Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “entropy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Synthesis and microstructure characterization of Ni-Cr-Co-Ti-V-Al high entropy alloy coating on Ti-6Al-4V substrate by laser surface alloying

Ni-Cr-Co-Ti-V-Al high-entropy alloy coating on Ti-6Al-4V was synthesized by laser surface alloying. The coating is composed of a B2 matrix and (Co, Ni)Ti{sub 2} compounds with few β-Ti phases. Focused ion beam technique was utilized to prepare TEM sample and TEM observations agree well with XRD and SEM results. The formation of HEA phases is due to high temperature and rapid cooling rate during laser surface alloying. The thermodynamic parameters, ΔH{sub mix}, ΔS{sub mix}and δ as well as Δχ, should be used to predict the formation of the BCC solid solution, but they are not the strict criteria. Especially when Δχ reaches a high value (≥ 10%), BCC HEA will be partially decomposed, leading to the formation of (Co, Ni)Ti{sub 2} compound phases. - Highlights: •Preparing HEA coating on Ti-6Al-4V by laser surface alloying is successful. •The synthesized HEA coating mainly consists of BCC HEA and (Co, Ni)Ti{sub 2} compounds. •FIB technology was used to prepare the sample for TEM analysis. • ΔH{sub mix}, ΔS{sub mix}and δ as well as Δχ, should be all used to predict the formation of solid solution.

36 MATERIALS SCIENCE↗

Influence of strain on the formation of cold-rolling and grain growth textures of an equiatomic HfZrTiTaNb refractory high entropy alloy

Highlights: • Effect of strain on Texture formation is reported in HfZrTiTaNb for the first time. • Cold-rolled microstructure shows high density of deformation heterogeneities. • Weak texture compared to other BCC phases in HEAs • Imposed strain does not affect texture significantly unlike other BCC materials. - Abstract: The effect of cold-rolling strain on the evolution of deformation and grain growth textures in an equiatomic HfZrTiTaNb refractory high entropy alloy (RHEA) was investigated. For this purpose, the development of microstructure and texture was compared in 50% and 90% cold-rolled materials. The development of deformation microstructure was accompanied by the formation of extensive deformation heterogeneities. The 90% cold-rolled material showed ultrafine lamellar regions as well as regions severely fragmented by the fine scale deformation heterogeneities. The 50% cold-rolled material showed dominant ND-fiber (ND//), while the 90% cold-rolled material showed presence of both RD (RD//) and ND-fiber components. Profuse deformation heterogeneities presumably weakened the deformation texture considerably. The annealing texture of the 50% and 90% cold-rolled material showed stronger {111} component. Comparison of the annealing texture of the 50% and 90% cold-rolled materials with other BCC HEA phases indicated much weaker texture. The annealing texture of the RHEA was not significantly strengthened by increasing cold-rolling strain, presumably due to the high density of deformation heterogeneities in the cold-rolled microstructure. Thus, deformation heterogeneities significantly influenced the formation of cold-rolling and annealing textures of the equiatomic HfZrTiTaNb RHEA.

36 MATERIALS SCIENCE↗

Phase transformations in body-centered cubic NbxHfZrTi high-entropy alloys

Highlights: • BCC phase stability and phase transformations of NbxHfZrTi HEAs were investigated. • Three types of phase transformations: β → ω, β → α″ and β → α′ in HEAs were observed. • The athermal ω phase in Nb{sub 0.2}HfZrTi HEA leads to a much higher yield strength. • The reversible β → α″ in Nb{sub 0.4}HfZrTi HEA results in a narrow cyclic hysteresis loop. • A sluggish effect of martensitic transformations in complex HEAs is revealed. - Abstract: The stability of body-centered cubic (β) phases and phase transformations of NbxHfZrTi (x = 1, 0.6, 0.4 and 0.2) high-entropy alloys (HEAs) were investigated. Three types of transformations were observed: the β → ω transformation during cooling in Nb0.2 HEA, the deformation-induced β → α″ and β → α′ transformations in Nb0.4 and Nb0.2 HEAs, respectively. This implies that the phonon anomalies, T{sub 1}1/2(110) and L2/3(111), as the origins of phase transformations in simple Ti, Zr and Hf alloys, also exist in composition-complex TiZrHf-based HEAs. However, the very small fraction of deformation-induced α′/α″ martensite in fractured Nb0.4 and Nb0.2 suggests a sluggish effect of transformation as compared with simple β-Ti alloys.

