Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “in situ testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Non-Intrusive Characterization of the Wear of the HERMeS Thruster Using Optical Emission Spectroscopy

The Hall Effect Rocket with Magnetic Shielding (HERMeS) is a 12.5 kW Hall thruster electric propulsion string that has been in development by NASA Glenn Research Center(GRC) and NASA JPL since 2012. Due to the magnetically shielded design, service life-limiting erosion of the boron nitride discharge has been virtually eliminated. The inner front pole cover (IFPC) has now been identified as the component defining erosion-based service life. Optical emission spectroscopy (OES) is used as an in-situ diagnostic to measure relative erosion trends during operation of the HERMeS thruster during a series of short duration wear tests. Erosion trends obtained from the OES data will be compared to traditional erosion data measured with a non-contact profilometer.

Gray, Timothy G.↗
NASA NTRS2022

The Dynamic Coupling of Streamers and Pseudostreamers to the Heliosphere

The slow solar wind is generally believed to result from the interaction of open and closed coronal magnetic flux at streamers and pseudostreamers. We use three-dimensional magnetohydrodynamic simulations to determine the detailed structure and dynamics of open-closed interactions that are driven by photospheric convective flows. The photospheric magnetic field model includes a global dipole giving rise to a streamer together with a large parasitic polarity region giving rise to a pseudostreamer that separates a satellite coronal hole from the main polar hole. Our numerical domain extends out to 30Rꙩ and includes an isothermal solar wind, so that the coupling between the corona and heliosphere can be calculated rigorously. This system is driven by imposing a large set of quasi-random surface flows that capture the driving of coronal flux in the vicinity of streamer and pseudostreamer boundaries by the supergranular motions. We describe the resulting structures and dynamics. Interchange reconnection dominates the evolution at both streamer and pseudostreamer boundaries, but the details of the resulting structures are clearly different from one another. Additionally, we calculate in situ signatures of the reconnection and determine the dynamic mapping from the inner heliosphere back to the Sun for a test spacecraft orbit. We discuss the implications of our results for interpreting observations from inner heliospheric missions, such as Parker Solar Probe and Solar Orbiter, and for space weather modeling of the slow solar wind.

V. Aslanyan↗
NASA NTRSDate not supplied

Modeling 238U/204Pb (μ) and Initial Pb of Lunar Meteorite Northwest Africa 12593

Apatite Ca 5 (PO 4 ) 3 (F, Cl, OH) serves as a valuable analytical resource. It is the only nominally hydrous phase on the moon and possesses the capacity to concentrate elements like U, Th, Pb, and rare earth elements (REE). This characteristic facilitates its use in U-Pb and Pb-Pb geochronology, allowing for the determination of the initial isotopic Pb and the -238 U/ -204 Pb ratio (μ) of the parent melt. In situ analysis of apatite grains can provide a detailed record of geochemical changes, revealing the broader petrogenetic and volatile history of the source material. This mineral is particularly informative in understanding the developmental history of its source. In situ analyses are crucial for lunar samples, predominantly composed of breccias, where correlating distinct grains with whole rock analyses poses challenges. This study utilizes in situ apatite isotopic analysis of apatite grains in lunar meteorite Northwest Africa 12593 and model the initial Pb isotopic composition and -238 U/ -204 Pb (μ) of the source. We present in situ Secondary Ionization Mass Spectrometry (SIMS) Pb-Pb analyses of 12 apatite grains in Northwest Africa (NWA) 12593 to test two hypotheses: 1) NWA 12593 clasts and matrix are closely related and from the same source, and 2) the matrix material previously documented as having a highland affinity has a lower modeled μ then KREEP.

K M Lehman Franco↗
NASA NTRSDate not supplied

Towards Quantifying and Correlating RTV Intumescence to Entry-Relevant Conditions

