Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Pb:Sn Ratio-Driven Polytypism and Band Modulation in Photoresponsive Hexagonal Perovskitoids

Three-dimensional (3D) perovskites of the formula AMX 3 are known for their excellent optoelectronic properties, but their design is limited by the narrow range of A-site cations that can template the 3D corner-sharing structure, and many of the viable options have already been explored. These materials also face structural instability under environmental conditions. In contrast, 3D hexagonal perovskitoids, with the same chemical formula, may offer enhanced stability and richer structural diversity through a range of corner- and face-sharing octahedral configuration options, providing greater opportunities for structural design; however, challenges such as synthesis complexity and wide band gaps have hindered optoelectronic performance achieved to date. Herein, we synthesized a structural homologous series of mixed-metal hexagonal perovskitoids with the formula APb 1-x Sn x I 3 (x = 0, 0.25, 0.50, 0.75, 1; A = ethylammonium, guanidinium) and identified three polytypes (9R, 12R, 6H) using single-crystal X-ray diffraction (SCXRD). These structures exhibited increasing corner-sharing connectivity with higher Sn content, revealing a previously unobserved relationship between metal composition and structural evolution in perovskitoid materials. The incorporation of Sn reduced the band gap (tunable from 2.51 eV to 1.87 eV) and drove structural transformations, a trend seen also in density functional theory (DFT) calculations, which suggest a thermodynamic preference for Pb at face-sharing sites and Sn at corner-sharing sites. DFT band structure calculations and optical spectroscopy also reveal an anomalous behavior in these materials, which we term polytypic band modulation. This phenomenon combines conventional band bowing with the structural transformations that occur as Sn content increases, as observed in the band gap and in photoluminescence spectra. Photodiodes fabricated from thin films of these materials exhibited stable and pronounced photoresponses across various light intensities over time. Furthermore, the combination of templating 3D perovskitoids with multiple cations and alloying Pb and Sn, suggests a vastly underexplored phase space that offers new parameters to tune perovskitoids.

Cations↗
DOE OSTI2020

Synthesis, Elasticity, and Spin State of an Intermediate MgSiO 3 -FeAlO 3 Bridgmanite: Implications for Iron in Earth's Lower Mantle

Fe-Al-bearing bridgmanite may be the dominant host for ferric iron in Earth's lower mantle. Here we report the synthesis of (Mg 0.5 Fe 3+ 0.5 )(Al 0.5 Si 0.5 )O 3 bridgmanite (FA50) with the highest Fe 3+ -Al 3+ coupled substitution known to date. X-ray diffraction measurements showed that at ambient conditions, the FA50 adopted the LiNbO 3 structure. Upon compression at room temperature to 18 GPa, it transformed back into the bridgmanite structure, which remained stable up to 102 GPa and 2,600 K. Fitting Birch-Murnaghan equation of state of FA50 bridgmanite yields V 0 = 172.1(4) Å 3 , K 0 = 229(4) GPa with K 0 ' = 4(fixed). Furthermore, the calculated bulk sound velocity of the FA50 bridgmanite is ~7.7% lower than MgSiO 3 bridgmanite, mainly because the presence of ferric iron increases the unit-cell mass by 15.5%. This difference likely represents the upper limit of sound velocity anomaly introduced by Fe 3+ -Al 3+ substitution. X-ray emission and synchrotron Mössbauer spectroscopy measurements showed that after laser annealing, ~6% of Fe 3+ cations exchanged with Al 3+ and underwent the high- to low-spin transition at 59 GPa. The low-spin proportion of Fe 3+ increased gradually with pressure and reached 17–31% at 80 GPa. Since the cation exchange and spin transition in this Fe 3+ -Al 3+ -enriched bridgmanite do not cause resolvable unit-cell volume reduction, and the increase of low-spin Fe 3+ fraction with pressure occurs gradually, the spin transition would not produce a distinct seismic signature in the lower mantle. However, it may influence iron partitioning and isotopic fractionation, thus introducing chemical heterogeneity in the lower mantle.

