Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Scale up”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Characterization of Ice Roughness Variations in Scaled Glaze Icing Conditions

Because of the significant influence of surface tension in governing the stability and breakdown of the liquid film in flooded stagnation regions of airfoils exposed to glaze icing conditions, the Weber number is expected to be a significant parameter governing the formation and evolution of ice roughness. To investigate the influence of the Weber number on roughness formation, 53.3-cm (21-in.) and 182.9-cm (72-in.) NACA 0012 airfoils were exposed to flow conditions with essentially the same Weber number and varying stagnation collection efficiency to illuminate similarities of the ice roughness created on the different airfoils. The airfoils were exposed to icing conditions in the Icing Research Tunnel (IRT) at the NASA Glenn Research Center. Following exposure to the icing event, the airfoils were then scanned using a ROMER Absolute Arm scanning system. The resulting point clouds were then analyzed using the self-organizing map approach of McClain and Kreeger (2013) to determine the spatial roughness variations along the surfaces of the iced airfoils. The roughness characteristics on each airfoil were then compared using the relative geometries of the airfoil. The results indicate that features of the ice shape and roughness such as glaze-ice plateau limits and maximum airfoil roughness were captured well by Weber number and collection efficiency scaling of glaze icing conditions. However, secondary ice roughness features relating the instability and waviness of the liquid film on the glaze-ice plateau surface are scaled based on physics that were not captured by the local collection efficiency variations.

Roughness Formation↗
NASA NTRS2017

Low-Reynolds Number Aerodynamics of an 8.9 Percent Scale Semispan Swept Wing for Assessment of Icing Effects

Aerodynamic assessment of icing effects on swept wings is an important component of a larger effort to improve three-dimensional icing simulation capabilities. An understanding of ice-shape geometric fidelity and Reynolds and Mach number effects on the iced-wing aerodynamics is needed to guide the development and validation of ice-accretion simulation tools. To this end, wind-tunnel testing and computational flow simulations were carried out for an 8.9%-scale semispan wing based upon the Common Research Model airplane configuration. The wind-tunnel testing was conducted at the Wichita State University 7 ft x 10 ft Beech wind tunnel from Reynolds numbers of 0.8×10(exp 6) to 2.4×10(exp 6) and corresponding Mach numbers of 0.09 to 0.27. This paper presents the results of initial studies investigating the model mounting configuration, clean-wing aerodynamics and effects of artificial ice roughness. Four different model mounting configurations were considered and a circular splitter plate combined with a streamlined shroud was selected as the baseline geometry for the remainder of the experiments and computational simulations. A detailed study of the clean-wing aerodynamics and stall characteristics was made. In all cases, the flow over the outboard sections of the wing separated as the wing stalled with the inboard sections near the root maintaining attached flow. Computational flow simulations were carried out with the ONERA elsA software that solves the compressible, three-dimensional RANS equations. The computations were carried out in either fully turbulent mode or with natural transition. Better agreement between the experimental and computational results was obtained when considering computations with free transition compared to turbulent solutions. These results indicate that experimental evolution of the clean wing performance coefficients were due to the effect of three-dimensional transition location and that this must be taken into account for future data analysis. This research also confirmed that artificial ice roughness created with rapid-prototype manufacturing methods can generate aerodynamic performance effects comparable to grit roughness of equivalent size when proper care is exercised in design and installation. The conclusions of this combined experimental and computational study contributed directly to the successful implementation of follow-on test campaigns with numerous artificial ice-shape configurations for this 8.9% scale model.

Aerodynamics↗
NASA NTRS2017

Preliminary Evaluation of Altitude Scaling for Turbofan Engine Ice Crystal Icing

Preliminary evaluation of altitude scaling for turbofan engine ice crystal icing simulation was conducted during the 2015 LF11 engine icing test campaign in PSL.The results showed that a simplified approach for altitude scaling to simulate the key reference engine ice growth feature and associated icing effects to the engine is possible. But special considerations are needed to address the facility operation limitation for lower altitude engine icing simulation.

altitude scaling↗
NASA NTRS2017

Low-Reynolds Number Aerodynamics of an 8.9 Percent Scale Semispan Swept Wing for Assessment of Icing Effects

