Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dispersion relation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

An intercomparison of plasma turbulence at three comets: Grigg-Skjellerup, Giacobini-Zinner, and Halley

The power laws are approximately f(exp -1.9), f(exp -1.9), and f(exp -2.1) respectively for the Grigg-Shjellerup (GS), Giacobini-Zinner (GZ), and Halley (H) comets. Other than similarities in the power spectra, the magnetic field turbulence is considerably different at the three comets. Phase steepening is demonstrated to occur at the trailing edges of the GS waves. This is probably due to nonlinear steepening plus dispersion of the left-hand mode components, i.e., the turbulence is whistler-mode. This too can be explained by nonlinear steepening plus dispersion of the magnetosonic waves. At the level of GS and GZ turbulence development when the spacecraft measurements were made, classical three-wave processes, such as the decay or modulation instabilities do not appear to play important roles. It is most likely that the nonlinear steepening and dispersive time scales are more rapid than three-wave processes, and the latter had not had time to develop for the relatively new turbulence. The wave turbulence at Halley is linearly polarized. The exact nature of this turbulence is still not well understood. Several possibilities are suggested, based on a preliminary analyses.

Tsurutani, Bruce T.↗
NASA NTRS1995

An intercomparison of plasma turbulence at three comets: Grigg-Skjellerup, Giacobini-Zinner, and Halley

We examine and intercompare the LF plasma wave turbulence at three comets: Grigg-Skjellerup (GS), Giacobini-Zinner (GZ), and Halley (H). All three have power spectral peaks at the local ion cyclotron frequency (the pump wave) at approx. 10(exp -2) Hz, and a power-law fall-off at higher frequencies that suggest the development of turbulent cascades. The power laws for the three comets are approximately f(exp -1.9), f(exp -1.9) and f(exp -2.1), respectively. However, other than the similarities in the power spectra, we find the magnetic field turbulence is considerably different at the three comets. Phase steepening is demonstrated to occur at the trailing edges of the GS waves. This is probably due to nonlinear steepening plus dispersion of the left-hand mode components. A coherency analysis of GZ turbulence indicates that it is primarily composed of righthanded mode components, i.e., the turbulence is 'whistlermode.' This too can be explained by nonlinear steepening plus dispersion of the magnetosonic waves. At the level of GS and GZ turbulence development when the spacecraft measurements were made, classical three-wave processes, such as the decay or modulation instabilities do not appear to play important roles. It is most likely that the nonlinear steepening and dispersive time scales are more rapid than three-wave processes, and the latter had not had time to develop for the relatively 'new' turbulence. The wave turbulence at Halley is linearly polarized. The exact nature of this turbulence is still not well understood at this time. Several possibilities are suggested, based on our preliminary analyses.

Tsurutani, Bruce T.↗
NASA NTRS2010

Adaptive Attitude Control of the Crew Launch Vehicle

An H(sub infinity)-NMA architecture for the Crew Launch Vehicle was developed in a state feedback setting. The minimal complexity adaptive law was shown to improve base line performance relative to a performance metric based on Crew Launch Vehicle design requirements for all most all of the Worst-on-Worst dispersion cases. The adaptive law was able to maintain stability for some dispersions that are unstable with the nominal control law. Due to the nature of the H(sub infinity)-NMA architecture, the augmented adaptive control signal has low bandwidth which is a great benefit for a manned launch vehicle.

Muse, Jonathan↗
NASA NTRS2019

Guidance, Navigation, and Control for NASA Lunar Pallet Lander

The NASA Lander Technology project is leading the development and integration of the Lunar Pallet Lander (LPL) concept. The objective is to demonstrate precision landing by delivering a payload to the lunar surface within 100 meters of a landing target. Potential landing sites are selected near the lunar pole where water may be present in permanently shadowed regions that could enable future in-situ resource utilization. The LPL is part of a sequence of missions aimed at maturing the necessary technologies, such as lunar precision landing sensors, that will enable the next generation of multi-ton lunar payloads and human landers. This paper provides an overview of the Mission Design, Guidance Navigation and Control (GNC) algorithms, and sensor suite. The results show the LPL simulated trajectory and landing precision performance under nominal and dispersed conditions. The landing precision simulation confirms the need to rely on high-accuracy navigation techniques and sensors such as Terrain Relative Navigation (TRN) and the Navigation Doppler Lidar (NDL), currently being developed for space applications. The results also demonstrate the ability of the guidance and control system to perform a soft lunar touchdown by combining thrust vector control during the solid rocket motor deceleration phase, and pulse engine control, for the liquid powered descent phase.

