Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “frequency estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Coherence limits for very-long-baseline interferometry

The quality of the frequency standards used in very-long-baseline interferometry (VBLI) limits the coherent integration time and the accuracy of geodetic experiments except in special cases when clock instabilities can be made to cancel out by using differential interferometry. Formulas are derived for estimating the coherence of these interferometers from the Allan variances of the frequency standards. Experiments using extremely high-quality frequency standards, such as hydrogen masers, may be limited by the phase noise that results from atmospheric and ionospheric fluctuations.

Rogers, A. E. E.↗

Recent Advances in SMAP RFI Processing

The measurements made by the Soil Moisture Active/Passive (SMAP) mission are affected by the presence of Radio Frequency Interference (RFI) in the protected 1400-1427 MHz band. In SMAP data processing, the main protection against RFI is a sophisticated RFI detection algorithm which flags sub-samples in time and frequency that are contaminated by RFI and removes them before estimating the brightness temperature. This contribution presents two additional approaches that have been developed to address the RFI concern in SMAP. The first consists in locating sources of RFI; once located, it becomes possible to report RFI sources to spectrum management authorities, which can lead to less RFI being experienced by SMAP in the future. The second is a new RFI detection method that is based on detecting outliers in the spatial distribution of measured antenna temperatures.

Radio Frequency Interference↗

Evaluating the Effects of Precipitation and Evapotranspiration on Soil Moisture Variability Within CMIP5 Using SMAP and ERA5 Data

=The effects of precipitation (Pr) and evapotranspiration (ET) on surface soil moisture (SSM) play an essential role in the land-atmosphere system. Here we evaluate multimodel differences of these effects within the Coupled Model Intercomparison Project Phase 5 (CMIP5) compared to Soil Moisture Active Passive (SMAP) products and ECMWF Reanalysis v5 (ERA5) as references in a frequency domain. The variability of SSM, Pr, and ET within three frequency bands (1/7 ~ 1/30 days -1 , 1/30 ~ 1/90 days -1 , and 1/90 ~ 1/365 days -1 ) after normalization is quantified using Fourier transform. We analyze the impact of ET and Pr on SSM variability based on a transfer function assuming that these variables form a linear time-invariant (LTI) system. For the total effects of ET and Pr on SSM variability, the CMIP5 estimations are smaller than the reference data in the two higher frequency bands and are larger than the reference data in the lowest frequency band. Besides, the effects on SSM by Pr and ET are found to be different across the three frequency bands. In each frequency band, the variability of the factor that dominates SSM (i.e., Pr or ET) from CMIP5 is smaller than that from the references. This study identifies the spatiotemporal distribution of differences between CMIP5 models and references (SMAP and ERA5) in simulating ET and Pr effects on SSM within three frequency bands. This study provides insightful information on how soil moisture variability is affected by varying precipitation and evapotranspiration at different time scales within Earth System Models.

54 ENVIRONMENTAL SCIENCES↗

Misclassification in Workers’ Telecommuting Frequency Choices Using a Generalized Extreme Value Model

Telecommuting frequency is a response variable collected in travel surveys and is, therefore, prone to errors leading to mismeasurements or misclassification. Misclassification of explanatory variables is a common risk when using statistical modeling techniques. We define “misclassification” as a response reported or recorded in the wrong category; for example, a variable is recorded as a 1 when it should be 0. Here, in this context, this study aims to develop a statistical model to analyze telecommuting data which accounts for potential misclassification errors by building on existing literature in econometrics. The empirical analysis was undertaken using the 2017 National Household Travel Survey (NHTS) and the general extreme value (GEV) models available in the literature. Specifically, the frequency of telecommuting days was analyzed using the negative binomial (NB) model recast as the multinomial logit (MNL) model. By nature—and consistent with other studies—NHTS data are prone to errors that can be classified as intentional or unintentional misinformation provided by the person being interviewed. Ignoring these errors while modeling telecommuting frequencies using standard discrete count models can result in biased parameter estimates. The misclassification parameter was calculated for both over-reporting and under-reporting scenarios. The misclassification errors can be as high as 14% over-reported and 10% under-reported, particularly for the neighboring values. Statistical fit comparison between the models shows that models that ignore misclassification have worse data fit and biased parameter estimates with significant policy implications.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Analyses of 1994 Typhoons in the Taiwan Region Using Satellite Data

Taiwan is situated in the prevalent typhoon track in the northwestern Pacific. On average, about one third of the island total annual precipitation is due to typhoons, with the other two third being contributed by the summer monsoon, or Meiyu, and wintertime large scale frontal rainfall. While the typhoons bring the needed moisture for agricultural consumption and industrial utilization, heavy rainfall associated with typhoons often result in large scale flooding and land slide. The prediction of the typhoon track and its severity is therefore a high priority topic both for operation and research. The severity of a typhoon can be defined in terms of the wind strength and the moisture content. The Special Sensor Microwave/Imager (SSM/I) on board of the Defense Meteorological Satellite Program (DMSP) satellites measures microwave radiation in 19.4, 22.2, 37, and 85.5 GHz. These measurements provide an opportunity to estimate parameters such as surface wind speed, water vapor and cloud water contents, and rainfall rate over oceans. In 1994, Taiwan experienced an above normal frequency of typhoon hits, five typhoons hit the island in two months. In this report, estimates of the moisture content of these typhoons are made based on the SSM/I measurements. An assessment of the relative strength of the typhoons are made with analyzed data.

