Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WOOD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Long-term Carbon Loss and Recovery Following Selective Logging in Amazon Forests

Amazon deforestation contributes significantly to global carbon (C) emissions. In comparison, the contribution from selective logging to atmospheric CO2 emissions, and its impact on regional C dynamics, is highly uncertain. Using a new geographically-based modeling approach in combination with high resolution remote sensing data from 1999-2002, we estimate that C emissions were 0.04 – 0.05 Pg C yr-1 due to selective logging from a ~2,664,960 km2 region of the Brazilian Amazon. Selective logging was responsible for 15-19% higher carbon emissions than reported from deforestation (clear-cutting) alone. Our simulations indicated that forest carbon lost via selective logging lasts two to three decades following harvest, and that the original live biomass takes up to a century to recover, if the forests are not subsequently cleared. The two- to three-decade loss of carbon results from the biomass damaged by logging activities, including leaves, wood, and roots, estimated to be 89.1 Tg C yr-1 from 1999-2002 over the study region, leaving 70.0 Tg C yr-1 and 7.9 Tg C yr-1 to accumulate as coarse woody debris and soil C, respectively. While avoided deforestation is central to crediting rainforest nations for reduced carbon emissions, the extent and intensity of selective logging are also critical to determining carbon emissions in the context of Reduced Emissions from Deforestation and Forest Degradation (REDD). We show that a combination of automated high-resolution satellite monitoring and detailed forest C modeling can yield spatially explicit estimates of harvest related C losses and subsequent recovery in support of REDD and other international carbon market mechanisms.

54 ENVIRONMENTAL SCIENCES↗

Conserved Macromolecular Architecture of Poplar Secondary Cell Walls Revealed by ssNMR and Atomistic Modeling

The macromolecular architecture of plant secondary cell walls governs wood's mechanical and biochemical properties, yet its natural intra-species variability remains poorly characterized. Here, we combined 13C solid-state NMR (ssNMR), multivariate statistical analysis, and molecular modeling to profile nanoscale structure across 13 genetically diverse Populus trichocarpa genotypes grown in 13C-enriched atmospheres. SsNMR-derived phenotypes spanning composition, structure, mobility, and inter-polymer proximities reveal a conserved architecture, with a subtle yet coordinated variation organizing into dominant structural and secondary mobility axes. A representative atomistic model captures these features and reproduces experimental metrics. Molecular dynamics simulations support a weak but consistent positive correlation between cellulose abundance and crystalline-like order, with interior cellulose chains enriched in tg (trans-gauche) conformations without expanding crystalline cores. Together, experiment and simulation reveal a genetically buffered, broadly conserved nanoscale architecture across genotypes, where subtle fine-tuning of cellulose bundling and matrix packing balances mechanical performance with biological function.

09 BIOMASS FUELS↗

Leveraging the bioeconomy for carbon drawdown

Stringent climate change mitigation scenarios rely on large-scale drawdown of carbon dioxide from the atmosphere. Amongst drawdown technologies, bioenergy with carbon capture and sequestration (BECCS) has received considerable attention in the climate mitigation literature. Recently, attention has shifted further from a relatively narrow focus on BECCS to a broader focus on Biomass Carbon Removal and Storage (BiCRS). The concept of BiCRS has the potential to enable a future where the climate mitigation value of biomass resources is more valuable than the energy value, due to the potential to remove and sequester large quantities atmospheric CO2. This article provides a qualitative overview of prominent BiCRS technologies from which a set of the most promising technologies are assessed quantitively through life cycle assessment. There are numerous opportunities to incorporate carbon removal and management within the bioeconomy, but the majority of immediate carbon removal potential exists in four bioproducts: bioenergy, bioplastics, biochar, and wood products. We analyze the life cycle greenhouse gas emissions and disposition of sequestered carbon over 10 000 years for four bioproducts representative of each broader category: an advanced BECCS pathway, biopolyethylene, oriented strand board, and biochar soil amendment. We find that the BECCS pathway has the greatest magnitude and durability of CO2 storage over all time horizons. However, non-BECCS pathways achieve 34–64% of the drawdown magnitude relative to BECCS and retain 55–67% of their initial drawdown over 100 years (central estimate). We identify three engineering strategies for enhancing carbon drawdown: reducing biomass supply chain emissions, maximizing carbon stored in long-lived products, and extending the term of carbon storage. Finally, we highlight the need to characterize both the magnitude and permanence of carbon drawdown as a means for policymakers and technology developers to deploy limited biomass resources to maximize mitigation benefits.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The {beta}-Decay Properties of Scissors Mode 1{sup +} States in {sup 164}Er