Room Temperature Vulcanizing silicone (RTV) is a high-temperature adhesive used as a gap-filler between Thermal Protection System (TPS) tiles for heatshields on numerous missions. It is also adopted to bond instrumentation plugs of temperature and pressure sensors into heatshield’s tiles. While RTV has been traditionally assumed to be a non-porous and non-ablating material, numerous experiments have shown that RTV pyrolyzes and becomes highly porous as it is heated. Experimental data has also shown heating rate-dependent swelling (or intumescence) and shrinking of RTV, these volume changes may cause roughness-induced boundary layer transition. Outgassing and surface oxide formation of RTV upon decomposition also occur, which can be sources of contamination of heat shield sensors. This combination of detrimental effects motivates a critical need to develop a high-fidelity model for RTV ablation. As a first critical step in RTV modeling, a comprehensive material properties database for RTV was collected that account for the lack of data in properties such as pyrolysis char yield, shape change, virgin and char porosity. The next step is to quantify the volume change of RTV as a function of temperature. While this was done in previous campaigns, limited data was collected which showed a possible heating rate dependent intumescent behavior. To further understand the intumescence phenomenon of RTV, numerous dedicated experiments were performed at Beamline 8.3.2 of the Advanced Light Source, where RTV samples were heated while X-ray scans were taken in situ. Micro-Computed Tomography scans were taken in situ for low heating rates (≤ 60 °C/min), whereas continuous radiography scans were taken for higher heating rates (≤ 1500 ºC/min). Unconstrained samples and samples constrained in different holders (quartz, graphite, FiberForm and PICA) were tested to determine the change in intumescence due to confinement. Using deep learning techniques, the tomographies and radiographies are segmented to obtain volume change, porosity, pore size distributions and connectivity. From the results obtained, modifications to the previous RTV intumescence model are proposed, along with preliminary comparisons to testing RTV at high-enthalpy facilities.

RTV↗
NASA NTRS2018

Volatiles Loss from Water Bearing Regolith Simulant at Lunar Environments

In-Situ Resource Utilization (ISRU) enables future planetary exploration by using local resources to acquire mission consumables. Water-bearing regolith has been identified on the moon in the permanently shadowed craters. Missions designed to retrieve these resources will require testing in relevant environments. The Planetary Surface Simulation Facility (otherwise known as VF-13) at the NASA Glenn Research Center can create these relevant environments for ground based testing. This dirty thermal vacuum chamber is 3.6 m tall, 1.5 m in diameter, and can achieve pressures on the order of 10-6 Torr. The internal wall of the chamber and the soil bin are separately temperature controlled using liquid nitrogen. For the past four years, the chamber has been used by NASA's Resource Prospector to characterize volatiles loss during regolith sampling operations. Observations from 43 samples suggest agitating the sample during delivery has a significant impact on the volatiles loss. Calculated mass loss rates are consistent for similar size samples. However, the variations in moisture loss do not clearly correlate with measured conditions. Continued testing will examine the impacts of the mechanical sample delivery process.

In Situ Resource Utilization↗
DOE OSTI2024

ThermoPore: Predicting part porosity based on thermal images using deep learning

Part qualification is often a critical and labor-intensive process in additive manufacturing, particularly in the detection of defects such as porosity, which stands to benefit significantly from advancements in machine learning. We present a deep learning approach for quantifying and localizing ex-situ porosity within Laser Powder Bed Fusion fabricated samples utilizing in-situ thermal image monitoring data. Our goal is to build the real time porosity map of parts based on thermal images acquired during the build. The quantification task builds upon the established Convolutional Neural Network model architecture to predict pore count and the localization task leverages the spatial and temporal attention mechanisms of the novel Video Vision Transformer model to indicate areas of expected porosity. Our model for porosity quantification achieved a R 2 score of 0.57 and our model for porosity localization produced an average Intersection over Union (IoU) score of 0.32 and a maximum of 1.0. This work is setting the foundations of part porosity “Digital Twins” based on additive manufacturing monitoring data and can be applied downstream to reduce time-intensive post-inspection and testing activities during part qualification and certification. In addition, we seek to accelerate the acquisition of crucial insights normally only available through ex-situ part evaluation by means of machine learning analysis of in-situ process monitoring data.

Deep learning↗
DOE OSTI2024

High-Temperature Wireless Sensor Platform Powered by Energy Scavenging

This paper reports on the development of key components required for a self-powered oscillator unit designed to wirelessly transmit its signal under full insertion in high-temperature (HT) harsh-environments (HE), such as those present in power plants and industrial settings (metallurgic, oil extraction, molding, and aerospace). The oscillator employed a silicon carbide (SiC) power transistor and HT passive components on a screen-printed alumina circuit board capable of operation beyond 300 °C. The HT oscillator circuit was powered solely by in-situ energy scavenging thermoelectric generator (TEG) modules using passive cooling, eliminating the need for an external power supply or active cooling. In addition, a silicon-based external booster circuit was used to achieve the required TEG voltage regulation to test the TEG-powered HT oscillator circuit. The TEG-powered oscillator circuit was tested inside a non-metallic furnace from room temperature to over 300 °C for transmission of a wireless signal, which was detected outside the furnace at 11 ft (3.4 m). Such a wireless transmitting system powered only by in-situ TEGs, with no requirement for external power or active cooling, is very attractive for flexible, mobile stand-alone control and sensor units targeted for operation in HT HE conditions found in power plants and industrial settings.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2021

