Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fusion experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Correction for Neutral Pressure-Driven Signal in Radiated Power Measurements on Proto-MPEX

A pinhole camera using four-channel resistive bolometers was designed and implemented on the Prototype Material Plasma Exposure eXperiment (Proto-MPEX) to measure the plasma radiated power. Quantification of the radiated power is required for comprehensive power balance assessments but faces unique challenges on linear plasma devices due to weak absolute signal, compared to typical use in toroidal fusion plasmas, and high neutral pressure changes. Around 1 mTorr, the pressure-driven signal contribution was shown to overwhelm the radiated power signal in Proto-MPEX, found to be ~3 μW . Since the pressure-driven signals could not be predicted from first principle arguments, the signals were corrected using empirical models that take two experimental pressure measurements and the raw bolometer signal to reveal the radiated power signals. Four “gas-only” Proto-MPEX shots were taken, without the radio frequency (rf) plasma discharge, to train, optimize, and validate empirical models. The data included two pressure measurements at different locations along with the bolometer signal. Multiple models were tested; partial least-squares regression with a cross correlation method to account for the time offset in the pressure measurements provided the best combination of accuracy and stability. The model was validated to have a modeling error of 0.0036 V, which was lower than 10% of the expected radiated power signal. The model was tested on a different “gas-only” shot with a complete time-series data. For plasma operation shots, the corrected bolometer measurements were compared with an absolute extreme ultraviolet photodiode measurement and similarities and differences are discussed.

Lee, Seungsup↗

Taming harmful bursts and heat flux in high-confinement tokamak plasmas

A major challenge in tokamak fusion research is first-wall erosion caused by steady heat loads and sudden energy bursts known as edge-localized modes. Divertor detachment reduces steady-state heat flux, while resonant magnetic perturbations can suppress these instabilities. However, integrating the two has been difficult because they require conflicting operating conditions. Here we demonstrate simultaneous achievement of resonant magnetic perturbations mitigated small edge-localized modes and impurity seeded partial divertor detachment in plasmas with an ITER-similar shape on the DIII-D tokamak. Experiments and simulations show that resonant magnetic perturbations facilitate detachment by redistributing particles, lowering the core density and increasing the scrape-off layer density, thereby reducing the amount of injected gas required. Cooling-gas injection eliminates the secondary heat-flux peak created by three-dimensional magnetic lobes, while edge cooling weakens the plasma response to the applied magnetic fields. These advances illustrate a viable pathway for integrating edge stability control with power exhaust in future fusion reactors.

magnetically confined plasmas↗

The Untold Story of Building the First Megaton Thermonuclear Fusion Device: The Simple Element and IVY Mike

This report is a research and development engineer’s perspective on the fascinating story of the world’s first megaton-class thermonuclear device, IVY Mike (10.4 Mt). Few modern scientific endeavors have matched the complexity and breadth of scientific achievement in such a short amount of time as IVY Mike. This paper will take a look at the design, engineering, fielding, and execution of the world’s first megaton-class physics experiment by Los Alamos Scientific Laboratory and the birth of industrial liquid hydrogen use spawned by the Cold War effort. Although others have written on aspects of this technical history, they have not benefited from access to the original classified documents used by the present author. The present paper must necessarily omit some technical details that remain classified but represents the most comprehensive summary of the engineering and fabrication of the IVY Mike device in the open literature.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

How data science methods can improve the quality and efficiency of ICF and HEDP research