Aerodynamic assessment of icing effects on swept wings is an important component of a larger effort to improve three-dimensional icing simulation capabilities. An understanding of ice-shape geometric fidelity and Reynolds and Mach number effects on the iced-wing aerodynamics is needed to guide the development and validation of ice-accretion simulation tools. To this end, wind-tunnel testing and computational flow simulations were carried out for an 8.9 percent-scale semispan wing based upon the Common Research Model airplane configuration. The wind-tunnel testing was conducted at the Wichita State University 7 by 10 ft Beech wind tunnel from Reynolds numbers of 0.8×10(exp 6) to 2.4×10(exp 6) and corresponding Mach numbers of 0.09 to 0.27. This paper presents the results of initial studies investigating the model mounting configuration, clean-wing aerodynamics and effects of artificial ice roughness. Four different model mounting configurations were considered and a circular splitter plate combined with a streamlined shroud was selected as the baseline geometry for the remainder of the experiments and computational simulations. A detailed study of the clean-wing aerodynamics and stall characteristics was made. In all cases, the flow over the outboard sections of the wing separated as the wing stalled with the inboard sections near the root maintaining attached flow. Computational flow simulations were carried out with the ONERA elsA software that solves the compressible, threedimensional RANS equations. The computations were carried out in either fully turbulent mode or with natural transition. Better agreement between the experimental and computational results was obtained when considering computations with free transition compared to turbulent solutions. These results indicate that experimental evolution of the clean wing performance coefficients were due to the effect of three-dimensional transition location and that this must be taken into account for future data analysis. This research also confirmed that artificial ice roughness created with rapid-prototype manufacturing methods can generate aerodynamic performance effects comparable to grit roughness of equivalent size when proper care is exercised in design and installation. The conclusions of this combined experimental and computational study contributed directly to the successful implementation of follow-on test campaigns with numerous artificial ice-shape configurations for this 8.9 percent scale model.

Aerodynamics↗
NASA NTRS2017

Preliminary Evaluation of Altitude Scaling for Turbofan Engine Ice Crystal Icing

Preliminary evaluation of altitude scaling for turbofan engine ice crystal icing simulation was conducted during the 2015 LF11 engine icing test campaign in PSL.The results showed that a simplified approach for altitude scaling to simulate the key reference engine ice growth feature and associated icing effects to the engine is possible. But special considerations are needed to address the facility operation limitation for lower altitude engine icing simulation.

engine ice crystal icing↗
NASA NTRS2018

Icing Simulation Research Supporting the Ice-Accretion Testing of Large-Scale Swept-Wing Models

The work summarized in this report is a continuation of NASA's Large-Scale, Swept-Wing Test Articles Fabrication; Research and Test Support for NASA IRT contract (NNC10BA05 -NNC14TA36T) performed by Boeing under the NASA Research and Technology for Aerospace Propulsion Systems (RTAPS) contract. In the study conducted under RTAPS, a series of icing tests in the Icing Research Tunnel (IRT) have been conducted to characterize ice formations on large-scale swept wings representative of modern commercial transport airplanes. The outcome of that campaign was a large database of ice-accretion geometries that can be used for subsequent aerodynamic evaluation in other experimental facilities and for validation of ice-accretion prediction codes.

Aerodynamics↗
NASA NTRS2018

Scale-Resolving Simulations of Low-Pressure Turbine Cascades with Wall Roughness Using A Spectral-Element Method

The accurate prediction of wall-roughness effects in turbomachinery is becoming critical as turbine designers address airfoil surface quality and degradation concerns arising from the shift to advanced ceramic matrix composite (CMC) or additively-manufactured airfoils operating in higher temperature environments. In this paper, a recently developed computational capability for accurate and efficient scale-resolving simulations of turbomachinery is extended to analyze the boundary- layer separation and transition characteristics in a rough-wall low-pressure turbine (LPT) cascade. The computational capability is based on an entropy-stable discontinuous-Galerkin spectral-element approach that extends to arbitrarily high orders of spatial and temporal accuracy, and is implemented in an efficient manner for a modern high performance computer architecture. Results from the scale-resolving simulations of both smooth and rough airfoil cascades are presented and compared to previous experiments and numerical simulations. The results show that the suction surface boundary layer undergoes laminar separation, transition, and turbulent reattachment for the smooth airfoil cascade, while in the presence of roughness the separation and transition behavior of the suction surface boundary layer is substantially modified. The differences between the smooth and rough airfoil cascades are then highlighted by a detailed analysis of their respective turbulent flow fields.

Spectral-Element↗
NASA NTRS2018

Overview of Large-scale Tropospheric Transport in the Chemistry Climate Model Initiative (CCMI) Simulations

The transport of chemicals is a major uncertainty in the modeling of tropospheric composition. Here we compare the large-scale tropospheric transport properties among different models in the Chemistry Climate Modeling Initiative (CCMI) with a focus on transport defined with respect to the Northern Hemisphere (NH) midlatitude surface. Among simulations of the recent past (1980-2010) we show that there are substantial differences in their global-scale tropospheric transport properties. For example, the mean transit time since southern hemisphere air last contacted the NH midlatitude surface differs by ~30-40% among simulations. We show that these differences are most likely associated with differences in parameterized convection over the oceans, such that the spread in transport among simulations constrained with analysis fields is as large as the spread among free-running simulations.

