Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “economic potential”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Unlocking the biofuel power of cover crop in Washington State: Enhancing potential through hydrothermal liquefaction

This study evaluates cover crops in Washington State (WA) as a renewable feedstock for hydrothermal liquefaction (HTL), supported by techno-economic (TEA) and life cycle (LCA) analysis. In the Pacific Northwest, fallow land is the common winter practice, generating no income for farmers. Over three years, field trials at two representative sites—Puyallup (cool, wet) and Othello (irrigated, no-till)tested triticale, hairy vetch, crimson clover, winter pea, and fava bean preceding cash crops. Biomass yields, composition, soil impacts, and net revenue were assessed across removal treatments. HTL conversion produced 32–37 wt% biocrude, lower than 48 wt% for sewage sludge, with modeled cradle-to-grave carbon intensities of 26–31 g CO 2 e/MJ and minimum fuel selling prices (MFSP) of $\$$6.75–$\$$7.18 per gallon gasoline equivalent (GGE), comparable to other lignocellulosic feedstocks. No significant changes were observed in soil carbon, nitrogen, or subsequent cash crop yields after cover crop removal. Farmer profitability was possible, particularly for triticale and hairy vetch at $\$$60 per dry ton. To address seasonal variability, blending with wastewater sludge was evaluated. All scenarios delivered >70 % carbon intensity reductions relative to fossil fuels, and with Renewable Identification Number (RIN) credits, MFSPs below $\$$2.5 GGE were achievable. These results demonstrate that cover crops can generate new revenue streams for farmers while serving as a flexible, low-carbon feedstock. Integrating cover crops with waste biomass offers a practical pathway to expand the bioeconomy and support year-round renewable fuel production.

Biofuels↗
DOE OSTI2022

Phylogenetic Diversity and Mycotoxin Potential of Emergent Phytopathogens Within the Fusarium tricinctum Species Complex

Recent studies on multiple continents indicate members of the Fusarium tricinctum species complex (FTSC) are emerging as prevalent pathogens of small-grain cereals, pulses, and other economically important crops. These understudied fusaria produce structurally diverse mycotoxins, among which enniatins (ENNs) and moniliformin (MON) are the most frequent and of greatest concern to food and feed safety. Herein a large survey of fusaria in the Fusarium Research Center and Agricultural Research Service culture collections was undertaken to assess species diversity and mycotoxin potential within the FTSC. A 151-strain collection originating from diverse hosts and substrates from different agroclimatic regions throughout the world was selected from 460 FTSC strains to represent the breadth of FTSC phylogenetic diversity. Evolutionary relationships inferred from a five-locus dataset, using maximum likelihood and parsimony, resolved the 151 strains as 24 phylogenetically distinct species, including nine that are new to science. Of the five genes analyzed, nearly full-length phosphate permease sequences contained the most phylogenetically informative characters, establishing its suitability for species-level phylogenetics within the FTSC. Fifteen of the species produced ENNs, MON, the sphingosine analog 2-amino-14,16-dimethyloctadecan-3-ol (AOD), and the toxic pigment aurofusarin (AUR) on a cracked corn kernel substrate. Interestingly, the five earliest diverging species in the FTSC phylogeny (i.e., F. iranicum, F. flocciferum, F. torulosum, and Fusarium spp. FTSC 8 and 24) failed to produce AOD and MON, but synthesized ENNs and/or AUR. Moreover, our reassessment of nine published phylogenetic studies on the FTSC identified 11 additional novel taxa, suggesting this complex comprises at least 36 species.