58 GEOSCIENCES↗
DOE OSTI2020

Disorder-Tunable ZnGeP2 for Epitaxial Top Cells on Si

There has been a longstanding search for top cell materials for Si-based tandems. ZnGeP 2 is one material that could fit this need. It is lattice matched to Si and has the potential for tuning its band gap at fixed lattice constant via cation ordering. In this study, we investigate the effects of growth and annealing conditions on the structure of ZnGeP 2 thin films. Films were deposited amorphous and then annealed ex-situ. Using low anneal temperatures or short anneal times, we were able to kinetically trap the disordered phase. We also found composition to play a role in the degree of ordering in our films. Our findings support the hypothesis that ZnGeP 2 could be implemented as a material with tunable properties at fixed lattice constant through cation ordering.

14 SOLAR ENERGY↗
DOE OSTI2021

Inversion, chemical complexity, and interstitial transport in spinels

Abstract Spinels with the generic chemical formula AB 2 O 4 have potential applications in nuclear energy and batteries. In both cases, their functionality is related to mass transport through the crystal. Here, using long‐time atomistic simulations, we examine the impact of the cation structure on interstitial transport in two spinel chemistries, inverse MgGa 2 O 4 and double MgAlGaO 4 . We emphasize two aspects of the transport properties: the unit mechanisms that are described by individual barriers, for which we introduce pole‐figure‐like plots, and the aggregate behavior of those unit mechanisms. Compared to previous work on normal spinels, we find that inversion significantly reduces the rate of interstitial transport in these structures and has an impact on the stability of defects as they move through the lattice. In particular, B cation interstitials are found to be kinetically stable only in the inverse MgGa 2 O 4 . These results provide new insight into relationship between structure, chemistry, and transport in spinels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Association between soil organic carbon and calcium in acidic grassland soils from Point Reyes National Seashore, CA

All data is collected from across 3 soil cores spanning a pH gradient at Point Reyes National Seashore, as part of a recent publication. The bulk data csv includes hygroscopic moisture content, soil pH, total C and N values, particle size distributions, cation exchange capacity and extractable cations. The STXM data package includes raw spectra data from scanning transmission X-ray microscopy C near-edge X-ray absorption fine structure spectroscopy analysis, extracted from STXM Image Reader analysis and then subsequently normalised in Athena (see details in paper). The data file also contains a bulk chemistry and mineralogy dataset, including total and trace element contents from 3 depths and mineral compositions as measured at BL 11-3 SSRL and semi-quantified in HighScore. Finally the final data file is calcium K-edge X-ray absorption near-edge structure spectroscopy (BL 4-3) and micro-XANES and micro-X-ray fluorescence (BL 14-3b) data.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Expeditious Coordination-Driven Construction of Hierarchically Nanoporous Barium Salts

Organic moieties-derived salts with permanent porosity and polarized channels have shown unique features and attractive performance in the field of adsorption, separation, and conduction. However, state-of-the-art organic salts generally rely on ionic interaction and hydrogen bonding formation to maintain the porous channels. The synthesis of organic moiety-derived salts with permanent accessible pores even after removal of the trapped guest molecules, and without the constraint of hydrogen bonding formation still remains a great challenge. Herein, we present an expeditious construction pathway to generate hierarchically nanoporous barium salts without hydrogen bonding formation. The strong ionic interaction of the barium cation and sulfonate anions led to rapid reaction equilibrium (~2 min), affording diverse barium-derived ionic polymer (Ba-IP) with permanent porosity and highly polarized channels. The produced Ba-IP materials with abundant cations and anions displayed high CO 2 /N 2 and CO 2 /CH 4 separation performance, with the selectivities reaching up to 89.5 and 280, respectively, at 273 K, surpassing most of the organic polymers functionalized by ionic moieties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Vegetation Warming Experiment: 15N Uptake Experiment Inorganic Nitrogen and Phosphorus on Resins, Utqiagvik (Barrow), Alaska, 2018

