Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VOIDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Polychromatic Microdiffraction Analysis of Defect Self-Organization in Shock Deformed Single Crystals

A spatially resolved X-ray diffraction method - with a submicron 3D resolution together with SEM and OIM analysis are applied to understand the arrangements of voids, geometrically necessary dislocations and strain gradient distributions in samples of Al (1 2 3) and Cu (0 0 1) single crystals shocked to incipient spallation fracture. We describe how geometrically necessary dislocations and the effective strain gradient alter white beam Laue patterns of the shocked materials. Several distinct structural zones are observed at different depths under the impact surface. The density of geometrically necessary dislocations (GNDs) is extremely high near the impact and back surface of the shock recovered crystals. The spall region is characterized by a large density of mesoscale voids and GNDs. The spall region is separated from the impact and back surfaces by compressed regions with high total dislocation density but lower GNDs density. Self-organization of shear bands is observed in the shock recovered Cu single crystal.

36 MATERIALS SCIENCE↗

A new multi-scale structure finding algorithm to identify cosmological structure

We introduce a new structure finding algorithm that self-consistently parses large scale cosmological structure into clusters, filaments and voids. This structure finding algorithm probes the structure at multiple scales and classifies the appropriate regions with the most probable structure type and size. We show that it can identify the baryon fraction of intercluster medium and cosmological voids.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of thermal transport properties of -SiC

The thermal conductivity in Si and -SiC with typical defects produced by radiation was investigated using molecular dynamics. It is shown that introduction of vacancies/voids in the perfect material leads to a significant reduction of thermal conductivity. The concentration dependence of thermal conductivity on the void concentration obtained is in reasonable agreement with existing experimental data. Through comparison of results obtained using molecular dynamics it was demonstrated that standard Debye-Callaway model can significantly underestimate phonon scattering on voids.

36 MATERIALS SCIENCE↗

Defect structures induced by high-energy displacement cascades in γ uranium

Displacement cascade simulations were conducted for the c uranium system based on molecular dynamics. A recently developed modified embedded atom method (MEAM) potential was employed to replicate the atomic interactions while an embedded atom method (EAM) potential was adopted to help characterize the defect structures induced by the displacement cascades. The atomic displacement process was studied by providing primary knock-on atoms (PKAs) with kinetic energies from 1 keV to 50 keV. The influence of the PKA incident direction was examined. The defect structures were analyzed after the systems were fully relaxed. The states of the self-interstitial atoms (SIAs) were categorized into various types of dumbbells, the crowdion, and the octahedral interstitial. The voids were determined to have a polyhedral shape with {110} facets. The size distribution of the voids was also obtained. The results of this study not only expand the knowledge of the microstructural evolution in irradiated c uranium, but also provide valuable references for the radiation-induced defects in uranium alloy fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Combined effect of injected interstitials and He implantation, and cavities inside dislocation loops in high purity Fe-Cr alloys

High purity Fe-Cr alloys with Cr content ranging from 3 to 14 wt% were irradiated by self-ions at 500 °C in dual-beam mode up to 157 displacements per atom (dpa), 17 appm He/dpa. Transmission electron microscopy (TEM) on focused ion beam foils revealed the depth distribution of irradiation induced cavities and dislocation loops. A detailed quantitative analysis of cavity microstructure was performed on Fe14%Cr, while Fe(3, 5, 10, 12)%Cr were analyzed qualitatively. A homogeneous distribution of small cavities were observed up to the damage peak. From surface to the damage peak, cavity number density increased almost linearly. The cavity microstructure changed drastically at and after the damage peak, where the size increased and number density decreased. Most notably, the microstructure consisted of a striking mixture of heterogeneously nucleated cavities inside dislocation loops and freely nucleated cavities in the matrix. Further, the depth-dependent void swelling increased continuously along the damage depth. This contrasts with most ion irradiation results where suppression of void swelling occurs adjacent to the damage peak due the injected interstitial effect. We hypothesize a plausible mechanism of the observed swelling variation based on a combined effect of the injected interstitials and helium implantation near the damage peak by comparing the results with those in pure iron irradiated under same conditions. This synergistic effect may develop cavity microstructures which do not necessarily reflect microstructures expected due to injected interstitial effect and can be easily wrongly interpreted. The depth dependent dislocation loop microstructure was studied qualitatively in Fe14%Cr sample. Up to the damage peak, a complex dense network of dislocations formed due to the interaction/impingement of the dislocation loops. Individually resolvable loops were only observed after the damage peak, where their association with cavities was noted. Furthermore helium also induced heterogeneous cavity nucleation on dislocations constituting a grain boundary and on pre-existing dislocation lines.