Chang, A. T. C.↗

Symmetry breaking in O4(+): An application of the Brueckner coupled-cluster method

A recent calculation of the antisymmetric stretch frequency for the rectangular structure of quartet O4(+) using the singles and doubles quadratic configuration interaction method with a perturbational estimate of connected triple excitations (QCISD(T)) method gave a value of 3710 cm(exp -1). This anomalous frequency is shown to be a consequence of symmetry breaking effects, which occur even though the QCISD(T) solution derived from a delocalized SCF reference function lies energetically well below the two localized (symmetry-broken) solutions at the equilibrium geometry. The symmetry breaking is almost eliminated at the CCSD level of theory, but the small remaining symmetry breaking effects are magnified at the CCSD(T) level of theory so that the antisymmetric stretch frequency is still significantly in error. The use of the Brueckner coupled cluster method, however, leads to a symmetrical solution which is free of symmetry breaking effects, with an antisymmetric stretch frequency of 1322 cm(exp -1), in good agreement with our earlier calculations using the complete active space self consistent field/complete active space state interaction (CASSCF/CASSI) method.

Barnes, Leslie A.↗

Identification and localization of rotational spectra using recurrent neural networks

A method of identifying molecular parameters in a complex mixture may include receiving a set of combined transition frequencies and analyzing the set of combined transition frequencies using a first trained artificial neural network to generate a plurality of separated transition frequency sets. Each of the plurality of separated frequency sets may be analyzed using a second trained artificial neural network to generate a respective set of estimated spectral parameters. The method may include identifying a set of molecular parameters corresponding to the set of separated transition frequencies.

Prozuments, Kirills↗

Chapter 13: Errors and Uncertainties Associated with Quasi-Global Satellite Precipitation Products

Measuring precipitation on a global scale is only possible from satellite platforms. Satellite precipitation estimates are based on geosynchronous infrared sensors on geostationary satellites, characterized by high sampling frequency, and polar-orbiting microwave sensors on low-Earth-orbiting satellites with less-frequent sampling. Assessing satellite product performance is fundamental to infer the reliability of such estimates and effectively use them in water resources management, extreme event characterization, disease control, or weather forecasting. Nevertheless, errors and uncertainties associated with satellite precipitation products are often masked due to temporal and spatial sampling, as well as bias-corrections against a reference dataset. Moreover, the verification of satellite precipitation products is easier over land areas, where rain gauges and ground radars are available as benchmark, but extremely limited over the oceans. Substantial work still remains to better quantify relative and absolute errors and uncertainties within satellite-based precipitation products over land and oceans.

Viviana Maggioni↗

Precise mean sea level measurements using the Global Positioning System

This paper describes the results of a sea level measurement test conducted off La Jolla, California, in November of 1991. The purpose of this test was to determine accurate sea level measurements using a Global Positioning System (GPS) equipped buoy. These measurements were intended to be used as the sea level component for calibration of the ERS 1 satellite altimeter. Measurements were collected on November 25 and 28 when the ERS 1 satellite overflew the calibration area. Two different types of buoys were used. A waverider design was used on November 25 and a spar design on November 28. This provided the opportunity to examine how dynamic effects of the measurement platform might affect the sea level accuracy. The two buoys were deployed at locations approximately 1.2 km apart and about 15 km west of a reference GPS receiver located on the rooftop of the Institute of Geophysics and Planetary Physics at the Scripps Institute of Oceanography. GPS solutions were computed for 45 minutes on each day and used to produce two sea level time series. An estimate of the mean sea level at both locations was computed by subtracting tide gage data collected at the Scripps Pier from the GPS-determined sea level measurements and then filtering out the high-frequency components due to waves and buoy dynamics. In both cases the GPS estimate differed from Rapp's mean altimetric surface by 0.06 m. Thus, the gradient in the GPS measurements matched the gradient in Rapp's surface. These results suggest that accurate sea level can be determined using GPS on widely differing platforms as long as care is taken to determine the height of the GPS antenna phase center above water level. Application areas include measurement of absolute sea level, of temporal variations in sea level, and of sea level gradients (dominantly the geoid). Specific applications would include ocean altimeter calibration, monitoring of sea level in remote regions, and regional experiments requiring spatial and temporal resolution higher than that available from altimeter data.

