Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrolyte additives”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Evaluation of lithium alloy anode materials for Li-TiS2 cells

A study was performed to select candidate lithium alloy anode materials and establish selection criteria. Some of the selected alloy materials were evaluated for their electrochemical properties and performance. This paper describes the criteria for the selection of alloys and the findings of the studies. Li-Si and Li-Cd alloys have been found to be unstable in the EC+2-MeTHF-based electrolyte. The Li-Al alloy system was found to be promising among the alloy systems studied in view of its stability and reversibility. Unfortunately, the large volume changes of LiAl alloys during charge/discharge cycling cause considerable 'exfoliation' of its active mass. This paper also describes ways how to address this problem. The rate of disintegration of this anode would probably be surpressed by the presence of an inert solid solution or a uniform distribution of precipitates within the grains of the active mass. It was discovered that the addition of a small quantity of Mn may improve the mechanical properties of LiAl. In an attempt to reduce the Li-Al alloy vs. Li voltage, it was observed that LiAlPb(0.1)Cd(0.3) material can be cycled at 1.5 mA/sq cm without exfoliation of the active mass.

Huang, C.-K.↗
DOE OSTI2023

Utilizing Conjugated Imine Polymers to Stabilize Nanoparticle Silicon Anodes

Silicon anodes provide a compelling route towards delivering high-capacity lithium-ion batteries, however they are notoriously difficult to stabilize in conventional liquid electrolytes that are compatible with high performance cathodes. Furthermore, the drastic changes in volume that occur as silicon is lithiated and delithiated can lead to rapid cell failure and novel polymeric binders are known to help mitigate mechanical issues. We have recently developed a novel method to synthesize the conjugated polymer phenylmethylimine (polyPMI) using an imine metathesis reaction. We have demonstrated that this polymer can be used to stabilize silicon nanoparticles to produce a composite lithium-ion battery anode that is electrochemically stable for hundreds of lithiation and delithiation cycles with a Coulombic efficiency that is greater than 99.95% in a traditional carbonate liquid electrolyte. This work covers the structure and properties of polyPMI within the context of the unique mechanical and electrochemical requirements of nanoparticle silicon anodes. The electrochemical behavior of this polymer also offers new opportunities as an organic lithium-coordinating material that can be used to stabilize a variety of other battery electrodes. More broadly, we posit that this solution-processed, ionically conductive, and electronically conductive polymer is applicable for a variety of energy storage and conversion technologies. Finally, this work demonstrates how this novel polymer chemistry provides additional opportunities for tuning electrode architecture to target high energy full cells.

conjugated polymers↗
DOE OSTI2025

Investigating the effect of screen-printed structured graphite electrodes with low tortuosity for high-capacity and fast-charging lithium-ion batteries

A flexible screen-printed graphite electrode was fabricated as an anode for developing fast-charging lithium-ion batteries with low tortuosity. A homogenous anode ink was prepared by mixing graphite as the active material, carbon black (C45) as the conductive additive, and polyvinylidene fluoride (PVDF) as the binder in N-Methyl-2-pyrrolidone (NMP) solvent. The ink was deposited on a flexible copper foil via a stainless-steel screen consisting of an array of pores, that act as secondary pore networks (SPNs), using the screen-printing process. Lithium-ion battery half-cells were assembled using the printed graphite anode, lithium metal foil as the counter electrode, and 1.2 M lithium hexafluorophosphate (LiPF 6 ) in ethyl carbonate: ethyl methyl carbonate (EC: EMC = 3:7) as the electrolyte. The effect of SPNs on the cell performance was investigated by performing formation, rate and cycling tests on the assembled cells, at different C-rates. It was observed that the cells consisting of SPNs with a pore size of 100 μm and edge-to-edge distance of 100 μm between the pores exhibited significantly higher specific capacities of 168 and 129 mAh/g when compared to reference cells without SPNs, which had capacities of 120 and 85 mAh/g, at high C-rates of 4 C and 6 C, respectively. The cells with SPNs also demonstrated excellent cycling performance with ~ 95% capacity retention after 100 cycles at 2 C.

