Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VALIDATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

NASA advanced turboprop research and concept validation program

NASA has determined by experimental and analytical effort that use of advanced turboprop propulsion instead of the conventional turbofans in the older narrow-body airline fleet could reduce fuel consumption for this type of aircraft by up to 50 percent. In cooperation with industry, NASA has defined and implemented an Advanced Turboprop (ATP) program to develop and validate the technology required for these new high-speed, multibladed, thin, swept propeller concepts. This paper presents an overview of the analysis, model-scale test, and large-scale flight test elements of the program together with preliminary test results, as available.

Whitlow, John B., Jr.↗
NASA NTRS1988

Knowledge based system verification and validation as related to automation of space station subsystems: Rationale for a knowledge based system lifecycle

The role of verification and validation (V and V) in software has been to support and strengthen the software lifecycle and to ensure that the resultant code meets the standards of the requirements documents. Knowledge Based System (KBS) V and V should serve the same role, but the KBS lifecycle is ill-defined. The rationale of a simple form of the KBS lifecycle is presented, including accommodation to certain critical KBS differences from software development.

Richardson, Keith↗
NASA NTRS1988

DMSP-SSM/1 NASA algorithm validation using primarily LANDSAT and secondarily DMSP and/or AVHRR visible and thermal infrared satellite imagery

The approach to the DMSP SSMI (Defense Meteorological Satellite Program; Special Sensor Microwave Imager) sea-ice validation effort is to demonstrate a quantitative relationship between the SSMI-derived sea ice parameters and those same parameters derived from other data sets including visible and infrared satellite imagery, aerial photographic and high-resolution microwave aircraft imagery. The question to be addressed is to what accuracy (relative to these other observations) can the following ice parameters be determined: (1) position of the ice boundary; (2) total sea ice concentration; and (3) multiyear sea ice concentration. Specific tasks include: (1) a study of the interrelationship of surface information content and sensor spatial and spectral resolution in order to establish relationships between ice surface features and the manner in which they are expressed in the satellite observations; and (2) apply these relationships to map the sea ice features which can be used to evaluate NASA's proposed SSM/1 sea ice algorithms. Other key points to be addressed include the accuracy to which these parameters can be determined in different regions (marginal ice zone such as Bering Sea, Arctic ocean, such as Beaufort Sea); the accuracy of these parameters for different seasons; the accuracy of the algorithms weather filter under different weather conditions; and the effectiveness of the 85.5 GHz channels to locate the ice edge.

Steffen, K.↗
NASA NTRS1987

Validation of the filament winding process model

Tests were performed toward validating the WIND model developed previously for simulating the filament winding of composite cylinders. In these tests two 24 in. long, 8 in. diam and 0.285 in. thick cylinders, made of IM-6G fibers and HBRF-55 resin, were wound at + or - 45 deg angle on steel mandrels. The temperatures on the inner and outer surfaces and inside the composite cylinders were recorded during oven cure. The temperatures inside the cylinders were also calculated by the WIND model. The measured and calculated temperatures were then compared. In addition, the degree of cure and resin viscosity distributions inside the cylinders were calculated for the conditions which existed in the tests.

Calius, Emilo P.↗
NASA NTRS1987

Uniformly-valid asymptotic solutions to the Orr-Sommerfeld equation using multiple scales

The Orr-Sommerfeld equation is studied using the method of multiple scales. The leading-order uniformly-valid asymptotic solutions are obtained without recourse to heuristic methods for two different types of velocity profiles. Solutions were obtained for arbitrary velocity profiles without inflection or critical points and for profiles with simultaneous inflection and critical points. These are shown to reproduce previously obtained solutions in the inner and outer regions.

Long, Lyle N.↗
NASA NTRS1987

Validating regional differences in modelled satellite microwave signatures

A three-part microwave T(B) brightness temperature model was tested for applicability in regions of differing climatic and vegetation regime. Model parameters were limited to vegetation in the form of the normalized vegetation index (NDVI) and climatically modeled soil moisture. The T(B) model was calibrated for two climatically contrasting areas and subsequently validated on different test sites of similar climatic character. Vegetative characteristics in the form of the mean NDVI was used to partition and lump data from different test sites. Good agreement was realized between estimated T(B) and Nimbus-7 SMMR T(B) at the 6.6 GHz horizontal channel.