Orphee, Juan↗
DOE OSTI2026

Toxicity of Common Fluoropolymers and PFAS on C. Elegans and an Innovative Strategy to Promote in Situ Remediation - 26128

Per- and polyfluoroalkyl substances (PFAS) are a broad class of synthetic chemicals used in a variety of modern technologies and consumer products. PFAS have an alkyl backbone with all or most of the hydrogen (H) atoms replaced with fluorine (F) atoms. PFAS generally fall into one of two categories, they can be non-polymeric with relatively low molecular weights, or long-chain polymers. PFAS are a diverse group of organic compounds that can be solids, liquids, dispersions, or gases. Their mobility and toxicity are influenced by their chain lengths and functional groups. Non-polymeric PFAS are common building blocks for the manufacturing of fluoropolymers. Non-polymeric PFAS are known to be mobile in the environment and some are considered contaminants of emerging concern. Polymeric PFAS, or fluoropolymers, are typically thought to be of low concern, however few systematic investigations into their toxicity have been completed. PFAS, including fluoropolymers and microplastics, have been found in pristine environments and animals located far from site of origin including the arctic and deep ocean.

Jacobs, Stephanie [Savannah River National Laborat↗
NASA NTRS2014

Wide-Field Hubble Space Telescope Observations of the Globular Cluster System in NGC 1399*

We present a comprehensive high spatial resolution imaging study of globular clusters (GCs) in NGC 1399, thecentral giant elliptical cD galaxy in the Fornax galaxy cluster, conducted with the Advanced Camera for Surveys(ACS) aboard theHubble Space Telescope(HST).Using a novel technique to construct drizzled point-spreadfunction libraries for HSTACS data, we accurately determine the fidelity of GC structural parameter measurementsfrom detailed artificial star cluster experiments and show the superior robustness of the GC half-light radius,rh,compared with other GC structural parameters, such as King core and tidal radius. The measurement ofrhfor themajor fraction of the NGC 1399 GC system reveals a trend of increasingrhversus galactocentric distance,Rgal,out to about 10 kpc and a flat relation beyond. This trend is very similar for blue and red GCs, which are found tohave a mean size ratio ofrh,redrh,blue0.820.11 at all galactocentric radii from the core regions of the galaxyout to40 kpc. This suggests that the size difference between blue and red GCs is due to internal mechanismsrelated to the evolution of their constituent stellar populations. Modeling the mass density profile of NGC 1399shows that additional external dynamical mechanisms are required to limit the GC size in the galaxy halo regionstorh2 pc. We suggest that this may be realized by an exotic GC orbit distribution function, an extended darkmatter halo, andor tidal stress induced by the increased stochasticity in the dwarf halo substructure at largergalactocentric distances. We compare our results with the GCrhdistribution functions in various galaxies and findthat the fraction of extended GCs withrh5 pc is systematically larger in late-type galaxies compared with GCsystems in early-type galaxies. This is likely due to the dynamically more violent evolution of early-type galaxies.We match our GCrhmeasurements with radial velocity data from the literature and split the resulting sample at themedianrhvalue into compact and extended GCs. We find that compact GCs show a significantly smaller line-of-sight velocity dispersion,cmp22525 km s1, than their extended counterparts,ext31721 km s1.Considering the weaker statistical correlation in the GCrhcolor and the GCrhRgalrelations, the more significantGC sizedynamics relation appears to be astrophysically more relevant and hints at the dominant influence of theGC orbit distribution function on the evolution of GC structural parameters.