Fast charging lithium-ion battery↗
DOE OSTI2025

Is the Chemisorbed CO 2 in Ionic Liquid Electrolytes Active for Electrochemical Utilization? A Case Study on Carboxylate and Carbamate Speciation

This study examines the activity of chemisorbed CO 2 species in the microenvironment formed by bifunctional ionic liquids (ILs) in the reactive capture and conversion (RCC) of CO 2 to CO on silver. Comparative electroanalytical measurements with imidazolium based ILs were performed to probe the impact of electrostatic interactions, anion and cation basicity, and hydrogen bonding on RCC. Particularly, ILs with 1-ethyl-3-methylimidazolium ([EMIM]+) and 1-ethyl-2,3-dimethylimidazolium ([EMMIM]+) cations and aprotic heterocyclic anions of 2-cyanopyrrolide ([2-CNpyr]) and 1,2,4-triazolide ([124-Triz]) were examined for RCC. It was found that anion–CO 2 carbamate complexes facilitate RCC at significantly lower overpotentials compared to cation–CO 2 carboxylate complexes. Additionally, [EMIM]+ was found to better stabilize anion–CO 2 complexes at the interface than [EMMIM]+. Furthermore, it was found that 2-CNpyrH that naturally forms during CO 2 absorption competes for electrode surface adsorption with the anion–CO 2 carbamate complex, thereby reducing the electrochemical activity of the anion–CO 2 complex. These results highlight the importance of IL structure in tuning the interfacial interactions and suggest that ILs with anion-dominated CO 2 chemisorption enhances CO 2 utilization in RCC applications.

Coskun, Oguz Kagan [Case Western Reserve Univ., Cl↗
NASA NTRS1996

Low Crossover Polymer Electrolyte Membranes for Direct Methanol Fuel Cells

Direct Methanol Fuel Cells (DMFC's) using polymer electrolyte membranes are promising power sources for portable and vehicular applications. State of the art technology using Nafion(R) 117 membranes (Dupont) are limited by high methanol permeability and cost, resulting in reduced fuel cell efficiencies and impractical commercialization. Therefore, much research in the fuel cell field is focused on the preparation and testing of low crossover and cost efficient polymer electrolyte membranes. The University of Southern California in cooperation with the Jet Propulsion Laboratory is focused on development of such materials. Interpenetrating polymer networks are an effective method used to blend polymer systems without forming chemical links. They provide the ability to modify physical and chemical properties of polymers by optimizing blend compositions. We have developed a novel interpenetrating polymer network based on poly (vinyl - difluoride)/cross-linked polystyrenesulfonic acid polymer composites (PVDF PSSA). Sulfonation of polystyrene accounts for protonic conductivity while the non-polar, PVDF backbone provides structural integrity in addition to methanol rejection. Precursor materials were prepared and analyzed to characterize membrane crystallinity, stability and degree of interpenetration. USC JPL PVDF-PSSA membranes were also characterized to determine methanol permeability, protonic conductivity and sulfur distribution. Membranes were fabricated into membrane electrode assemblies (MEA) and tested for single cell performance. Tests include cell performance over a wide range of temperatures (20 C - 90 C) and cathode conditions (ambient Air/O2). Methanol crossover values are measured in situ using an in-line CO2 analyzer.

Prakash, G. K. Surya↗
DOE OSTI2021

Status and prospect of in situ and operando characterization of solid-state batteries

Electrification of the transportation sector relies on radical re-imagining of energy storage technologies to provide affordable, high energy density, durable and safe systems. Next generation energy storage systems will need to leverage high energy density anodes and high voltage cathodes to achieve the required performance metrics (longer vehicle range, long life, production costs, safety). Solid-state batteries (SSBs) are promising materials technology for achieving these metrics by enabling these electrode systems due to the underlying material properties of the solid electrolyte (viz. mechanical strength, electrochemical stability, ionic conductivity). Electro-chemo-mechanical degradation in SSBs detrimentally impact the Coulombic efficiencies, capacity retention, durability and safety in SSBs restricting their practical implementation. Solid|solid interfaces in SSBs are hot-spots of dynamics that contribute to the degradation of SSBs. Characterizing and understanding the processes at the solid|solid interfaces in SSBs is crucial towards designing of resilient, durable, high energy density SSBs. This work provides a comprehensive and critical summary of the SSB characterization with a focus on in situ and operando studies. Additionally, perspectives on experimental design, emerging characterization techniques and data analysis methods are provided. Furthermore, this work provides a thorough analysis of current status of SSB characterization as well as highlights important avenues for future work.

