Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surfaced Polymers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Developing a model for the impact of non-conformal lithium contact on electro-chemo-mechanics and dendrite growth

Lithium dendrite growth hinders the use of lithium metal anodes in commercial batteries. We present a 3D model to study the mechanical and electrochemical mechanisms that drive microscale plating. With this model, we investigate electrochemical response across a lithium protrusion characteristic of rough anode surfaces, representing the separator as a porous polymer in non-conformal contact with a lithium anode. The impact of pressure on separator morphology and electrochemical response is of particular interest, as external pressure can improve cell performance. We explore the relationships between plating propensity, stack pressure, and material properties. External pressure suppresses lithium plating due to interfacial stress and separator pore closure, leading to inhomogeneous plating rates. For moderate pressures, dendrite growth is completely suppressed, as plating will occur in the electrolyte-filled gaps between anode and separator. In fast-charging conditions and systems with low electrolyte diffusivities, the benefits of pressure are overridden by ion transport limitations.

25 ENERGY STORAGE↗

Infrared Chemical Nano-Imaging: Accessing Structure, Coupling, and Dynamics on Molecular Length Scales

This Perspective highlights recent advances in infrared vibrational chemical nano-imaging. In its implementations of scattering scanning near-field optical microscopy (s-SNOM) and photothermal-induced resonance (PTIR), IR nanospectroscopy provides few-nanometer spatial resolution for the investigation of polymer, biomaterial, and related soft-matter surfaces and nanostructures. Broad-band IR s-SNOM with coherent laser and synchrotron sources allows for chemical recognition with small-ensemble sensitivity and the potential for sensitivity reaching the single-molecule limit. Probing selected vibrational marker resonances, it gives access to nanoscale chemical imaging of composition, domain morphologies, order/disorder, molecular orientation, or crystallographic phases. Local intra- and intermolecular coupling can be measured through frequency shifts of a vibrational marker in heterogeneous environments and associated inhomogeneities in vibrational dephasing. In combination with ultrafast spectroscopy, the vibrational coherent evolution of homogeneous sub-ensembles coupled to their environment can be observed. Outstanding challenges are discussed in terms of extensions to coherent and multidimensional spectroscopies, implementation in liquid and in situ environments, general sample limitations, and engineering s-SNOM scanning probes to better control the nano-localized optical excitation and to increase sensitivity.

Environmental Molecular Sciences Laboratory↗

Understanding the ordering mechanisms of self-assembled nanostructures of block copolymers during zone annealing

A theoretical method based on dynamic version of self-consistent field theory is extended to investigate directed self-assembly behaviors of block copolymers subjected to zone annealing. The ordering mechanisms and orientation modulation of microphase-separated nanostructures of block copolymers are discussed in terms of sweep velocity, wall preference, and Flory-Huggins interaction parameter. The simulated results demonstrate that the long-range ordered nanopatterns are achieved by lowering the sweep velocity of zone annealing due to the incorporation of templated ordering of block copolymers. The surface enrichment by one of the two polymer species induces the orientation modulation of defect-free nanostructures through finely tuning the composition of block copolymers and the preference of walls. Additionally, the Flory-Huggins interaction parameters of block copolymers in the distinct regions are main factors to design the zone annealing process for creating the highly ordered nanostructures with single orientation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Femtosecond-laser fabrication of cyclic structures in the bulk of transparent dielectrics

We report the results of the experiments on developing precision micromachining technology, obtained under the conditions of focusing the pulses of a femtosecond (FS) laser into the volume of a transparent material, which is important, particularly, in the processing of biomaterials in ophthalmology. The implementation conditions and some characteristic features of the special regime of micromachining are determined, when at a definite relation between the sample scanning velocity and the repetition rate of FS pulses the region, destroyed by the laser radiation, is shifted along the optical axis towards the objective and back, forming cyclic patterns inside the sample. It is supposed that the main causes of the damage region shift are the induced modification of the refractive index and the reduction of the damage threshold due to the change in the material density and structure in the microscopic domain, adjacent to the boundary of the cavity produced by the previous pulse. The results of the performed study with the above regime taken into account were used in the technology of precision cutting of crystals, glasses and polymers. The best quality of the cut surface is achieved under the conditions, eliminating the appearance of the cyclic regime. In the samples of polycarbonate, polymethyl methacrylate and fused silica the cylindrical cavities were obtained with the aspect ratio higher than 200, directed along the laser beam, and microcapillaries with the diameter 1 – 2 μm in the direction, perpendicular to this beam. (interaction of laser radiation with matter)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Potentiostatic and Potential Cycling Dissolution of Polycrystalline Platinum and Platinum Nano-Particle Fuel Cell Catalysts