Plant Sciences↗
DOE OSTI2023

Heat Transfer Characteristics of Particle and Air Flow Through Additively Manufactured Lattice Frame Material Based on Octet-Shape Topology

Particle-to-supercritical carbon dioxide (sCO 2 ) heat exchanger is a critical component in next-generation concentrating solar power (CSP) plants. The inherently low heat transfer between falling particles and sCO 2 imposes a challenge toward economic justification of levelized cost of electricity produced through solar energy. Introduction of integrated porous media with the walls bounding particle flow has the potential to enhance the overall particle-to-sCO 2 heat exchanger performance. Here, this paper presents an experimental study on heat transfer characterization of additively manufactured lattice frame material based on Octet-shaped unit cell with particles and air as working fluids. The lattice structures were additively manufactured in stainless steel (SS) 316L and SS420 (with 40% bronze infiltration) via Binder jetting process, where the lattice porosities were varied between 0.75 and 0.9. The mean particle diameters were varied from 266 μm to 966 μm. The effective thermal conductivity and averaged heat transfer coefficient were determined through steady-state experiments. It was found that the presence of lattice enhances the effective thermal conductivity by 2–4 times when compared to packed bed of particles alone. Furthermore, for gravity-assisted particle flow through lattice panel, significantly high convective heat transfer coefficients ranging from 200 W/m2K to 400 W/m2K were obtained for the range of particle diameters tested. The superior thermal transport properties of Octet-shape-based lattice frame for particle flow makes it a very promising candidate for particle-to-sCO 2 heat exchanger for CSP application.

14 SOLAR ENERGY↗
NASA NTRS2001

Modeling and Prediction of Wildfire Hazard in Southern California, Integration of Models with Imaging Spectrometry

Large urban wildfires throughout southern California have caused billions of dollars of damage and significant loss of life over the last few decades. Rapid urban growth along the wildland interface, high fuel loads and a potential increase in the frequency of large fires due to climatic change suggest that the problem will worsen in the future. Improved fire spread prediction and reduced uncertainty in assessing fire hazard would be significant, both economically and socially. Current problems in the modeling of fire spread include the role of plant community differences, spatial heterogeneity in fuels and spatio-temporal changes in fuels. In this research, we evaluated the potential of Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) and Airborne Synthetic Aperture Radar (AIRSAR) data for providing improved maps of wildfire fuel properties. Analysis concentrated in two areas of Southern California, the Santa Monica Mountains and Santa Barbara Front Range. Wildfire fuel information can be divided into four basic categories: fuel type, fuel load (live green and woody biomass), fuel moisture and fuel condition (live vs senesced fuels). To map fuel type, AVIRIS data were used to map vegetation species using Multiple Endmember Spectral Mixture Analysis (MESMA) and Binary Decision Trees. Green live biomass and canopy moisture were mapped using AVIRIS through analysis of the 980 nm liquid water absorption feature and compared to alternate measures of moisture and field measurements. Woody biomass was mapped using L and P band cross polarimetric data acquired in 1998 and 1999. Fuel condition was mapped using spectral mixture analysis to map green vegetation (green leaves), nonphotosynthetic vegetation (NPV; stems, wood and litter), shade and soil. Summaries describing the potential of hyperspectral and SAR data for fuel mapping are provided by Roberts et al. and Dennison et al. To utilize remotely sensed data to assess fire hazard, fuel-type maps were translated into standard fuel models accessible to the FARSITE fire spread simulator. The FARSITE model and BEHAVE are considered industry standards for fire behavior analysis. Anderson level fuels map, generated using a binary decision tree classifier are available for multiple dates in the Santa Monica Mountains and at least one date for Santa Barbara. Fuel maps that will fill in the areas between Santa Barbara and the Santa Monica Mountains study sites are in progress, as part of a NASA Regional Earth Science Application Center, the Southern California Wildfire Hazard Center. Species-level maps, were supplied to fire managing agencies (Los Angeles County Fire, California Department of Forestry). Research results were published extensively in the refereed and non-refereed literature. Educational outreach included funding of several graduate students, undergraduate intern training and an article featured in the California Alliance for Minorities Program (CAMP) Quarterly Journal.

