Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “computational studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Effect of a localized minimum in equatorial field strength on resistive tearing instability in the geomagnetotail

A two-dimensional, resistive-MHD computer code is used to investigate the spontaneous reconnection of magnetotaillike configurations. The initial conditions adopted in the simulations are of two types: (1) in which the equatorial normal magnetic field component B(ze) declines monotonically down the tail, and (2) in which B(ze) exhibits a deep minimum in the near-earth plasma sheet. To represent the case where the earthward convection stops before the X line forms, zero-flow boundary conditions are imposed at the edges of the computational box. The initial configurations are in equilibrium and table within ideal MHD. The dynamic evolution of the system starts after the resistivity is turned on. The main results of these simulations basically support the neutral-line model of substorms and confirm Birn's (1980) computer studies. Spontaneous formation of an X-type neutral point and a single O-type plasmoid with strong tailward flow on the tailward side of the X point is found. The time interval from the turning on of the resistivity to the formation of a plasmoid is much shorter in the case where there is an initial deep minimum. A simple analytic calculation is also carried out to demonstrate why the configuration with a deep minimum is more susceptible to the development of the neutral point.

Hau, L.-N.↗
NASA NTRS1987

Effects of diatomic reagent alignment on the A + BC reaction

A computational study is reported on the A + BC - AB + C bimolecular exchange reaction in which BC is aligned with respect to the approach direction of atom A so that the initial rotational angular momentum vector of BC is either parallel (or equivalently antiparallel) or perpendicular to the initial velocity vector of A. The calculations employ a modification of the extended LEPS potential, which permits straightforward generation of noncollinear minimum energy reaction paths. The calculations clearly demonstrate that diatomic reagent alignment can markedly affect the nature of reaction product early partitioning; they also demonstrate that diatomic reagent alignment affects reactive cross sections.

Pattengill, M. D.↗
NASA NTRS1988

Effects of subcritical crack growth on fracture toughness of ceramics assessed in chevron-notched three-point bend tests

A numerical computational study was carried out to assess the effects of subcritical crack growth on crack stability in the chevron-notched three-point bend specimens. A power-law relationship between the subcritical crack velocity and the applied stress intensity were used along with compliance and stress-intensity relationships for the chevron-notched bend specimen to calculate the load response under fixed deflection rate and a machine compliance. The results indicate that the maximum load during the test occurs at the same crack length for all the deflection rates; the maximum load, however, is dependent on the deflection rate for rates below the critical rate. The resulting dependence of the apparent fracture toughness on the deflection rate is compared to experimental results on soda-lime glass and polycrystalline alumina.

Chao, L. Y.↗
NASA NTRS1988

Modeling of hydrogen-air diffusion flame

Work performed during the first six months of the project duration for NASA Grant (NAG-1-861) is reported. An analytical and computational study of opposed jet diffusion flame for the purpose of understanding the effects of contaminants in the reactants and thermal diffusion of light species on extinction and reignition of diffusion flames is in progress. The methodologies attempted so far are described.

Isaac, K. M.↗
NASA NTRS1987

Design improvement of a pump wear ring labyrinth seal

The investigation was successful in obtaining two improved designs for the impeller wear ring seal of the liquid hydrogen turbopump of interest. A finite difference computer code was extensively used in a parametric computational study in determining a cavity configuration with high flow resistance due to turbulence dissipation. These two designs, along with that currently used, were fabricated and tested. The improved designs were denoted Type O and Type S. The measurements showed that Type O and Type S given 67 and 30 percent reduction in leakage over the current design, respectively. It was found that the number of cavities, the step height and the presence of a small stator groove are quite important design features. Also, the tooth thickness is of some significance. Finally, the tooth height and an additional large cavity cut out from the stator (upstream of the step) are of negligible importance.

Rhode, David L.↗
NASA NTRS1989

Modeling of hydrogen-air diffusion flame

An analytical and computational study of opposed jet diffusion flame for the purpose of understanding the effects of contaminants in the reactants and thermal diffusion of light species on extinction and reignition of diffusion flames is in progress. The methodologies that have been attempted so far are described. Results using a simple, one-step reaction for the hydrogen-air counterflow diffusion flame are presented. These results show the correct trends in the profiles of chemical species and temperature. The extinction limit can be clearly seen in the plot of temperature vs. Damkohler number.