36 MATERIALS SCIENCE↗

A new triclinic modification of the pyrochlore-type KOs{sub 2}O{sub 6} superconductor

A new modification of KOs{sub 2}O{sub 6}, the representative of a new structural type (Pearson symbol aP18, a=5.5668(1) A, b=6.4519(2) A, c=7.2356(2) A, {alpha}=65.377(3){sup o}, {beta}=70.572(3){sup o}, {gamma}=75.613(2){sup o} space group P-1, no. 2 was synthesized employing high pressure technique. Its structure was determined by single-crystal X-ray diffraction. The structure can be described as two OsO{sub 6} octahedral chains relating to each other through inversion and forming big voids with K atoms inside. Quantum chemical calculations were performed on the novel compound and structurally related cubic compound. High-pressure X-ray study showed that cubic KOs{sub 2}O{sub 6} phase was stable up to 32.5(2) GPa at room temperature. - Graphical abstract: A new modification of KOs{sub 2}O{sub 6}, the representative of a new structural type (Pearson symbol aP18, a=5.5668(1) A, b=6.4519(2) A, c=7.2356(2) A, {alpha}=65.377(3){sup o}, {beta}=70.572(3){sup o}, {gamma}=75.613(2){sup o} space group P-1, no. 2 was synthesized employing high pressure technique. The structure can be described as two OsO{sub 6} octahedral chains relating to each other through inversion and forming big voids with K atoms inside.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Graphitic carbon nitride C{sub 6}N{sub 9}H{sub 3}.HCl: Characterisation by UV and near-IR FT Raman spectroscopy

The graphitic layered compound C{sub 6}N{sub 9}H{sub 3}.HCl was prepared by reaction between melamine and cyanuric chloride under high pressure-high temperature conditions in a piston cylinder apparatus and characterised using SEM, powder X-ray diffraction, UV Raman and near-IR Fourier transform Raman spectroscopy with near-IR excitation. Theoretical calculations using density functional methods permitted evaluation of the mode of attachment of H atoms to nitrogen sites in the structure and a better understanding of the X-ray diffraction pattern. Broadening in the UV and near-IR FT Raman spectra indicate possible disordering of the void sites within the graphitic layers or it could be due to electron-phonon coupling effects. - Graphical abstract: The graphitic layered compound C{sub 6}N{sub 9}H{sub 3}.HCl was prepared by reaction between melamine and cyanuric chloride under high pressure-high temperature conditions in a piston cylinder apparatus and characterised using SEM, powder X-ray diffraction, UV Raman and near-IR Fourier transform Raman spectroscopy using near-IR excitation. Theoretical calculations using density functional methods permitted evaluation of the mode of attachment of H atoms to nitrogen sites around the C{sub 12}N{sub 12} voids within the layered structure and also led to better understanding of the X-ray diffraction pattern. Sharp peaks in the UV Raman spectra are due to C{sub 3}N{sub 3} triazine ring units in the structure, that may be enhanced by resonance Raman effects. Broadening in the UV and near-IR FT Raman spectra indicate possible disordering within the graphitic layers or electron-phonon coupling effects.

36 MATERIALS SCIENCE↗

Radiation induced nanovoid shrinkage in Cu at room temperature: An in situ study

Radiation induced void swelling is widely observed in a variety of metallic materials. Here, by using sputtering deposition technique, we have introduced faceted nanovoids into Cu films. In-situ Kr ion irradiation was subsequently performed at room temperature to investigate the evolution of nanovoids. Most nanovoids found to shrink gradually with increasing dose. Irradiation induced high-density vacancy clusters exist mostly in the formof stacking fault tetrahedrons. Phase fieldmodeling reveales that void shrinkage arises from biased absorption of interstitials. These findings provide insights to the physical mechanisms of radiation response of nanovoids in metallic materials.

36 MATERIALS SCIENCE↗

A Yolk-Shell Design for Stabilized and Scalable Li-Ion Battery Alloy Anodes

Silicon is regarded as one of the most promising anode materials for next generation lithium-ion batteries. For use in practical applications, a Si electrode must have high capacity, long cycle life, high efficiency, and the fabrication must be industrially scalable. Here, we design and fabricate a yolk-shell structure to meet all these needs. The fabrication is carried out without special equipment and mostly at room temperature. Commercially available Si nanoparticles are completely sealed inside conformal, thin, self-supporting carbon shells, with rationally designed void space in between the particles and the shell. Finally, the well-defined void space allows the Si particles to expand freely without breaking the outer carbon shell, therefore stabilizing the solid-electrolyte interphase on the shell surface. High capacity (~2800 mAh/g at C/10), long cycle life (1000 cycles with 74% capacity retention), and high Coulombic efficiency (99.84%) have been realized in this yolk-shell structured Si electrode.