Owe, Manfred↗
NASA NTRS1988

Analytical and experimental validation of the Oblique Detonation Wave Engine concept

The Oblique Detonation Wave Engine (ODWE) for hypersonic flight has been analytically studied by NASA using the CFD codes which fully couple finite rate chemistry with fluid dynamics. Fuel injector designs investigated included wall and strut injectors, and the in-stream strut injectors were chosen to provide good mixing with minimal stagnation pressure losses. Plans for experimentally validating the ODWE concept in an arc-jet hypersonic wind tunnel are discussed. Measurements of the flow field properties behind the oblique wave will be compared to analytical predictions.

Adelman, Henry G.↗
NASA NTRS1987

A scattering model for perfectly conducting random surfaces. I - Model development. II - Range of validity

The surface current on a perfectly conducting randomly rough surface is estimated by solving iteratively a standard integral equation, and the estimate is then used to compute the far-zone scattered fields and the backscattering coefficients for vertical, horizontal and cross polarizations. The model developed here yields a simple backscattering coefficient expression in terms of the surface parameters. The expression reduces analytically to the Kirchhoff and the first-order small-perturbation model in the high- and low-frequency regions, respectively. The range of validity of the model is determined.

Fung, A. K.↗
NASA NTRS1983

Beyond face validity - A comment on Nicholls, Licht, and Pearl

In their discussion of the Bem Sex Role Inventory (BSRI; Bem, 1974) and the Personal Attributes Questionnaire (PAQ; Spence and Helmrich, 1978), Nicholls, et al. (1982) blur two issues. The first concerns the legitimacy of equating the clusters of gender-related personality traits tapped by these instruments with the global constructs of masculinity and feminity. The second concerns item similarity between the PAQ and BSRI M scales and measures of self-esteem and the question of whether the several instruments measure the same or separable constructs. Decisions about each of these issues involve complex considerations that do not directly involve face validity.

Spence, Janet T.↗
NASA NTRS1988

Validation of the NESSUS probabilistic finite element analysis computer program

A computer program, NESSUS, is being developed as part of a NASA-sponsored project to develop probabilistic structural analysis methods for propulsion system components. This paper describes the process of validating the NESSUS code, as it has been developed to date, and presents numerical results comparing NESSUS and exact solutions for a set of selected problems.

Wu, Y.-T.↗
NASA NTRS1988

The pros and cons of code validation

Computational and wind tunnel error sources are examined and quantified using specific calculations or experimental data, and a substantial comparison of theoretical and experimental results, or a code validation, is discussed. Wind tunnel error sources considered include wall interference, sting effects, Reynolds number effects, flow quality and transition, and instrumentation such as strain gage balances, electronically scanned pressure systems, hot film gages, hot wire anemometers, and laser velocimeters. Computational error sources include math model equation sets, the solution algorithm, artificial viscosity/dissipation, boundary conditions, the uniqueness of solutions, grid resolution, turbulence modeling, and Reynolds number effects. It is concluded that although improvements in theory are being made more quickly than in experiments, wind tunnel research has the advantage of the more realistic transition process of a right turbulence model in a free-transition test.

Bobbitt, Percy J.↗
NASA NTRS1988

Validating the airborne and ground based components of a differential GPS system

A differential GPS mechanization of an external data link concept under development at NASA Ames Research Center is discussed. The system is intended to evaluate the use of differential GPS to support helicopter approach operation. Analytical techniques for static testing and evaluation of the system hardware and software performance in real time are described. Several techniques that have been used to detect and rectify a specific problem encountered during the tests are dicussed. An example of flight test results using the validated system is provided.

Edwards, F. G.↗
NASA NTRS1988

Workshop on Verification and Validation of Knowledge Based Systems. I - Overview and meeting summary

An overview is presented of a workshop held on May 14-15, 1987. Presentations included overviews of knowledge-based system (KBS) fundamentals, introductions to verification and validation (V&V) methods currently being used, and theoretical V&V work. The findings of three working groups are considered, involving: (1) KBS V&V feasibility within current NASA software constraints, (2) V&V methods suited to KBS constraints, and future KBS V&V research goals.