36 MATERIALS SCIENCE↗

Nanosized precipitates and dislocation networks reinforced C-containing CoCrFeNi high-entropy alloy fabricated by selective laser melting

Highlights: • The SML C-containing CoCrFeNi HEA presents cellular and columnar subgrain structures. • The subgrain boundaries are made of dislocation networks with elements segregations. • The nanosized carbides distribute at grain boundary and subgrain boundaries. • The unique structure of the SLM HEA results in an outstanding yield strength. - Abstract: In this paper, we report a selective laser melted C-containing CoCrFeNi high-entropy alloy (HEA) with unique cellular and columnar subgrain structures. The subgrain boundaries are made of dislocation networks decorated by the segregation of Cr element and nanosized M{sub 23}C{sub 6}-type carbides. Structural characterization of dislocations and dislocation reactions in dislocation networks was conducted using high-resolution transmission electron microscopy. The high strength of the C-containing HEA is attributed to dislocation networks strengthening and nanosized carbides strengthening. These findings can provide a guidance for developing HEAs with superior mechanical properties, particularly high strength.

36 MATERIALS SCIENCE↗

Friction stir welding of a carbon-doped CoCrFeNiMn high-entropy alloy

Highlights: • Friction stir welding of a CoCrFeNiMn HEA doped with C was successfully obtained. • M{sub 23}C{sub 6} carbides with d≈150 nm form in the HEA due to addition of 0.9 at.% C. • Friction stir welding resulted in a decrease in grain size from 9.2 μm to 4.6 μm. • Smaller grain size and increased fraction of M{sub 23}C{sub 6} increase strength by 84 MPa. - Abstract: Butt-joint seam of a high entropy alloy (HEA) of the CoCrFeNiMn system was successfully obtained by friction stir welding (FSW). The HEA was produced by self-propagating high-temperature synthesis. Along with the principal elements, a small amount (0.9 at.%) of C was added to the alloy. The as-cast alloy was cold rolled and annealed at 900 °C to produce refined microstructure. The structure of the annealed alloy consisted of a recrystallized face-centered cubic matrix with a grain size of 9.2 μm and fine Cr-rich M{sub 23}C{sub 6} carbides. FSW of the HEA resulted in microstructure refinement to d = 4.6 μm in the stir zone. A noticeable rise in strength and some decrease in ductility of the processed alloy in comparison with the initial condition can be associated with the microstructure refinement and some increase in the volume fraction of M{sub 23}C{sub 6} carbides.

36 MATERIALS SCIENCE↗

Enhanced mechanical properties of carbon-doped FeNiMnAlCr high entropy alloy via hot-rolling

This work demonstrates an improvement in the mechanical performance of the high entropy alloy Fe 40.4 Ni 11.3 Mn 34.8 Al 7.5 Cr 6 containing 1.1 at. % carbon (CHEA) by hot-rolling followed by annealing at 1323 K. The microstructure was examined using scanning electron microscopy, electron backscatter diffraction, X-ray diffraction, and transmission electron microscopy. Room-temperature tensile tests were used to assess the alloy's mechanical properties. The presence of dense dislocation walls indicate that the alloy has not fully recrystallized and, moreover, the deformation substructure and the large fraction of Σ3 twin boundaries contribute to the high room temperature yield strength (~523 MPa). Despite the presence of substantial dislocation density, the annealed, hot-rolled CHEA displays an improvement in elongation to fracture (~33%) compared to the negligible ductility (< 2%) observed for the alloy after it has been simply annealed. Finally, the present work shows that hot rolling can produce good strength and ductility in the alloy while establishing the processing conditions necessary for the large-scale manufacture and utilization of its remarkable properties.

36 MATERIALS SCIENCE↗

Development and characterization of a low-density TiNbZrAlTa refractory high entropy alloy with enhanced compressive strength and plasticity

A new refractory high entropy alloy (RHEA) is designed by combining refractory elements Nb and Ta with Ti, Zr, and Al, resulting in a (TiNbZr) 89 (AlTa) 11 alloy composition with a low-density of 6.0 g/cm 3 . The novel RHEA features a BCC matrix with B2 and Zr 5 Al 3 nano precipitates, exhibiting a compressive yield strength of ~890 MPa and specific yield strength of ~148.3 MPa g -1 cm 3 . Remarkably, the alloy demonstrates excellent compressive plasticity of ~70% at 298 K. As the temperature increases to 873 K, 1073 K, and 1273 K, the yield strength of the RHEA gradually decreases to ~610 MPa, ~ 210 MPa, and ~ 60 MPa, respectively. These results indicate that this novel RHEA showcases a combination of good specific strength and plasticity. Post-compression, B2, and Zr 5 Al 3 phases are observed. In conclusion, the second-phase particles dispersed throughout the grains hinder dislocation motion and contribute to the formation of sub-grain boundaries during hot compression.

