Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “binder”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Microstructure Characterization and Modeling for Improved Electrode Design

As part of DOE's Computer-Aided Engineering of Batteries Program, the National Renewable Energy Laboratory is developing detailed models capturing the influence of lithium-ion battery electrode design, recipe and processing on the electrode's microstructure and relating that microstructure to device-level performance. Given the difficulty in obtaining 3D microstructural images of the electrode's inert components, team member Purdue University developed an algorithm to computationally generate the so-called carbon-binder domain (CBD) for any given recipe. Mesoscale models explore the device-level impact of the CBD phase on multiple idealized and actual electrode geometries. With the inclusion of this CBD phase, microstructure models are used to predict the tortuosity of 14 different graphite and NMC electrode designs. Tortuosity predictions are shown in good agreement with experimental direct measurement and electrochemical rate studies.

25 ENERGY STORAGE↗

Effect of carbon content on the microstructure and mechanical properties of superfine Ti(C, N)-based cermets

As a new kind of tool materials which appeared in the seventies last century, the Ti (C, N)-based cermets have been widely used in recent years due to many of its good properties. The microstructure of Ti(C, N)-based cermets with various carbon content were studied using scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX) and X-ray diffractometry (XRD). Vickers hardness and transverse rupture strength (TRS) were also measured. An increased carbon content resulted in the finer grain size, decreased solution strength of tungsten and molybdenum in the binder phase, and a higher volume fraction of heavy (Ti, Mo, W)(C,N) cores. If the addition of carbon content is too little or too much, the phase composition of material will deviate from the normal dual phase section and lead to the formation of the third phase: {eta}-phase if the carbon content is too low or dissociative carbon if the carbon content is too high. And the formation of the third phase will remarkably deteriorate the mechanical properties of cermets.

36 MATERIALS SCIENCE↗

Evaluation of sulfidic mine tailings solidified/stabilized with cement kiln dust and fly ash to control acid mine drainage

In the present research, industrial byproducts, namely, cement kiln dust (CKD) and Class C fly ash (FAC) have been used as candidate materials along with the partial addition of sulfate-resistant cement (SRC) in the Stabilization/solidification of polymetallic sulfidic mine tailings (MT). The effectiveness of S/S was assessed by comparing laboratory experimental values obtained from unconfined compressive strength, hydraulic conductivity and leaching propensity tests of S/S samples with regulatory standards for safe surface disposal of such wastes. Despite general regulatory compliance of compressive strength and hydraulic conductivity, some solidified/stabilized-cured matrices were found unable to provide the required immobilization of pollutants. Solidified/stabilized and 90-day cured mine tailings specimens made with composite binders containing (10% CKD + 10% FAC), (5% SRC + 15% FAC) and (5% SRC + 5% CKD + 10% FAC) significantly impaired the solubility of all contaminants investigated and proved successful in fixing metals within the matrix, in addition to achieving adequate unconfined compressive strength and hydraulic conductivity values, thus satisfying USEPA regulations. Laboratory investigations revealed that, for polymetallic mining waste, leachate concentrations are the most critical factor in assessing the effectiveness of S/S technology.

01 COAL, LIGNITE, AND PEAT↗

Stabilization/Solidification of Tritiated Water - 20135

Tritiated water was stabilized/solidified by using calcium oxide and a polymer. First, tritiated water was changed into the powder form of calcium hydroxide by addition of tritiated water into calcium oxide. Then the produced calcium hydroxide was solidified in waste form by using a polymer binder. The specimens of waste form prepared by surrogate calcium hydroxide were subjected to compressive strength testing and water immersion testing. In addition, the specimens of waste form prepared by tritiated calcium hydroxide were subjected to leach testing. The mean compressive strength of the specimens containing 40 wt % of the surrogate calcium hydroxide was about 98.5 MPa (14,300 psi). After water immersion testing, there was no distinct change in the appearance of the specimens. The mean compressive strength of the specimens after water immersion was 79.1 MPa (11,470 psi). The mean diffusion coefficient of tritium for the specimens containing 40 wt% of tritiated calcium hydroxide was 5.4 x 10-10 cm{sup 2}/s. These findings indicate that the waste form has enough mechanical integrity and durability for final disposal and releases tritium very slowly. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

