Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TIME FUNCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Time-parallel solutions to differential equations via functional optimization

We describe an approach to solving a generic time-dependent differential equation (DE) that recasts the problem as a functional optimization one. The techniques employed to solve for the functional minimum, which we relate to the Sobolev Gradient method, allow for large-scale parallelization in time, and therefore potential faster “wall-clock” time computing on machines with significant parallel computing capacity. We are able to come up with numerous different discretizations and approximations for our optimization-derived equations, each of which either puts an existing approach, the Parareal method, in an optimization context, or provides a new time-parallel (TP) scheme with potentially faster convergence to the DE solution. We describe how the approach is particularly effective for solving multiscale DEs and present TP schemes that incorporate two different solution scales. Sample results are provided for three differential equations, solved with TP schemes, and we discuss how the choice of TP scheme can have an orders of magnitude effect on the accuracy or convergence rate.

97 MATHEMATICS AND COMPUTING↗

Determination of mean surface position and sea state from the radar return of a short-pulse satellite altimeter

Using the specular point theory of scatter from a very rough surface, the average backscatter cross section per unit area per radar cell width is derived for a cell located at a given height above the mean sea surface. This result is then applied to predict the average radar cross section observed by a short-pulse altimeter as a function of time for two modes of operation: pulse-limited and beam-limited configurations. For a pulse-limited satellite altimeter, a family of curves is calculated showing the distortion of the leading edge of the receiver output signal as a function of sea state (i.e., wind speed). A signal processing scheme is discussed that permits an accurate determination of the mean surface position--even in high seas--and, as a by-product, the estimation of the significant seawave height (or wind speed above the surface). Comparison of these analytical results with experimental data for both pulse-limited and beam-limited operation lends credence to the model. Such a model should aid in the design of short-pulse altimeters for accurate determination of the geoid over the oceans, as well as for the use of such altimeters for orbital sea-state monitoring.

Barrick, D. E.↗

Postprocessing for the UCLA climate model

Postprocessing programs written to analyze the results of a general circulation model are described. The model history data is interpolated to pressure surfaces, converted from 64-bit Cyber words to 32 bit IBM words, and transferred to tape for further analysis. The time average program reads the interpolation output tape and produces 15-day time averages. The model outputs a very detailed record for selected grid points. This data is sent to a tape in Cyber full words. The conversion program changes the format of the tape from 64 bit Cyber words to 32 bit IBM words, processing a month of data at a time. The grid-point history sorting program inputs the converted grid point history tape and sorts it by time. The end product is a tape with a time history of each field for every point. After the PBP data has been stored, it can be plotted. The plotting package is flexible, and allows the choice of fields and grid points. The one-dimensional fields are plotted as functions of time, and a daily summary is also produced. For the two-dimensional fields, time-height cross sections and daily summaries are produced. The model plotting package produces plots for all fields on the time average and pressure tapes. These plots include world maps, polar projections, zonal means, vectors, streamlines, and latitude-height plots.

Abeles, J.↗

Propagation of quasifracture in viscoelastic media under low-cycle repeated stressing

The propagation of a craze as quasifracture under repeated cyclic stressing in polymeric systems has been under intensive investigation recently. Based upon a time-dependent crazing theory, the governing differential equation describing the propagation of a single craze as quasifracture in an infinite viscoelastic plate has been solved for sinusoidal stresses. Numerical methods have been employed to obtain the normalized craze length as a function of time. The computed results indicate that the length of a quasifracture may decelerate and decrease indicating that its velocity can reverse. This behavior may be consistent with the observed and much discussed craze healing and the enclosure model in fatigue and fracture of solids.

Liu, X. P.↗

Venus radar mapper attitude reference quaternion

Polynomial functions of time are used to specify the components of the quaternion which represents the nominal attitude of the Venus Radar mapper spacecraft during mapping. The following constraints must be satisfied in order to obtain acceptable synthetic array radar data: the nominal attitude function must have a large dynamic range, the sensor orientation must be known very accurately, the attitude reference function must use as little memory as possible, and the spacecraft must operate autonomously. Fitting polynomials to the components of the desired quaternion function is a straightforward method for providing a very dynamic nominal attitude using a minimum amount of on-board computer resources. Although the attitude from the polynomials may not be exactly the one requested by the radar designers, the polynomial coefficients are known, so they do not contribute to the attitude uncertainty. Frequent coefficient updates are not required, so the spacecraft can operate autonomously.