Data Science methods (many that are Bayesian based) are widely used in the physical sciences to estimate model parameters from experimental data, synthesize heterogeneous data, calibrate models, design experiments, and determine statistical significance of data. These methods provide a wealth of advantages over traditional analysis techniques because: 1) uncertainties are rigorously defined and propagated naturally through complex systems including covariance, 2) prior information is captured within the analysis framework (including rad-MHD and rad-hydro simulations), 3) competing models can be selected and/or ruled out using quantitative criteria, and 4) complex, heterogeneous data can be incorporated simultaneously. While these methods have been widely adopted as the gold standard in fields such as particle physics, astronomy, and biology, they have been slow to catch on in Inertial Confinement Fusion (ICF) and High Energy Density Physics (HEDP) research. Recently, several teams at LLNL, SNL, LANL, and the LLE have been exploring the use of these tools in their research and have found success. Here we propose that a concerted effort to consolidate these independent research efforts by developing and deploying common tools for use across the complex can revolutionize the way we approach data analysis, assimilation of theory and experiment, and decision making. The Bayesian formalism provides a means to accomplish this, but we are lacking certain infrastructure to make it happen on a large scale. Furthermore, once adopted, these techniques can be used to develop standards by which discoveries can be judged, similar to the so-called 5σ rule in high energy particle physics. Such standards may be used in the future to address the issue of unknown reproducibility in ICF and HED experiments caused by low shot rate and high cost per experiment. Our goals as a group are to advance the state of the art in HED measurement science by enabling: 1) better inferences from data with well-defined uncertainties, 2) better use of the data we have and continue to collect, 3) intelligent synthesis of data, 4) evaluation of the statistical significance of our data, and 5) informed decision making regarding the design of new experiments and instruments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A simple vacuum suitcase for enabling plasma facing component characterization in fusion devices

We have demonstrated a vacuum suitcase to transport samples in vacuo to a surface analysis station for characterization of tokamak plasma facing components (PFCs). This technique enables surface analysis at powerful, dedicated stations that are not encumbered by design constraints imposed on them by a tokamak. The vacuum suitcase is an alternative solution to characterizing PFCs using diagnostics that are designed and built around a tokamak. The vacuum suitcase, called the Sample Exposure Probe (SEP), features mobile ultra-high vacuum pumping. Active pumping under high vacuum enables sample transfer between the Lithium Tokamak eXperiment-β (LTX-β) and a high resolution X-ray Photoelectron Spectroscopy (XPS) system that is situated close by. A thermocouple inserted in the back of the sample head measures heat flux from the plasma during exposure, and together with a button heater, allows the sample to match the LTX-β PFCs in high temperature operations. As vacuum conditions are better during transfer and analysis than in the tokamak, less contamination is introduced to the samples. XPS scans on a dedicated analysis station enable peak identification due to higher resolution and signal to noise ratio. A similar probe could be implemented for other fusion devices. As a result, the SEP is the first vacuum suitcase implementation for fusion applications that incorporates active pumping.

47 OTHER INSTRUMENTATION↗

Evaluation of Nickel Alloys, Manufactured through Powder Bed Fusion, for Application for Advanced Nuclear Reactors

In collaboration with other laboratories, Idaho National Laboratory has investigated additively manufactured alloys for applications in advanced nuclear reactors. The primary focus has been on nickel alloys, as well as “other” alloys, which are alloys not considered steel nor nickel-based alloys, manufactured by laser powder bed fusion. Suitability of investigated alloys were considered against a matrix of properties of interest, developed jointly with the collaborating laboratories. For the nickel alloys, Alloys 282 and 625 are considered promising due to their properties, existing data, and availability of commercial powder feedstock. Haynes 244 is also of interest for its molten salt corrosion resistance, however there is no current feedstock supply chain, and no experience with this alloy as an additively manufactured material. Iron-chrome-aluminum alloys, titanium alloys, zirconium alloys, ceramics, and ceramic inclusions were all considered within the other alloys category. The results and discussions within this report will be compiled with the investigations from the other collaborating laboratories and compiled into a final report later this year (2023).