This dataset consists of inorganic ammonia, nitrate, and phosphate bound to anion and cation binding resins deployed from July through September 2018 in the surface soils of vegetation warming experiment enclosures and paired control plots. Vegetation warming chambers (Zero Power) were deployed on the Barrow Environmental Observatory (BEO), Utqiagvik, Alaska. These chambers (Figure 1) consistently elevated air temperatures by approximately 4°C using a self-venting system described by Lewin et al (2017). Five chambers were deployed from June 17, 2018 to September 24, 2018 on the BEO within a 1 km2 area centered on 71.275N, -156.641W. Each chamber was co-located with an ambient plot where temperatures were not manipulated on patches of tundra containing the target species Arctagrostis latifolia. An intensive field campaign in late July investigated the impact of warming had on A. latifolia biomass, chemistry, and uptake of 15N labeled ammonia that was injected into the surface soils for one week. Initial measurements were taken on July 21, 2018. Harvest occurred on July 27, 2018. Water-extractable nutrients in soils were measured in July following harvests of A. latifolia plants and underlying soils. Availability of ammonia, nitrate, and phosphate throughout the growing season was measured by extracting nutrients bound to anion and cation binding resins deployed from July through September. Environmental variables (thaw depth, surface soil temperatures, surface soil moisture) were measured. Leaf traits and root traits of A. latifolia were also measured. Included is one *.csv data file and one *.pdf user guide. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Investigation and Analysis of Dolomite Dissolution in Variable Strength Systems Relevant to the WIPP

The Waste Isolation Pilot Plant (WIPP) was opened in 1999 as a solution to the long-term disposal of the nation's nuclear defense-generated transuranic (TRU) waste. The salt beds were recommended as the ideal location because they are free from flowing fresh water, easily mined, impermeable, and geologically stable. However, for performance assessment modeling, release scenarios must be considered. The most likely release scenario was determined to be human intrusion leading to direct and/or long-term brine release (US DOE 1995, US DOE 1996, Perkins et al., 1999). The focus of this research is the Rustler formation because it is located above the WIPP and is the most transmissive layer (Perkins et al., 1999). Objective: To determine the effect of chelating ligands ( e.g. EDTA) on dissolution of dolomite in high ionic strength systems. Do brines impact dolomite dissolution and how is it affected by EDTA binding with cations? By varying the ionic strengths, different brine conditions can be simulated similar to those in and around the Culebra member and evaluate trends of dissolved Ca and Mg in the aqueous phase from the quantified data. Conclusions: <2% of dolomite dissolved over one week at pH 8.5. Greater dissolution occurred at higher ionic strength and in the presence of NaCl with approximately 0.4 vs. 0.9% of Mg removed from dolomite in 0.1 and 1.0 M Na. Further, 0.3 vs. 0.9% of Mg was removed from dolomite in 1.0 M IS CaCl{sub 2} versus NaCl. EDTA increased dissolution of dolomite at low ionic strength due to its strong complexation affinity for Ca/Mg with slightly greater removal of Ca than Mg. Significant differences were not observed at high ionic strength due to the presence of large concentrations of competing cations (Na, Ca, Mg). Slightly higher concentrations of Ca were removed from dolomite than Mg after one week, suggesting either incongruent dissolution or release through ion exchange of Ca from trace mineral impurities. Further, when EDTA was present, it may have increased Ca removal due to its greater complexation for Ca than Mg. Environmental Implications: High ionic strength brines and low ionic strength solutions with organic ligands increase dissolution of dolomite. Due to the long half-lives of radionuclides in the TRU waste, it may be important to consider the long term impact of dolomite dissolution for potential release scenarios.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Influence of Borate on Sorption of Strontium and Barium to Calcium Silicate Hydrate - 20148

