Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dielectrics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Detection of strength limiting defects in cellular glasses by dielectric measurements

The foamed glasses that are being considered for structural support in solar thermal energy system silvered glass concentrator mirrors are assessed for strength-limiting defects by a nondestructive technique which measures the capacitance of well defined regions. The feasibility of locating large defects is demonstrated for the case of one type of cellular mass. Observed capacitance variations are believed to be due to small voids or other irregularities in the material. If the defects are equal to or greater than approximately 20 times the glass matrix pore size, they can be resolved with sufficient accuracy to delineate their spatial extent.

Gammell, P. M.↗
NASA NTRS1982

Characteristics of RF resulting from dielectric discharges

This paper presents measurements of the electromagnetic radiation pulses and the replacement current pulses which result from the breakdown of Mylar and Kapton samples. The observed dependence of the characteristics of the replacement current pulse as a function of electron beam energy is discussed. The characteristics of the electromagnetic radiation pulses are also analyzed in the text of this paper. The source of the irradiating electrons is a monoenergetic electron beam whose energy was varied from 12.5 KeV to 25 KeV.

Leung, P.↗
NASA NTRS1982

Optical measurement of the velocity of dielectric surface arcs

Surface flashover arc discharge velocities on electron-beam-charged polymer sheets have been measured directly by detecting the light emitted at two points along a straight arc and measuring the time interval between light pulses. For Mylar, the average velocity is 1.2 x 10 to the 6th m/s, and for Teflon the average velocity is approximately 7.3 x 10 to the 5th m/s independent of sheet thickness. These velocities are about two to four times higher than previous measurements. The techniques employed to produce single, straight surface arcs are described.

Balmain, K. G.↗
NASA NTRS1982

Materials characterization and fracture mechanics of a space grade dielectric silicone insulation

The present investigation is concerned with the DC 93-500 high voltage silicone insulation material employed to pot the gun and the collector end of a traveling wave tube (TWT) used on the Landsat D Satellite. The fracture mechanics behavior of the silicone resin was evaluated by measuring the slow crack velocity as a function of the opening mode of the stress intensity factor at +25 and -10 C, taking into account various uniaxial discrete strain values. It was found that the silicone resins slow crack growth is faster than that for a high voltage insulation polyurethane material at the same stress intensity factor value and room temperature.

Abdel-Latif, A. I.↗
NASA NTRS1983

Wave scattering and guidance by dielectric waveguides with periodic surfaces

The extended-boundary-condition method is used to solve the wave scattering and guidance by a stratified medium with a periodic surface. First, the transition matrix for two sets of Flocquet waves incident from above and below a periodic surface separating the two media is derived. The results are applied to the diffraction of an incident plane wave by a multilayered medium having a periodic surface. The theoretical results can easily be applied to the guidance problem for which the complex guiding constant of the periodic structure is obtained. Numerical results for both the scattering and the guidance problems are obtained. The theory is compared with experiment for metallic gratings with surface-plasmon excitations. The calculated guiding constants of a thin film with a periodic sinusoidal surface are also compared with other numerical methods.

Chuang, S. L.↗
NASA NTRS1983

Thermal dielectric breakdown with cylindrical electrodes

Solutions to the equations of thermal breakdown are computed for cylindrial electrodes with different boundary conditions. The development of the electric field and the temperature distributions are followed as functions of time, consequent on the application of a constant interelectrode voltage. The implications for possible breakdown by modes other than thermal are briefly discussed.

Beers, B. L.↗
NASA NTRS1984

Dielectric based submillimeter backward wave oscillator circuit

A ladder circuit especially useful in backward wave oscillators operating in the 500 GHz to 2000 GHz range has a waveguide with transversely orientated slabs which contact an upper wall of the waveguide. The edges of the slabs adjacent to the physical center of waveguide are curved segments and stubs of electrically conductive, nonmagnetic material. The ends of slabs include metal layers at opposite ends to provide a conductive leakage path. A ridge bar is attached to the inside of the bottom wall of the waveguide and includes a concave upper surface which partially straddles the electron beam. The novelty of the invention lies in the ladder structure compared of thin, vapor deposited rungs supported on the edge of diamond slabs; each rung having a curved segment which straddles the electron beam together with a ridge bar which also straddles the electron beam.

Kosmahl, H. G.↗
NASA NTRS1984

Behavior of Combined Dielectric-Metallic Systems in a Charged Particle Environment

The charging and discharging characteristics of an electrically isolated solar array segment were studied in order to simulate discharges seen during geomagnetic substorms. A solar array segment was floated while bombarded with monoenergetic electrons at various angles of incidence. The potentials of the array surface and of the interconnects were monitored using Trek voltage probes to maintain electrical isolation. A back plate was capacitively coupled to the array to provide information on the characteristics of the transients accompanying the discharges. Several modes of discharging of the array were observed at relatively low differential and absolute potentials (a few kilovolts). A relatively slow discharge response in the array was observed, discharging over one second with currents of nanoamps. Two types of faster discharges were also seen which lasted a few hundredths of a millisecond and with currents on the order of microamps. Some results indicate an electron emission process associated with the arcs.