36 MATERIALS SCIENCE↗

Chemical composition based machine learning model to predict defect formation in additive manufacturing

With a goal of exploiting additive manufacturing to improve the manufacturing of existing reactor materials, we developed a chemical composition-based machine learning model to predict the printability of any given alloy in laser powder bed fusion (L-PBF) using experimental data from peer-reviewed literature. We defined printability as the ability to avoid defects like cracking, balling, porosity, and lack of fusion, that are caused by thermal stresses (during solidification or liquation), molten pool disintegration into disconnected small beads or lack of heat input respectively. Our models predict the tendency of balling defect formation and porosity percentage for a given composition, under a given set of processing conditions. To predict the likelihood of balling defect, three models: a random forest classifier, a gradient boost regressor and a neural network were trained on a dataset containing both traditional alloys and high entropy alloys. The neural network model showed the highest accuracy of 92.3 % in predicting the balling defect formation. A random forest regressor, gradient boost regressor and neural network were trained and tested on a dataset of various alloys to predict porosity. The random forest regressor showed the best predictions with an R 2 score of 0.97. The models also revealed the relative importance of the input descriptors on defect-formation tendency. Of particular significance was the identification of carbon as an important element in determining the occurrence of balling and percent porosity in alloys like steel, as well as being moderately important to the percentage porosity in other alloys as well as steel. Manganese was also identified as a key descriptor for the percentage of porosity in steel and other alloys. Manganese’s low thermal conductivity and consistent presence in the dataset is the likely cause for its contribution. Carbon’s role is attributable to its relatively high specific heat and high melting temperature. In conclusion, our model serves as a swift, chemistry-based tool to design experiments and find modified compositions better suited for additive manufacturing.

36 MATERIALS SCIENCE↗

Search for a heavy pseudoscalar Higgs boson decaying into a 125 GeV Higgs boson and a Z boson in final states with two tau and two light leptons at $\sqrt{s}=$ 13 TeV

A search is performed for a pseudoscalar Higgs boson, A, decaying into a 125 GeV Higgs boson h and a Z boson. The h boson is specifically targeted in its decay into a pair of tau leptons, while the Z boson decays into a pair of electrons or muons. A data sample of proton-proton collisions collected by the CMS experiment at the LHC at $ \sqrt{s} $ = 13 TeV is used, corresponding to an integrated luminosity of 35.9 fb$^{−1}$. No excess above the standard model background expectations is observed in data. A model-independent upper limit is set on the product of the gluon fusion production cross section for the A boson and the branching fraction to Zh → ℓℓττ. The observed upper limit at 95% confidence level ranges from 27 to 5 fb for A boson masses from 220 to 400 GeV, respectively. The results are used to constrain the extended Higgs sector parameters for two benchmark scenarios of the minimal supersymmetric standard model.[graphic not available: see fulltext]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

In-Situ Laser-Induced-Desorption-Spectroscopy Diagnostic Deployment on the Linear Plasma Device CSDX

A calibrated laser induced desorption diagnostic (LIDS) concept is developed under this award for application to fusion relevant plasma materials interactions studies. Small areal amounts of hydrogenic release from a deuterium filled PMI target are measured and quantified when irradiated by a LID flash heat event on the target surface. Good success was demonstrated by this project with the PISCES-E rf plasma device at UCSD by fully quantified measurement and removal of D from W-D co-deposit layers in experiments. However, adapting the LIDS technique to D plasma exposed W targets in the linear plasma CSDX device, now labelled PISCES-Rf, was prone to several technical challenges ranging from target line of sight access, laser focusing, and loss of optical spectroscopic signal strength in the larger PISCES-Rf vacuum system. The results are summarized in this report.

08 HYDROGEN↗

A high-density and high-confinement tokamak plasma regime for fusion energy

The tokamak approach, utilizing a toroidal magnetic field configuration to confine a hot plasma, is one of the most promising designs for developing reactors that can exploit nuclear fusion to generate electrical energy. To reach the goal of an economical reactor, most tokamak reactor designs simultaneously require reaching a plasma line-averaged density above an empirical limit—the so-called Greenwald density and attaining an energy confinement quality better than the standard high-confinement mode. However, such an operating regime has never been verified in experiments. In addition, a long-standing challenge in the high-confinement mode has been the compatibility between a high-performance core and avoiding large, transient edge perturbations that can cause very high heat loads on the plasma-facing-components in tokamaks. Here we report the demonstration of stable tokamak plasmas with a line-averaged density approximately 20% above the Greenwald density and an energy confinement quality of approximately 50% better than the standard high-confinement mode, which was realized by taking advantage of the enhanced suppression of turbulent transport granted by high density-gradients in the high-poloidal-beta scenario. Furthermore, our experimental results show an integration of very low edge transient perturbations with the high normalized density and confinement core. The operating regime we report supports some critical requirements in many fusion reactor designs all over the world and opens a potential avenue to an operating point for producing economically attractive fusion energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Isotope effects under the influence of global radial electric fields in a helical configuration