Multi-Messenger In-situ Tolerance Optimization of Mixed Perovskite Photovoltaics. Final Report

The main objectives for this project were to formulate, validate and disseminate a new procedure based on Environmental X-ray Photoelectron Spectroscopy (EXPS) for the accelerated degradation testing of metal hybrid perovskite (MHP) PV materials. With this capability, we can aid US efforts to improve MHP tolerance for illumination in damp heat conditions. This capability will benefit the public by supporting new industry efforts to create stable MHP formulations.

14 SOLAR ENERGY↗
DOE OSTI2023

Irradiation of ultrasonic sensors and adhesive couplants for application in light water reactor primary loop piping and components

The Electric Power Research Institute (EPRI) Nuclear Sector and US Department of Energy Light Water Reactor Sustainability Program are committed to engaging in research and development endeavors to address materials aging issues specific to long term operation of light water power reactors. To this effect, EPRI launched an industry initiative to develop nondestructive evaluation systems for online monitoring of existing cracks in light water reactor primary coolant loop piping and components. One of the goals of this initiative is to develop a sensor system (or systems) that can determine nondestructively if cracks are growing or arrested and, in the case of the former, to characterize their growth rates. A missing component of this initiative is an experimental assessment of how sensors and adhesive couplants will perform in service when exposed to chronic energetic neutron radiation, particularly at the primary coolant loop hot and cold leg dissimilar metal welds, which join the primary loop piping to the reactor pressure vessel and reside in the vicinity of the reactor core. The objective of this experimental study was to determine how ultrasonic transducers and adhesive couplants perform when exposed to irradiation in a test reactor to simulate and accelerate in-service exposure. Further, to achieve this objective, the signal stability of piezoelectric transducers and performance of adhesive couplants as a function of accumulated fast neutron fluence were characterized by collecting ultrasonic data in-situ during irradiation. Of particular interest were the ultrasonic signal quality and time decay of the amplitude of acoustic reflections as a function of fast neutron fluence. The results of the study showed that, of the 8 transducer/substrate sample assemblies tested, only 3 generated usable ultrasonic signals through the conclusion of the irradiation campaign. It was found that high temperature epoxy tends to ultrasonically couple the sensors to the substrates better than three types of refractory ceramic cements studied, as is supported by post irradiation examination. The results obtained through this experimental study will be utilized in the achievement of the overall goal of development of a sensor system to perform online monitoring of primary loop components.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS2004

Dynamic SDRAM SEFI Detection and Recovery Test Results

Single event functionality interrupt (SEFI) results are presented for Hynix SDRAMS. The SEFI response threshold is below LET 9.9 Mev-cm(exp 2)/mg and the saturated cross section is 6 x 10(exp -5)cm(exp 2). Dynamic SEFI identification was made, and in-situ recovery restored functionality. Verification results of the identification algorithm are presented. An observed high current radiation response is also presented.

radiation effects↗
DOE OSTI2023

Mainstream nitrogen removal from low temperature and low ammonium strength municipal wastewater using hydrogel-encapsulated comammox and anammox

Application of partial nitritation (PN)-anammox to mainstream wastewater treatment faces challenges in low water temperature and low ammonium strength. In this study, a continuous flow PN-anammox reactor with hydrogel-encapsulated comammox and anammox was designed and operated for nitrogen removal from mainstream wastewater with low temperature. Long-term operation with synthetic and real wastewater as the feed demonstrated nearly complete ammonium and total inorganic nitrogen (TIN) removal by the reactor at temperatures as low as 10 °C. A significantly decreased nitrogen removal performance and biomass activity was observed in the reactor at 4 °C before a selective heating strategy was employed. A novel heating technology using radiation to heat carbon black co-encapsulated in the hydrogel matrix with biomass was used to selectively heat biomass but not water in the treatment system. This selective heating technology enabled nearly complete ammonium removal and 89.4 ± 4.3 % TIN removal at influent temperature of 4 °C and reactor temperature 5 °C. Activity tests suggested selective heating brought the biomass activity at influent temperatures of 4 °C and reactor temperature 5 °C to a level comparable to that at 10 °C. Comammox and anammox were consistently present in the system and spatially organized in the hydrogel beads as revealed by qPCR and fluorescence in-situ hybridization (FISH). The abundance of comammox largely decreased by 3 orders of magnitude during the operation at 4 °C, and rapidly recovered after the application of selective heating. The anammox-comammox technology tested in this study essentially enabled mainstream shortcut nitrogen removal, and the selective heating ensured good performance of the technology at temperature as low as 5 °C.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1994