Roberts, Dar A.↗
NASA NTRS1989

High speed commercial transport fuels considerations and research needs

NASA is currently evaluating the potential of incorporating High Speed Civil Transport (HSCT) aircraft in the commercial fleet in the beginning of the 21st century. NASA sponsored HSCT enabling studies currently underway with airframers and engine manufacturers, are addressing a broad range of technical, environmental, economic, and related issues. Supersonic cruise speeds for these aircraft were originally focused in the Mach 2 to 5 range. At these flight speeds, both jet fuels and liquid methane were considered potential fuel candidates. For the year 2000 to 2010, cruise Mach numbers of 2 to 3+ are projected for aircraft fuel with thermally stable liquid jet fuels. For 2015 and beyond, liquid methane fueled aircraft cruising at Mach numbers of 4+ may be viable candidates. Operation at supersonic speeds will be much more severe than those encountered at subsonic flight. One of the most critical problems is the potential deterioration of the fuel due to the high temperature environment. HSCT fuels will not only be required to provide the energy necessary for flight, but will also be subject to aerodynamic heating and, will be required to serve as the primary heat sink for cooling the engine and airframe. To define fuel problems for high speed flight, a fuels workshop was conducted at NASA Lewis Research Center. The purpose of the workshop was to gather experts on aviation fuels, airframe fuel systems, airport infrastructure, and combustion systems to discuss high speed fuel alternatives, fuel supply scenarios, increased thermal stability approaches and measurements, safety considerations, and to provide directional guidance for future R and D efforts. Subsequent follow-up studies defined airport infrastructure impacts of high speed fuel candidates. The results of these activities are summarized. In addition, an initial case study using modified in-house refinery simulation model Gordian code (1) is briefly discussed. This code can be used to simulate different types of refineries, emphasizing jet fuel production and relative cost factors.

Lee, C. M.↗
DOE OSTI2024

Amorphous Iridium Oxide-Integrated Anode Electrodes with Ultrahigh Material Utilization for Hydrogen Production at Industrial Current Densities

Herein, ionomer-free amorphous iridium oxide (IrO x ) thin electrodes are first developed as highly active anodes for proton exchange membrane electrolyzer cells (PEMECs) via low-cost, environmentally friendly, and easily scalable electrodeposition at room temperature. Combined with a Nafion 117 membrane, the IrO x -integrated electrode with an ultralow loading of 0.075 mg cm –2 delivers a high cell efficiency of about 90%, achieving more than 96% catalyst savings and 42-fold higher catalyst utilization compared to commercial catalyst-coated membrane (2 mg cm –2 ). Additionally, the IrO x electrode demonstrates superior performance, higher catalyst utilization and significantly simplified fabrication with easy scalability compared with the most previously reported anodes. Notably, the remarkable performance could be mainly due to the amorphous phase property, sufficient Ir 3+ content, and rich surface hydroxide groups in catalysts. Overall, due to the high activity, high cell efficiency, an economical, greatly simplified and easily scalable fabrication process, and ultrahigh material utilization, the IrO x electrode shows great potential to be applied in industry and accelerates the commercialization of PEMECs and renewable energy evolution.

08 HYDROGEN↗
DOE OSTI2025

Methane pyrolysis by Joule heating for graphitic carbon and hydrogen production

The global energy transition toward sustainability requires technologies that can decarbonize energy carriers and fuels while producing valuable materials. Methane, a primary component of natural gas, is both a high-energy-density fuel and a significant greenhouse gas. This study reports an approach for methane pyrolysis utilizing Joule heating within the deposition substrate to drive the endothermic reaction. With electric current passing through a resistive porous carbon cloth, heat is generated to break C-H bonds of methane molecules. Here, the decomposition of methane as it flows through the cloth results in hydrogen production and the formation of conformally layered graphite around the carbon fibers. The effects of input power, chamber pressure, feedstock flow rate, and process duration on hydrogen and graphite production are characterized via in situ mass spectrometry and laser absorption spectroscopy, resulting in methane conversion rates up to 88%, with hydrogen and carbon yields of 82% and 72%, respectively. Material characterization verifies uniform high-quality graphite deposition, with a Raman I D /I G ratio of 0.1 and 3.38 Å d-spacing. This Joule heating method for catalyst-free methane pyrolysis offers the potential for advancing hydrogen production technology by simultaneously producing valuable materials such as solid graphite, thus enhancing the economic viability of the fuel decarbonization process.