25 ENERGY STORAGE↗
DOE OSTI2025

Automatic Generation of Chemical Mechanisms for Electrochemical Systems: Solid Electrolyte Interphase Formation in Lithium Batteries

Electrolytes in many lithium ion batteries decompose at the low potentials near the anode. The decomposition products form a layer termed the solid electrolyte interphase (SEI). The composition and growth of the SEI layer significantly affect both the capacity fade and safety of lithium ion batteries. However, SEI formation and growth kinetics are not well understood. In this work, we present an extension of the Reaction Mechanism Generator (RMG) software to automatically generate mechanisms for SEI formation. We extend RMG’s solvation correction framework to account for kinetic solvent effects and demonstrate the accuracy of our technique. We calculate thermochemical parameters for 252 species and rate coefficients for 69 reactions, most with associated solvation corrections. This and additional quantum chemistry data are used to extend RMG’s thermodynamic group additivity and solute parameter estimation schemes to handle lithiated species and add 14 new reaction families to RMG. RMG is additionally extended to simulate electrocatalytic systems. Lastly, we demonstrate RMG on the decomposition of acetonitrile and ethylene carbonate near a battery anode. Furthermore, while this framework does not yet resolve individual ions, as appropriate thermochemistry estimators are not available, and thus, cannot yet resolve more complex electrochemical pathways, RMG is able to generate reasonable pathways for SEI formation that match literature pathways and products. In particular, RMG identifies a new important reaction pathway that is not present in literature.

Chemical reactions↗
NASA NTRS1997

Clinical utility of T-wave alternans

Electrical alternans represents a variation in the morphology of electrocardiographic complexes on an every-other-beat basis in an ABABAB... pattern. Apparent electrical alternans associated with pericardial effusion results from rotation of the heart in the pericardial sac, and not true alternation in electrical conduction patterns. In contrast, true electrical alternans results from an alternation in electrical conduction patterns in the heart itself. Repolarization alternans is true electrical alternans associated with the ST segment and T wave of the electrocardiogram (ECG). Here we will focus on T-wave alternans (TWA) and its association with susceptibility to ventricular tachyarrhythmias. Electrical alternans was reported in the literature as early as 1909. Historically, electrical alternans has been regarded as a fairly rare electrocardiographic abnormality. Case reports of electrical alternans have been associated with a variety of disease states, including acute ischemia, Prinzmetal's angina, a variety of electrolyte abnormalities, and the long QT syndrome. Interestingly, patients born with the prolonged QT syndrome have a very high incidence of sudden cardiac death at an early age. Schwartz and Malliani showed that patients with the prolonged QT syndrome who do not demonstrate alternans at rest, may evidence alternans during stress such as emotional excitement. Thus, over the years electrical alternans has been associated anecdotally with conditions associated with an increased risk of ventricular arrhythmias. In 1948, Kalter reviewed the world literature on electrical alternans and found a total of 41 reported cases. In addition, he reviewed clinical ectrocardiograms from 6059 patients and found five new cases (incidence of less than 1 in 1000 patients). Interestingly, he found a very high mortality, 62%, associated with this condition. Despite the clinical associations reported in the literature, the consensus view of electrical alternans until recent years has been that alternans is an electrocardiographic curiosity rarely encountered in clinical practice which, when identified, does not have specific clinical significance.

Review, Tutorial↗
DOE OSTI2023

Intercalation-type catalyst for non-aqueous room temperature sodium-sulfur batteries

Abstract Ambient-temperature sodium-sulfur (Na-S) batteries are potential attractive alternatives to lithium-ion batteries owing to their high theoretical specific energy of 1,274 Wh kg −1 based on the mass of Na 2 S and abundant sulfur resources. However, their practical viability is impeded by sodium polysulfide shuttling. Here, we report an intercalation-conversion hybrid positive electrode material by coupling the intercalation-type catalyst, MoTe 2 , with the conversion-type active material, sulfur. In addition, MoTe 2 nanosheets vertically grown on graphene flakes offer abundant active catalytic sites, further boosting the catalytic activity for sulfur redox. When used as a composite positive electrode and assembled in a coin cell with excess Na, a discharge capacity of 1,081 mA h g s −1 based on the mass of S with a capacity fade rate of 0.05% per cycle over 350 cycles at 0.1 C rate in a voltage range of 0.8 to 2.8 V is realized under a high sulfur loading of 3.5 mg cm −2 and a lean electrolyte condition with an electrolyte-to-sulfur ratio of 7 μL mg −1 . A fundamental understanding of the electrocatalysis of MoTe 2 is further revealed by in-situ synchrotron-based operando X-ray diffraction and ex-situ time-of-flight secondary ion mass spectrometry.