Radioactive waste with the decommissioning process at the Fukushima Daiichi Nuclear Power Plant (FDNPP), contains borate with relatively high concentration. As with general low-level wastes, such waste is also assumed the solidification with cementitious materials which calcium silicate hydrate (C-S-H) is one of the main components. In this study, the sorption behavior of strontium (Sr) ions and barium (Ba) ions to C-S-H in the presence of borate was examined by the sorption experiments without drying process. In the sorption experiments, C-S-H was synthesized by the mixture of calcium oxide, fumed silica and a solution with setting the Ca/Si molar ratios to 0.4, 0.8, 1.2 and 1.6. The total amount of a solid phase was 1.5 g, and the total volume of the solution containing borate and adsorbed ions (Sr or Ba) was 30 mL. The concentration of borate was set to 0 M or 0.6 M and the sodium/boron (Na/B) ratios was set to 0.2 or 1.0 by mixing boric acid and sodium hydroxide. The concentration of Sr ions or Ba ions was adjusted to 1 mM. The sorption period was set to 7 days. In the results, the sorption ratios of Sr ions and Ba ions for C-S-H exceeded 80% under all experimental conditions, although the sorption competition of cations with Na ions and the inhibition of the C-S-H formation with generating borate compounds observed by Raman spectroscopy might slightly reduce the sorption of them. These suggest that cationic radionuclides will be immobilized by C-S-H contained in the cements even in the presence of borate. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Materials Design Directions for Solar Thermochemical Water Splitting

The sustainable, economical production of molecular hydrogen is a crucial component of a net zero-greenhouse-gas-emissions future. Solar thermochemical water splitting (STWS) offers a renewable route to hydrogen with the potential to help decarbonize several industries, including transportation, manufacturing, mining, metals processing, and electricity generation, as well as provide sustainable hydrogen as a chemical feedstock. STWS uses high temperatures generated from concentrated sunlight or other sustainable means for high-temperature heat to produce hydrogen and oxygen from steam. For example, in its simplest form of a two-step thermochemical cycle, a redox-active metal oxide is heated to ≈1700-2000 K, driving off molecular oxygen while producing oxygen vacancies in the material. The reduced metal oxide then cools (ideally with the extracted heat recuperated for re-use) and, in a separate step, comes into contact with steam, which reacts with oxygen vacancies to produce molecular hydrogen while recovering the original state of the metal oxide. Despite its promising use of the entire solar spectrum to split water thermochemically, the current estimated cost of hydrogen produced via STWS is ≈4-6× the U.S. Department of Energy (DOE) Hydrogen Shot target value of $1/kg. One contributing approach to bridging this cost gap is the design of new materials with improved thermodynamic properties to enable higher efficiencies. The state-of-the-art (SOA) redox-active metal oxide for STWS is ceria (CeO 2 ), due to its close to optimal, although too high, oxygen vacancy formation enthalpy and large configurational and electronic entropy of reduction. However, ceria requires high operating temperatures and its efficiency is insufficient. Therefore, efforts to increase the efficiency of STWS cycles have focused on further optimizing oxygen vacancy formation enthalpies and augmenting the reduction entropy via substitution or doping and materials discovery schemes. Examples of the latter include the perovskites BaCe 0.25 Mn 0.75 O 3 and (Ca,Ce)(Ti,Mn)O 3 . These efforts and others have revealed intuitive chemical principles for the efficient and systematic design of more effective materials, such as the strong correlation between the enthalpies of crystal bond dissociation and solid-state cation reduction with the enthalpy of oxygen vacancy formation, as well as configurational entropy augmentation via the coexistence of two or more redox-active cation sublattices. The purpose of this chapter is to prepare the reader with an up-to-date account of STWS redox-active materials, both the SOA and promising newcomers, as well as to provide chemically intuitive strategies for improving their cycle efficiencies through materials design – in conjunction with ongoing efforts in reactor engineering and gas separations – to reach the cost points for commercial viability. First, we will introduce the thermodynamics of STWS using a two-step, metal-oxide, thermochemical cycle with economics in mind. We also will compare the pros and cons of processes that do or do not involve phase changes. Second, we will describe the qualities that make ceria the SOA STWS redox-active material, as well as its limitations. Third, we will survey some of the most promising candidates to date in the search for materials to supplant ceria, emphasizing the post-ternary, metal-oxide-perovskite alloys. Lastly, we will enumerate and discuss the following materials design directions for STWS redox-active materials: crystal reduction potentials as a proxy for oxygen vacancy formation enthalpies, engineering the electronic and configurational entropy of reduction via f-shells and simultaneous redox, and vetting materials stability via temperature-dependent phase diagrams and melting-point prediction.