Isotope effects under the influence of a radial electric field are examined in a helical magnetic field configuration. We perform global gyrokinetic simulations with additional poloidal rotations to estimate quasi-linear heat flux due to ion temperature gradient mode under the mixing length model. In single-ion-species plasmas, the mass number dependency of heat flux agrees with gyro-Bohm scaling in the absence of a radial electric field. Favorable mass number dependencies violating gyro-Bohm scaling are observed in the presence of a global radial electric field or a heavy hydrogen component in multi-ion-species plasmas. The radial electric field and the heavy hydrogen component affect the heat flux through an increase of wavelength as well as mode stabilization. Poloidal Mach number characterizes the transition from unfavorable to favorable mass number dependency under radial electric fields. While the heat flux is independent of mass number for a given poloidal Mach number, the heat flux decreases for higher mass numbers in a given radial electric field. The heat flux is also independent of average mass number in multi-ion-species plasmas because the heavy hydrogen component effectively enhances the light hydrogen heat flux. The present results are potentially relevant to the violation of gyro-Bohm scaling observed in the recent deuterium experiments in the Large Helical Device.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

First-principles study of L -shell iron and chromium opacity at stellar interior temperatures

Recently developed free-energy density functional theory (DFT)-based methodology for optical property calculations of warm dense matter has been applied for studying L-shell opacity of iron and chromium at T = 182 eV. We use Mermin–Kohn–Sham density functional theory with a ground-state and a fully temperature-dependent generalized gradient approximation exchange-correlation (XC) functionals. It is demonstrated that the role of XC at such a high-T is negligible due to the total free-energy of interacting system being dominated by the noninteracting free-energy term in agreement with estimations for the homogeneous electron gas. Furthermore, our DFT predictions are compared to the radiative emissivity and opacity of dense plasmas model, to the real-space Greens function method, and to experimental measurements. Good agreement is found between all three theoretical methods, and in the bound–continuum region for Cr when compared to the experiment, while the discrepancy between direct DFT calculations and the experiment for Fe remains essentially the same as for plasma-physics models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Exploring the Basic Physical Mechanisms of Cathode- and Anode-Initiated High-Voltage Surface Flashover

Surface flashover in vacuum imposes a substantial physical limit on modern, large-scale pulsed power. One of the ramifications is a minimum size requirement for new machines, which in itself becomes a hard barrier to the modernization and improvement of existing infrastructure. Pulsed power topologies require the physical mechanisms of both anode- and cathode-initiated flashover to be considered. Originally, the geometrical implications of field emission at the cathode triple junction (CTJ) motivated the usage of configurations that avoid electrons impinging on the insulating material. This will largely suppress the cathode-initiated flashover, which is best described by the secondary electron avalanche mechanism, gas desorption, and final breakdown in the desorbed gas. It depends on the cascade growth of a conducting plasma along the length of the insulator from the cathode. Mitigating the cathode-initiated flashover typically comes at the cost of a significant field enhancement at the anode triple junction (ATJ). In a typical implementation, the anode field may be three times higher than the cathode field for a given voltage, making the corresponding anode-initiated flashover much more common than otherwise. In the case of pulsed, anode-initiated flashover, experimental evidence suggests that charge is directly extracted from the insulator resulting in the insulator taking on a net positive charge advancing the anode potential. Furthermore, along with accompanying gas desorption from the surface, the potential will then propagate from the anode toward the cathode until the effective length of the gap is sufficiently reduced to support flashover. The underlying physical mechanisms of cathode- and anode-directed flashover are discussed in light of previously gathered experimental data and recent experiments with pulsed, high-gradient, anode-initiated flashover.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast-ion confinement in LHD and W7-X (Final Technical Report)