The beta decay properties of collective I{sup {pi}}K = 1{sup +}1 states in doubly even deformed {sup 164}Er nuclei are investigated in the framework of the rotational invariant random-phase approximation. It is shown that an essential decrease of the rate of the allowed {beta}-decay to the excited 1{sup +}-states as compared with that to the ground state may be due to the orbital nature of the states. The model Hamiltonian includes restoring rotational invariance of the deformed single particle Hamiltonian forces and the spin-spin interactions. The analytical expressions for the Gamov-Teller (G-T) and Fermi (F) decay matrix elements are derived. The single-particle energies were obtained from the Warsaw deformed Woods-Saxon potential with deformation parameter {delta}{sub 2} = 0.24. The numerical results for {beta}{sup +} transition from {sup 164}Tm to {sup 164}Er indicate the importance of using rotational invariant Hamiltonian to explain experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Investigations of the g{sub K}-factors in the {sup 175,177,179}Hf Isotopes

In this paper the intrinsic g{sub K} and effective spin g{sub s} factors of the odd-mass {sup 175-179}Hf isotopes have been investigated within the Tamm-Dancoff approximation by using the realistic Saxon-Woods potential. The theoretically calculated g{sub K} and g{sub s}{sup eff} values are compared with experimental data. The comparison of the measured and calculated values of the effective g{sub s} factor shows that the spin polarization explains quite well the observed reduction of g{sub s} from its free-nucleon value.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Particle-triaxial rotor calculations around {sup 195}Pt

Particle-triaxial rotor calculations have been performed for the negative parity states in {sup 195}Pt and {sup 193}Os. The doublet structure of the low-lying excited states is better described when a Woods-Saxon potential is used compared to the use of a modified harmonic oscillator potential. The predicted level energies and B(E2) transition strengths are in overall agreement with the experimental data and the U(6/12) results. The ratios of B(E2) values between the states of two doublets agree well with those obtained assuming a pseudospin symmetry. In {sup 193}Os, the model calculations can be used for clarification of the spin assignments in cases where they are ambiguous. It is interesting to check them by new precise spin determination.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Systematic study of the nuclear potential through high precision back-angle quasi-elastic scattering measurements of {sup 16}O and {sup 32}S on various targets

Elastic and inelastic scattering have proven an excellent method to probe the nuclear potential in the surface region [1]. A surface diffuseness parameter of around 0.63 fm is accepted as describing elastic and inelastic scattering data. A new method to determine the diffuseness was proposed [2] using high precision quasi-elastic excitation functions at sub-barrier energies, and at backward angles. In response to this proposal, we have made measurements for {sup 32}S+{sup 170}Er, {sup 186}W, {sup 197}Au, {sup 208}Pb[3], and more recently for the reactions {sup 16}O+{sup 144,154}Sm, {sup 186}W, {sup 197}Au, {sup 208}Pb[4].Both single channel and coupled-channels calculations have been performed to extract the diffuseness parameter of the nuclear potential, assuming a Woods-Saxon shape. For the reactions involving near-spherical targets, both theoretical analyses give the same diffuseness parameter, as had been hoped, showing that the effect of couplings to intrinsic excited states in the target and projectile is negligible. On the other hand, for deformed systems, coupling effects are surprisingly important even at deep sub-barrier energies, reducing the flux at backward angles.Energy spectra recorded with the back-angle Si detector show a large number of distinct peaks as well as a broad structure at even higher excitation energies. A comparison of the back-scattered energy spectra with coupled-channels calculations demonstrates that including couplings only to low lying collective states in coupled-channels calculations is inadequate in describing the reaction mechanism even at energies close to the barrier.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Towards a Consistent Understanding of Near-barrier Reactions

The coupled channels model has generally been very successful in describing the different reaction outcomes following the collision of heavy nuclei. However, several outstanding problems remain--amongst them the inability to simultaneously describe elastic scattering and fusion data, and more recently the failure to consistently describe deep-sub barrier and above-barrier fusion. Possible reasons include deviation of the nuclear potential from the assumed Woods-Saxon form, and the emergence of processes which cannot be described within the coherent coupled channels framework. The question is whether there are inadequacies in the current models which need to be addressed before we can hope to get a consistent description of the main reaction processes. We put forward the possibility that dissipation near the fusion barrier and the consequent loss of coherence need to be considered for a realistic description of nuclear collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Treatment of continuum in nuclear reactions involving weakly bound systems. A simple model to test different prescriptions describing the coupling to continuum states

We exploit a model describing the break-up of weakly-bound nuclei that can be used as a laboratory for testing different prescriptions that have been advanced in the literature to take into account the near-by presence of continuum states. In the model we follow the evolution of a single particle wave function in one dimension, initially bound by a Woods-Saxon type potential and then perturbed by a time- and position-dependent external field. Proper choices of this potential can simulate the effect of the interaction between reaction partners in a nuclear collision. These processes generate inelastic excitation probabilities that--distributed over the bound and continuum states of the system--lead to either a partial or a total fragmentation of the final wave function. The comparison with the exact calculations shows that standard coupled channel descriptions based on discretization of the continuum can be accurate only when a proper choice is made of the number of discrete states, of the energy mesh and of the energy cutoff. This may imply, even in simplified cases, the use of a rather large (and unpracticable) number of channels. The use of a more restricted number of channels may lead to misleading results.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fusion of the positive Q-value system {sup 36}S+{sup 48}Ca

The fusion excitation function for {sup 36}S+{sup 48}Ca with positive Q-value for the compound nucleus formation, has been measured from near the barrier down to very low energies, where ''fusion hindrance'' may be expected. No evidence of hindrance shows up in the measured energy range. Coupled-channels calculations have been performed with a large diffuseness parameter of the Woods-Saxon potential, reproducing the data above and below the barrier.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Microspectroscopy At Beamline 73 MAX-lab

Presentation of some projects at the infrared microspectroscopy experimental station at beamline 73 MAX-lab. Among the subjects are found identification of organic residues in fossil material and examination of the chemistry in an old oak wood wreck.