Kelecy, Thomas M.↗

Structural and optical properties for typical solid mirror shapes

A method is developed to determine the weight, center of gravity, areal properties, and mass inertial properties for typical mirrors. A number of support conditions were considered to examine optical surface deflections, surface quality, and fundamental natural frequency for single- and double-arch mirror shapes. Structural performance estimates were made with the NASTRAN program, and optical performances were evaluated with the FRINGE program, using an SXA 40-in mirror. To show the behavior of element types from the NASTRAN program, finite element validity and sensitivity studies were performed in optical model applications. Material parameters, contoured back shapes, and support locations are shown to have significant effects on structural and optical performances. Optimal support locations and support points are given. Fundamental natural frequencies for some shapes are found with the closed-form solution. The plate models results may not be acceptable for determining real mirror optical performances.

Cho, Myung K.↗

Subdaily Earth rotation during the Epoch '92 campaign

Global Positioning System (GPS) data were used to estimate Earth rotation variations over an 11-day period during the Epoch '92 campaign in the summer of 1992. Earth orientation was measured simultaneously by several very long baseline interferometry (VLBI) networks. GPS and VLBI estimates of UT1 with 3-hour time resolution were then compared and analyzed. The high frequency behavior of both data sets is similar, although drifts between the two series of approximately 0.1 ms over 2-5 days are evident. The geodetic results were also compared with models for UT1 fluctuations at tidal periods and with estimates of atmospheric angular momentum made at 6-hour intervals. Most of the geodetic signal in the diurnal and semidiurnal frequency bands can be attributed to tidal processes, whereas UT1 variations over a few days are mostly atmospheric in origin.

Freedman, A. P.↗

Comparative Study of Optical and Radio-Frequency Communication Systems for a Deep-Space Mission

We have performed a study on telecommunication systems for a hypothetical mission to Mars. The objective of the study was to evaluate and compare the benefits that microwave-X-band (8.4 GHz) and Ka-band (32 GHz) - and optical communications technologies a afford to future missions. The telecommunication systems were required to return data after launch and in orbit at 2.7 AU with daily data volumes of 0.1, 1.0, or 10.0 Gbits (Gb). Spacecraft terminals capable of delivering each of the three data volumes were proposed and characterized in terms of mass, power consumption, size, and cost. The estimated parameters for X-band, Ka-band, and optical frequencies are compared and presented here. For all cases, the optical light terminal exhibits about 60 percent of the mass of the corresponding radio frequency (RF) subsystem. Power consumption is comparable for all three technologies at a 0.1 Gb/day data volume, but the power required at either Ka-band or optical is less than half of the X-band requirement at 10 Gb/day. These benefits can be obtained only with a suitable investment in reception facilities for Ka-band or optical frequencies.

Hemmati, H.↗

On the estimation of snow depth from microwave radiometric measurements

Multiple-channel microwave radiometric measurements made over Alaska at aircraft (near 90 and 183 GHz) and satellite (at 37 and 85 GHz) altitudes are used to study the effect of atmospheric absorption on the estimation of snow depth. The estimation is based on the radiative transfer calculations using an early theoretical model of Mie scattering of single-size particles. It is shown that the radiometric correction for the effect of atmospheric absorption is important even at 37 GHz for a reliable estimation of snow depth. Under a dry atmosphere and based on single-frequency radiometric measurements, the underestimation of snow depth could amount to 50 percent at 85 GHz and 20-30 percent at 37 GHz if the effect of atmospheric absorption is not taken into account. The snow depths estimated from the 90-GHz aircraft and 85-GHz satellite measurements are found to be in reasonable agreement. However, there is a discrepancy in the snow depths estimated from the 37-GHz (at both vertical and horizontal polarizations) and 85-GHz satellite measurements.

Wang, James R.↗

Galileo Direction Finding of Jovian Radio Emissions

The Galileo spacecraft, in orbit about Jupiter, has observed distinct spin modulation of plasma wave emissions near the Ganymede (G1 and G2) encounters in the frequency range from about 100 kHz to approximately 6 MHz. Assuming circularly polarized, transverse electromagnetic radiation, we have used the spin modulation of the sweep-frequency receivers of the electric dipole antenna over many spins to estimate the source location in the spin plane of the spacecraft. Hectometric (HOM) and decametric (DAM) emission is observed by Galileo as a general and continuous background with frequent bursts that last tens of minutes and can be separated by minutes or hours. We have analyzed HOM and DAM emissions observed near Jupiter just after the GI and G2 encounters, including two HOM/DAM "arc" signatures observed after the G2 encounter. These latter appear to be low-frequency extensions of DAM arcs, with source regions along either the Io or the Ganymede flux tube. While the uncertainties associated with the data analysis do not allow a precise source location, the HOM/DAM emission observed near the G1 and G2 encounters is consistent with a gyroresonant source region, but it is necessary to require refraction due to the Io torus to understand the results. To explain emission from apparent source regions above a gyroresonant source region, wave refraction from asymmetries in the Io plasma torus that extend along magnetic field lines is postulated. Alternatively, if such torus density asymmetries do not exist, emission with sources above a gyroresonant source region would require another free-energy source such as energetic plasma beams in the presence of density gradients or temperature anisotropies.