Energy Resources↗
DOE OSTI2022

A consolidated bioprocess design to produce multiple high-value platform chemicals from lignocellulosic biomass and its technoeconomic feasibility

5-Hydroxymethyl furfural (HMF) and furfurals are DOE-listed platform chemicals that can be derived from the renewable carbon in the lignocellulosic biomasses and have the potential to replace petroleum-derived alter- natives. High substrate cost and use of expensive solvents limit the economic feasibility of bio-based HMF production on an industrially relevant scale. The study presents an experimental optimized condition that maximizes the chemical-free production of HMF and furfurals without lowering the yield of total fermentable sugars from Saccharum bagasse. Hydrothermal pretreatment at 210 °C for 15 min yielded approximately 10%, 12%, and 46% of HMF, furfurals, and fermentable sugars per gram of dry biomass, respectively. Additionally, the study proposes a consolidated bioprocess model to produce and recover four high-value bioproducts i.e., HMF, furfurals, ethanol, and acetic acid based on the experimental results and evaluates its technoeconomic feasibility considering HMF as the main product. The minimum selling price (MSP) of HMF was estimated to be 930.6 USD/ t which is competitive with its petroleum-derived precursor alternative p-xylene (1,113 USD/t). The sensitivity analysis performed for the process parameters suggests that pretreatment cost and revenues from coproducts immensely influence the MSP of HMF. The preliminary technoeconomic analysis performed on the consolidated bioprocess design indicates that additional revenue streams from diversified coproducts in biorefineries aid in lowering the MSP of high-value bioproducts.

09 BIOMASS FUELS↗
DOE OSTI2025

Microbial Pathways for Cost-Effective Low-Carbon Renewable Indigoidine

Indigoidine is a bioadvantaged platform molecule with diverse applications, including use as a textile dye, biotransistor, biosolar cell, biosensor, and food coloring. There are multiple microbial hosts and carbon sources that can be used and optimized for its production, yet there is limited guidance for which options have the greatest commercial potential. Here, we consider five different host microbes and combine genome-scale metabolic models with techno-economic and lifecycle assessment models. Pseudomonas putida currently outperforms synthetic indigo production and other indigoidine-producing hosts, using glucose, xylose, and lignin-derived aromatics to produce indigoidine at a minimum selling price of $2.9/kg and a greenhouse gas (GHG) footprint of 3.5 kgCO 2e /kg. Optimizing pathways-achieving 90% of the theoretical indigoidine yield from sugars and aromatics-can reduce costs 6-7-fold and GHG emissions 3-10-fold. From a cost perspective, microbes that co-utilize aromatics are advantageous, while selecting hosts that coproduce other value-added molecules can reduce GHG emissions. System-wide improvements and the use of a low-cost, low-carbon nitrogen source are crucial for commercial viability in all cases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Predicting Thermochemical Equilibria with Interacting Defects: Sr 1 − x Ce x Mn O 3 − δ Alloys for Water Splitting

Solar thermochemical hydrogen is one of the few potential routes towards direct fuel production from renewable energy sources, but the thermodynamic boundary conditions for efficient and economic energy conversion are challenging. Success or failure of a given oxide working material depends on the subtle balance between enthalpy and entropy contributions in the redox processes. Developing a mechanistic understanding of the behavior of materials on the basis of atomistic models and first-principles calculations is an important part of advancing the technology. One challenge is to quantitatively predict thermochemical equilibria at high concentrations when the redox-active defects start to interact with each other, thereby impeding the formation of additional defects. This problem is of more general importance to applications that rely on high levels of off-stoichiometry or doping, including, for example, batteries, thermoelectrics, and ceramic fuel cells. To account for such repulsive defect interactions, we introduce a statistical mechanics approach, defining an expression for the free energy of defect interaction based on limited sampling of defect configurations in density functional theory supercell calculations. The parameterization of this energy contribution as a function of defect concentration and temperature allows on-the-fly simulation of thermochemical equilibria. The approach consistently incorporates finite temperature effects by including the leading contributions to the temperature-dependent free energy for the case at hand, i.e., the ideal gas and configurational enthalpies and entropies. We demonstrate the capability and utility of the approach by simulating the water splitting redox processes for Sr 1 − x Ce x Mn O 3 − δ alloys. Published by the American Physical Society 2024