Lyons, D. T.↗

Phonon relaxation time reconstruction from transient thermal grating experiments and comparison with density functional theory predictions

Phonon relaxation time and free path distributions are reconstructed from experimental measurements on a two-dimensional transient thermal grating and compared with density functional theory (DFT) results for silicon. The reconstruction is performed using the inverse problem formulation of Forghani et al. [Phys. Rev. B 94, 155439 (2016)]. The discrepancies observed between reconstructed and DFT results are analyzed in terms of the ability of each set of data to reproduce the experimental temperature relaxation profiles; the reconstructed data are found to predict temperature profiles in closer agreement with the experimental data than the DFT results, possibly due to discrepancies between the actual material and the idealized model studied in the DFT calculations. The reconstructed phonon properties accurately predict temperature relaxation profiles at grating length scales smaller than those spanned by the experimental data. Finally, this is a very important feature since in a variety of experimental setups, including the one providing the data in the present study, measurements are not available at all scales spanned by the material free paths.

42 ENGINEERING↗

Effect of Time Window and Spectral Measurement Options on Empirical Green’s Function Analysis Using DAS Array and Seismic Stations

The recorded seismic waveform is a convolution of event source term, path term, and station term. Removing high-frequency attenuation due to path effect is a challenging problem. Empirical Green’s function (EGF) method uses nearly collocated small earthquakes to correct the path and station terms for larger events recorded at the same station. However, this method is subject to variability due to many factors. Here, we focus on three events that were well recorded by the seismic network and a rapid response distributed acoustic sensing (DAS) array. Using a suite of high-quality EGF events, we assess the influence of time window, spectral measurement options, and types of data on the spectral ratio and relative source time function (RSTF) results. Increased number of tapers (from 2 to 16) tends to increase the measured corner frequency and reduce the source complexity. Extended long time window (e.g., 30 s) tends to produce larger variability of corner frequency. The multitaper algorithm that simultaneously optimizes both target and EGF spectra produces the most stable corner-frequency measurements. The stacked spectral ratio and RSTF from the DAS array are more stable than two nearby seismic stations, and are comparable to stacked results from the seismic network, suggesting that DAS array has strong potential in source characterization.

58 GEOSCIENCES↗

Ab initio molecular dynamics simulation of supercritical aqueous ionic solutions: Spectral diffusion of water in the vicinity of Br¯ and I¯ ions

Supercritical aqueous ionic solutions containing bromide (Br¯) and iodide (I¯) ions have been studied using Car-Parrinello molecular dynamics simulation at two different concentrations and at two different densities. The time dependent trajectory has been used for calculating vibrational spectral diffusion, structural properties and, for other dynamical properties such as hydrogen bond dynamics, orientational relaxation and residence dynamics. The vibrational spectral diffusion of fluctuating OD stretch mode inside the solvation shell of the ions and in the bulk has been studied using frequency-frequency time correlation function. Hydrogen bond dynamics, orientational relaxation and residence dynamics of Sc-water have been investigated using population correlation function approach. The water molecules inside the solvation shell of Br¯ and I¯ ions are found to show complex molecular dynamics in comparison to the water-water dynamics. The concentration dependent spectral diffusion has been observed and it occurs in multiple time scales in the solvation shell of Br¯ and I¯ ions. Here, at supercritical condition, the ion-water hydrogen bond shows faster dynamics with respect to the same at ambient condition and slower dynamics with respect to the water-water hydrogen bond dynamics at supercritical condition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transient processes in the parametric interaction of counter-propagating waves

We present a comparative analysis of transient processes in media with a negative refractive index for the parametric interaction of co- and counter-propagating waves. The transient time for the interaction of counter-propagating waves is shown to considerably exceed that for the interaction of co-propagating waves. In the case of counter-propagating waves, we present fitting results for the generated wave amplitude as a function of time and for the transient time vs. the amplitude of the pump wave and the length of the medium. (optical metamaterials)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase-bunching and other non-linear processes occurring in gyroresonant wave-particle interactions

Consideration of the movement of individual electrons in a magnetized plasma in which a monochromatic wave is propagating in the whistler mode. Simple expressions are derived which give the displacement of the electrons as a function of time, the phase angle that their velocity vector makes with the magnetic component of the wave, their pitch angle, and energy changes. A useful formula is obtained which gives the velocity range over which particles remain trapped inside the wave, as a function of the wave intensity and of the initial phase angle of the particle. It is shown that even strictly resonant particles can escape from the wave when their initial phase angle is very small. From the derived expressions, it is possible to compute the phase-bunching effect which occurs approximately at one trapping wavelength behind the leading edge of the interaction region.