25 ENERGY STORAGE↗
DOE OSTI2025

Stable, Efficient Iron Electrodeposition via Anion-Directed Control of Fe(II) Coordination

Traditional steelmaking processes consume about 7% of the world’s energy supply, with reduction of iron oxides into iron via blast furnaces representing the most energy-demanding and capital-intensive step. To economize and modularize iron reduction processes, we aim to develop an electrodeposition technique to reduce aqueous iron ions to metallic iron. However, the hydrogen reduction reaction (HER) occurs at a more positive standard reduction potential than the iron reduction reaction. In addition, aqueous Fe(II) cations easily precipitate at mildly acidic conditions (pH ≥ 3), which limits the deposition efficiency and degrades deposit quality. To address these challenges, we first search for anions that have intermediate coordination strength with Fe(II) based on the hard-soft acid-base theory, trading a slightly more negative Fe(II) reduction potential for a considerably broader pH stability range. We select citrate with predicted intermediate coordination strength, in combination with more weakly coordinating anions (e.g., SO 4 2- , Cl - ) to control the coordination structure of Fe 2+ for improved electrolyte stability and electrodeposition behavior. We find that citrate coordination stabilizes Fe 2+ -based electrolytes at higher pH conditions (4.8–5.5), significantly extending their shelf life while also suppressing HER during Fe electrodeposition by orders of magnitude. To measure Faradaic efficiencies (FE), we developed a straightforward, titration-based methodology to quantify the amount of deposited iron regardless of the rate of concurrent HER. Although coordination between citrate and Fe 2+ decreases the reduction potential of Fe(II), high FE (≥98%) was achieved at 10 mA cm -2 . FE and achievable deposition rates are tunable by both concentration and the ratio of Fe 2+ to citrate. In all cases, Raman spectroscopy and X-ray diffraction (XRD) reveal that iron deposition in citrate-containing electrolytes suppresses iron oxide/hydroxide precipitation, in contrast to deposits generated in citrate-free electrolytes. Altogether, this work demonstrates that citrate-mediated anion coordination enables high-purity iron electrodeposition with increased FE, high current density, and improved electrolyte stability. This multi-anion coordination strategy provides a versatile framework for designing stable electrolyte and efficient metal electrodeposition.

coordination↗
NASA NTRS1992

Space sickness predictors suggest fluid shift involvement and possible countermeasures

Preflight data from 64 first time Shuttle crew members were examined retrospectively to predict space sickness severity (NONE, MILD, MODERATE, or SEVERE) by discriminant analysis. From 9 input variables relating to fluid, electrolyte, and cardiovascular status, 8 variables were chosen by discriminant analysis that correctly predicted space sickness severity with 59 pct. success by one method of cross validation on the original sample and 67 pct. by another method. The 8 variables in order of their importance for predicting space sickness severity are sitting systolic blood pressure, serum uric acid, calculated blood volume, serum phosphate, urine osmolality, environmental temperature at the launch site, red cell count, and serum chloride. These results suggest the presence of predisposing physiologic factors to space sickness that implicate a fluid shift etiology. Addition of a 10th input variable, hours spent in the Weightless Environment Training Facility (WETF), improved the prediction of space sickness severity to 66 pct. success by the first method of cross validation on the original sample and to 71 pct. by the second method. The data suggest that WETF training may reduce space sickness severity.