Hubble↗
NASA NTRS1976

Laws of effluent dispersion in the steady-state atmospheric surface layer in stable and unstable conditions

The two-dimensional diffusion equation has been solved by an integral method to obtain the distribution of ground-level concentration of an inert effluent emitted from a semi-infinite area source in a steady-state and horizontally homogeneous atmospheric surface layer. Mean wind velocity and eddy diffusivity profiles derived from empirically determined flux-profile relations of Businger et al. (1971) for stable and unstable surface layers were used. It is found that concentration as a function of downwind distance can be described by a simple formula over distances of practical interest in surface layer dispersion. Corresponding results for a cross-wind infinite line source are obtained by simple differentiation. The concentration distribution is completely determined by the friction velocity, the Monin-Obukhov length, the roughness length, and the effluent source strength. The generalization of the integral method needed to obtain accurate solutions of the diffusion equation with the given wind velocity and diffusivity profiles is discussed in an appendix.

Lebedeff, S. A.↗
DOE OSTI2020

How do central and satellite galaxies quench? – Insights from spatially resolved spectroscopy in the MaNGA survey

ABSTRACT We investigate how star formation quenching proceeds within central and satellite galaxies using spatially resolved spectroscopy from the SDSS-IV MaNGA DR15. We adopt a complete sample of star formation rate surface densities (ΣSFR), derived in Bluck et al. (2020), to compute the distance at which each spaxel resides from the resolved star forming main sequence (ΣSFR − Σ* relation): ΔΣSFR. We study galaxy radial profiles in ΔΣSFR, and luminosity weighted stellar age (AgeL), split by a variety of intrinsic and environmental parameters. Via several statistical analyses, we establish that the quenching of central galaxies is governed by intrinsic parameters, with central velocity dispersion (σc) being the most important single parameter. High mass satellites quench in a very similar manner to centrals. Conversely, low mass satellite quenching is governed primarily by environmental parameters, with local galaxy overdensity (δ5) being the most important single parameter. Utilizing the empirical MBH − σc relation, we estimate that quenching via AGN feedback must occur at $M_{\rm BH} \ge 10^{6.5-7.5} \, \mathrm{M}_{\odot }$, and is marked by steeply rising ΔΣSFR radial profiles in the green valley, indicating ‘inside-out’ quenching. On the other hand, environmental quenching occurs at overdensities of 10–30 times the average galaxy density at z∼ 0.1, and is marked by steeply declining ΔΣSFR profiles, indicating ‘outside-in’ quenching. Finally, through an analysis of stellar metallicities, we conclude that both intrinsic and environmental quenching must incorporate significant starvation of gas supply.

Bluck, Asa F. L.↗
NASA NTRS2001

Working Toward Nanotube Composites

One of the most attractive applications of single-wall carbon nanotubes (SWNT) is found in the area of structural materials. Nanotubes have a unique combination of high strength, modulus, and elongation to failure, and therefore have potential to significantly enhance the mechanical properties of today's composites. This is especially attractive for the aerospace industry looking for any chance to save weight. This is why NASA has chosen to tackle this difficult application of SWNT. Nanotube properties differ significantly from that of conventional carbon fibers, and a whole new set of problems, including adhesion and dispersion in the adhesive polymer matrix, must be resolved in order to engineer superior composite materials. From recent work on a variety of applications it is obvious that the wide range of research in nanotubes will lead to advances in physics, chemistry, and engineering. However, the possibility of ultralightweight structures is what causes dreamers to really get excited. One of the important issues in composite engineering is aspect ratio of the fibers, since it affects load transfer in composites. Nanotube length was a gray area for years, since they are formed in bundles, making it impossible to monitor individual nanotube length. Even though bundles are observed to be tens and hundreds of microns long, they can be built of relatively short tubes weakly bound by Van der Waals forces. Nanotube length can be affected by subsequent purification and ultrasound processing, which has been necessary in order to disperse nanotubes and introduce them into a polymer matrix. Some calculations show that nanotubes with 10(exp 5) aspect ratio may be necessary to achieve good load transfer. We show here that nanotubes produced in our laser system are as much as tens of microns long and get cut into lengths of hundreds of nanometers during ultrasound processing. Nanotube length was measured by AFM on pristine nanotube specimens as well, as after sonication. In each case great care was taken to measure individual nanotubes, rather than bundles. Pristine nanotubes were collected on quartz substrates placed directly in the laser oven and exposed for 0.5 s. This results in an equal mix of bundles and individual nanotubes. Nanotube length measurements were limited practically by the lateral span of the AFM scanner, but nanotube length is certainly in excess of 20 micrometers.

