Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “breakdown”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Behavior of ion-implanted junction diodes in 3C SiC

p-n junction diodes have been formed by ion implantation of B or Al in 3C SiC and annealing at 1365 C. The current-voltage characteristics of the Al-implanted structures show little rectification. The B-implanted diodes show rectification, with ideality factors of 2.2 and higher, breakdown voltages between 5 and 10 V, and a series resistance of the order of 20 kohm. The current-voltage characteristics were measured between room temperature and 270 C. The extracted ideality factors increase with temperature.

Avila, R. E.↗

Numerical simulation of three-dimensional unsteady vortex flow using a compact vorticity-velocity algorithm

A numerical algorithm is presented which is used to solve the unsteady, fully three-dimensional, incompressible Navier-Stokes equations in vorticity-velocity variables. A discussion of the discrete approximation scheme is presented as well as the solution method used to solve the resulting algebraic set of difference equations. Second order spatial and temporal accuracy is verified through solution comparisons with exact results obtained for steady three-dimensional stagnation point flow and unsteady axisymmetric vortex spin-up. In addition, results are presented for the problem of unsteady bubble-type vortex breakdown with emphasis on internal bubble dynamics and structure.

Gatski, T. B.↗

Stressed photoconductive detector for far-infrared space applications

An optimized leaf-spring apparatus for applying uniaxial stress to a Ge:Ga far-IR photoconductor has been designed and tested. This design has significant advantages for space applications which require high quantum efficiency and stable operation over long periods of time. The important features include adequate spring deflection with relatively small overall size, torque-free stress, easy measurement of applied stress, and a detector configuration with high responsivity. One-dimensional arrays of stressed photoconductors can be constructed using this design. A peak responsivity of 38 A/W is achieved in a detector with a cutoff wavelength of 200 microns, which was operated at a temperature of 2.0 K and a bias voltage equal to one-half of the breakdown voltage.

Wang, J.-Q.↗

Psychiatric Components of a Health Maintenance Facility (HMF) on Space Station

The operational psychiatric requirements for a comprehensive Health Maintenance Facility (HMF) on a permanently manned Space Station are examined. Consideration is given to the psychological health maintenance program designed for the diagnosis of mental distress in astronauts during flight and for prevention of mental breakdown. The types of mental disorders that can possibly affect the astronauts in flight are discussed, including various organic, psychotic, and affective mental disorders, as well as anxiety, adjustment, and somatoform/dissociative disorders. Special attention is given to therapeutic considerations for psychiatric operations on Space Station, such as restraints, psychopharmacology, psychotherapy, and psychosocial support.

Patricia A Santy↗

A natural low frequency oscillation in the wake of an airfoil near stalling conditions

An unusually low frequency oscillation in the flow over an airfoil was explored experimentally. Wind tunnel measurements were carried out with a two dimensional airfoil model at a chord Reynolds number of 100,000. During deep stall the usual bluff-body shedding occurred at a Strouhal number. But at the onset of stall a low frequency periodic oscillation occurred, the corresponding Strouhal number being an order of magnitude lower. The phenomenon occurred in relatively unclean flow when the freestream turbulence was raised to 0.4 percent, but did not in the cleaner flow with turbulence intensity of 0.1 percent. It could also be produced by certain high frequency acoustic excitation. Details of the flow field are compared between a case of low frequency oscillation at alpha = 15 deg and a case of bluff-body shedding at alpha = 22.5 deg. The origin of the low frequency oscillation traces to the upper surface of the airfoil and is seemingly associated with the periodic formation and breakdown of a large separation bubble. The intense flow fluctuations impart significant unsteady forces to the airfoil but diminish rapidly within a distance of one chord from the trailing edge.

Zaman, K. B. M. Q.↗

Gigarad-tolerant power switches and memory elements

A new class of silicon devices operating without p-n junctions has been studied for radiation hardness. The electric field in these devices is uniform over most of the device, thus causing high-voltage breakdown to increase with electrode spacing. Deep acceptor levels are created in the silicon by diffusing gold atoms into the lattice, or by electron radiation. These acceptor levels, near the center of the band gap, trap out electrons so that the low resistivity of the n-type doped wafer can be raised to intrinsic resistivity. Switching between a high-resistivity state at low currents and a low-resistivity state at high currents occurs at a definite threshold voltage, exhibiting characteristics similar to silicon-controlled rectifiers. Compensating 0.1 ohm-meter (10 ohm-cm) silicon wafers requires electron fluxes of 10 to the 23rd electrons per square meter (10 to the 19th electrons per square centimeter). Experiments demonstrating gamma tolerance to 1 Gigarad(Si) are described. Calculations for maximum tolerable neutron fluence are shown, and a phenomenological explanation for these results is presented.