Isaac, K. M.↗
NASA NTRS1988

Evolution of nonlinear polarization in localized and finite amplitude Alfven waves

Theoretical and computational study for a polarization change of localized and finite amplitude Alfven waves propagating parallel to an applied magnetic field is presented using both reductive perturbation theory and numerical simulations. In the magnetohydrodynamic limit, where right-hand and left-hand circularly polarized waves are degenerate, one of the transverse components of the circularly polarized Alfven wave is stable as it propagates, but the other component is unstable to either self-focusing or diffraction effects. Consequently, the wave changes its polarization from circular to linear. In the high frequency regime, where two circularly polarized waves (right-hand and left-hand circularly polarized waves) are not degenerate, two transverse components of the circularly polarized Alfven wave are strongly coupled to each other, and there is almost no polarization change.

Hoshino, M.↗
NASA NTRS1989

Upwind Navier-Stokes solutions for leading-edge vortex flows

An incompressible Navier-Stokes solver using an upwind finite-difference algorithm is employed to investigate low-speed, three-dimensional, laminar, leading-edge vortex flows over three round-edged low-aspect-ratio wings. The effects of grid density, Reynolds number, and wing planform on the flowfield structures and integral values are studied. Computed results show good qualitative and quantitative agreement with the available experimental data.

Hsu, C.-H.↗
NASA NTRS1989

A natural low-frequency oscillation of the flow over an airfoil near stalling conditions

An experimental and computational study of the low-frequency oscillation observed in the flow over an airfoil at the onset of static stall is presented. Wind-tunnel results obtained with two-dimensional airfoil models show that this phenomena takes place only with a transitional state of the separating boundary layer. It is noted that the flowfield does not involve a Karman vortex street. The experimental results agree well with the results of a two-dimensional Navier-Stokes code. The present study demonstrates that the low-frequency oscillations produce intense flow fluctuations which impart much larger unsteady forces to the airfoil than experienced by bluff-body shedding and which may represent the primary aerodynamics of stall flutter of blades and wings.

Zaman, K. B. M. Q.↗
NASA NTRS1988

An experimental investigation of the aerodynamic characteristics of slanted base ogive cylinders using magnetic suspension technology

An experimental investigation is reported on slanted base ogive cylinders at zero incidence. The Mach number range is 0.05 to 0.3. All flow disturbances associated with wind tunnel supports are eliminated in this investigation by magnetically suspending the wind tunnel models. The sudden and drastic changes in the lift, pitching moment, and drag for a slight change in base slant angle are reported. Flow visualization with liquid crystals and oil is used to observe base flow patterns, which are responsible for the sudden changes in aerodynamic characteristics. Hysteretic effects in base flow pattern changes are present in this investigation and are reported. The effect of a wire support attachment on the 0 deg slanted base model is studied. Computational drag and transition location results using VSAERO and SANDRAG are presented and compared with experimental results. Base pressure measurements over the slanted bases are made with an onboard pressure transducer using remote data telemetry.

Alcorn, Charles W.↗
NASA NTRS1990

On spurious steady-state solutions of explicit Runge-Kutta schemes

The bifurcation diagram associated with the logistic equation v sup n+1 = av sup n (1-v sup n) is by now well known, as is its equivalence to solving the ordinary differential equation u prime = alpha u (1-u) by the explicit Euler difference scheme. It has also been noted by Iserles that other popular difference schemes may not only exhibit period doubling and chaotic phenomena but also possess spurious fixed points. Runge-Kutta schemes applied to both the equation u prime = alpha u (1-u) and the cubic equation u prime = alpha u (1-u)(b-u) were studied computationally and analytically and their behavior was contrasted with the explicit Euler scheme. Their spurious fixed points and periodic orbits were noted. In particular, it was observed that these may appear below the linearized stability limits of the scheme and, consequently, computation may lead to erroneous results.

Sweby, P. K.↗
NASA NTRS1990

Computed structures of polyimides model compounds

Using a semi-empirical approach, a computer study was made of 8 model compounds of polyimides. The compounds represent subunits from which NASA Langley Research Center has successfully synthesized polymers for aerospace high performance material application, including one of the most promising, LARC-TPI polymer. Three-dimensional graphic display as well as important molecular structure data pertaining to these 8 compounds are obtained.