Arepalli, Sivaram↗
DOE OSTI2022

Death at watersheds: Galaxy quenching in low-density environments

The evolution of galaxies is influenced by their local and global environment in the cosmic web. Galaxies with very old stellar populations (VO galaxies with D n (4000) index ≥1.75) mostly lie in the centres of galaxy clusters, where they evolve under the influence of processes characteristic of high-density cluster environments. However, VO galaxies have also been found in poor groups in global low-density environments between superclusters, which we call watershed regions. Our aim is to analyse the properties of galaxies in various cosmic environments with a focus on VO galaxies in the watershed regions to understand their evolution, and the origin of the large-scale morphology–density relation. We employ the Sloan Digital Sky Survey DR10 MAIN spectroscopic galaxy sample in the redshift range 0.009 ≤ z ≤ 0.200 to calculate the luminosity–density field of galaxies, to determine groups and filaments in the galaxy distribution, and to obtain data on galaxy properties. The luminosity–density field with smoothing length 8 h -1 Mpc, D8, characterises the global environment of galaxies. We analyse the group and galaxy contents of regions with various D8 thresholds. We divide groups into low- and high-luminosity groups based on the highest luminosity of groups in the watershed region, L gr ≤ 15 × 10 12 h -2 L ⊙ . We compare the stellar masses, the concentration index, and the stellar velocity dispersions of quenched and star-forming galaxies among single galaxies, satellite galaxies, and the brightest group galaxies (BGGs) in various environments. We show that the global density is most strongly related to the richness of galaxy groups. Its influence on the overall star formation quenching in galaxies is less strong. Correlations between the morphological properties of galaxies and the global density field are the weakest. The watershed regions with D8 < 1 are populated mostly by single galaxies, constituting 70% of all galaxies there, and by low-luminosity groups. Still, approximately one-third of all galaxies in the watershed regions are VO galaxies. They have lower stellar masses, smaller stellar velocity dispersions, and stellar populations that are up to 2 Gyr younger than those of VO galaxies in other global environments. In higher density global environments (D8 > 1), the morphological properties of galaxies are very similar. Differences in galaxy properties are the largest between satellites and BGGs in groups. Our results suggest that galaxy evolution is determined by the birthplace of galaxies in the cosmic web, and mainly by internal processes which lead to the present-day properties of galaxies. This may explain the similarity of (VO) galaxies in extremely different environments.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Evaluation of the Radioactive Material Released in the Harborview Research and Training Building and Some Implications for Emergency Response

On 2 May 2019, during the 137 Cs source recovery operation, a source capsule in a research irradiator containing approximately 77.1 TBq was breached. Based on a geometric reconstruction analysis of the damage to the capsule, approximately 46.3 GBq (0.04%) was impacted by the chop saw (grinder) inside a mobile hot cell on the loading dock at the University of Washington Harborview Research and Training (HRT) Building. A very small fraction of the material impacted, less than 1%, was released from the mobile hot cell and then to the rest of the HRT Building. The objectives of this project were to assess the accidental release of 137 CsCl and its implications related to emergency response methods and the ramifications of 137 CsCl transport. The phenomenology of this event was also compared with past alkali halide dispersal events. The vast number of measurements and samples collected by the remediation contractors, the Department of Energy’s Nuclear Emergency Support Team, and the small number of retrospective samples collected by the authors informed the analysis. The techniques included (1) autoradiography and electron microscopy of samples collected from the HRT Building and the irradiator, (2) 3D visualization of deposition on surfaces and within the ventilation system, and (3) a study of the damage to the source capsule to evaluate the Cs particle size and particle composition due to the grinding accident. Subsequently, the cesium contaminant transport through the numerous pathways in the building was reconstructed to assess the deposition on surfaces as a function of particle size. Furthermore, the implications for emergency response are relevant to data quality and management. A Data Quality Objective guides data collection methods so that they have appropriate accuracy and precision for the intended application. Recommendations were made with respect to the sample collection protocols and archiving of samples.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗
DOE OSTI2022