36 MATERIALS SCIENCE↗

The influence of chemical short-range order on the nanoindentation properties of high-entropy alloys prepared via laser powder bed fusion

Chemical short-range order (CSRO) plays an instrumental role in determining the mechanical properties of high-entropy alloys (HEAs). Current methods for controlling CSRO mainly focus on cast HEAs, which can not solve the problem of grain coarsening caused by homogenization treatments. Laser Powder Bed Fusion (LPBF), which has extremely high cooling rates, can suppress compositional segregation, refine grain structures, and achieve low CSRO. This offers a promising avenue for quantitatively controlling CSRO without the need for homogenization treatments. In this study, we investigate the CSRO of HEAs fabricated via LPBF and elucidate their influence on nanoindentation behavior. The results show that, at the low cooling rate, the average size of CSRO is 0.66 nm and they occupy 2.8% of the cross-sectional area, while at high cooling rate, the corresponding values are 0.92 nm and 9.9%, respectively, both of which are significantly smaller than those of cast HEAs. Furthermore, by analyzing samples with different CSROs, we observe that the hardness increases and then decreases with the increase of CSRO, primarily due to the preferential formation of dislocations in regions enriched with Cr-Mn-Ni. With the improvement of CSRO, both the size and quantity of Cr-Mn-Ni rich region gradually increased; subsequently, as multiple Cr-Mn-Ni rich regions tend to merge into one during the CSRO improvement, the size of the Cr-Mn-Ni rich region continued to increase while the quantity gradually decreased; when the size of the Cr-Mn-Ni rich region is moderate and widely dispersed, the dislocation density is higher with much more uniform distributions, which favorably improves nanoindentation hardness.

36 MATERIALS SCIENCE↗

From phase decomposition to evaporation: A multi-modal evaluation of thermally degraded model lightweight high-entropy alloy

Lightweight high-entropy alloys (LHEAs) have the potential to replace conventional lightweight materials due to their superior mechanical properties and thermal stability. However, the thermal degradation pattern of LHEAs from phase decomposition to evaporation is not clear. We develop a new Al-based dual phase (FCC + HCP) LHEA—AlTi 0.45 CuZn, and further investigate its thermal degradation behavior for potential high-temperature structural applications. Using multimodal advanced characterization techniques such as differential scanning calorimetry/thermogravimetric analysis, scanning/transmission electron microscopy, and synchrotron X-ray diffraction/pair distribution function (XRD/PDF), a sequence of thermal degradation events beyond the thermal phase stability limit—between 250 and 360 °C—is observed. These include phase decomposition at ~360 °C, Zn evaporation at ~750 °C, and LHEA melting at 880 °C which results in ~25% cumulative weight loss. The formation of Al-Ti phase off the AlTi 0.45 CuZn matrix is due to the largest negative mixing enthalpy for Al-Ti than other binary pairs. Similarly, Zn evaporation from AlTi 0.45 CuZn LHEA is due to its faster evaporation rate than other constituent elements. The high-resolution synchrotron XRD and PDF results support the aforementioned observations; in addition, they reveal local atomic arrangements, local strain, and sluggish grain growth in the LHEA. Among other LHEAs of close density range (5.55 ≤ ρ ≤ 5.85 g/cc), the investigated LHEA exhibits outstanding nano-indentation hardness values due to the coupled grain size effect and HCP phase strengthening of the FCC matrix. As the search for LHEAs for lightweight applications grows, this study shows the potential use of AlTi 0.45 CuZn LHEA for structural applications even at elevated temperatures.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Abnormal temperature dependence of impact toughness in Al x CoCrFeNi system high entropy alloys

The effect of Al contents and the associated phase transformations on the impact toughness of Al x CoCrFeNi high-entropy alloys (HEAs) (x denotes Al molar ratio; x = 0, 0.1, 0.75, and 1.5) in the as-cast state were investigated at T = 77 K, 200 K, and 298 K. For the alloys with x = 0 and 0.1, the alloys have the FCC structure, and an inverse temperature dependence of impact toughness between 298 K and 77 K was observed. The enhanced impact toughness (397.87 J) at 77 K is attributed to the capability of extensive nano-twinnings as well as ductile dimple fracture. Increasing Al contents to x = 0.75 and 1.5 induces the formation of brittle BCC phase and ordered B2 compound and accordingly embrittlement, leading to tremendously reduced Charpy-impact energies. Finally, the present study demonstrates that FCC Al x CoCrFeNi system HEAs with low Al contents (x < 0.5) may be well suitable for cryogenic applications.

