Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Tool”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

DEVELOPING NEW TOOLS FOR POLICY ANALYSIS

For the past three years, the Office of Security Policy has been aggressively pursuing substantial improvements in the U. S. Department of Energy (DOE) regulations and directives related to safeguards and security (S&S). An initial effort focused on areas where specific improvements could be made. This revision was completed during 2009 with the publication of a number of revised manuals. Developing these revisions involved more than 100 experts in the various disciplines involved, yet the changes made were only those that could be identified and agreed upon based largely on expert opinion. The next phase of changes will be more analytically based. A thorough review of the entire (S&S) directives set will be conducted using software tools to analyze the present directives with a view toward 1) identifying areas of positive synergism among topical areas, 2) identifying areas of unnecessary duplication within and among topical areas, and 3) identifying requirements that are less than effective in achieving the intended protection goals. This paper will describe the software tools available and in development that will be used in this effort. Some examples of the output of the tools will be included, as will a short discussion of the follow-on analysis that will be performed when these outputs are available to policy analysts.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Built Environment Energy Analysis Tool Overview (Presentation)

This presentation provides an overview of the Built Environment Energy Analysis Tool, which is designed to assess impacts of future land use/built environment patterns on transportation-related energy use and greenhouse gas (GHG) emissions. The tool can be used to evaluate a range of population distribution and urban design scenarios for 2030 and 2050. This tool was produced as part of the Transportation Energy Futures (TEF) project, a Department of Energy-sponsored multi-agency project initiated to pinpoint underexplored strategies for abating GHGs and reducing petroleum dependence related to transportation.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

EERE's State & Local Energy Data Tool

EERE's State and Local Energy Data (SLED) Tool provides basic energy market information that can help state and local governments plan and implement clean energy projects, including electricity generation; fuel sources and costs; applicable policies, regulations, and financial incentives; and renewable energy resource potential. Watch this video to learn more about the tool and hear testimonials from real users about the benefits of using this tool.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Distributed Wind Policy Comparison Tool

Power through Policy: 'Best Practices' for Cost-Effective Distributed Wind is a U.S. Department of Energy (DOE)-funded project to identify distributed wind technology policy best practices and to help policymakers, utilities, advocates, and consumers examine their effectiveness using a pro forma model. Incorporating a customized feed from the Database of State Incentives for Renewables and Efficiency (DSIRE), the Web-based Distributed Wind Policy Comparison Tool (Policy Tool) is designed to assist state, local, and utility officials in understanding the financial impacts of different policy options to help reduce the cost of distributed wind technologies. The Policy Tool can be used to evaluate the ways that a variety of federal and state policies and incentives impact the economics of distributed wind (and subsequently its expected market growth). It also allows policymakers to determine the impact of policy options, addressing market challenges identified in the U.S. DOE’s '20% Wind Energy by 2030' report and helping to meet COE targets.

distributed↗

Solar Data and Tools: Resources for Researchers, Industry, and Developers

In partnership with the U.S. Department of Energy SunShot Initiative, the National Renewable Energy Laboratory (NREL) has created a suite of analytical tools and data that can inform decisions about implementing solar and that are increasingly forming the basis of private-sector tools and services to solar consumers. The following solar energy data sets and analytical tools are available free to the public.

14 SOLAR ENERGY↗

A Machine-Learning Decision-Support Tool for Travel-Demand Modeling

Utility maximization(UM) models are the lifeblood of virtually all travel demand models (TDM) in practice. Be it the traditional travel demand models or more advanced activity-based models, utility maximization models are used extensively to model and predict myriad travel choices such as location choice, mode choice, route choice etc. More recently machine learning (ML) models are being applied in a variety of contexts to predict choice patterns (product suggestions on Amazon, restaurant suggestions on Yelp etc.,). In the TDM arena, there has been interest in incorporating ML models where they can enhance prediction accuracy. Though there have been sporadic efforts at comparing specific utility maximization models to machine learning models, there is a need for a standard comparison tool which can evaluate ML models against UM models for a given choice context. Addressing this need, we present a tool for applying an array of models including logit, nested logit, neural network, Naive Bayes and decision tree classifiers. The tool is specifically tailored to aid in the deciding the best model for a given choice context and can be used to choose an appropriate model family or to construct a model ensemble to improve upon current modeling standards in travel demand modeling. We test our proposed system on household vehicle count and work schedule targets from the 2017 National Household Travel Survey. Results demonstrate that for some variables, logit are not the most effective models, and the proposed system can aid in selecting a better model.