The dissolution of Pt in aqueous electrolytes has been studied for over forty years, most recently in the context of understanding the observed loss in electrochemically-active surface area (ECA) of cathode electrocatalysts in polymer electrolyte fuel cells. Despite extensive research, there are many unresolved issues regarding the dissolution of nano-particle Pt, such as the source of the observed potential dependence of potentiostatic and potential cycling dissolution rates. To help resolve these issues, in this paper we present results of measurements of the concentration of dissolved Pt and Pt dissolution rates for carbon-supported platinum nano-particles (Pt/C) in dilute perchloric acid, as a mimic of the PEFC cathode environment, as a function of potential and upper potential limit of potential cycling. Also presented, for comparison, are results of similar studies on polycrystalline platinum. In situ Pt L III X-ray absorption spectroscopy was used to determine the extent of oxidation, the coordination environment, and loss of Pt from the Pt nano-particles to elucidate the mechanism of Pt dissolution. Finally, based on the correlation of these studies with those presented in the literature, mechanisms for Pt dissolution under potentiostatic and potential cycling conditions are proposed.

36 MATERIALS SCIENCE↗

Solvent Oligomerization during SEI Formation on Model Systems for Li-Ion Battery Anodes

We report the results of electrochemical quartz crystal microbalance (EQCM), and matrix assisted laser desorption ionization (MALDI) time of flight (TOF) mass spectrometry (MS) measurements along with detailed calculations examining the formation of the solid electrolyte interphase (SEI) on battery anode electrodes. EQCM analysis of Au and Sn surfaces in propylene carbonate (PC) and a 1:1 mixture of ethylene carbonate and dimethyl carbonate (EC:DMC) showed major irreversible mass uptake by the electrode surface especially during the first five cycles between +2 and 0.1 V vs. Li/Li+. MALDI-MS on emersed electrodes showed that long chain (m/z = 3000 on PC) oligomerized species were present on Au surfaces in PC and EC:DMC solvents, where oligomerized species formed in PC solutions showed higher mass ratios. The repeating units of the oligomer, visible as oscillations in the MALDI-MS, vary with the type of the solvent and electrode material. Sn surfaces initially showed formation of long chain polymers, but this material was not in evidence on electrode emersed after five cycles, which likely arises as a consequence of the catalytic involvement of Sn in decomposition of initially formed species. Density functional theory (DFT) calculations of cyclic solvent molecules suggested a radical initiated polymerization mechanism and predict oligomer subunits consistent with the experimental results.

25 ENERGY STORAGE↗

Characterization of proton exchange membrane materials for fuel cells by solid state nuclear magnetic resonance

Solid-state nuclear magnetic resonance (NMR) has been used to explore the nanometer-scale structure of Nafion, the widely used fuel cell membrane, and its composites. We have shown that solid-state NMR can characterize chemical structure and composition, domain size and morphology, internuclear distances, molecular dynamics, etc. The newly-developed water channel model of Nafion has been confirmed, and important characteristic length-scales established. Nafion-based organic and inorganic composites with special properties have also been characterized and their structures elucidated. The morphology of Nafion varies with hydration level, and is reflected in the changes in surface-to-volume (S/V) ratio of the polymer obtained by small-angle X-ray scattering (SAXS). The S/V ratios of different Nafion models have been evaluated numerically. It has been found that only the water channel model gives the measured S/V ratios in the normal hydration range of a working fuel cell, while dispersed water molecules and polymer ribbons account for the structures at low and high hydration levels, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Biomedical applications of ion-beam technology

Microscopically-rough surface texture of various biocompatible alloys and polymers produced by ion-beam sputtering may result in improvements in response of hard or soft tissue to various surgical implants.

Banks, B. A.↗

Pressurized Paraboloidal Solar Concentrator

Pressurized paraboloidal solar concentrator has high concentration ratio and is easy to maintain. Gas pressure forces reflecting film into contact with paraboloidal substrate. Reflective surface, which is low-cost metalized polymer film, can be quickly and easily replaced making new design less expensive to produce.