State of Innovation 2025: Progress in Accelerating Next-Generation Cement and Concrete Technologies

The cement and concrete sectors are entering a decisive period as next-generation technologies advance from laboratory research to demonstration, early deployment, and first-of-a-kind commercial plants. Building on the 2024 State of Innovation report, the 2025 outlook highlights both the rapid acceleration of innovation and the urgent need for coordinated action across the value chain. Venture capital activity into the cement and concrete space stabilized following the record surge of 2022-2023, yet landmark financings, such as Sublime Systems' $200 million round and Terra CO2's $124 million Series B, signal continued investor confidence in companies approaching commercialization. Corporate procurement has become a powerful new catalyst, with Microsoft, Amazon, and CRH (Cement Roadstone Holdings) Ventures providing long-term commitments that underpin the first wave of next-generation cementitious products. The sector is shifting from early-stage experimentation toward the scaling of well-capitalized leaders capable of bridging the critical "capitalization gap." Early innovators continue to expand the toolkit through novel binders, electrochemical cements, biogenic limestone, and carbonate mineralization pathways. Going into 2026, cost competitiveness, durability validation, and scalability enabled by resilient supply chains remain the decisive factors for market adoption. At the 2025 Next Generation Cement and Concrete Critical Technologies Meeting, attendees emphasized dual-track funding strategies that integrate federal grants with private capital as key to enabling market breakthrough. State programs and corporate demand are sustaining momentum, while successful companies increasingly demonstrate both economic value and reduced dependence on imported materials. The National Concrete Pavement Technology Center and others underscored that broad integration of next-generation materials will hinge on standards compatibility, verified field performance, and workforce readiness. Colorado continues to serve as a proving ground through pilot programs that combine supplier training, phased implementation, and real-world data to de-risk innovation and provide replicable models for other regions. The 2025 Cement and Concrete Critical Technologies Workshop reinforced that scaling next-generation materials will require alignment among technology innovation, performance validation, and market demand. Stakeholders must move beyond siloed efforts toward collaborative frameworks that coordinate standards, funding, and infrastructure deployment. As a neutral convener and technical validator, the National Laboratory of the Rockies (NLR) plays a pivotal role in bridging innovation and market adoption through collaborative research, technology validation, and entrepreneurship programs. By uniting innovators, incumbents, policymakers, contractors, and investors, NLR and its partners are helping chart a credible pathway toward widespread commercialization in the decade ahead.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

PBXN-9 Ignition Kinetics and Deflagration Rates

The ignition kinetics and deflagration rates of PBXN-9 were measured using specially designed instruments at LLNL and compared with previous work on similar HMX based materials. Ignition kinetics were measured based on the One Dimensional Time-to-Explosion combined with ALE3D modeling. Results of these experiments indicate that PBXN-9 behaves much like other HMX based materials (i.e. LX-04, LX-07, LX-10 and PBX-9501) and the dominant factor in these experiments is the type of explosive, not the type of binder/plasticizer. In contrast, the deflagration behavior of PBXN-9 is quite different from similar high weight percent HMX based materials (i.e LX-10, LX-07 and PBX-9501). PBXN-9 burns in a laminar manner over the full pressure range studied (0-310 MPa) unlike LX-10, LX-07, and PBX-9501. The difference in deflagration behavior is attributed to the nature of the binder/plasticizer alone or in conjunction with the volume of binder present in PBXN-9.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formulation and Mechanical Properties of LLM-105 PBXs