Simanonok, K. E.↗
DOE OSTI2022

Multicycle flash sintering of cubic Y 2 O 3 -stabilized ZrO 2 : An in situ energy dispersive synchrotron x-ray diffraction study with high temporal resolution

The current induced unit cell volume changes, (111) Bragg peak full width at half maximum (FWHM) and its integrated intensity in 8 % Y 2 O 3 stabilized ZrO 2 (8 %YSZ) solid state electrolyte was monitored during a triple-flash sintering experiment by in situ energy dispersive x-ray diffraction using a polychromatic synchrotron probe (max, photon energy 200 keV) with 2 second temporal resolution. The first spontaneous singularity in the unit cell volume (+0.54 %) was observed at 899 °C under 15 V/mm applied field intensity, which was associated with 13 mA/mm 2 current draw and an increase in density to 97 %. Following anelastic relaxation of the unit cell volume under open circuit conditions, the same applied field was applied twice in a row which resulted in additional induced singularities at 925 °C (+0.48 %) and 944 °C (+0.42 %). A floating baseline, which was above the thermal expansion baseline, was observed from 833 to 969 °C and was attributed to Joule heating. In conclusion, the singularity at 899 °C is associated with a sharp change in (111) FWHM and a 34 % decrease in integrated peak area that was attributed to changes in the distribution of oxygen vacancies and the changes in their concentration as induced by the applied field in the spontaneous transient stage of flash sintering.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Enhancing Superionic Conductivity in Cluster-Based Sodium-Rich Antiperovskites

Sodium (Na) superionic conductors are the key to developing next-generation solid-state batteries with safety and low cost. However, most of the known Na-conductors exhibit limited ionic conductivities at room temperature (RT), hindering their practical applications. To meet the challenge, a series of Li- and Na-rich antiperovskite superionic conductors based on cluster ions (e.g. BH4- and BCl4-) have been theoretically developed [e.g. Fang et al. PNAS 114, 11046, 2017; ACS App. Mat. Inter. 11, 963, 2018]. These materials exhibit superior properties as solid electrolytes with greatly enhanced ionic conductivities at RT. One cluster-based solid electrolyte of such, Na3O(BH)4, has been successfully synthesized for the first time most recently and its measured RT ionic conductivity is well above 10-3 S/cm which is four orders of magnitude higher than that of its halogen counterparts Na3OX (X = Cl, Br, I) [Sun et al. J. Am. Chem. Soc. 141, 5640, 2019]. In this work, we aim to further enhance the ionic conductivity of the Na-superionic conductor by using chemical mixing according to the size effect. The study further shows the advantage of utilizing cluster ions as building blocks, introducing additional degrees of freedom into tuning the properties of superionic conductors.

Fang, Hong↗
NASA NTRS1993

Physiological water model development

The water of the human body can be categorized as existing in two main compartments: intracellular water and extracellular water. The intracellular water consists of all the water within the cells and constitutes over half of the total body water. Since red blood cells are surrounded by plasma, and all other cells are surrounded by interstitial fluid, the intracellular compartment has been subdivided to represent these two cell types. The extracellular water, which includes all of the fluid outside of the cells, can be further subdivided into compartments which represent the interstitial fluid, circulating blood plasma, lymph, and transcellular water. The interstitial fluid surrounds cells outside of the vascular system whereas plasma is contained within the blood vessels. Avascular tissues such as dense connective tissue and cartilage contain interstitial water which slowly equilibrates with tracers used to determine extracellular fluid volume. For this reason, additional compartments are sometimes used to represent these avascular tissues. The average size of each compartment, in terms of percent body weight, has been determined for adult males and females. These compartments and the forces which cause flow between them are presented. The kidneys, a main compartment, receive about 25 percent of the cardiac output and filters out a fluid similar to plasma. The composition of this filtered fluid changes as it flows through the kidney tubules since compounds are continually being secreted and reabsorbed. Through this mechanism, the kidneys eliminate wastes while conserving body water, electrolytes, and metabolites. Since sodium accounts for over 90 percent of the cations in the extracellular fluid, and the number of cations is balanced by the number of anions, considering the renal handling sodium and water only should sufficiently describe the relationship between the plasma compartment and kidneys. A kidney function model is presented which has been adapted from a previous model of normal renal function in man. To test the validity of the proposed kidney model, results predicted by the model will be compared to actual data involving injected or ingested fluids and subsequent urine flow rates. Comparison of the model simulation to actual data following the ingestion of 1 liter of water is shown. The model simulation is also shown with actual data following the intravenous infusion of hypertonic saline.