25 ENERGY STORAGE↗

Torus-shaped dust clouds trapped in a magnetized anodic plasma

Dust particles confined in a magnetized anodic plasma can form a torus-shaped cloud with a dust-free region (void) in the center. Most of the dust particles perform a rotational motion about the major axis of the torus. The torus-shaped dust cloud and the velocity of the particles are studied by varying the external plasma parameters like magnetic field strength and rf-power of the source plasma. Two-dimensional potential contours are measured with an emissive probe. The results are used to discuss the force balance between electric field force and ion drag acting on the dust particles that determines the void size.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of the Critical State in Soil Mechanics Using DEM

The existence and uniqueness of the so-called critical state in soil mechanics is validated in our DEM simulations of irregular polygonal particles. For different particle shape characteristics, the critical state is independent of the initial stress and density conditions. We retain low stress levels, since we do not take into account the crushing of particles. In biaxial test simulations isotropic particles evolve toward a limiting state in which the system reaches a critical void ratio and deforms with constant volume, deviatoric stress, fabric anisotropy, and mechanical coordination number. The last one has been found to be the first variable to attain a critical value making possible for the rest of micro-and-macro-mechanical variables the convergence to the critical state. In periodic shear cell tests, for large shear deformations samples with anisotropic particles reach at the macro-mechanical level the same critical value for both shear force and void ratio. At the micro-mechanical level the components of the stress tensor, the fabric tensor and the inertia tensor of the particles also reach the same stationary state. By varying the aspect ratio of the particles we stated the strong influence of particle shape anisotropy on the parameters that the granular packing attained at the critical state.

36 MATERIALS SCIENCE↗

IDENTIFYING FRACTURE ORIGIN IN CERAMICS BY COMBINATION OF NONDESTRUCTIVE TESTING AND DISCRETE ELEMENT ANALYSIS

Advanced ceramic materials have been extensively applied in aerospace, automobile and other industries. However, the reliability of the advanced ceramics is a major concern because of the brittle nature of the materials. In this paper, combination of nondestructive testing and numerical modeling Discrete Element Method is proposed to identify the fracture origin in ceramics. The nondestructive testing--laser scattering technology is first performed on the ceramic components to reveal the machining-induced damage such as cracks and the material-inherent flaws such as voids, then followed by the four point bending test. Discrete Element software package PFC{sup 2D} is used to simulate the four point bending test and try to identify where the fractures start. The numerical representation of the ceramic materials is done by generating a densely packed particle system using the specimen genesis procedure and then applying the suitable microparameters to the particle system. Simulation of four point bending test is performed on materials having no defects, materials having manufacturing-induced defects like cracks, and materials having material-inherent flaws like voids. The initiation and propagation of defects is modeled and the mean contact force on the loading ball is also plotted. The simulation prediction results are well in accordance with the nondestructive testing results.

36 MATERIALS SCIENCE↗

An interrupted tensile testing at high strain rates for pure copper bars

A high-speed tensile facility (HSTF) invented by us was applied to interrupting the tests for pure copper specimen bars controlled locally at different levels of elongation. It was realized to isolate and identify the different stages of the dynamic fracture process of the pure copper specimen bar under impact tension. The results of scanning electron microscopical (SEM) investigation of the recovered pure copper specimens show that the void evolution near the surface of the minimum cross-section of the necking area is more severe than that at the middle of the necking area, which may be connected with the findings discussed by Alves and Jones [J. Mech. Phys. Solids 47, 643 (1999)]. The constitutive models in a certain range of strain determined from the tensile split Hopkinson bar optimized by us were employed and adjusted in numerically simulating the large deformation of the pure copper specimen in the interrupted tensile tests on HSTF. The dependence of the instability strain of thermoviscoplastic materials in simple tension on material parameters delineated by Batra and Wei [Int. J. Impact Eng. 34, 448 (2007)] was inspected in predicting the diffuse necking of the specimen bar. The axisymmetric necking rod model with a central void under static tension presented by Ragab [Eng. Fract. Mech. 71, 1515 (2004)] was extended to predicting the local necking and fracture of the specimen bar under impact tension.

42 ENGINEERING↗

Enhancement of nanovoid formation in annealed amorphous Al{sub 2}O{sub 3} including W

The effect of W on the nanovoid formation in annealed amorphous Al{sub 2}O{sub 3} was studied by transmission electron microscopy and molecular dynamics simulations. A comparison of the void formation behavior in electron-beam deposited Al{sub 2}O{sub 3} (without W) and resistance-heating deposited Al{sub 2}O{sub 3} (with 10 at. % W) revealed that W enhances the formation and growth of nanovoids. An analysis of the pair distribution function (PDF) in both types of amorphous Al{sub 2}O{sub 3} showed that the introduction of W into amorphous Al{sub 2}O{sub 3} brings about a significant change in the amorphous structure. Furthermore, it was found by high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) that sub-nm sized W clusters exist in as-deposited Al{sub 2}O{sub 3} prepared by resistance-heating and then dissolve in the amorphous matrix with annealing. The combination of PDF analysis and HAADF-STEM observation provides evidence that the enhancement of void formation originates in the heterogeneous short-range atomic configurations induced by the addition of W.