Description of the COMRADE experiment

The COMRADE experiment is designed to return minimally degraded particles to earth along with complete in situ information concerning mass, velocity, and trajectory of encountered particles. The objectives of the program are very diverse. A set of flight-tested active detectors will be combined in an array to identify some of the physical properties of an incident grain, e.g., velocity vector, momentum, and mass. The use of passive detectors gives access to the chemical and isotopical properties of the grains in the micrometer size range. We are concerned simultaneously with a destructive capture, using metallic collectors, and a nondestructive capture, using a new low-density target in which the impacting grains stop, practically intact. The primary objectives for this mission are (1) to identify the particle remnants of the micrometer-sized grains having impacted on purposely designed metallic collectors, for complete and detailed chemical, isotopic, and organic analysis, thereby determining grain composition as well as the existence of organic and inorganic molecules, to be related with the possible cometary origin of the grains showing an extraterrestrial signature; (2) to return captured intact particles to earth for complete and detailed chemical, isotopic, spectral, mineralogical, and organic analysis, thereby determining grain composition as well as the existence of organic and inorganic molecules; and (3) to capture micrometer/submicrometer dust grains in a manner that ensures minimal particle degradation and guarantees state-of-the-art confidence in measurement of the in situ particle parameters including trajectory, velocity vector, mass, and flux distributions.

Borg, Janet↗
NASA NTRS1986

In situ stratospheric ozone measurements by long path UV absorption - Developments and interpretation

A high-sensitivity, in situ UV absorption ozone sensor has been developed for use in the stratosphere. The instrument couples 254-nm radiation from a low-pressure mercury discharge lamp into a 40-pass White cell to attain a high-sensitivity ozone absorption measurement. Preflight/postflight laboratory tests utilizing an ozone source coupled to a laboratory UV ozone photometer in a fast-flow system as well as in-flight diagnostics verify the successful operation of the instrument. Evidence is presented to verify that in situ UV absorption ozone photometers can measure stratospheric ozone with better than 3 percent precision and 5 percent accuracy, provided proper attention is given to both the thermal field surrounding the gondola and the ambient pressure measurements. Ozone data are compared with modeled profiles in the 28- to 40-km region. An assessment of the disagreement between observations and modeled profiles is given along with suggestions for future experiments designed to constrain photochemical models.

Weinstock, E. M.↗
DOE OSTI2020

Propane Dehydrogenation on Single-Site [PtZn4] Intermetallic Catalysts

Propane dehydrogenation (PDH) is a commercial propylene production technology that has received much attention, but high reaction temperature results in decrease of propylene selectivity and catalyst stability. This paper describes a single-site [PtZn 4 ] catalyst by assembling atomically ordered intermetallic alloy (IMA) as a selective and ultrastable PDH catalyst. The catalyst enables more than 95% propylene selectivity from 520 to 620 oC. No obvious deactivation is observed within 160-hours test, superior to PtSn/Al 2 O 3 and state-of-the-art Pt-based catalysts. Additionally, based on in situ X-ray absorption fine-structure, X-ray photoelectron spectroscopy measurements and density functional theory calculations, we reveal that the surface [PtZn 4 ] ensembles in PtZn IMAs serve as the key active site structures, wherein the geometry-isolated and electron-rich Pt1 site in [PtZn 4 ] ensembles readily promotes the first and second C–H cleavage of propane, but inhibits further dehydrogenation of surface-bounded propylene. This significantly improves the selectivity and stability by prohibiting coke side reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Temperature-dependent deformation behavior of a CuZr-based bulk metallic glass composite