This project was the PhD thesis project for Wataru Hayashi, who graduated in December 2025. In work performed prior to the award while Heidbrink was a Guest Professor at NIFS, we had established conditions for the study of fast-ion confinement in the Large Helical Device (LHD) with fast-ion D-alpha (FIDA) diagnostics. Subsequently, we proposed new sightlines that could augment the existing FIDA measurements with ones that were more sensitive to the highest energy ions. During the project period, the new sightlines were installed by the LHD team and showed the expected enhanced sensitivity to high-energy ions. Many LHD experiments were led by UCI scientists remotely during the pandemic and in-person afterward. One of these, which was led by one of Professor Zhihong Lin’s PhD students (Ethan Green) in collaboration with Hayashi and Heidbrink, resulted in a Nuclear Fusion article on the effect of radial electric fields on fast-ion confinement. The main output of the project, however, is two detailed experimental papers by Hayashi et al. The first of these is a study of neoclassical fast ion confinement in MHD-quiescent plasmas, a key issue in stellarator research. The second is an initial study of the effect of Alfven eigenmodes on fast-ion confinement. In addition to these studies, the project also helped partially support stellarator research with the GTC code by members of Prof. Lin’s group.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Sensitivities of time-dependent temperature profile predictions for NSTX with the multi-mode model

The Multi-Mode Model (MMM) for turbulent transport was applied to a large set of well-analyzed discharges from the National Spherical Torus Experiment (NSTX) in order to evaluate its sensitivities to a wide range of plasma conditions. MMM calculations were performed for hundreds of milliseconds in each discharge by performing time-dependent predictive simulations with the 1.5D tokamak integrated modeling code TRANSP. A closely related study (Lestz et al 2025 Plasma Phys. Control. Fusion 67 105029) concluded that MMM predicted electron and ion temperature profiles that were in reasonable agreement with NSTX observations, generally outperforming a different reduced transport model, TGLF. This finding motivates the more thorough investigation of the characteristics of the MMM predictions conducted in this work. The simulations with MMM have electron energy transport dominated by electron temperature gradient modes in the examined discharges with relatively low plasma β (ratio of kinetic plasma pressure to magnetic field pressure) and high collisionality, transitioning to a mixture of different modes for higher β and lower collisionality. The thermal ion diffusivity predicted by MMM is much smaller than the neoclassical contribution, in line with previous experimental analysis of NSTX. Nonetheless, the electron and ion temperature profiles are coupled via collisional energy exchange and thus sensitive to which transport channels are predicted. The time-dependent simulations with MMM are robust to the simulation start time, converging to remarkably similar temperature profiles later during the discharge. MMM typically overpredicts confinement relative to NSTX observations, leading to the prediction of overly steep temperature profiles. Plasmas with spatially broader temperature profiles, higher plasma β, and longer energy confinement times tend to be predicted by MMM with better agreement with the experiment. As a result, these findings provide useful context for understanding the regime-dependent tendencies of MMM in anticipation of self-consistent, time-dependent predictive simulations of NSTX-U discharges with these same modeling tools.

MMM↗

Converging towards atomic and nuclear pressures (Final Report)