08 HYDROGEN↗
DOE OSTI2020

Identifying Photoinduced Dipolar Polarization and Orbit–Orbit Interaction between Excitons in Organic–Inorganic Hybrid Perovskites

Abstract Photoinduced polarization and orbit–orbit interaction are important issues in hybrid perovskites toward developing optoelectronic functionalities. This paper identifies that photoinduced polarization occurs in hybrid perovskites with mixed‐cation methylammonium (MA)/formamidinium (FA) (MA x FA (1− x ) PbI 3 ) by measuring bulk polarization at 1 MHz in a magnetic field. Interestingly, when the internal dipole moment is increased upon increasing the MA:FA ratio, the photoinduced dipolar polarization can be substantially enhanced, clarifying the controversial issue of whether photoexcitation can induce a dielectric polarization within dipolar polarization regime in hybrid perovskites. Furthermore, upon increasing photoinduced dipolar polarization, it is found that the intrinsic orbit–orbit interaction between excitons can be increased, revealed by monitoring photocurrent change (Δ J sc ) upon switching the photoexcitation between linear and circular polarizations. This presents that organic cations are directly involved in the orbit–orbit interaction within band structures. Clearly, the studies provide an insightful understanding of the dipole moment effects on photoinduced dipolar polarization and orbit–orbit interaction between excitons in hybrid perovskites toward controlling the optoelectronic properties.

Dou, Yixuan↗
DOE OSTI2021

Insight into the Solid Electrolyte Interphase Formation in Bis(fluorosulfonyl)Imide Based Ionic Liquid Electrolytes

The formation of the solid electrolyte interphase (SEI) in an ionic liquid electrolyte of 0.5 m lithium bis(fluorosulfonyl)imide (LiFSI) in 1-ethyl-3-methylimidazolium bis(fluorosulfonyl)imide at high cell voltages (1.7–1.9 V) is investigated in ordered mesoporous carbon (OMC) based Li metal cells using an operando small-angle neutron scattering (SANS) technique coupled with electrochemical impedance spectroscopy and ex situ X-ray photoelectron spectroscopy (XPS). It is demonstrated that discharging the OMC Li metal cells to ≈2 V and holding the cell voltage constant induces a rapid current increase with time, confirming extensive reduction and SEI formation. XPS analysis reveals that LiF is formed at open cell voltage (OCV), which is attributed to the carbenes generated at the lithium negative electrode because of its reaction with EMIm cation diffusing to and initiating the reaction with FSI - anions at the carbon positive electrode. It is confirmed that the chemical reaction at OCV and electrochemical reduction at high cell voltage of the FSI - anion plays a protective role against EMIm cation co-intercalation into the carbon positive electrode during the initial discharge. Operando SANS studies also suggest that slight differences occur in the surface composition and reaction mechanism as a function of cell voltage.