Gendrin, R.↗

Cloud volume studies

A time history of cloud growth for the Titan 3 launch was obtained by using optical data provided by three Askania trackers (position of the cloud) and three Hasselblad cameras (cloud volume). Two quasi-independent measurements of ground cloud volume as a function of time were obtained. Aircraft time in the cloud, as measured by the rapid response nephelometer onboard the aircraft, was used for determining cloud volume. Cloud volume from aircraft measurements for the entire operation is summarized.

Bendura, R. J.↗

A minimum entropy principle in the gas dynamics equations

Let u(x bar,t) be a weak solution of the Euler equations, governing the inviscid polytropic gas dynamics; in addition, u(x bar, t) is assumed to respect the usual entropy conditions connected with the conservative Euler equations. We show that such entropy solutions of the gas dynamics equations satisfy a minimum entropy principle, namely, that the spatial minimum of their specific entropy, (Ess inf s(u(x,t)))/x, is an increasing function of time. This principle equally applies to discrete approximations of the Euler equations such as the Godunov-type and Lax-Friedrichs schemes. Our derivation of this minimum principle makes use of the fact that there is a family of generalized entrophy functions connected with the conservative Euler equations.

Tadmor, E.↗

Response to reflected-force feedback to fingers in teleoperations

Reflected-force feedback is an important aspect of teleoperations. The objective is to determine the ability of the human operator to respond to that force. Telerobotics operation is simulated by computer control of a motor-driven device with capabilities for programmable force feedback and force measurement. A computer-controlled motor drive is developed that provides forces against the fingers as well as (angular) position control. A load cell moves in a circular arc as it is pushed by a finger and measures reaction forces on the finger. The force exerted by the finger on the load cell and the angular position are digitized and recorded as a function of time by the computer. Flexure forces of the index, long and ring fingers of the human hand in opposition to the motor driven load cell are investigated. Results of the following experiments are presented: (1) Exertion of maximum finger force as a function of angle; (2) Exertion of target finger force against a computer controlled force; and (3) Test of the ability to move to a target force against a force that is a function of position. Averaged over ten individuals, the maximum force that could be exerted by the index or long finger is about 50 Newtons, while that of the ring finger is about 40 Newtons. From the tests of the ability of a subject to exert a target force, it was concluded that reflected-force feedback can be achieved with the direct kinesthetic perception of force without the use of tactile or visual clues.

Sutter, P. H.↗

Kinetic Tetrazolium Microtiter Assay

Kinetic tetrazolium microtiter assay (KTMA) involves use of tetrazolium salts and Triton X-100 (or equivalent), nontoxic, in vitro color developer solubilizing colored metabolite formazan without injuring or killing metabolizing cells. Provides for continuous measurement of metabolism and makes possible to determine rate of action of antimicrobial agent in real time as well as determines effective inhibitory concentrations. Used to monitor growth after addition of stimulatory compounds. Provides for kinetic determination of efficacy of biocide, greatly increasing reliability and precision of results. Also used to determine relative effectiveness of antimicrobial agent as function of time. Capability of generating results on day of test extremely important in treatment of water and waste, disinfection of hospital rooms, and in pharmaceutical, agricultural, and food-processing industries. Assay also used in many aspects of cell biology.

Pierson, Duane L.↗

Atomic Oxygen Fluence Monitor

This innovation enables a means for actively measuring atomic oxygen fluence (accumulated atoms of atomic oxygen per area) that has impinged upon spacecraft surfaces. Telemetered data from the device provides spacecraft designers, researchers, and mission managers with real-time measurement of atomic oxygen fluence, which is useful for prediction of the durability of spacecraft materials and components. The innovation is a compact fluence measuring device that allows in-space measurement and transmittance of measured atomic oxygen fluence as a function of time based on atomic oxygen erosion yields (the erosion yield of a material is the volume of material that is oxidized per incident oxygen atom) of materials that have been measured in low Earth orbit. It has a linear electrical response to atomic oxygen fluence, and is capable of measuring high atomic oxygen fluences (up to >10(exp 22) atoms/sq cm), which are representative of multi-year low-Earth orbital missions (such as the International Space Station). The durability or remaining structural lifetime of solar arrays that consist of polymer blankets on which the solar cells are attached can be predicted if one knows the atomic oxygen fluence that the solar array blanket has been exposed to. In addition, numerous organizations that launch space experiments into low-Earth orbit want to know the accumulated atomic oxygen fluence that their materials or components have been exposed to. The device is based on the erosion yield of pyrolytic graphite. It uses two 12deg inclined wedges of graphite that are over a grit-blasted fused silica window covering a photodiode. As the wedges erode, a greater area of solar illumination reaches the photodiode. A reference photodiode is also used that receives unobstructed solar illumination and is oriented in the same direction as the pyrolytic graphite covered photodiode. The short-circuit current from the photodiodes is measured and either sent to an onboard data logger, or transmitted to a receiving station on Earth. By comparison of the short-circuit currents from the fluence-measuring photodiode and the reference photodiode, one can compute the accumulated atomic oxygen fluence arriving in the direction that the fluence monitor is pointing. The device produces a signal that is linear with atomic oxygen fluence using a material whose atomic oxygen erosion yield has been measured over a period of several years in low-Earth orbit.