Eight different polymer binders were formulated with bimodal distributions of 2,6-diamino-3,5-dinitropyrazine-1-oxide (LLM-105) in 5/95 weight ratio of polymer to explosive at the 25 gram level. The polymers evaluated included: Kel-F 800, Viton A, Oxy 461, Cytop A, Hyflon AD 60, Hytemp 5545, Technoflon PFR 91 and Technoflon P 459. LLM-105 had an average particle size of 35.6 {+-} 0.6 {micro}m. This material was ground in a ball mill for 24 h to achieve a particle size of 0.72 {+-} 0.02 {micro}m. Small angle light scattering measurements were used to obtain particle size distributions on both ground and unground LLM-105. Optical microscopy was used to characterize the morphology of the crystals. Bimodal mixes of approximately 75/25% coarse to fine LLM-105 were used in all formulations. Cylinders 1.27 cm diameter by 2.54 cm long were compression molded using 3 three-minute cycles at 105 C, except in the case of Cytop and Hyflon formulations which were molded at {approx}130 C. Densities varied between 94-98% of theoretical maximum. Stress strain measurements were made in compression at -30, ambient and 74 C at a strain rate of 0.0001 sec{sup -1}. As expected, the mechanical strength scaled with temperature depending on the glass transition temperature of the polymer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

RHEOLOGICAL PROPERTIES & MOLECULAR WEIGHT DISTRIBUTIONS OF FOUR PERFLUORINATED THERMOPLASTIC POLYMERS

Dynamic viscosity measurements and molecular weight estimates have been made on four commercial, amorphous fluoropolymers with glass transitions (Tg) above 100 C: Teflon AF 1600, Hyflon AD 60, Cytop A and Cytop M. These polymers are of interest as binders for the insensitive high explosive 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) because of their high density and Tg above ambient, but within a suitable processing range of TATB. As part of this effort, the rheological properties and molecular weight distributions of these polymers were evaluated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Towards Next Generation TATB-based Explosives by Understanding Voids and Microstructure from 10 nm to 1 cm

TATB-based explosives have been investigated on length scales spanning several orders of magnitude, from just under 10 nm to larger than 1 cm. This has been accomplished using a combination of ultra-small angle x-ray scattering (USAXS), ultra-small angle neutron scattering (USANS), and x-ray computed tomography (XRCT). USAXS determines distributions the smallest structures including hot-spot voids from hundreds of nanometers to a few microns, USANS extends this range to about 10 microns, and two variants of XRCT cover sizes from microns to centimeters. Several examples are presented for LX-17, a triaminotrinitrobenzene based plastic bonded explosive using Kel-F 800. As an extension of previous USAXS results, in these proceedings, an alternate binder results in a more uniform microstructure for the PBX, useful towards design of next-generation TATB-based explosives. These data are an important step to understanding microstructural mechanisms that affect the mechanical properties of TATB-based explosives, and provide complete a comprehensive characterization of the structure of LX-17 from nanometers to centimeters that can be used as empirical input to computational models of detonation, and in determining the relationship between voids and microstructure to detonation properties.

36 MATERIALS SCIENCE↗

NOVEL SPINEL-FAMILY REFRACTORIES FOR HIGH-TEMPERATURE, HIGH-ALKALINE ENVIRONMENTS

Currently available refractory materials are often limited in their application by many factors including chemical attack, mechanical degradation, temperature limitations, and installation or repair issues. Additionally, there are energy losses associated with the above considerations as well as environmental impacts. The research objectives of this project are to develop innovative refractory compositions based on the spinel crystal structure utilizing novel aggregates, binder systems (bonds), methods of phase formation, and refractory application systems. Efforts to this end and results to date are discussed.