Gordon, W. L.↗
NASA NTRS1985

Dielectric material in the space environment

The irradiation encountered in space environments causes high insulation materials to discharge, either through electrical breakdown or surface voltage effect mechanisms. Attention is presently given to polymers which, serving as 'leaky' insulators, avoid this problem by means of conduction mechanisms that are acceptable in space applications. The class of conductive polymers encompasses polyvinylcarbazole, polyacrylonitrile, Kapton, and polythiazil. A testing procedure useful in the qualification of such polymers is outlined.

Frederickson, A. R.↗
NASA NTRS1984

Dielectric Fabry-Perot mirror coatings for infrared astronomy

A number of Fabry-Perot (FP) coating designs have been developed specifically for IR astronomy. These have been optimized for uniform reflectance over five contiguous spectral ranges of particular astronomical interest between 1 and 5 microns. Wavelength coverage in individual designs is given by (maximum wavelength/minimum wavelength) greater than 1.4, over which reflective finesse is maintained near 35. Consideration has been made for the peculiar requirements of FP coatings. Visual alignment and testing of the FP has been made convenient by bringing the reflective finesse of the coating at 632.8 nm to the same value as the main IR reflection band. For example, a calcium fluoride FP can be aligned and tested at 632.8-nm He-Ne laser line, with the assurance of a corresponding finesse and spectral resolving power over its IR (3.6-5.1-micron) range. In addition, the FP can be used for IR spectroscopy while being simultaneously monitored and/or actively controlled at the laser wavelength. The potential for the coating itself to degrade the effective surface flatness of the FP through either mechanical stress or thickness nonuniformities is minimized by reducing to a minimum the number and thickness of coating layers. Several of these coatings have been fabricated and are actively in use at a number of observatories.

Trauger, J.↗
NASA NTRS1985

'Diamondlike' carbon films - Optical absorption, dielectric properties, and hardness dependence on deposition parameters

An RF plasma deposition system was used to prepare amorphous 'diamondlike' carbon films. The source gases for the RF system include methane, ethylene, propane, and propylene, and the parameters varied were power, dc substrate bias, and postdeposition anneal temperature. Films were deposited on various substrates. The main diagnostics were optical absorption in the visible and in the infrared, admittance as a function of frequency, hardness, and Auger and ESCA spectroscopy. Band gap is found to depend strongly on RF power level and band gaps up to 2.7 eV and hardness up to 7 Mohs were found. There appears to be an inverse relationship between hardness and optical band gap.

Natarajan, V.↗
NASA NTRS1985

Secondary electron emission from a charged dielectric

Charges on the surface of fluorinated-ethylene-propylene affect its secondary electron emission coefficient. Measurements with impact energies exceeding that energy which causes peak emission have been made in regions where the local electric field produced by the surface charge is normal to the surface and in regions where it is oblique. The surface of the 6-mm wide specimen was charged to either 6 or 10 kV. Because the impinging primary beam was deflected by the charged specimen, numerical modeling was used to predict the beam's impact energy E, impact angle theta, and the impact point. The formula predicts the coefficient in the region of normal field up to 60 deg although E(0) depends upon the electric field and also on the history of the specimen. Near the edges where the field is oblique, the measured coefficient departs significantly from what the formula predicts.

Budd, P. A.↗
NASA NTRS1987

Giotto-spacecraft charging due to impact generated plasma in the presence of dielectric materials

The charging effects of a conducting/dielectric model spacecraft in the impact induced plasma environment are contrasted. The results of dynamic model calculations indicate larger charging times and higher positive spacecraft potentials for a conducting/dielectric spacecraft. The potential and particle distributions around the spacecraft differ quantitatively and qualitatively in both cases.

Thiemann, H.↗
NASA NTRS1988

Low noise cryogenic dielectric resonator oscillator

A microwave oscillator is provided which can operate at a temperature of many degrees above absolute zero while providing very low phase noise that has heretofore generally required temperatures within a few degrees K. The oscillator includes a ring-shaped resonant element of ruby (sapphire plus chromium) or iron sapphire crystal, lying adjacent to a resonator element of sapphire, so that the regenerator element lies directly in the magnetic field of the resonator element. The resonator element is substantially devoid of contact with electrically conductive material. Microwave energy of a pump frequency (e.g., 31 GHz) is outputted from the regenerator element, while signal energy (e.g., 10 GHz) is outputted from the resonator element.

Dick, G. John↗
NASA NTRS1988

Effective permittivity of dielectric mixtures

General mixing formulas are derived for discrete scatterers immersed in a host medium. The inclusion particles are assumed to be ellipsoidal. The electric field inside the scatterers is determined by quasi-static analysis, assuming the diameter of the inclusion particles to be much smaller than one wavelength. The results are applicable to general multiphase mixtures, and the scattering ellipsoids of the different phases can have different sizes and arbitrary ellipticity distribution and axis orientation, i.e., the mixture may be isotropic or anisotropic. The resulting mixing formula is nonlinear and is suitable for iterative solutions. The formula contains a quantity called the apparent permittivity, and with different choices of this quantity, the result leads to the generalized Lorentz-Lorenz formula, the generalized Polder-van Santen formula, and the generalized coherent potential-quasicrystalline approximation formula. The results are applied to calculating the complex effective permittivity of dry and wet snow, and sea ice.

Sihvola, Ari H.↗