Cleland, E. L.↗

New acousto-ultrasonic techniques applied to aerospace materials

The use of an NdYAG pulsed laser for generating ultrasonic waves for NDE in resin matrix composites was investigated. A study was conducted of the use of the 1.064 micron wavelength NdYAG pulsed laser with the neat, unreinforced resin as well as graphite fiber/polymer composite specimens. In the case of the neat resins it was found that, at normal incidence, about 25 percent of the laser pulse energy was reflected at the incident surface. An attenuation coefficient for the polyimide resin, PMR-15 was determined to be approximately 5.8 np/cm. It was found in energy balance studies that graphite fiber/polymer specimens attenuate the laser beam more than do neat resins. The increase absorption is in the graphite fibers. The occurrence of laser induced surface damage was also studied. For the polymer neat resin, damage appears as pit formation over a small fraction of the pulse impact area and discoloration over a larger part of the area. A damage threshold was inferred from observed damage as a function of pulse energy. The 600 F cured PMR-15 and PMR-11 exhibit about the same amount of damage for a given laser pulse energy. The damage threshold is between 0.06 and 0.07 J/sq cm.

Kautz, Harold E.↗

High-strength porous carbon and its multifunctional applications

High-strength porous carbon and a method of its manufacture are described for multifunctional applications, such as ballistic protection, structural components, ultracapacitor electrodes, gas storage, and radiation shielding. The carbon is produced from a polymer precursor via carbonization, and optionally by surface activation and post-treatment.

36 MATERIALS SCIENCE↗

Filtration device for rapid separation of biological particles from complex matrices

Methods and systems for filtering of biological particles are disclosed. Filtering membranes separate adjacent chambers. Through osmotic or electrokinetic processes, flow of particles is carried out through the filtering membranes. Cells, viruses and cell waste can be filtered depending on the size of the pores of the membrane. A polymer brush can be applied to a surface of the membrane to enhance filtering and prevent fouling.

47 OTHER INSTRUMENTATION↗

Surface Charge Distribution Mapping Using an Electrostatic Probe

Undesired accumulation of charge on dielectric materials causing electrostatic discharges can be an issue in pulsed power systems and electrical systems in general. As such, an understanding of surface charge distribution, charge accumulation, and decay is required. An in-house no-contact electrostatic probe designed with a 2 mm resolution was fabricated to measure and map surface charge distribution. Designed as a contactless instrument, the probe consisting of a metal rod and low leakage amplifier circuit probes the electric potential near the surface. A scan of the surface then provides the raw data, a potential distribution. The actual probe response - i.e., the surface charge to voltage transfer function, is accounted for in post-processing. This is accomplished via an Inverse Wien Filter - a technique often applied in image processing - to deconvolve the probe response from the measured data. A commercially available electrostatic probe, the Trek 341B meter with a 3455ET probe, capable of measuring +/- 20 kV was compared to the in- house probe that is designed to cover a wider range from +/- 35 kV. A resolution better than the simple probe resolution is achieved through the distribution’s scanning voltage method and deconvolution. Applying repeated scans, surface charge decay was tracked on various polymer materials to determine the material and environment dependence; materials included were PA6, PTFE, and others. As an example of material dependence, samples charged to 20 kV at 65% humidity experience full charge decay in approximately 45 seconds for PA5 (152 mm dia.), while it took about 100 times longer for PTFE (51 mm dia.) to observe the same decay/redistribution of charge.

36 MATERIALS SCIENCE↗

Fabrication of low blaze angle gratings by replication and plasma etch

We suggest a new method of making ultra-low blaze angle gratings for synchrotron application. The method is based on reduction of the blaze angle of a master grating by replication followed by a plasma etch. A master blazed grating with a relatively large blaze angle is fabricated by anisotropic wet etching of a Si single crystal substrate. The surface of the master grating is replicated by a polymer material on top of a quartz substrate by nanoimprinting and then transferred into quartz by a plasma etch. Then a 2nd nanoimprint step is applied to transfer the saw-tooth surface into a resist layer on top of a Si grating substrate. The plasma etch through the patterned resist layer provides transfer of the grooves into the Si substrate and results in reduction of the blaze angle due to the difference in etch rates of the resist and Si. We investigated the impact of the replication process on the groove shape, facet surface roughness, and diffraction efficiency of the fabricated 200 lines/mm low blaze angle grating.