36 MATERIALS SCIENCE↗

Time-resolved studies of particle effects in laser ablation inductively coupled plasma-mass spectrometry

Time resolved signals in laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) are studied to determine the influence of experimental parameters on ICP-induced fractionation effects. Differences in sample composition and morphology, i.e., ablating brass, glass, or dust pellets, have a profound effect on the time resolved signal. Helium transport gas significantly decreases large positive signal spikes arising from large particles in the ICP. A binder for pellets also reduces the abundance and amplitude of spikes in the signal. MO{sup +} ions also yield signal spikes, but these MO{sup +} spikes generally occur at different times from their atomic ion counterparts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Propagation of Reactions in Thermally-damaged PBX-9501

A thermally-initiated explosion in PBX-9501 (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine) is observed in situ by flash x-ray imaging, and modeled with the LLNL multi-physics arbitrary-Lagrangian-Eulerian code ALE3D. The containment vessel deformation provides a useful estimate of the reaction pressure at the time of the explosion, which we calculate to be in the range 0.8-1.4 GPa. Closely-coupled ALE3D simulations of these experiments, utilizing the multi-phase convective burn model, provide detailed predictions of the reacted mass fraction and deflagration front acceleration. During the preinitiation heating phase of these experiments, the solid HMX portion of the PBX-9501 undergoes a {beta}-phase to {delta}-phase transition which damages the explosive and induces porosity. The multi-phase convective burn model results demonstrate that damaged particle size and pressure are critical for predicting reaction speed and violence. In the model, energetic parameters are taken from LLNL's thermochemical-kinetics code Cheetah and burn rate parameters from Son et al. (2000). Model predictions of an accelerating deflagration front are in qualitative agreement with the experimental images assuming a mode particle diameter in the range 300-400 {micro}m. There is uncertainty in the initial porosity caused by thermal damage of PBX-9501 and, thus, the effective surface area for burning. To better understand these structures, we employ x-ray computed tomography (XRCT) to examine the microstructure of PBX-9501 before and after thermal damage. Although lack of contrast between grains and binder prevents the determination of full grain size distribution in this material, there are many domains visible in thermally damaged PBX-9501 with diameters in the 300-400 {micro}m range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NOVEL SPINEL-FAMILY REFRACTORIES FOR HIGH-TEMPERATURE, HIGH-ALKALINE ENVIRONMENTS

Many factors often limit the application of currently available refractory materials. Such factors may include chemical attack, mechanical degradation, temperature limitations, and installation or repair issues. Additionally, energy losses may be associated with the above considerations as well as environmental impacts. The research objectives of this project are to develop innovative refractory compositions based on the spinel crystal structure or advanced alumino-silicate systems utilizing novel aggregates, binder systems (bonds), methods of phase formation, and refractory application systems. Efforts to this end and results to date are discussed along with future plans for industrial validation trials.

36 MATERIALS SCIENCE↗

Chapter 13: Conversion of Terpenes to Chemicals and Related Products

Terpenes and terpenoids, hydrocarbons present in many types of biomass, havean extensive history of use as fuels, binders, polymers, pharmaceuticals and therapeutics, flavors, and fragrances. The structure of terpenes and terpenoids makes them amenable for use as a feedstock for catalytic conversion to other materials and also useful in their own right in the pharmaceutical, polymer, fuel, and chemical industries. There are many other plants and animals that produce terpenes that are present in extractable oils, most of which are used raw or as feedstocks for catalytic conversion to other materials in the fine chemical, flavor, and fragrance industry. This chapter discusses the sources, isolation and the catalytic methods for conversion of terpenes to fine chemicals and materials. Processes used to obtain turpentine are also discussed. The conversion of terpenes to resins, polymers, and other chemicals and materials is the focus of a wide variety of catalysis and materials research.

27 ARPA - Advanced Research Projects Agency-Energy↗

Sintering-based Metal Additive Manufacturing Methods for Magnetic Materials

In this chapter, we review the relationship between solid-state sintering and additive manufacturing (AM) methods for fabricating soft and hard magnetic materials. Heat treatment as a post-processing method has been done in conjunction with AM as a method to improve density and/or mechanical properties. In binder jetting (BJT) of metal powders, sintering is a crucial post-processing step and is necessary for obtaining the final product. This is because the parts are only in the “green” state when they leave the BJT printer, with poor mechanical properties and high porosity. Sintering densifies and strengthens the green part into the final product. A potential industrial application for sintering-based AM is the fabrication of magnetic materials. The motivation for doing so, the process and properties of the AM magnets, and the potential applications of post-sintered AM magnets are explored.