High-Platinum-Content Catalysts on Atomically Dispersed and Nitrogen Coordinated Single Manganese Site Carbons for Heavy-Duty Fuel Cells

Fuel cells for heavy-duty vehicles (HDVs) have attracted considerable attention because of their unique scalability, better fuel economy, the less demand for hydrogen refilling infrastructure. However, the potential application requires more stringent fuel cell durability up to 25,000 h. Membrane electrode assemblies (MEAs) made from platinum group metal (PGM) catalyst with relatively high loading 0.3 mgPt cm –2 play a crucial role in ensuring high-power and long-term durability. Integrating fine PGM nanoparticles and robust carbon support with strengthened interactions is critical for improving MEA performance and durability. Herein, a unique atomically dispersed and nitrogen coordinated single Mn site-rich carbon (M–N–C) support was developed for high content (40 wt%) platinum catalysts for the oxygen reduction reaction (ORR) cathode with reduced thickness. Compared with two controls studied in this work (e.g., a porous graphitic carbon-supported Pt and a commercial TKK Pt/C catalysts), the Pt (40 wt%)/Mn–N–C catalyst exhibited much enhanced catalytic activity and stability for the ORR in both aqueous acidic electrolyte and polymer electrolyte-based MEA. Here, we carefully elucidated the—role of the Mn–N–C support in promoting Pt catalyst concerning its high surface area, partially graphitic structure, and nitrogen dopants, providing better Pt nanoparticle dispersion, and strengthened interactions between Pt and carbon. Consequently, the MEA from the Pt (40 wt%)/Mn–N–C catalyst generated a 1.61 A cm –2 at 0.7 V based on HDV conditions (0.2 mgPt cm –2 and 250 kPa air). More importantly, the MEA is highly durable and can retain 1.31 A cm –2 at 0.7 V after 30,000 voltage cycles (~19% loss), surpassing the commercial Pt/C catalyst (loss of ~56%). Therefore, the Mn–N–C carbon-supported Pt catalyst holds a great promise to meet the challenging DOE target (1.07 A cm –2 at 0.7 V after 150,000 cycles) for HDVs.

25 ENERGY STORAGE↗
NASA NTRS1994

Microcapsules and Methods for Making

This invention relates to methods for forming multi-lamellar microcapsules of both hydrophilic and hydrophobic immiscible liquid phases using several polymer/solvent systems. Liquid-Liquid diffusion and spontaneous emulsification are controlled by properly timed sequence exposures of immiscible phases in aqueous vehicles dispersed in hydrocarbon solvents containing small quantities of oil, co-surfactants, and glycerides. Water-in-oil and oil-in-water microcapsules are formed containing selected combinations of several types of drugs, co-encapsulated within fluid compartments inside the microcapsule. Commercial applications of the process and the resultant product relate to drug therapy for treating medical conditions such as cancer, circulatory conditions, and other conditions in which pharmaceuticals are advantageously targeted to specific organs, or delivered in combination with other pharmaceuticals. Small microcapsules may be delivered intravenously to diseased organs or clotted vessels. The use of multiple drugs within the same microcapsule structure provides advantages for applications such as chemoembolization treatments and may be used to deliver both chemotherapeutic drugs, against tumor cells, and an immuno-adjuvant or immunological stimulant to enhance the patient's immune response. Active forms of urokinase and other enzymes may be delivered without dilution to the local site of an embolism for dissolving the embolism. Thus, the invention has several potentially valuable commercial applications related to pharmaceutical and medical applications.