Doty, Susan↗
NASA NTRS2010

Development and Testing of High Surface Area Iridium Anodes for Molten Oxide Electrolysis

Processing of lunar regolith into oxygen for habitat and propulsion is needed to support future space missions. Direct electrochemical reduction of molten regolith is an attractive method of processing, because no additional chemical reagents are needed. The electrochemical processing of molten oxides requires high surface area, inert anodes. Such electrodes need to be structurally robust at elevated temperatures (1400-1600 C), be resistant to thermal shock, have good electrical conductivity, be resistant to attack by molten oxide (silicate), be electrochemically stable and support high current density. Iridium with its high melting point, good oxidation resistance, superior high temperature strength and ductility is the most promising candidate for anodes in high temperature electrochemical processes. Several innovative concepts for manufacturing such anodes by electrodeposition of iridium from molten salt electrolyte (EL-Form process) were evaluated. Iridium electrodeposition to form of complex shape components and coating was investigated. Iridium coated graphite, porous iridium structure and solid iridium anodes were fabricated. Testing of electroformed iridium anodes shows no visible degradation. The result of development, manufacturing and testing of high surface, inert iridium anodes will be presented.

Shchetkovskiy, Anatoliy↗
NASA NTRS2010

Development and Testing of High Surface Area Iridium Anodes for Molten Oxide Electrolysis

Processing of lunar regolith into oxygen for habitat and propulsion is needed to support future space missions. Direct electrochemical reduction of molten regolith is an attractive method of processing, because no additional chemical reagents are needed. The electrochemical processing of molten oxides requires high surface area, inert anodes. Such electrodes need to be structurally robust at elevated temperatures (1400-1600?C), be resistant to thermal shock, have good electrical conductivity, be resistant to attack by molten oxide (silicate), be electrochemically stable and support high current density. Iridium with its high melting point, good oxidation resistance, superior high temperature strength and ductility is the most promising candidate for anodes in high temperature electrochemical processes. Several innovative concepts for manufacturing such anodes by electrodeposition of iridium from molten salt electrolyte (EL-Form? process) were evaluated. Iridium electrodeposition to form of complex shape components and coating was investigated. Iridium coated graphite, porous iridium structure and solid iridium anodes were fabricated. Testing of electroformed iridium anodes shows no visible degradation. The result of development, manufacturing and testing of high surface, inert iridium anodes will be presented.

Shchetkovskiy, Anatoliy↗
NASA NTRSDate not supplied

Silver Electrolysis for Disinfection of Spacecraft Potable Water: 2024 Update

Anodic dissolution of silver electrodes, or “silver electrolysis,” is being investigated as a means of introducing biocidal silver into potable water on exploration spacecraft. This paper provides an update on the effort to implement this technology into a spacecraft potable water system. Previous papers reported on the feasibility of the technology for this application, strategies to prevent a potential fault condition termed “electrode bridging,” results from a preliminary investigation into the cathode reaction, and preliminary multiphysics modeling of the reactor. Since then, work has begun on the design of a next-generation silver electrolysis reactor prototype that will incorporate improvements identified in previous testing and package the reactor in a more flight-like configuration. This development effort has included additional testing to optimize the reactor design for prevention of electrode bridging, further investigation into the cathode reaction (including the use of a dissolved hydrogen sensor), and an assessment of the feasibility of using the reactor in other applications, such as for microbial shock and preparation for system dormancy.

silver biocide↗
DOE OSTI2020

Modeling synergistic fuel cell membrane degradation with mitigating effects of cerium

During operation, polymer-electrolyte fuel cells undergo mechanical and chemical degradation, which behave synergistically and lead to accelerated membrane deterioration over time. This study builds upon previous modeling work on mechanical degradation, as described by a pinhole in the membrane, and chemical degradation mitigation by using cerium. By combining these two models, analysis can be carried out on the coupled degradation methods and how the mitigation effects of cerium disrupt the degradation cycle. The model results show how the presence of a pinhole in the membrane changes the distribution of cerium in the cell and modifies chemical degradation rates. In addition, the model shows how cerium affects the rate of pinhole growth by slowing down the rate of change in mechanical properties due to chemical degradation. Finally, the model shows how cerium modifies the mechanical and chemical degradation rates of the membrane under humidity- and voltage-cycling conditions.

Ehlinger, VM↗