Wang, Haobo↗

Hard-Soft Composite Carbon as a Long-Cycling and High-Rate Anode for Potassium-Ion Batteries

There exist tremendous needs for sustainable storage solutions for intermittent renewable energy sources, such as solar and wind energy. Thus, systems based on Earth-abundant elements deserve much attention. Potassium-ion batteries represent a promising candidate because of the abundance of potassium resources. As for the choices of anodes, graphite exhibits encouraging potassium-ion storage properties; however, it suffers limited rate capability and poor cycling stability. Here in this paper, nongraphitic carbons as K-ion anodes with sodium carboxymethyl cellulose as the binder are systematically investigated. Compared to hard carbon and soft carbon, a hard–soft composite carbon with 20 wt% soft carbon distributed in the matrix phase of hard carbon microspheres exhibits highly amenable performance: high capacity, high rate capability, and very stable long-term cycling. In contrast, pure hard carbon suffers limited rate capability, while the capacity of pure soft carbon fades more rapidly.

25 ENERGY STORAGE↗

Flexible MXene/Graphene Films for Ultrafast Supercapacitors with Outstanding Volumetric Capacitance

A strategy to prepare flexible and conductive MXene/graphene (reduced graphene oxide, rGO) supercapacitor electrodes by using electrostatic self-assembly between positively charged rGO modified with poly(diallyldimethylammonium chloride) and negatively charged titanium carbide MXene nanosheets is presented. After electrostatic assembly, rGO nanosheets are inserted in-between MXene layers. As a result, the self-restacking of MXene nanosheets is effectively prevented, leading to a considerably increased interlayer spacing. Accelerated diffusion of electrolyte ions enables more electroactive sites to become accessible. The freestanding MXene/rGO-5 wt% electrode displays a volumetric capacitance of 1040 F cm –3 at a scan rate of 2 mV s –1 , an impressive rate capability with 61% capacitance retention at 1 V s –1 and long cycle life. Moreover, the fabricated binder-free symmetric supercapacitor shows an ultrahigh volumetric energy density of 32.6 Wh L –1 , which is among the highest values reported for carbon and MXene based materials in aqueous electrolytes. Furthermore, this work provides fundamental insight into the effect of interlayer spacing on the electrochemical performance of 2D hybrid materials and sheds light on the design of next-generation flexible, portable and highly integrated supercapacitors with high volumetric and rate performances.

36 MATERIALS SCIENCE↗

A Self-Healable Sulfide/Polymer Composite Electrolyte for Long-Life, Low-Lithium-Excess Lithium-Metal Batteries

Solid electrolyte-protected lithium-metal anodes promise energy-dense, safe cells. While sulfide solid electrolytes enable facile processability and fast ion transport, they suffer from complex chemo-mechanical issues, including Li plating-induced fracture and Li stripping-induced contact loss. To address these issues, a grafting approach is implemented to functionalize the sulfide solid electrolyte (Li 3,85 Sn 0.85 Sb 0.15 S 4 ) with a self-healing unit. This leads to a dynamic bonding between the solid electrolyte network and a mechanically robust polymer scaffold, which reversibly accommodates the volume changes of the lithium-metal anode. Thus, the approach improves the interfacial contact between the lithium-metal anode and the composite electrolyte, enabling stable cycling at a mild stack pressure (160 kPa). With a negative to positive capacity ratio equals to 1, pouch full cells with a high-nickel cathode (nickel content > 90%) and lithium-metal anode display 92% capacity retention for 140 cycles. Engineering the interface between solid electrolyte and the polymeric binder offers a promising pathway to address the chemo-mechanical issues.

36 MATERIALS SCIENCE↗