) and archaea (14%). We calculate the fraction of cellular material which can be imaged using distinct sectioning methods on multicellular communities and tissues—identifying serial lift-out as a powerful approach for obtaining more complete cellular depictions. Finally, we show that the biodiversity of current cryo-ET studies is 2 to 3 orders of magnitude lower than in sequence libraries and 4 to 5 lower than the total predicted on Earth. Our analyses reveal major evolutionary lineages which remain critically understudied and highlight where future cryo-ET research would be most impactful.

HPF↗

DOE OSTI2020

Airborne Release Fractions from Surrogate Nuclear Waste Fires Containing Lanthanide Nitrates and Depleted Uranium Nitrate in 30% Tributyl Phosphate in Kerosene

Airborne contaminants from fires containing nuclear waste represent significant health hazards and shape the design and operation of nuclear facilities. Much of the data used to formulate DOE-HDBK-3010-94, “Airborne Release Fractions/Rates and Respirable Fractions for Nonreactor Nuclear Facilities,” from the U.S. Department of Energy, were taken over 40 years ago. The objectives of this study were to reproduce experiments from Pacific Northwest Laboratories conducted in June 1973 employing current aerosol measurement methods and instrumentation, develop an enhanced understanding of particulate formation and transport from fires containing nuclear waste, and provide modeling and experimental capabilities for updating current standards and practices in nuclear facilities. A special chamber was designed to conduct small fires containing 25 mL of flammable waste containing lutetium nitrate, ytterbium nitrate, or depleted uranium nitrate. Carbon soot aerosols showed aggregates of primary particles ranging from 20 to 60 nm in diameter. In scanning electron microscopy, ~200-nm spheroidal particles were also observed dispersed among the fractal aggregates. The 200-nm spherical particles were composed of metal phosphates. Airborne release fractions (ARFs) were characterized by leaching filter deposits and quantifying metal concentrations with mass spectrometry. The average mass-based ARF for 238 U experiments was 1.0 × 10 -3 with a standard deviation of 7.5 × 10 -4 . For the original experiments, DOE-HDBK-3010-94 states, “Uranium ARFs range from 2 × 10 -4 to 3 × 10 -3 , an uncertainty of approximately an order of magnitude.” Therefore, current measurements were consistent with DOE-HDBK-3010-94 values. ARF values for lutetium and ytterbium were approximately one to two orders of magnitude lower than 238 U. Furthermore, metal nitrate solubility may have varied with elemental composition and temperature, thereby affecting ARF values for uranium surrogates (Yb and Lu). In addition to ARF data, solution boiling temperatures and evaporation rates can also be deduced from experimental data.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