In this study, the effect of cryogenic testing temperatures on the deformation behavior of a CuZr-based bulk metallic glass composite (BMGC) has been investigated using in situ high energy X-ray diffraction. The yield strength and work-hardenability of the studied BMGC show an increasing trend from 298 K to 153 K. A higher yield strength at a lower temperature can be attributed to the larger difference in the volume shrinkage between the crystalline phase and the amorphous matrix. The increasing martensitic transformation degree of the crystalline phase from 298 K to 153 K results in the enhanced work-hardenability. These results lead to a better understanding of the temperature dependence of phase-transformation induced plasticity in CuZr-based BMGCs. (C) 2020 Elsevier B.V. All rights reserved.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Ecology of methyl-coenzyme M reductase encoding Thermoproteota

The recent demonstration that members of at least three classes of archaea affiliated with the Thermoproteota superphylum are involved in the production of the climate-active gas methane has sparked discussions about how well we understand the diversity of methanogens. Here, in this work, we show that members of all three of these lineages, as well as several other, yet uncultured and physiologically uncharacterized groups within the Thermoproteota that encode the key enzyme of anaerobic methane cycling, methyl-coenzyme M reductase (MCR), are widely distributed in anoxic ecosystems. We postulate that the taxonomic, metabolic, and ecological diversity of methanogenic and MCR-encoding Thermoproteota are poorly understood, and that the contribution of methylotrophic and thermoproteotal methanogenesis to methane production is largely unknown. We hypothesize that thermoproteotal methanogens could contribute, potentially substantially, to methane emissions in many anoxic environments that harbor methylated precursors, including wetlands, sediments, peat, rice paddies, wastewater sludge, and geothermal systems. We highlight the necessity to experimentally test the (eco)physiology of these widely distributed archaea using both culture-dependent ( in vitro ) and culture-independent ( in situ ) approaches to assess their potential contribution to methane emissions. Last, we stress the importance of remaining agnostic about the physiology of MCR-encoding Thermoproteota in the absence of experimental data because most of these archaea also carry the genetic potential to grow non-methanogenically.

MCR↗
DOE OSTI2021

Strain rate effects on the mechanical behavior of porous titanium with different pore sizes

High strain-rate (up to 6600 s –1 ) and quasi-static compression tests are conducted on a powder-sintered porous titanium with different pore sizes (mean: 30 μm and 120 μm). In situ X-ray imaging is implemented to characterize the pores-scale deformation dynamics. The yield strength as a function of strain rate exhibits two stages of rate sensitivity, and the transition occurs at 1600 s –1 . X-ray images show that pore compaction and strain localizations occur preferentially at pores oriented perpendicular to the loading direction under quasi-static loading, but become more random under high strain-rate loading as a result of higher driving force and plastic deformation nucleation rate. Here, the more homogeneous nucleation of plastic deformation contributes to the increased rate sensitivity beyond 1600 s –1 . At the same strain rate, the yield strength of porous Ti as well as strain field homogeneity decreases significantly with increasing pore size. The small pore spacing in fine-pored Ti reduces the degree of stress concentrations around pores. Therefore, the higher stress concentrations in coarse-pored Ti lead to an earlier yield of matrix around pores and thus a lower bulk yield strength.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Laser-assisted embedding of all-glass optical fiber sensors into bulk ceramics for high-temperature applications

We develop a laser-assisted sensor embedding process to embed all-glass optical fiber sensors into bulk ceramics for high-temperature applications. A specially designed two-step microchannel was fabricated on an Al 2 O 3 substrate for sensor embedment using a picosecond (ps) laser. An optical fiber Intrinsic Fabry-Perot Interferometer (IFPI) sensor was embedded at the bottom of the microchannel and covered by Al 2 O 3 slurry which was subsequently sintered by a CO 2 laser. The sensor spectrum was in-situ monitored during the laser sintering process to ensure the survival of the sensor and optimize the laser sintering parameters. By testing in furnace through high temperature, the embedded optical fiber shows improved stability after CO 2 laser sealing, resulting in the linear temperature response of the embedded optical fiber IFPI sensor. To improve the embedded IFPI sensor for thermal strain measurement, a dummy fiber was co-embedded with the sensing fiber to improve the mechanical bonding between the sensing fiber and the ceramic substrate so that the thermal strain of the ceramic substrate can apply on the sensing fiber. The response sensitivity, measurement repeatability and high-temperature long-term stability of the embedded optical fiber IFPI sensor were evaluated in this work.

47 OTHER INSTRUMENTATION↗