Morrison, Dennis R.↗
DOE OSTI2026

Combustion-assisted ink-jet printing of nuclear targets

Advances in target fabrication are critical to high-precision measurements in nuclear physics. This work details the preparation of patterned CeO 2 and ThO 2 architectures and thin-film targets via ink-jet deposition of combustible solutions. The produced targets were characterized by scanning electron microscopy (SEM), and by alpha-particle spectroscopy for radioactive targets to determine densities. Ink jet printing of the targets, used both ethanol and 2-methoxyethanol as solvents, with cerium or thorium nitrate as the oxidizer and acetylacetone as the fuel. Additionally, we found that the distance between each droplet dispersion (step size) played the most significant role in determining the final pattern uniformity and thickness. A 50 μm step size leads to relatively thick targets with a density of 350 μg/cm 2 . Significant overlap in droplet sizes leads to a heterogeneous target with an undesirable cracked surface structure. In contrast, 150 μm spacing yields thinner (20 μg/cm 2 ) patterned structures with excellent surface coverage. This method of Ink-jet printing provides a straightforward, scalable, and high-efficiency pathway to prepare custom made, high-quality targets for nuclear physics experiments.

CeO2↗
DOE OSTI2024

Development of Manganese and Iron Mixed Metal Oxides for Thermochemical Energy Storage

Energy storage plays an essential role for sustainable and renewable energy use in an effort to reduce carbon emissions. Thermochemical energy storage (TCES) is a favorable alternative to fossil fuel energy systems and a promising solution to the intermittency problem of renewable energy sources (such as solar energy). TCES stores energy in the form of chemical bonds using reversible redox reactions (such as manganese metal oxides). This study developed manganese oxide (Mn2O3) and iron oxide (Fe2O3) with an inert dispersant of silicon dioxide (SiO2) (Mn-Fe-Si) for potential large scale energy storage application. These metal oxides are nontoxic, cheap, and relatively abundant. The materials were prepared with varying metal oxide content using physical mixing in a ball mill, pressure pelletization and calcination at different temperatures. Redox cycle tests were conducted using differential scanning calorimetry combined with thermogravimetric analysis (TGA-DSC). The Mn-Fe-Si materials had higher cyclability and energy release compared to the pure metal oxides and manganese oxide with SiO2. The calcination temperature had a significant effect on releasable energy due to the interactions between the oxides. The Mn-Fe-Si mixture calcined at high temperature (1000oC) showed the highest average energy storage density.

Wilkinson, Olivia↗
NASA NTRS1984

Magnetospheric ions and electrons in the distant magnetosheath at about 50 and 180 earth radii - ISEE-3 observations

Energetic particle data were obtained in the dawn magnetosheath at about 50 earth radii (ER), analyzed, and compared with data taken at 180 ER. Both data sets were acquired during the ISEE-3 geotail mission. The results of analyses of the 16 sec time profiles of 32 and 130 keV protons, 75-115 keV electrons, and some of the 30-36 keV proton angular distributions (PAD) are presented. No temporal dispersions were detected in the particle bursts, implying instead a spatial dispersion. The particles filled flux tubes of 6 ER, with the energetic electrons being beamed along magnetic field lines. PADs displayed anisotropy symmetric relative to the magnetic field. The electrons were not detected at 180 ER. The phenomena are modeled as flux tubes connected to the magnetotail magnetic field in the near-earth magnetopause. The particles leak out along connected field lines. Lion roars scatter the electrons, which escape into interplanetary space. Ions, however, may carry their intensity out to 200 ER, a factor which awaits verification by further data.

Scholer, M.↗
NASA NTRS1997

Pulmonary Deposition of Aerosols in Microgravity

The intrapulmonary deposition of airborne particles (aerosol) in the size range of 0.5 to 5 microns is primarily due to gravitational sedimentation. In the microgravity (muG) environment, sedimentation is no longer active, and thus there should be marked changes in the amount and site of the deposition of these aerosol. We propose to study the total intrapulmonary deposition of aerosol spanning the range 0.5 to 5 microns in the KC-135 at both muG and at 1.8-G. This will be followed by using boli of 1.0 micron aerosol, inhaled at different points in a breath to study aerosol dispersion and deposition as a function of inspired depth. The results of these studies will have application in better understanding of pulmonary diseases related to inhaled particles (pneumoconioses), in studying drugs delivered by inhalation, and in understanding the consequence of long-term exposure to respirable aerosols in long-duration space flight.

Prisk, G. Kim↗