large-scale tropospheric transport↗
NASA NTRS2019

Aeroelastic Stability Analysis of a Full-Scale Isolated Proprotor on the Tiltrotor Test Rig

A full-scale isolated proprotor test was recently conducted in the USAF National Full-Scale Aerodynamics Complex (NFAC) 40- by 80-Foot Wind Tunnel at NASA Ames. The test article was a 3-bladed research rotor derived from the right-hand rotor of the AW609. For this test, the NASA Tiltrotor Test Rig (TTR) and rotor were installed in the 40- by 80-Foot Wind Tunnel. This paper covers the analyses and testing done to prepare for a safe entry. Included are brief descriptions of the following: NASTRAN models of the TTR, ground vibration tests of the TTR (and resulting modal data), loads analyses, and stability predictions using the comprehensive analysis CAMRAD II. The evolution of these analyses from early in the TTR program until the initiation of actual testing is also discussed. The intent is to show how all of these efforts were integrated to ensure a successful test. This paper includes stability predictions based on NASTRAN modal data and worst-case damping test data. The stability predictions covered all test conditions: hover, cruise (airplane mode), conversion, and helicopter mode. The predictions showed that the TTR and rotor are stable within the test envelope.

Full-Scale Isolated Proprotor↗
NASA NTRS2020

GISS Model E2.2: A Climate Model Optimized for the Middle Atmosphere. Part 2: Validation of Large-Scale Transport and Evaluation of Climate Response

Here we examine the large‐scale transport characteristics of the new ``Middle Atmosphere" NASA Goddard Institute for Space Studies climate model (E2.2). First we evaluate the stratospheric transport circulation in historical atmosphere‐only simulations integrated with interactive trace gas and aerosol chemistry. Compared to lower vertical resolution model versions, E2.2 exhibits improved tropical ascent and older stratospheric mean ages that are more consistent with observed values. In the troposphere, poleward transport to the Arctic and interhemispheric mean ages in E2.2 are comparable to models participating in the Chemistry Climate Modeling Initiative. In addition to validating E2.2 we also assess its ``transport sensitivity" using the coupled atmosphere‐ocean abrupt 4xCO2 and transient 1%CO2 simulations submitted to the Coupled Model Intercomparison Project, Phase 6, along with a 2xCO2 simulation used to evaluate the linearity of the transport circulation's response to increased CO2. We show that decreases (increases) in a stratospheric mean age (idealized surface loss) tracer scale linearly with increased lower stratospheric upwelling, which also increases linearly with warming tropical sea surface temperatures (SSTs). Abrupt 2xCO2 and 4xCO2 experiments constrained with (fixed) pre‐industrial SSTs are also used to quantify the relative importance of rapid adjustments versus SST feedbacks to the transport circulation responses in the model. Finally, sensitivity experiments are presented to illustrate the impact of changes in the convective parameterization on stratospheric transport.

GISS Model E2.2↗
NASA NTRSDate not supplied

Airframe Noise Simulations of a Full-Scale Large Civil Transport in Landing Configuration

This paper summarizes the results obtained from an extensive computational campaign to accurately predict full-scale landing gear noise for large civil transports. A highly accurate digital model of a full-scale Boeing 777-300ER aircraft with as-flown nose and main landing gear components was developed for use in the simulations. Two aircraft configurations were selected: nose and main landing gear deployed with wing high-lift devices retracted, and nose and main landing gear deployed with wing high-lift devices deflected. The two configurations were simulated without and with toboggan fairings installed on the main gear to represent the principal configurations evaluated during the 2005 QTD2 flight test. All simulations were performed with the lattice Boltzmann solver PowerFLOW® to resolve and capture the highly complex, unsteady flow field in the immediate vicinity of the aircraft. The far-field noise sig-nature of the aircraft was computed via a Ffowcs-Williams and Hawkings integral approach, with flow quantities on a permeable surface enclosing the source regions used as input. Synthetic pressure records at ground array microphone locations used during the QDT2 test were employed to generate narrowband acoustic maps and integrated far-field noise spectra. With high-lift devices retracted, the predicted spectra showed that landing gear noise is equivalent to total airframe noise, with no other airframe sources appearing within 10 dB of gear peak levels. Application of a toboggan fairing to the main gear produced modest noise reductions of 1-2 dB across the resolved frequency range. With high-lift devices deflected, undercarriage noise was within 3-4 dB of the total airframe noise, thus comprising nearly half of the total airframe noise. For this configuration, the toboggan fairing did not produce a reduction in noise, corroborating trends previously observed in QTD2 flight test data.

airframe noise↗
NASA NTRS2022

Turbulent Heat Flux, Downward Longwave Radiation and Large-Scale Atmospheric Circulation Associated with the Wintertime Barents-Kara Sea Extreme Sea Ice Loss Events