1-ethyl-3- methylimidazolium bis(fluorosulfonyl)im↗
DOE OSTI2021

Ion Pair Uptake in Ion Gel Devices Based on Organic Mixed Ionic–Electronic Conductors

Abstract In organic mixed ionic–electronic conductors (OMIECs), it is critical to understand the motion of ions in the electrolyte and OMIEC. Generally, the focus is on the movement of net charge during gating, and the motion of neutral anion–cation pairs is seldom considered. Uptake of mobile ion pairs by the semiconductor before electrochemical gating (passive uptake) can be advantageous as this can improve device speed, and both ions can participate in charge compensation during gating. Here, such passive ion pair uptake in high‐speed solid‐state devices is demonstrated using an ion gel electrolyte. This is compared to a polymerized ionic liquid (PIL) electrolyte to understand how ion pair uptake affects device characteristics. Using X‐ray photoelectron spectroscopy, the passive uptake of ion pairs from the ion gel into the OMIEC is detected, whereas no uptake is observed with a PIL electrolyte. This is corroborated by X‐ray scattering, which reveals morphological changes to the OMIEC from the uptake of ion pairs. With in situ Raman, a reorganization of both anions and cations is then observed during gating. Finally, the speed and retention of OMIEC‐based neuromorphic devices are tuned by controlling the freedom of charge motion in the electrolyte.

Quill, Tyler J.↗
DOE OSTI2022

Investigating Particle Size‐Dependent Redox Kinetics and Charge Distribution in Disordered Rocksalt Cathodes

Abstract Understanding how various redox activities evolve and distribute in disordered rocksalt oxides (DRX) can advance insights into manipulating materials properties for achieving stable, high‐energy batteries. Herein, the authors present how the reaction kinetics and spatial distribution of redox activities are governed by the particle size of DRX materials. The size‐dependent electrochemical performance is attributed to the distinct cationic and anionic reaction kinetics at different sizes, which can be tailored to achieve optimal capacity and stability. Overall, the local charged domains in DRX particles display random heterogeneity caused by the isotropic delithiation pathways. Owing to the kinetic limitation, the micron‐sized particles exhibit a holistic “core‐shell” charge distribution, whereas sub‐micron particles show more uniform redox reactions throughout the particles and ensembles. Sub‐micron DRX particles exhibit increasing anionic redox activities yet inferior cycling stability. In summary, engineering particle size can effectively modulate how cationic and anionic redox activities evolve and distribute in DRX materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Benzimidazole Based Hole‐Transporting Materials for High‐performance Inverted Perovskite Solar Cells

Abstract Interfaces play a decisive role in perovskite solar cells’ power conversion efficiency and their long‐term durability. Small‐molecule hole‐transporting materials (HTMs) have grabbed enormous attention due to their structural flexibility, material properties, and stabilities, allowing for improved operational durability in perovskite photovoltaics. This study synthesizes and investigates a new class of benzimidazole‐based small molecules, named YJS001 and YJS003 , serving as the HTMs to enable high‐efficiency mixed‐cation mixed‐halide perovskite solar cells. The benzimidazole‐based materials are dopant‐free HTMs composed of donor and acceptor building blocks that are designed to engineer the energy level alignment near the HTM/perovskite interface. Mixed‐cation mixed‐halide perovskites can be grown uniformly on both HTMs with large crystalline grains. It is discovered that the donor‐rich YJS003 ‐based solar cell exhibits a high open‐circuit voltage of 1.09 V with a champion power conversion efficiency of over 20%. Power‐dependent current–voltage characteristics of the solar cells are analyzed, from which the high performance of YJS003's excellent hole mobility and well‐aligned energy level is attributed. This work introduces a new class of benzimidazole‐based small molecules as HTMs, that paves the path for dopant free interface material development for commercialization of perovskite solar cells.