08 HYDROGEN↗
DOE OSTI2024

Carbon Capture from ArcelorMittal Hot Briquetted Iron Plant Using Air Liquide Cryocap™ FG Technology – FEED Study

The process of steel production is energy and carbon intensive with global average energy consumption of 5.5 MWh/tonne of steel and CO2 emission intensity of 1.83 tonne CO2/tonne of steel. The steel making process has inherent CO2 emissions from mineral conversion and is considered major contributors to the global carbon emissions. The steel industry is responsible for 8% of global carbon emissions. The main objective of this research project is to execute and complete a front-end engineering and design (FEED) study for a commercial-scale, carbon capture project that separates 95% of the total CO2 emissions at the ArcelorMittal’s Hot Briquetted Iron (HBI) plant in Portland, TX (Figure 1). The HBI is an ore-based metallic that is used as high-grade feedstock for high-quality steel via an Electric Arc Furnace (EAF) route. The HBI plant produces 2.0 million metric tonnes of high-quality HBI and emits approximately 1 million tonnes CO2/yr. The capture system is a Pressure Swing Adsorption (PSA) system assisted Cryocap™ FG technology (Figure 2). The captured CO2 will be pipeline grade and will be geologically stored in a facility within 10 miles of the CO2 source. The Host Site location in Corpus Christi, TX, is near hydrocarbon processing facilities and near Environmental Justice (EJ) and Qualified Opportunity Zone (QOZ) communities. Due to the location of the Host Site, the retrofit project offers the ability to demonstrate how a workforce focused on the fossil energy sector can be redirected to the clean- energy sector. The Air Liquide Cryocap™ capture technology is a proven technology and has been extensively examined for large industrial applications. It has been shown to be applicable to a variety of industrial applications including the steel industry. Cryocap™ FG (specific setup for Flue Gas application) consists of a Pressure Swing Adsorption (PSA) unit coupled with a Cryogenic System. The PSA pre-concentrates the CO2 from the flue gas, while the cryogenic unit enables the CO2 purity to be increased to the desired level. The scope of this study incorporates completing FEED study of the CO2 capture system which includes point-source CO2 capture and balance-of-plant; Business Case Analysis (BCA) outlining the current and projected volumes of the steel plant’s point sources of CO2 and the potential utilization of tax credits, including its projected revenue and duration; Life Cycle Analysis (LCA); Environmental Justice Analysis; Economic Revitalization and Job Creation Outcomes Analysis; and Workforce Readiness Plan. The plant design work was divided into two components: Inside Battery Limits (ISBL) and Outside Battery Limits (OSBL). The ISBL focuses on the capture system, while the OSBL focuses on the utility feeds and ducting from the plant to the capture system. Various design and engineering deliverables will be developed to define commodity quantities, equipment specifications, and labour effort required to execute the project. These FEED study deliverables will be prepared with the intent to develop an overall project capital cost estimate consistent with an AACE Class 3 estimate. The modular approach for the Cryocap™ FG that is being designed for this study integrates compression, PSA, and cryogenic “bricks” to achieve the desired CO2 capture rates. This carbon capture system integrates easily with the existing plant, thus reducing project costs and risks. It is also capable of managing impurities such as nitrogen oxides (NOx), sulfur oxides (SOx), mercury, hydrocarbons, and particulate matter. The capture system has a smaller footprint than amine-based systems. The two-step process uses PSA to preconcentrate the CO2 in the feedstream and then uses the cryogenic portion to purify and compress the resulting high purity CO2 product. This combination of purification and compression (i.e., process intensification) significantly reduces the CAPEX associated with use of a separate compressor commonly utilized for amine solvent-based systems. Successful completion of the FEED study will provide DOE with a detailed understanding of the costs for scaling up this proven capture technology for commercial applications at industrial facilities.