Banks, Bruce A.↗

Utilizing Thermal Mass in Refrigerated Display Cases to Reduce Peak Demand

The potential to store energy within refrigerated food products presents convenience store and supermarket operators with an opportunity to participate in utility sponsored demand response programs, whereby electricity usage can be shifted or reduced during peak periods. To determine the feasibility of reducing peak demand by shifting the refrigeration load to off-peak times, experimental and analytical analyses were performed. Simulated product, consisting of one-pint containers filled with a 50% ethylene glycol and 50% water solution, were stored in a medium-temperature vertical open refrigerated display case. Product temperature rise as a function of time was determined by turning off the refrigeration to the display case, while product temperature pull-down time was subsequently determined by turning on the refrigeration to the display case. It was found that the thermal mass of the product in a medium-temperature display case was such that during a 2.5 hour period with no refrigeration, the average product temperature increased by 5.5 C. In addition, it took approximately 3.5 hours for the product to recover to its initial temperature after the refrigeration was turned on. Transient heat conduction analyses for one-dimensional objects is in good agreement with the experimental results obtained in this study. From the analysis, it appears that the thermal mass of the stored product in refrigerated display cases is sufficient to allow product temperatures to safely drift for a significant time under reduced refrigeration system operation. Thus, strategies for shifting refrigeration system electrical demand can be developed. The use of an advanced refrigeration system controller that can respond to utility signals can enable demand shifting with minimal impact.

Fricke, Brian A↗

Combining Inspection and Unattended Monitoring: Statistical Analysis of Timely Detection

Process monitoring traditionally relies on facility operator measurements. New concepts for future inspection regimes include inspectorate-owned systems that enable unattended monitoring (UM) of all declared material flow \cite{smith_potential}. If such systems can be established as viable alternatives, they may provide an important new capability: a true inspector's estimate of MUF that can achieve the efficiency and effectiveness goals outlined by the IAEA. A rigorous statistical framework for comparing traditional and new methodologies is needed to evaluate this potential and enable inspectorates to optimally balance UM and sampling in the context of timely detection and cost constraints. Recognizing that these are only two among a wide range of safeguards activities that support mass balance evaluation to detect missing material, this paper compares UM to traditional safeguards sampling in terms of detection probabilities as a function of time based on simplistic material loss scenarios, and shows how the detection probabilities can be rather easily combined. Using this approach can help enable tradeoff analysis and optimal resource allocation.

international safeguards↗

Probabilistic Assessment of Cancer Risk for Astronauts on Lunar Missions

During future lunar missions, exposure to solar particle events (SPEs) is a major safety concern for crew members during extra-vehicular activities (EVAs) on the lunar surface or Earth-to-moon transit. NASA s new lunar program anticipates that up to 15% of crew time may be on EVA, with minimal radiation shielding. For the operational challenge to respond to events of unknown size and duration, a probabilistic risk assessment approach is essential for mission planning and design. Using the historical database of proton measurements during the past 5 solar cycles, a typical hazard function for SPE occurrence was defined using a non-homogeneous Poisson model as a function of time within a non-specific future solar cycle of 4000 days duration. Distributions ranging from the 5th to 95th percentile of particle fluences for a specified mission period were simulated. Organ doses corresponding to particle fluences at the median and at the 95th percentile for a specified mission period were assessed using NASA s baryon transport model, BRYNTRN. The cancer fatality risk for astronauts as functions of age, gender, and solar cycle activity were then analyzed. The probability of exceeding the NASA 30- day limit of blood forming organ (BFO) dose inside a typical spacecraft was calculated. Future work will involve using this probabilistic risk assessment approach to SPE forecasting, combined with a probabilistic approach to the radiobiological factors that contribute to the uncertainties in projecting cancer risks.

Kim, Myung-Hee Y.↗