Park, Sooyeon↗

Fully Recyclable Advanced Composites with Reduced Cure Times for Improved Manufacturing Efficiency

At Cyclotron Road, the participant team from Mallinda focused its research efforts on developing its Polyimine chemistry for commercial applications. The value-differentiating characteristics of the technology are predicated on the chemical reversibility of the system which opens the door for a number of industrial applications. In short, the company’s technology is a highly crosslinked thermoset polymer network that can exchange covalent bonds within the polymer matrix when the polymer is heated to the glass transition temperature of the material. This leads to a resin system that can alternate between rigid and semi-rigid states; allowing for compression molding, and surface welding of thermosetting composite materials made with polyimine polymers. This research project worked towards improving the thermal properties of its resin from 80 °C to over 260 °C. The improved properties of Mallinda’s resin unlocks development potential within the automotive and aerospace markets where advance composite materials require stringent performance requirements and elevated operating temperatures.

36 MATERIALS SCIENCE↗

Dual-Responsive Macromolecular Surfaces with Binary Patterns

The development of nanopatterned interfaces incorporating multiple stimuli-responsive polymers has great potential for advancing smart sensors and molecular capture devices, yet it remains challenging due to limitations in patterning techniques and “grafting from” methods. Here, we present a binary-patterned surface featuring honeycomb-shaped photothermal polypyrrole (PPy) and thermally responsive poly(ethylene glycol methyl ether acrylate-co-poly(ethylene glycol) methyl ether acrylate) [poly(EGMEA-co-PEGMEA)] brushes within the cavities, fabricated using colloidal lithography and surface-initiated photoinduced electron transfer-reversible addition–fragmentation chain transfer (SI-PET-RAFT) polymerization. The morphology of the surface can be precisely tuned by adjusting the height of each domain. This design integrates unique topographical features with the stimuli-responsiveness of the polymer, enabling the collapse of the copolymer brushes through direct heating or photothermal conversion of PPy under near-IR light. In conclusion, this innovative system offers potential capture-release functionality, providing versatility for diverse applications and enhancing adaptability across different functional scenarios.

Copolymers↗

TITANIUM DIOXIDE TRIADS FOR IMPROVED CHARGE-SEPARATION USING CONDUCTIVE POLYMERS

Dye-sensitized solar cells are potentially one of the best solutions to solar energy conversion because of the low cost of required materials and production processes. Titanium dioxide (TiO2) nanoparticulate fi lms are the basis for one of these types of cells, providing large surface area for dye-sensitizer adsorption. Because TiO2 nanoparticulate fi lms develop defects caused by oxygen defi ciency, deep reactive electron traps are formed. With the addition of an enediol ligand, these electron traps are deliberately removed, enhancing the conduction of electrons within the fi lm. In this project, TiO2 nanoparticulate fi lms made by a layer-by-layer dip coating method were modifi ed with 3,4-dihydroxyphenylacetic acid (DOPAC). DOPAC binds to the titanium atoms on the surface of the nanoparticles, restoring their octahedral geometry. This restructuring of the surface shifts the spectral properties of the TiO2 to the visible spectrum and improves the separation of charges which is observed using photoelectrochemistry. Furthermore, DOPAC enables the electronic attachment of other molecules to the surface of TiO2 fi lms, such as the conductive polymer polyaniline base. This conductive polymer provides an extended separation of charges which increases photocurrent production by forming a triad with the TiO2 semiconductor through the 3,4-dihydroxyphenylacetic acid linker. The photocurrent increases due to the donor properties of the conductive polymer thereby decreasing charge pair recombination.

Cochran, T M↗

Polymer-loaded propagating modes on a one-dimensional photonic crystal

We numerically and experimentally demonstrate that a polymer film-coated one-dimensional photonic crystal (1DPC) can sustain transverse electric (TE) polarized modes without the limit of guided layer's thickness. Our results indicate that two propagating modes are existing inside the polymer film, the first one is the TE polarized Bloch surface wave, and the second one is the TE polarized guided mode. Here in, the evolution of these two modes with change in the polymer film thickness is presented. Our numerical simulation results are in well-agreement with the experimental data obtained using back focal plane imaging.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