14 SOLAR ENERGY↗
DOE OSTI2022

Structural Damage and Recrystallization Response of Garnet Crystals to Intense Electronic Excitation

Here, the susceptibility to irradiation-induced damage, the fundamental mechanism of the relaxation kinetics, and the corresponding recrystallization effect related to the cation radius ratio are comprehensively investigated for Y 3 Al 5 O 12 and Gd 3 Ga 5 O 12 garnet crystals under 645 MeV Xe 35+ irradiation with different fluences of 5 × 10 11 –3 × 10 12 ions cm –2 . Regarding different lattice distortion and swelling levels, the observed microstructure transformations to disordered and amorphous phases, and corresponding hillock dimensions, consistently confirm that Gd 3 Ga 5 O 12 has a higher susceptibility to radiation damage than Y 3 Al 5 O 12 . Combined with iTS model calculations, although Y 3 Al 5 O 12 has higher atomic temperature and energy deposition than Gd 3 Ga 5 O 12 under the same ion velocity and electronic energy loss, the relatively high thermal conductivity and specific heat coefficient of Y 3 Al 5 O 12 crystals enhance the conduction and dissipation of deposition energy, and Gd 3 Ga 5 O 12 , with a higher cation-radius-ratio (r A /r B ), is more easily damaged to amorphous phase due to the less favorable kinetics of ordering and recovery of a melted track region to the crystalline phase. Additionally, the significant bandgap modification in spectral ranges of 5.88–6.75 eV for Y 3 Al 5 O 12 and 4.83–5.41 eV for Gd 3 Ga 5 O 12 , and the enhancement of defect-assisted-related luminescence are achieved, providing a basis to design novel optoelectronic devices in microelectronics fields.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Enhanced Optical Contrast and Switching in Near‐Infrared Electrochromic Devices by Optimizing Conjugated Polymer Oligo(Ethylene Glycol) Sidechain Content and Gel Electrolyte Composition

Abstract A detailed investigation addressing the effects of functionalizing conjugated polymers with oligo(ethylene glycol) (EG n ) sidechains on the performance and polymer‐electrolyte compatibility of electrochromic devices (ECDs) is reported. The electrochemistry for a series of donor‐acceptor copolymers having near‐infrared (NIR)‐optical absorption, where the donor fragment is 3,4‐ethylenedioxythiophene (EDOT) or an EG n functionalized bithiophene (g2T) and the acceptor fragment is diketopyrrolopyrrole (DPP) functionalized with branched alkyl or EG n sidechains, is extensively probed. ECDs are next fabricated and it is found that EG n sidechain incorporation must be finely balanced to promote polymer‐electrolyte compatibility and provide efficient ion exchange. Proper electrolyte‐cation pairing and polymer structural tuning affords a 2x increase in optical contrast (from 12% to 24%) and >60x reduction in switching time (from 20 to 0.3 s). Atomic force microscopy (AFM)/grazing incidence wide‐angle X‐ray scattering (GIWAXS) characterization of the polymer film morphology/microstructure reveals that an over‐abundance of EG n sidechains generates large polymer crystallites, which can suppress ion exchange. Lastly, time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) indicates sidechain/electrolyte identity does not influence the electrolyte penetration depth into the films, and EG n sidechain inclusion increases electrolyte cation uptake. The material structural design insight and guidelines regarding the polymer‐electrolyte ion insertion/expulsion dynamics reported here should be of significant utility for developing next‐generation mixed ionic‐electronic conducting materials.

Chemistry↗
DOE OSTI2020

Low Current and Analog Memristor with Ru as Mobile Species

The switching parameters and device performance of memristors are predominately determined by their mobile species and matrix materials. Devices with oxygen or oxygen vacancies as the mobile species usually exhibit a great retention but also need a relatively high switching current (e.g., >30 mu A), while devices with Ag or Cu as cation mobile species do not require a high switching current but usually show a poor retention. Here, Ru is studied as a new type of mobile species for memristors to achieve low switching current, fast speed, good reliability, scalability, and analog switching property simultaneously. An electrochemical metallization-like memristor with a stack of Pt/Ta2O5/Ru is developed. Migration of Ru ions is revealed by energy-dispersive X-ray spectroscopy mapping and in situ transmission electron microscopy within a sub-10 nm active device area before and after switching. The results open up a new avenue to engineer memristors for desired properties.

analog switching↗