Joyner, W. T.↗

Computer aided indexing at NASA

The application of computer technology to the construction of the NASA Thesaurus and in NASA Lexical Dictionary development is discussed in a brief overview. Consideration is given to the printed and online versions of the Thesaurus, retrospective indexing, the NASA RECON frequency command, demand indexing, lists of terms by category, and the STAR and IAA annual subject indexes. The evolution of computer methods in the Lexical Dictionary program is traced, from DOD and DOE subject switching to LCSH machine-aided indexing and current techniques for handling natural language (e.g., the elimination of verbs to facilitate breakdown of sentences into words and phrases).

Buchan, Ronald L.↗

Dicarboxylic acids generated by thermal alteration of kerogen and humic acids

Significant amounts (up to 2 percent of organic geopolymers) of low-molecular-weight (LMW) dicarboxylic acids (C2-C10) have been detected during thermal alteration (270 C, 2 h) of kerogens and humic acids isolated from young or ancient lithified sediments. Their distribution is characterized by the predominance of oxalic acid followed by succinic, fumaric, and methylsuccinic acids. These acids are probably released by the breakdown of macromolecular structures, which have incorporated biogenic organic compounds, including diacids, during early digenesis in sediments. Because of their reactivity, LMW diacids may play geochemically important roles under natural conditions.

Kawamura, Kimitaka↗

Plasma deposition of amorphous hydrogenated carbon films on III-V semiconductors

Amorphous hydrogenated carbon films were grown on GaAs, InP and fused silica substrates using plasmas generated from hydrocarbon gases. Methane and n-butane sources were utilized. The effects of flow rate and power density on film growth were investigated. Carbon was the major constituent in the films. The degree of asymmetry at the carbon-semiconductor interface was approximately independent of the power density. Different H-C bonding configurations were detected by the technique of secondary-ion mass spectrometry. Band gaps up to 3 eV were obtained from optical absorption studies. Breakdown strengths as high as 600 MV/m were measured.

Pouch, John J.↗

Three-dimensional stability of boundary layers

The most recent efforts on the stability and transition of three-dimensional flows are reviewed. These include flows over swept wings, rotating disks, rotating cones, yawed bodies, corners, and attachment lines. The generic similarities of their stability behavior is discussed. It is shown that the breakdown process is very complex, often leading to contradictory results. Particular attention is paid to opposing observations of stationary and traveling wave disturbances.

Saric, William S.↗

Visualization techniques for studying high angle of attack separated vortical flows

Flow visualization techniques can provide information on high angle of attack separated flows around slender aircraft configurations that may be unobtainable otherwise. At large angles of attack the flow field is dominated by vortical structures originating on the forebody wing extension, wing and forward control surfaces. Several techniques that are suitable for tracking vortices in subsonic wind tunnels are introduced. A discussion of visualization photographs and quantitative data obtained from visualization studies on vortex trajectory and breakdown position on both static and dynamic wind tunnel models is presented.

Nelson, Robert C.↗

Navier Stokes computation of the flow field over delta wings with spanwise leading edge blowing

The concept of spanwise leading edge blowing, a means of controlling the position and strength of leading edge vortices, is analyzed by numerical solutions of the three-dimensional Thin-Layer Navier Stokes equations. The leading edge jet is simulated by defining a permeable boundary, corresponding to the jet slot, where suitable boundary conditions are implemented. Numerical results agree favorably with experimental measurements. It is found that the use of spanwise leading edge blowing not only magnifies the size and strength of the leading edge vortices, but also moves the vortex cores outboard and upward. As a result, the increase in lift comes primarily from the greater nonlinear vortex lift. The presence of the leading edge jet stream displaces the flow outboard, thereby increasing the effective aspect ratio of the delta wing. However, blowing causes earlier vortex breakdown, thus decreasing the stall angle.