36 MATERIALS SCIENCE↗

Solid state amorphization of metastable Al 0.5 TiZrPdCuNi high entropy alloy investigated by high voltage electron microscopy

Here, the phase stability of high entropy alloy (HEA), Al 0.5 TiZrPdCuNi, under fast electron irradiation was studied by in-situ high voltage electron microscopy (HVEM). The initial phase of this alloy quenched from the melt was dependent on cooling rate. At high cooling rates an amorphous phase was obtained, whereas a body-centered cubic ( b.c.c. ) phase were obtained at low cooling rates. By thermal crystallization of the amorphous phase b.c.c. phase nano-crystals were formed. Upon fast electron irradiation solid state amorphization (SSA) was observed in b.c.c. phase regardless of the initial microstructure (i.e., “coarse crystalline structure” or “nano-crystalline structure with grain boundaries as a sink for point defects”). SSA behavior in the Al 0.5 TiZrPdCuNi HEAs was investigated by in-situ transmission electron microscopy observations. Because the amorphization is very rarely achieved in a solid solution phase under fast electron irradiation in common metallic materials, this result suggests that the Al 0.5 TiZrPdCuNi HEA from other common alloys and the other HEAs. The differences in phase stability against the irradiation between the Al 0.5 TiZrPdCuNi HEA and the other HEAs were discussed. This is the first experimental evidence of SSA in HEAs stimulated by fast electron irradiation.

36 MATERIALS SCIENCE↗

Temperature effects on the serrated behavior of an Al 0.5 CoCrCuFeNi high-entropy alloy

Compression experiments of the Al 0.5 CoCrCuFeNi high-entropy alloy (HEA) under displacement control were conducted at different temperatures ranging from 673 K to 873 K with a low strain rate of 2 x 10 -4 /s to study its serration behavior. Samples after compression tests were investigated, using the synchrontron-diffraction technique and transmission-electron microscopy. By comparing the stress-strain curves at different temperatures, two opposite directions of serrations were observed, named the upward serration appearing at 573 K and 673 K and the downward serration at 773 K and 873 K. The different directions of serrations were discussed in terms of not only the relationships among the stress vs. strain, stress vs. time, and strain vs. time, but also the interactions among dislocations, atoms, and nanoparticles. Lastly, the temperature effect on the flow serration is discussed by referring to a theoretical framework for the initiation of the serrated flow. Beyond a critical high temperature, the initiation of the serrated flow becomes swiftly difficult, and ultimately the plastic flow in the full deformation range turns smooth. Such a theoretical prediction of normal behavior is essentially in qualitative agreement with the experimental observation in the present work, i.e., the critical strain to intiate the serration decreases, with the increasing temperature.

36 MATERIALS SCIENCE↗

Improved creep performance of CoCrFeNi high entropy alloys by Mo addition

The CoCrFeNi family of high entropy alloys has good mechanical and corrosion properties, performing like stainless steels with low yield stresses. They could, however, benefit from hardening methods for structural and high temperature applications. Here, this work investigates the potential for the CoCrFeNi alloy to be hardened with the addition of Mo. A series of CoCrFeNiMo alloys and their CoCrFeNi counterparts were subsequently manufactured at NETL and then mechanically creep tested at 650°C. The alloys were designed to possess a range of stacking fault energies which influence the mechanical properties of the alloys via the motion of their dislocations under stress. Results show that Mo-containing variants have creep rupture lives ranging from 4000 to 8000 hours, i.e., about two orders of magnitude longer than those for Mo-free variants. The significantly improved creep performance of the Mo-containing alloys is due to a combination of solid solution strengthening and precipitation strengthening from µ-phase and carbides.

36 MATERIALS SCIENCE↗

Understanding phase stability of Al-Co-Cr-Fe-Ni high entropy alloys

The concept of high entropy alloy (HEA) opens a vast unexplored composition range for alloy design. As a well-studied system, Al-Co-Cr-Fe-Ni has attracted tremendous amount of attention to develop new-generation low-density structural materials for automobile and aerospace applications. In spite of intensive investigations in the past few years, the phase stability within this HEA system is still poorly understood and needs to be clarified, which poses obstacles to the discovery of promising Al-Co-Cr-Fe-Ni HEAs. In the present work, the CALPHAD approach is employed to understand the phase stability and explore the phase transformation within the Al-Co-Cr-Fe-Ni system. As a result, the phase-stability mapping coupled with density contours is then constructed within the composition - temperature space, which provides useful guidelines for the design of low-density Al-Co-Cr-Fe-Ni HEAs with desirable properties.