his report details the development of transformational tools and techniques, allowing the accurate characterization of matter at the most extreme conditions yet studied in the high energy density (HED) domain. Before this work, most experiments quantitatively mapping the nature of matter in the HED realm were performed using planar geometry, which allows for the isolation and measurement of variables in a single thermodynamic state. Such measurements include equation of state variables, optical conductivity, heat transport and more. However, due to a variety of plasma processes, such experiments are limited to below ~10 TPa (100 Mbar) pressures. To achieve higher pressures, convergent experiments are needed. Historically, convergent experiments have not been used for benchmark data because they are integral measurements. That is each part of a convergent target undergoes a time dependent wide range of states, making it difficult to accurately isolate any particular quantity for a given thermodynamic state. This effort developed innovative convergent HED platforms and techniques enabling the exploration of matter from atomic to nuclear scale pressures. This effort also performed pioneering experiments that yielded the first rigorous benchmark data at these extreme conditions. This funding award began with the overarching goal to understand the behavior of matter at extreme (atomic-to-nuclear scale) pressures. The motivation for these goals lie in the fact that every time scientists explore matter beyond the threshold of an atomic unit, there is a fundamental shift in science. The atomic unit for energy, mass, charge, length, and time have each been explored, and each time such a threshold was crossed, a new sequence of discoveries was made resulting in significant awards such as the Nobel Prize. The only unexplored atomic unit is pressure, and this effort set the course for exploring matter at and beyond such pressures. That most of the recently discovered extrasolar planets and stars, as well as matter in the late implosion stages of inertial fusion targets, have deep internal pressures at and beyond atomic pressures amplifies the importance of this effort. Much of the initial work in developing techniques to create these atomic-to-nuclear pressures already existed within the HED community, predominantly at large scale laser facilities such as the National Ignition Facility (NIF) and the Omega60 laser the University of Rochester and although these experiments were routinely performed the ability to extract information about the underlying physical states and processes remained elusive due to the complexity of the experiments, extreme scales in both time and space, and the integrated nature of all the measurements. This work built a rigorous framework so such measurements can routinely be made. This was done in part through the introduction of Bayesian inference techniques into the field of HED science. These techniques allow for the self-consistent extraction of the relevant variables and their explicit and implicit correlations, so as to make use of integrated experimental data to constrain physical models and provide accurate uncertainty bounds for the data. The techniques developed here are fully transparent and proved immediately useful providing quantitative rigorous benchmarks for physical states and processes at some of the most extreme conditions yet explored on Earth. This funding is directly or partly responsible for 7 publications in major peer-reviewed scientific journals, a doctoral thesis, 3 invited talks at major conferences, and the training of a post-doc, 2 graduate students, and 1 undergraduate student. Beyond the effort supported by this award launched the introduction of Bayesian inference into the HED physics community and helped push the usage if modern data-science techniques within the physics community at large.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic Reconnection

Magnetic reconnection is a fundamental plasma physics process ubiquitous in astrophysics, and important in both magnetic confinement fusion and space weather. The MARZ fundamental science program was recently established on Z to enable the first laboratory astrophysics platform able to access and study the strongly radiatively cooled magnetic reconnection regime. Simulations of this system have successfully used a resistive-MHD approach, but in some regions of parameter space Hall physics has the potential to be important. We describe implementation of a Hall method on a staggered grid resistive-MHD method (compatible with the approach used to model MARZ experiments. We then present a different Hall method based on cell-centered field quantities. Both approaches have been implemented in the Sandia KRAKEN code, to enable us to contrast different numerical Hall-MHD methods within the same HED code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Lasergate: A windowless gas target for enhanced laser preheat in magnetized liner inertial fusion

At the Z Facility at Sandia National Laboratories, the magnetized liner inertial fusion (MagLIF) program aims to study the inertial confinement fusion in deuterium-filled gas cells by implementing a three-step process on the fuel: premagnetization, laser preheat, and Z-pinch compression. In the laser preheat stage, the Z-Beamlet laser focuses through a thin polyimide window to enter the gas cell and heat the fusion fuel. However, it is known that the presence of the few μm thick window reduces the amount of laser energy that enters the gas and causes window material to mix into the fuel. These effects are detrimental to achieving fusion; therefore, a windowless target is desired. The Lasergate concept is designed to accomplish this by “cutting” the window and allowing the interior gas pressure to push the window material out of the beam path just before the heating laser arrives. In this work, we present the proof-of-principle experiments to evaluate a laser-cutting approach to Lasergate and explore the subsequent window and gas dynamics. Further, an experimental comparison of gas preheat with and without Lasergate gives clear indications of an energy deposition advantage using the Lasergate concept, as well as other observed and hypothesized benefits. While Lasergate was conceived with MagLIF in mind, the method is applicable to any laser or diagnostic application requiring direct line of sight to the interior of gas cell targets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