Menietti, J. D.↗

Impact of Jason-2/T2L2 Ultra-Stable-Oscillator Frequency Model on DORIS stations coordinates and Earth Orientation Parameters

Doppler Orbitography and Radiopositioning Integrated on Satellite (DORIS)is a tracking technique based on a one-way ground to space Doppler link.For Low Earth Orbit (LEO) satellites, DORIS shows a robust capability interms of data coverage and availability, due to a wide and well-distributedground network, where data are made available by the International DorisService (IDS). However, systematic errors remain in the DORIS data, suchas instabilities of the on-board clock due to radiation encountered in space,which limit the accurate determination of station positions.The DORIS on-board clock frequency stability is degraded by the increased radiation found in the region of the South Atlantic Anomaly (SAA)and has been shown to degrade station position estimation. This paper in-troduces a new model correction to the DORIS data for the frequency ofthe Jason-2 Ultra Stable Oscillator (USO), derived from the Time Transferby Laser Link (T2L2) experiment (Belli and Exertier, 2018). We show thata multi-satellite DORIS solution including this T2L2-corrected data appliedto the frequency modelling for The DORIS data, improves the estimationof station coordinates. We show the tie residuals with respect to collocatedGPS stations are improved by several millimeters. We also demonstratethat the 117-day (Jason-2) draconitic signal in the geophysical parametersis reduced, implying that the origin of this signal is not just solar radiationpressure mis-modeling, but also radiation-induced clock perturbations onthe Jason-2 DORIS Ultra-Stable-Oscillator (USO). Finally we demonstratethrough comparisons with the International Earth Rotations and ReferenceSystems Service (IERS) C04 series for Earth Orientation Parameters (EOP),that the estimation of EOP is improved in both a Jason-2 DORIS-only anda multi-satellite DORIS solution for EOP.

DORIS↗

The estimation of decay coefficient in pulsed transient data

The problem of estimation and interpretation of a decay coefficient in a pulsed transient signal is considered. Two methods are proposed in estimating the decay coefficient of pulsed decay transient data. The methods are derived through a spectral analysis for a parametric model of impulse response function of signal frequency. The several pulsed response data from T burner tests as well as some synthesized data are analyzed and the performance of the estimation procedures are examined. Suggestions for further research in this area are offered. The estimation procedures presented can be extended to the case of multiple frequencies in pulse response function and time dependent decay or growth coefficients.

Park, T. W.↗

A Method of Moments Wide Band Adaptive Rational Interpolation Method for High-Quality Factor Resonant Cavities

A new adaptive rational interpolation method is proposed to obtain the wideband frequency response of a resonant cavity simulated with the method of moments (MoM). This interpolation method uses both the Loewner matrix to construct a rational expression for the solution vector of MoM’s matrix system and an error estimator generated by the solution vectors and their derivatives. This error estimator is implemented in the adaptive procedure to gain a minimum set of frequencies and solution vectors required in the interpolation. The resulting set of frequencies and solution vectors is applied to interpolate other system variables, such as shielding effectiveness and input impedance. Here numerical results of a slotted cylindrical cavity supporting high-quality factor resonances are presented, showing that the new rational interpolation method is accurate and efficient in interpolating the complicated resonant response of the solution vector functions.

42 ENGINEERING↗

Multisensor comparison of ice concentration estimates in the marginal ice zone

Aircraft remote sensing data collected during the 1984 summer Marginal Ice Zone Experiment in the Fram Strait are used to compare ice concentration estimates derived from synthetic aperture radar (SAR) imagery, passive microwave imagery at several frequencies, aerial photography, and spectral photometer data. The comparison is carried out not only to evaluate SAR performance against more established techniques but also to investigate how ice surface conditions, imaging geometry, and choice of algorithm parameters affect estimates made by each sensor.Active and passive microwave sensor estimates of ice concentration derived using similar algorithms show an rms difference of 13 percent. Agreement between each microwave sensor and near-simultaneous aerial photography is approximately the same (14 percent). The availability of high-resolution microwave imagery makes it possible to ascribe the discrepancies in the concentration estimates to variations in ice surface signatures in the scene.

Burns, B. A.↗