42 ENGINEERING↗
DOE OSTI2022

Light Water Reactor LEU+ Lattice Optimization

Commercial light water reactor (LWR) operators and fuel vendors in the United States are exploring potential changes to nuclear fuel that include low-enriched uranium plus (LEU+) designs to further improve operational economics (e.g., extend cycle length). LEU+ fuel is fuel with a maximum enrichment between 5 wt% and 10 wt% 235 U; it allows for higher assembly burnup but likely requires additional reactivity control, e.g., increased burnable absorbers. This report examines possible LEU+ fuel lattice design changes using the lattice physics code, SCALE/Polaris. An optimization driver called the Metaheuristic Optimization Tool (MOT) is used to automate domain space exploration and optimization of LEU+ lattice designs. Heuristics from previous LWR lattice optimization studies were used to construct the objective function and define the domain space for optimization. This work successfully demonstrated that the optimization algorithms of MOT can generate feasible, nonproprietary LEU+ lattice designs (GE14 10 × 10 and Westinghouse 17 × 17) that meet the constraints of traditional LWR lattices while extending cycle length.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2023

Summary of Consolidated Interim Storage Advantages and Disadvantages from an Integrated Systems Perspective from Prior Reports and Studies

The question of whether centralized storage of civilian spent nuclear fuel (SNF) should be part of the federal waste management system as an intermediate step before permanent disposal has been debated for more than four decades. Centralized storage facilities were included as a potential component of the U.S. spent fuel management system in the Nuclear Waste Policy Act of 1982 (NWPA), but these facilities were not identified as being essential. When the NWPA was passed, it was expected that a permanent repository would be available around the turn of the century to meet the commitments that were made to start accepting waste by that time. For a number of reasons, a permanent repository was not available at that stage. This report summarizes the advantages and disadvantages of including an ISF as part of an integrated waste management system that have been identified in numerous analyses of the impacts of a consolidated interim storage facility (ISF), previously discussed as monitored retrievable storage, the form of ISF authorized in the NWPA) by the U.S. Department of Energy (DOE) and independent groups. Storing SNF before disposal is a functional requirement for an integrated waste management system. As described below, the studies reviewed in this report have identified a range of benefits that could be obtained by adding a consolidated ISF to the waste management system, including (1) earlier acceptance of fuel by the federal government, (2) reduction in the number of unintended long-term storage sites, (3) added system flexibility and opportunity for better integration, and (4) near-term development and demonstration of institutional and technical infrastructures for large-scale management of SNF. At the same time, these studies have identified potential drawbacks to deployment of an ISF, including (1) potential adverse impacts on development of a repository, (2) additional transportation of SNF, and (3) a large upfront economic investment to establish the consolidated storage capability. In general, the studies that have considered the positive and negative impacts of consolidated storage most comprehensively have concluded that in light of these considerations, the benefits of including an ISF as part of an integrated waste management system can outweigh any real or perceived disadvantages.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Salinity Stress and the Holobiont: Investigating Algal-Bacterial Interactions in Chrysochromulina tobinii

Algae and bacteria form a symbiotic partnership, known as a ”holobiont”, in which both partners provide critical nutrients to each other. Previous research indicates that the composition and structure of the holobiont plays a crucial role in the algal response to environmental stressors, with expression trends varying under stress conditions. Given the increasing prevalence of salinity shifts due to climate change, investigating the responses of these aquatic organisms to salt stress is essential. This is especially true because algae are ecologically and economically important, serving as a nutritive food source for a large range of eco-cohorts and holding potential for biofuel and nutraceutical applications. This study aimed to examine how holobiont community structure is altered in response to salinity shifts and to assess the corresponding changes in gene expression. Metagenomic and metatranscriptomic approaches were utilized to analyze the interactions between the algae, Chrysochromulina tobinii, and its associated bacterial community under varying salinity conditions. Our findings provide insight into the metabolic adaptations of the holobiont and enhance understanding of the survival mechanisms employed in response to osmotic stress.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Cybersecurity Considerations for Grid-Connected Batteries with Hardware Demonstrations