36 MATERIALS SCIENCE↗

Nanoindentation testing as a powerful screening tool for assessing phase stability of nanocrystalline high-entropy alloys

The equiatomic high-entropy alloy (HEA), CrMnFeCoNi, has recently been shown to be microstructurally unstable, resulting in a multi-phase microstructure after intermediate-temperature annealing treatments. The decomposition occurs rapidly in the nanocrystalline (NC) state and after longer annealing times in coarse-grained states. To characterize the mechanical properties of differently annealed NC states containing multiple phases, nanoindentation was used in this paper. The results revealed besides drastic changes in hardness, also for the first time significant changes in the Young's modulus and strain rate sensitivity. Finally, nanoindentation of NC HEAs is, therefore, a useful complementary screening tool with high potential as a high throughput approach to detect phase decomposition, which can also be used to qualitatively predict the long-term stability of single-phase HEAs.

36 MATERIALS SCIENCE↗

Microstructure, mechanical and corrosion behaviors of AlCoCuFeNi-(Cr,Ti) high entropy alloys

The equimolar AlCoCuFeNi-(Cr,Ti) high entropy alloys (HEAs) were synthesized by nonconsumable arc melting to investigate the effects of Cr and Ti on the mechanical and corrosion properties of HEAs. The results showed that as-cast AlCoCuFeNi-(Cr,Ti) HEAs have a multi-phase microstructure, of which the solid-solution face-centered cubic (FCC), body-centered cubic (BCC) phases, and intermetallics can be observed. Ab initio molecular-dynamics (AIMD) simulations exhibit the existence of the preferred short-range ordering of Al-Ni, Co-Cr, Cr-Fe, and Ti-Co pairs in the AlCoCuFeNiCrTi liquid structure. The AIMD simulations are consistent with the experimental observation during solidification. The segregations and the FCC Cu-rich phase appear in the AlCoCuFeNiCrTi alloy, which is in agreement with AIMD calculations. The Cr addition to AlCoCuFeNi facilitates the formation of the BCC phases in the AlCoCuFeNiCr alloy, which can be explained by the larger Ω and smaller δ values. The addition of large Ti atoms facilitates the formation of the FCC phase, which is due to the fact that Ti will easily induce the breakdown of the BCC solid-solution of the AlCoCuFeNi alloy in terms of decreasing the Ω value and increasing the δ value. Finally, the Cr addition improves the corrosion resistance of AlCoCuFeNi alloys.

36 MATERIALS SCIENCE↗

A new strategy to design eutectic high-entropy alloys using simple mixture method

Eutectic high entropy alloys (EHEAs) hold promising industrial application potential, but how to design EHEA compositions remains challenging. In the present work, a simple and effective strategy by combining mixing enthalpy and constituent binary eutectic compositions was proposed to design EHEA compositions. This strategy was then applied to a series of (CoCrFeNi)M x (M = Nb, Ta, Zr, Hf) HEAs, leading to the discovery of new EHEAs, namely, CoCrFeNiNb 0.45 , CoCrFeNiTa 0.4 , CoCrFeNiZr 0.55 and CoCrFeNiHf 0.4 . The microstructure of these new EHEAs comprised of FCC and Laves phases in the as-cast state. In conclusion, the experimental result shows that this new alloy design strategy can be used to locate new EHEAs effectively.

36 MATERIALS SCIENCE↗

High-throughput synthesis and corrosion behavior of sputter-deposited nanocrystalline Al x (CoCrFeNi) 100-x combinatorial high-entropy alloys

High-entropy alloys (HEAs) are inherently complex and potentially span a vast composition space, making their research and discovery challenging. In the present study, high-throughput synthesis of an Al x (CoCrFeNi) 100-x combinatorial material library covering x = 4.5–40 atomic percent Al is achieved, using magnetron cosputtering. The effects of Al on the microstructure and corrosion behavior are investigated. With the increased amount of Al, crystal-structures of thin films transform from face-centered cubic (FCC) to body-centered cubic (BCC). Both the FCC and BCC thin films demonstrate a uniform elemental distribution. Corrosion characteristics of combinatorial samples immersed in the 3.5 wt% (wt%) NaCl solution are evaluated via electrochemical tests. Complementary X-ray photoelectron spectroscopy analysis reveals the compositional variation of passivated films formed on the sample surface after immersion. The results show that the Al x (CoCrFeNi) 100-x HEA thin films possess outstanding corrosion-resistant properties, but the resistance diminishes with the increasing Al content. The decreased corrosion resistance is revealed to be directly related to the constituents of passivated films.

36 MATERIALS SCIENCE↗