Yeh, David T.↗

Navier-Stokes computation of flow around a round-edged double-delta wing

Computations of three-dimensional vortical flows over a thin round-edged double-delta wing with an aspect ratio of 2.05 are performed using an implicit upwind-relaxation finite-difference scheme. The effects of grid and angle of attack on the Navier-Stokes computations are studied. Coarse-grid calculations can not predict the detailed structures of the vortical flowfields for lack of grid resolution. On the contrary, fine-grid computations show that key features of vortex formation, interaction, and breakdown are simulated. Furthermore, computed lift coefficients and spanswise surface static pressure distributions are in good agreement with the experimental data up to alpha = 25 deg.

Hsu, C.-H.↗

Electron density-sensitive line ratios for Fe XII in the solar corona

The collision strengths for electron-impact excitation of fine-structure transitions from the ground 3s23p3 configuration to the excited 3s3p4 configuration in Fe XII are presented. These are calculated by transforming the K-matrices obtained in a nonrelativistic R-matrix method to K-matrices in intermediate coupling using term-coupling coefficients which take into account the effect of breakdown of target LS coupling. Extensive configuration-interaction wave functions are used to represent the target states. The effective collision strengths are determined assuming a Maxwellian distribution of electron energies. Rydberg series of resonances converging to the excited state thresholds are explicitly included in the calculation. The relative level populations and emission-line strengths for Fe XII are calculated using the new atomic data presented in this paper and that published by Tayal, Henry, and Pradhan (1987) and Tayal and Henry (1986) over a wide range of electron densities and temperatures (1-2 x 10 to the 6th K). Present results for collision strengths and emission-line strengths are compared with the previous calculation of Flower (1977). Some significant differences are noted.

Tayal, S. S.↗

Numerical simulation of nonlinear interactions in channel and boundary-layer transition

The basic numerical techniques used for the direct simulation of transition to turbulence are described. Applications are presented for the computation of finite amplitude, two-dimensional steady states, the simulation of the secondary instability of channels and boundary-layers, and the simulation of the breakdown of detached shear layers.

Zang, T. A.↗

The nonlinear interaction of Tollmien-Schlichting waves and Taylor-Goertler vortices in curved channel flows

The development of Tollmien-Schlichting waves (TSWs) and Taylor-Goertler vortices (TGVs) in fully developed viscous curved-channel flows is investigated analytically, with a focus on their nonlinear interactions. Two types of interactions are identified, depending on the amplitude of the initial disturbances. In the low-amplitude type, two TSWs and one TGV interact, and the scaled amplitudes go to infinity on a finite time scale; in the higher-amplitude type, which can also occur in a straight channel, the same singularity occurs if the angle between the TSW wavefront and the TGV is greater than 41.6 deg, but the breakdown is exponential and takes an infinite time if the angle is smaller. The implications of these findings for external flow problems such as the design of laminar-flow wings are indicated. It is concluded that longitudinal vortices like those observed in the initial stages of the transition to turbulence can be produced unless the present interaction mechanism is destroyed by boundary-layer growth.

Hall, P.↗

Radiometric calibration analysis of SIR-B imagery

The second flight of the NASA Spaceborne Imaging Radar (SIR-B) collected nearly 8 hours of digital synthetic-aperture radar (SAR) data of the earth's surface. This paper analyzes the performance of the SAR to determine the accuracy of the relative radiometric calibration of these data. Procedures are presented for deriving accuracy estimates as well as limitations under which these estimates are valid. The impact on calibration of an RF breakdown in the primary antenna feed system cable is evaluated. An analysis of the platform stability based on the SAR echo data is also presented in conjunction with its resultant effect on the calibration accuracy. Finally, numerical error bounds are derived with guidelines on their utilization.

Wall, Stephen D.↗

Direct drag measurement on thin-element riblets with suction and blowing

Turbulent, direct drag has been measured for a series of riblet models in air with continuous, low-level suction or blowing applied through narrow streamwise slots located at the peak, base, or valley of the rectangularly shaped riblets. Riblet spacing was approximately that of low-speed wall streaks. The models were designed to test whether wall vortices which are known to occur along widely spaced riblets are integral to turbulence production by attempting to alter them with localized suction or blowing. The drag data show trends that are consistent with reduced or enhanced inflectional breakdown of wall vortices. The trends, however, may also be explained by more fundamental mean-flow effects.

Wilkinson, Stephen P.↗