33 ADVANCED PROPULSION SYSTEMS↗

Data and Tools for Energy Planning and Analysis

The National Renewable Energy Laboratory (NREL) creates widely used data and tools to facilitate energy system planning and analysis. These software tools have been developed for complex research problems and perfected over real-world applications and laboratory validations. Some tools are award winners, others are open-source data explorers, and all are rigorously designed to empower decision-makers with accurate and accessible information. This software selection shows how NREL resources can help stakeholders achieve a clean, just, and resilient energy transformation.

data↗

Low-Income Energy Affordability Data (LEAD) Tool

The Low-income Energy Affordability Data (LEAD) tool was created to provide data, such as energy burden, to stakeholders to make data driven decisions. The LEAD Tool provides a starting point for local governments, NGOs, companies, etc. to find areas with higher energy burden and cost to inform decisions about funding distribution and program qualifications. This presentation was given to energy efficiency and conservation block grant program applicants to explain how this tool can help them develop their energy efficiency and conservation strategy.

ENERGY PLANNING, POLICY, AND ECONOMY↗

Status on Development of Graphite Analytical Tool (GAT)

The DOE-ART Graphite R&D program has been generating significant amounts of irradiated and unirradiated graphite data since 2006 when the program was part of the DOE NGNP (Next Generation Nuclear Plant) Project. This data includes critical irradiation creep and irradiated material property changes from the Advanced Graphite Creep (AGR) experiment as well as significant amounts of data on unirradiated material property values on several current nuclear graphite grades (Baseline program). Previously, Idaho National Laboratory has developed an internal analysis tool to assist with analysis of the unirradiated and irradiated data. The Graphite Analytical Tool (GAT) is intended to provide easy access to the graphite data in the form of comparing unirradiated and irradiated material property changes, comparison of material property differences between various nuclear graphite grades, and illustrate trends within the irradiated and unirradiated data generated within the DOE-ART Graphite R&D program. This report summarizes the progress to-date on the development of this analytical tool.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Identifying Energy Inefficiencies in Compressed Air Systems: A Systematic Approach with the Compressed Air Scoping Tool

This paper highlights the importance of improving compressed air systems, outlines the tool’s development and features, and underscores its value as a nonbiased resource for system evaluation and optimization. Additionally, the paper presents a case study based on a food manufacturing facility to demonstrate the practical application of the tool. Furthermore, the paper discusses potential future opportunities for enhancing the CA Scoping Tool.

compressed air benchmarking↗

Spray-Formed Tooling with Micro-Scale Features

Molds, dies, and related tooling are used to shape many of the plastic and metal components we use every day at home and work. Traditional mold-making practices are labor and capital equipment intensive, involving multiple machining, benching and heat treatment operations. Spray forming is an alternative method to manufacture molds and dies. The general concept is to atomize and deposit droplets of a tooling alloy onto a pattern to form a thick deposit while imaging the pattern’s shape, surface texture and details. Unlike conventional machining, this approach can be used to fabricate tooling with micro-scale surface features. This paper describes a research effort to spray form molds and dies that are used to image micro-scale surface textures into polymers. The goal of the study is to replicate textures that give rise to superhydrophobic behavior by mimicking the surface structure of highly water repellent biological materials such as the lotus leaf. Spray conditions leading to high transfer fidelity of features into the surface of molded polymers will be described. Improvements in water repellency of these materials was quantified by measuring the static contact angle of water droplets on flat and textured surfaces.

36 MATERIALS SCIENCE↗

Alternative Fuels Data Center and Related Technology Integration Tools

The U.S. Department of Energy's (DOE) Office of Energy Efficiency and Renewable Energy's Vehicle Technologies Office (VTO) facilitates national coordination of the Clean Cities coalitions through its Technology Integration Program. VTO's Technology Integration Program supports a broad technology portfolio that can reduce transportation energy costs for businesses and consumers. Fleets, cities, and regions can use the tools featured in this guide to implement alternative fuels and advanced vehicles. Also learn how Clean Cities coalitions and their stakeholders across the country have used the tools.

AFDC↗

A graph signal processing‐based multiple model Kalman filter ( GSP‐MMKF ) tool for predictive analytics: An air separation unit process application

Abstract The industrial Air Separations Unit (ASU) is a complicated and tightly operated process. The use of dynamic process analytics is also a key element of safe and economic operation of these processes, with increasing focus on predictive analytics to take preemptive actions. With the availability of real‐time data from hundreds of sensors, the data analysis process should also consider the topology of the data, as seen in sensor networks. In this paper, a novel tool is presented that considers the complex connectivity patterns in the sensor network and uses local adaptive disturbance estimations to predict global network‐scale trends. The paper introduces the emerging field of Graph Signal Processing (GSP) and presents a rigorous derivation of the tool starting from the extraction of the sensor‐network (in a graph theoretical sense) from the data. This network, which is in the form of a matrix, is then used to derive a Kalman‐filter type of state‐space model driven by input disturbances. Multiple disturbance models (e.g., step, ramp, periodic) are included to allow the model to have different kinds of disturbance propagation. Each graph node (representing the sensors used) dynamically adapts to the most recent detected disturbance individually. These estimated disturbances are propagated to the global network using the graph. Modifications to ensure stability are also discussed. The fidelity of the tool is tested on certain downtime events and the paper concludes by discussing the advantages of the method and planned future improvements.