Richardson, Keith↗
NASA NTRS1988

Knowledge based system verification and validation as related to automation of Space Station subsystems - Rationale for a knowledge based system lifecycle

The role of verification and validation (V and V) in software has been to support and strengthen the software lifecycle and to ensure that the resultant code meets the standards of the requirements documents. Knowledge-based system (KBS) V and V should serve the same role, but the KBS lifecycle is ill-defined. The rationale of a simple form of the KBS lifecycle is presented, including accommodation to certain critical KBS differences from software development.

Richardson, Keith↗
NASA NTRS1988

The pros and cons of code validation

Computational and wind tunnel error sources are examined and quantified using specific calculations of experimental data, and a substantial comparison of theoretical and experimental results, or a code validation, is discussed. Wind tunnel error sources considered include wall interference, sting effects, Reynolds number effects, flow quality and transition, and instrumentation such as strain gage balances, electronically scanned pressure systems, hot film gages, hot wire anemometers, and laser velocimeters. Computational error sources include math model equation sets, the solution algorithm, artificial viscosity/dissipation, boundary conditions, the uniqueness of solutions, grid resolution, turbulence modeling, and Reynolds number effects. It is concluded that, although improvements in theory are being made more quickly than in experiments, wind tunnel research has the advantage of the more realistic transition process of a right turbulence model in a free-transition test.

Bobbitt, Percy J.↗
NASA NTRS1988

Evidence flow graph methods for validation and verification of expert systems

This final report describes the results of an investigation into the use of evidence flow graph techniques for performing validation and verification of expert systems. This was approached by developing a translator to convert horn-clause rule bases into evidence flow graphs, a simulation program, and methods of analysis. These tools were then applied to a simple rule base which contained errors. It was found that the method was capable of identifying a variety of problems, for example that the order of presentation of input data or small changes in critical parameters could effect the output from a set of rules.

Becker, Lee A.↗
NASA NTRS1988

Extension and validation of a method for locating damaged members in large space trusses

The damage location approach employs the control system capabilities for the structure to test the structure and measure the dynamic response. The measurements are then used in a system identification algorithm to produce a model of the damaged structure. The model is compared to one for the undamaged structure to find regions of reduced stiffness which indicate the location of damage. Kabe's 3,4 stiffness matrix adjustment method was the central identification algorithm. The strength of his method is that, with minimal data, it preserves the representation of the physical connectivity of the structure in the resulting model of the damaged truss. However, extensive storage and computational effort were required as a result. Extension of the damage location method to overcome these problems is the first part of the current work. The central system identification algorithm is replaced with the MSMT method of stiffness matrix adjustment which was previously derived by generalizing an optimal-update secant method form quasi-Newton approaches for nonlinear optimization. Validation of the extended damage location method is the second goal.

Smith, Suzanne Weaver↗
NASA NTRS1988

Shock tube investigation of dynamic response of pressure transducers for validation of rotor performance measurements

For some time now, NASA has had a program under way to aid in the validation of rotor performance and acoustics codes associated with the UH-60 rotary-wing aircraft; and to correlate results of such studies with those obtained from investigations of other selected aircraft rotor performance. A central feature of these studies concerns the dynamic measurement of surface pressure at various locations up to frequencies of 25 KHz. For this purpose, fast-response gauges of the Kulite type are employed. The latter need to be buried in the rotor; they record surface pressures which are transmitted by a pipette connected to the gauge. The other end of the pipette is cut flush with the surface. In certain locations, the pipette configuration includes a rather sharp right-angle bend. The natural question has arisen in this connection: In what way are the pipettes modifying the signals received at the rotor surface and subsequently transmitted to the sensitive Kulite transducer element. The basic details and results of the program performed and recently completed in the High Pressure Shock Tube Laboratory of the Department of Aeronautics and Astronautics at Stanford University are given.

Bershader, Daniel↗