The share of renewable and distributed energy resources (DERs), like wind turbines, solar photovoltaics and grid-connected batteries, interconnected to the electric grid is rapidly increasing due to reduced costs, rising efficiency, and regulatory requirements aimed at incentivizing a lower-carbon electricity system. These distributed energy resources differ from traditional generation in many ways including the use of many smaller devices connected primarily (but not exclusively) to the distribution network, rather than few larger devices connected to the transmission network. DERs being installed today often include modern communication hardware like cellular modems and WiFi connectivity and, in addition, the inverters used to connect these resources to the grid are gaining increasingly complex capabilities, like providing voltage and frequency support or supporting microgrids. To perform these new functions safely, communications to the device and more complex controls are required. The distributed nature of DER devices combined with their network connectivity and complex controls interfaces present a larger potential attack surface for adversaries looking to create instability in power systems. To address this area of concern, the steps of a cyberattack on DERs have been studied, including the security of industrial protocols, the misuse of the DER interface, and the physical impacts. These different steps have not previously been tied together in practice and not specifically studied for grid-connected storage devices. In this work, we focus on grid-connected batteries. We explore the potential impacts of a cyberattack on a battery to power system stability, to the battery hardware, and on economics for various stakeholders. We then use real hardware to demonstrate end-to-end attack paths exist when security features are disabled or misconfigured. Our experimental focus is on control interface security and protocol security, with the initial assumption that an adversary has gained access to the network to which the device is connected. We provide real examples of the effectiveness of certain defenses. This work can be used to help utilities and other grid-connected battery owners and operators evaluate the severity of different threats and the effectiveness of defense strategies so they can effectively deploy and protect grid-connected storage devices.

25 ENERGY STORAGE↗
DOE OSTI2023

Recent Progress in Electrochemical Upgrading of Bio-Oil Model Compounds and Bio-Oils to Renewable Fuels and Platform Chemicals

Sustainable production of renewable carbon-based fuels and chemicals remains a necessary but immense challenge in the fight against climate change. Bio-oil derived from lignocellulosic biomass requires energy-intense upgrading to produce usable fuels or chemicals. Traditional upgrading methods such as hydrodeoxygenation (HDO) require high temperatures (200–400 °C) and 200 bar of external hydrogen. Electrochemical hydrogenation (ECH), on the other hand, operates at low temperatures (<80 °C), ambient pressure, and does not require an external hydrogen source. These environmental and economically favorable conditions make ECH a promising alternative to conventional thermochemical upgrading processes. ECH combines renewable electricity with biomass conversion and harnesses intermediately generated electricity to produce drop-in biofuels. This review aims to summarize recent studies on bio-oil upgrading using ECH focusing on the development of novel catalytic materials and factors impacting ECH efficiency and products. Here, electrode design, reaction temperature, applied overpotential, and electrolytes are analyzed for their impacts on overall ECH performance. We find that through careful reaction optimization and electrode design, ECH reactions can be tailored to be efficient and selective for the production of renewable fuels and chemicals. Preliminary economic and environmental assessments have shown that ECH can be viable alternative to convention upgrading technologies with the potential to reduce CO2 emissions by 3 times compared to thermochemical upgrading. While the field of electrochemical upgrading of bio-oil has additional challenges before commercialization, this review finds ECH a promising avenue to produce renewable carbon-based drop-in biofuels. Finally, based on the analyses presented in this review, directions for future research areas and optimization are suggested.

09 BIOMASS FUELS↗
NASA NTRS1975

ECASTAR methodology

The methodology used for the ECASTAR study was described. A systems approach was utilized, in conjunction with the following tools: input/output economic analysis, net economics, and net energetics. Some of the considerations between the objective of ECASTAR, which is to assess the potential for and impacts of various energy conservation actions, were listed. These include: data base, constraints and criteria, identification and classification of energy conservation actions, relationship between actions of the conservation sector and requirements of other sectors, evaluation of actions with respect to constraints and criteria, evaluation of impacts of energy conservation actions, and presentation of the results. Each one of these topics was discussed.

Source record↗