Ghosh, Sambit↗

A Similarity-Based Analysis Tool for Porting OpenMP Applications. In: Facing the Multicore-Challenge III. Lecture Notes in Computer Science, vol 7686.

Exascale computers are expected to exhibit an unprecedented level of complexity, thereby posing significant challenges for porting applications to these new systems. One of the ways to support this transition is to create tools that allow their users to benefit from prior successful porting experiences. The key to such an approach is the manner in which we define source code similarity, and whether similar codes can be ported in the same way to a given system. In this paper, we propose a novel approach based on the notion of similarity that uses static and dynamic code features to check if two serial subroutines can be ported with the same OpenMP strategy. Our approach creates an annotated family distance tree based on the syntactic structure of subroutines, where subroutines that belong to the same syntactic family and share the similar code features have a greater potential to be optimized in the same way. We describe the design and implementation of a tool, based upon a compiler and performance tool, that is used to gather the data to build this porting planning tree. We then validate our approach by analyzing the similarity in subroutines of the serial version of the NAS benchmarks and comparing how they were ported in the OpenMP version of the suite.

Ding, Wei↗

Chapter 8: Planning Tools to Simulate and Optimize Neighborhood Energy Systems

This section introduces different energy modeling tools available in Europe and the USA for community energy master planning process varying from strategic Urban Energy Planning to more detailed Local Energy Planning. Two modeling tools used for Energy Master Planning of primarily residential communities, the 3D city model with CityGML, and the Net Zero Planner tool developed for the US Department of Defense installations are described in more details.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Economic Consequence Analysis of Disasters: The ECAT Software Tool

This study develops a methodology for rapidly obtaining approximate estimates of the economic consequences from numerous natural, man-made and technological threats. This software tool is intended for use by various decision makers and analysts to obtain estimates rapidly. It is programmed in Excel and Visual Basic for Applications (VBA) to facilitate its use. This tool is called E-CAT (Economic Consequence Analysis Tool) and accounts for the cumulative direct and indirect impacts (including resilience and behavioral factors that significantly affect base estimates) on the U.S. economy. E-CAT is intended to be a major step toward advancing the current state of economic consequence analysis (ECA) and also contributing to and developing interest in further research into complex but rapid turnaround approaches. The essence of the methodology involves running numerous simulations in a computable general equilibrium (CGE) model for each threat, yielding synthetic data for the estimation of a single regression equation based on the identification of key explanatory variables (threat characteristics and background conditions). This transforms the results of a complex model, which is beyond the reach of most users, into a "reduced form" model that is readily comprehensible. Functionality has been built into E-CAT so that its users can switch various consequence categories on and off in order to create customized profiles of economic consequences of numerous risk events. E-CAT incorporates uncertainty on both the input and output side in the course of the analysis.

Environmental Economics↗

Deep-learning based artificial intelligence tool for melt pools and defect segmentation

Accelerating fabrication of additively manufactured components with precise microstructures is important for quality and qualification of built parts, as well as for a fundamental understanding of process improvement. Accomplishing this requires fast and robust characterization of melt pool geometries and structural defects in images. This paper proposes a pragmatic approach based on implementation of deep learning models and self-consistent workflow that enable systematic segmentation of defects and melt pools in optical images. Deep learning is based on an image-to-image translation–conditional generative adversarial neural network architecture. An artificial intelligence (AI) tool based on this deep learning model enables fast and incrementally more accurate predictions of the prevalent geometric features, including melt pool boundaries and printing-induced structural defects. We present statistical analysis of geometric features that is enabled by the AI tool, showing strong spatial correlation of defects and the melt pool boundaries. The correlations of widths and heights of melt pools with dataset processing parameters show the highest sensitivity to thermal influences resulting from laser passes in adjacent and subsequent layer passes. The presented models and tools are demonstrated on the aluminum alloy and datasets produced with different sets of processing parameters. However, they have universal quality and could easily be adapted to different material compositions. The method can be easily generalized to microstructural characterizations other than optical microscopy.

additive manufacturing↗

Replacement of Nitrided 33CrMoV Steel with ESR Hot Work Tool Steels for Motorsport Applications: Microstructural and Fatigue Characterization

In this work tensile strength, fatigue resistance and fracture toughness of two electroslag remelted (ESR) tool steels and of 33CrMoV12 ESR steel (both in quenched and tempered condition, as well as nitrided condition) were evaluated. The role of hardness, residual stresses and inclusion sizes on the fatigue behavior was investigated. Tool steels have a tensile strength between about 1900 and 2300 MPa, fracture toughness between 35 and 33 MPa√m, while fatigue strength ranges between 725 and 992 MPa. The tensile strength and fracture toughness of the 33CrMoV12 ESR are, respectively, 1365 MPa and about 150 MPa√m. Nitriding induces a significant increase in fatigue strength from 560 to 980 MPa. These results highlight that appropriate ESR tool steels could replace nitrided steels.

36 MATERIALS SCIENCE↗