Tai, H.↗
NASA NTRS1989

Oscillatory flow with heat transfer in a square cavity

A computational study is presented for the flow inside an oscillatory cavity. The numerical scheme employs a semi-implicit, time-splitting method to integrate the two-dimensional full Navier-Stokes equations satisfying continuity to machine accuracy. The efficient use of direct solvers for the uncoupled momentum and pressure equations is demonstrated. The oscillatory cavity flow is studied considering the effects of heat transfer, Reynolds number, and oscillatory Stokes number.

Biringen, S.↗
NASA NTRS1990

Counterrotating prop-fan simulations which feature a relative-motion multiblock grid decomposition enabling arbitrary time-steps

Improvements are presented of a computer algorithm developed for the time-accurate flow analysis of rotating machines. The flow model is a finite volume method utilizing a high-resolution approximate Riemann solver for interface flux definitions. The numerical scheme is a block LU implicit iterative-refinement method which possesses apparent unconditional stability. Multiblock composite gridding is used to orderly partition the field into a specified arrangement of blocks exhibiting varying degrees of similarity. Block-block relative motion is achieved using local grid distortion to reduce grid skewness and accommodate arbitrary time step selection. A general high-order numerical scheme is applied to satisfy the geometric conservation law. An even-blade-count counterrotating unducted fan configuration is chosen for a computational study comparing solutions resulting from altering parameters such as time step size and iteration count. The solutions are compared with measured data.

Janus, J. Mark↗
NASA NTRS1990

Oscillatory flow with heat transfer in a square cavity

A computational study is presented for the flow inside an oscillatory cavity. The numerical scheme employs a semiimplicit, time-splitting method to integrate the two-dimensional full Navier-Stokes equations satisfying continuity to machine accuracy. The efficient use of direct solvers for the uncoupled momentum and pressure equations is demonstrated. The oscillatory cavity flow is studied considering the effects of heat transfer, Reynolds number and oscillatory Stokes number.

Danabasoglu, G.↗
NASA NTRS1990

Laser skin friction measurements and CFD comparison of weak-to-strong swept shock/boundary-layer interactions

A joint experimental and computational study of skin friction in weak-to-strong swept shock wave/turbulent boundary-layer interactions has been carried out. A planar shock wave is generated by a sharp fin at angles of attack alpha = 10 deg and 16 deg at M(infinity) = 3 and 16 and 20 deg at M(infinity) = 4. Measurements are made using the Laser Interferometer Skin Friction meter, which optically detects the rate of thinning of an oil film applied to the test surface. The results show a systematic rise in the peak c(f) at the rear part of the interaction, where the separated flow atttaches. For the stronget case studied, this peak is an order of magnitude higher than the incoming freestream c(f)level.

Kim, K.-S.↗
NASA NTRS1990

Numerical simulation of solidification in a horizontal cylindrical annulus charged with an aqueous salt solution

A computational study of solidification of a binary Na2CO3 solution in a horizontal cylindrical annulus is performed using a continuum formulation with a control-volume based, finite-difference scheme. The initial conditions were selected to facilitate the study of counter thermal and solutal convection, accompanied by extensive mushy region growth. Numerical results are compared with experimental data with mixed success. Qualitative agreement is obtained for the overall solidification process and associated physical phenomena. However, the plume thickness calculated for the solutally-driven convective upflow is substantially smaller than the observed value. Evolution of double-diffusive layers is predicted, but over a time scale much smaller than that observed experimentally. Good agreement is obtained between predicted and measured results for solid growth, but the mushy region thickness is significantly overpredicted.

Neilson, D. G.↗
NASA NTRS1990

A numerical study of the onset of baroclinic instabilities in spherical geometry

The onset of instabilities in a fluid contained in a rotating hemispherical shell, driven by thermal gradients imposed upon the hemispherical boundaries and by a spherically symmetric radial body force, is numerically studied. Computations are presented for a range of Taylor and thermal Rossby numbers. The analysis indicates the presence of an instability dependent upon the spherically radial gravity alone when the warmest temperatures are at the pole and an additional centrifugal buoyant instability for weak imposed gravity and fast rotation when the temperature decreases poleward.

Miller, Timothy L.↗