43 PARTICLE ACCELERATORS↗

Kinetics of Moisture Absorption for Alkali Extracted Steam-Exploded Fiber Filled High-Density Polyethylene Composites

Acacia mangium wood fiber derived from steam-explosion and fiber fractionation treatment was used as fillers for high-density polyethylene (HDPE). The alkali extracted steam-exploded fibers (AEF) obtained were acetylated to produce acetylated fibers (AAEF) having three different weight percent gain (WPG). Composites of AEF or AAEF and HDPE were prepared via 2-roll mill, compression molded and cut into dumbbell specimens. All samples were immersed in water at room temperature for 30 days. The process of absorption of water by all composites followed the kinetics and mechanisms described by the Fick's theory. Diffusion coefficient (D) values increased with filler loading but decreased with increasing WPG of the AAEF fiber. Further decrease was observed when maleated polyethylene (MAPE) was added to the composite system. This was due to improved fiber-matrix adhesion that restricts movement of water molecules from further penetrate inside the composite structures.

36 MATERIALS SCIENCE↗

The {sup 6}He Optical Potential at energies around the Coulomb barrier

We present an Optical Model (OM) study of {sup 6}He on {sup 208}Pb elastic scattering data, measured at laboratory energies around the Coulomb barrier (E{sub lab} = 14, 16, 18, 22, and 27 MeV)[1]. For the projectile-target bare interaction, we use the microscopic Sao Paulo Potential (SPP). This bare interaction is supplemented with a Coulomb Dipole Polarization (CDP) potential, as well as a diffuse complex Woods-Saxon potential. Four-body Continuum-Discretized-Coupled-Channels (CDCC) calculations have been performed in order to support the optical model analysis. We have also studied the alpha channel, which is the dominant reaction process. In the analysis of this channel, we compare the angular and energy distributions of the alpha particles measured at 22 MeV, with Distorted Wave Born Approximation (DWBA) calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The use of Ixaru's method in locating the poles of the S-matrix in strictly finite-range potentials

Energies of the S-matrix poles are calculated by solving the radial Schroedinger equation numerically by using Ixaru's CPM(2) method. The trajectories of the poles in the complex wave number plane are determined for two nuclear potentials that are zero beyond finite distances. These are the Woods-Saxon form with cutoff and the Salamon-Vertse potential, which goes to zero smoothly at a finite distance. Properties of the trajectories are analyzed for real and complex values of the depths of the corresponding potentials.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Elastic scattering measurements for {sup 7}Be+{sup 27}Al system at RIBRAS facility

Elastic scattering angular distribution measurements of {sup 7}Be+{sup 27}Al system were performed at the laboratory energy of 15.6 MeV. The {sup 7}Be secondary beam was produced by the proton transfer reaction {sup 3}He({sup 6}Li,{sup 7}Be) and impinged on {sup 27}Al and {sup 197}Au targets, using the Radioactive Ion Beam (RIB) facility, RIBRAS. The elastic angular distribution was obtained within the angular range of 15{sup 0} - 80{sup 0} at the center of mass frame. Optical model calculations have been performed using the Woods- Saxon form factors and the Sao Paulo potential to fit the experimental data. The total reaction cross section was derived.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Lithium pellet production (LiPP): A device for the production of small spheres of lithium

With lithium as a fusion material gaining popularity, a method for producing lithium pellets relatively quickly has been developed for NSTX. The Lithium Pellet Production device is based on an injector with a sub-millimeter diameter orifice and relies on a jet of liquid lithium breaking apart into small spheres via the Plateau-Rayleigh instability. A prototype device is presented in this paper and for a pressure difference of {Delta}P= 5 Torr, spheres with diameters between 0.91 < D < 1.37 mm have been produced with an average diameter of D= 1.14 mm, which agrees with the developed theory. Successive tests performed at Princeton Plasma Physics Laboratory with Wood's metal have confirmed the dependence of sphere diameter on pressure difference as predicted.

36 MATERIALS SCIENCE↗

Geometrical deuteron stripping revisited

We investigate the reality of the idea of geometrical deuteron stripping originally envisioned by Serber. By taking into account of realistic deuteron wavefunction, nuclear density, and nucleon stopping mean free path, we are able to estimate inclusive deuteron stripping cross section for deuteron energy up to before pion production. Our semiclassical model contains only one global parameter constant for all nuclei which can be approximated by Woods-Saxon or any other spherically symmetric density distribution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