36 MATERIALS SCIENCE↗

Metrology and Failure Analysis for 3D IC Integration

At the same time as research in 3D TSV technology is advancing quickly, the analytical techniques used in the evaluation of 3D stacks must also advance in capability. Microscopy techniques for which silicon is opaque such as scanning acoustic microscopy (SAM) and confocal infrared (IR) microscopy are capable of inspecting the interface between bonded wafer pairs, while high resolution X-ray computed tomography (XCT) is used to detect voids in TSVs. With nano-XCT, voids in copper TSVs with sub-100 nm size can be visualized. For more detailed failure characterization, a target Focused Ion Beam (FIB) cross-section through the localized region of interest (defect) and subsequent scanning electron microscopy (SEM) imaging is proposed. Currently, the most important requirement is to reduce the so-called time-to-data, e. g. for defect localization using nano-XCT and for cross-section characterization.

36 MATERIALS SCIENCE↗

Nanostructured light-absorbing crystalline CuIn{sub (1–x)}Ga{sub x}Se{sub 2} thin films grown through high flux, low energy ion irradiation

A hybrid effusion/sputtering vacuum system was modified with an inductively coupled plasma (ICP) coil enabling ion assisted physical vapor deposition of CuIn{sub 1−x}Ga{sub x}Se{sub 2} thin films on GaAs single crystals and stainless steel foils. With <80 W rf power to the ICP coil at 620–740 °C, film morphologies were unchanged compared to those grown without the ICP. At low temperature (600–670 °C) and high rf power (80–400 W), a light absorbing nanostructured highly anisotropic platelet morphology was produced with surface planes dominated by (112){sub T} facets. At 80–400 W rf power and 640–740 °C, both interconnected void and small platelet morphologies were observed while at >270 W and above >715 °C nanostructured pillars with large inter-pillar voids were produced. The latter appeared black and exhibited a strong (112){sub T} texture with interpillar twist angles of ±8°. Application of a negative dc bias of 0–50 V to the film during growth was not found to alter the film morphology or stoichiometry. The results are interpreted as resulting from the plasma causing strong etching favoring formation of (112){sub T} planes and preferential nucleation of new grains, balanced against conventional thermal diffusion and normal growth mechanisms at higher temperatures. The absence of effects due to applied substrate bias suggests that physical sputtering or ion bombardment effects were minimal. The nanostructured platelet and pillar films were found to exhibit less than one percent reflectivity at angles up to 75° from the surface normal.

36 MATERIALS SCIENCE↗

Sapphire decomposition and inversion domains in N-polar aluminum nitride

Transmission electron microscopy (TEM) techniques and potassium hydroxide (KOH) etching confirmed that inversion domains in the N-polar AlN grown on c-plane sapphire were due to the decomposition of sapphire in the presence of hydrogen. The inversion domains were found to correspond to voids at the AlN and sapphire interface, and transmission electron microscopy results showed a V-shaped, columnar inversion domain with staggered domain boundary sidewalls. Voids were also observed in the simultaneously grown Al-polar AlN, however no inversion domains were present. The polarity of AlN grown above the decomposed regions of the sapphire substrate was confirmed to be Al-polar by KOH etching and TEM.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation of magnetized nanodusty plasmas in a radio frequency-driven parallel-plate reactor

Nanodust is produced in an rf-driven push-pull parallel-plate reactor using argon with an acetylene admixture at 5–30 Pa. A scheme for the preparation of nanodust clouds with particle radii up to 400 nm for investigations in magnetized plasmas is proposed. The confinement that keeps the nanodust of different radii inside a moderately magnetized discharge (B ≤ 500 mT) is investigated by a comparison of 2d-Langmuir probe measurements in the dust-free plasma without and with a magnetic field and by the analysis of scattered light of nanodust clouds. It is shown that the dust cloud changes its shape when the dust density changes. This results in a reversed α-γ{sup ′} transition from a dense dust cloud with a central disk-like void to a dilute dust cloud with a toroidal void. When the dust density is further reduced, filaments are observed in the central part of the cloud, which were absent in the high-density phase. It is concluded that the dense nanodust cloud is able to suppress plasma filamentation in magnetized plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