We investigate wintertime extreme sea ice loss events on synoptic to subseasonal time scales over the Barents-Kara Sea, where the largest sea ice variability is located. Consistent with previous studies, extreme sea ice loss events are associated with moisture intrusions over the Barents-Kara Sea, which are driven by the large-scale atmospheric circulation. In addition to the role of downward longwave radiation associated with moisture intrusions, which is emphasized by previous studies, our analysis shows strong turbulent heat fluxes are associated with extreme sea ice melting events, with both turbulent sensible and latent heat fluxes contributing, though turbulent sensible heat fluxes dominate. Our analysis also shows that these events are connected to tropical convective anomalies. A dipole pattern of convective anomalies with enhanced convection over the Maritime Continent and suppressed convection over the central to eastern Pacific is consistently detected about 6 to 10 days prior to extreme sea ice loss events. This pattern is associated with either the Madden-Julian Oscillation (MJO) or El Niño–Southern Oscillation (ENSO). Composites show that extreme sea ice loss events are connected to tropical convection via Rossby wave propagation in the midlatitudes. However, tropical convective anomalies alone are not sufficient to trigger extreme sea ice loss events, suggesting that extratropical variability likely modulates the connection between tropical convection and extreme sea ice loss events.

Turbulent heat flux↗
NASA NTRS2022

Simulation and Scaling of the Turbulent Vertical Heat Transport and Deep-Cycle Turbulence Across the Equatorial Pacific Cold Tongue

Microstructure observations in the Pacific cold tongue reveal that strong turbulence often penetrates into the thermocline producing hundreds of W/m2 of downward heat transport during nighttime and early morning. However, virtually all observations of this deep-cycle turbulence (DCT) are from 0◦N,140◦W. Here, a hierarchy of ocean process simulations including submesoscale-permitting regional models and turbulence-permitting large eddy simulations (LES) embedded in a regional model provide insight into DCT at and beyond 0◦N,140◦W. A regional hindcast quantifies the spatio-temporal variability of subsurface turbulent heat fluxes throughout the cold tongue from 1999-2016. Climatologically, the mean heat flux is strongest (∼100W/m2) within2◦ of the equator. The heat flux is slightly (∼10 W/m2) stronger in the northern than southern hemisphere throughout the cold tongue. The seasonal cycle of the heat flux, which is not everywhere aligned with the surface flux, ranges from 150 W/m2 near the equator to 30 W/m2 and 10 W/m2 at 4◦N and S respectively. Aseasonal variability of turbulent heat fluxes is logarithmically distributed and temporally uncorrelated with surface heat fluxes. The aseasonal variability of turbulence is highlighted in 34-day LES of Boreal autumn at 0◦N and 3◦N,140◦W. Intense DCT occurs frequently above the undercurrent at 0◦N and intermittently at 3◦N. Daily-mean heat fluxes scale with the bulk vertical shear and the wind stress, which together explain ∼90% of the daily variance across both LES. Observational validation of the scaling at 0◦N,140◦W is encouraging, but observations beyond 0◦N,140◦W can facilitate needed refinement of mixing parameterization in ocean models.

Simulation↗
NASA NTRSDate not supplied

Challenges and Considerations When Using Hydraulic Modal Shaking in Large-Scale Modal Testing

As test articles become dimensionally larger, more complex, and massive in weight, combined with the need to excite them to higher than traditional levels in order to identify their nonlinear characteristics, modal shakers that can generate significantly higher force levels, have longer stroke lengths, and possess higher velocity limits are required. While large scale modal tests may be performed with electrodynamic modal shakers, hydraulic modal shakers become attractive since they can generate higher force levels at lower unit cost with a smaller spatial footprint. While test engineers familiar with electrodynamic modal shakers are familiar with the challenges of displacement and velocity limits and the relatively mild shaker nonlinear distortion due to amplifier gains and shaker flexure structural geometric nonlinearities, they probably are not as familiar with the unique set of challenges hydraulic modal shakers present. These unique challenges include significant nonlinear distortion in the shaker force, issues with the setup of the hydraulic power supply and the associated hydraulic hosing, velocity limits as they relate to potentially damaging the hydraulic actuator piston, and safety issues with operating high-pressure hydraulic systems. This paper addresses these unique challenges to help the test engineer to better utilize hydraulic modal shakers on large-scale modal tests.

Distortion↗
NASA NTRSDate not supplied

Challenges and Considerations When Using Hydraulic Modal Shaking in Large-Scale Modal Testing IMAC-XL

As test articles become dimensionally larger, more complex, and massive in weight, combined with the need to excite them to higher than traditional levels in order to identify their nonlinear characteristics, modal shakers that can generate significantly higher force levels, have longer stroke lengths, and possess higher velocity limits are required. While large scale modal tests may be performed with electrodynamic modal shakers, hydraulic modal shakers become attractive since they can generate higher force levels at lower unit cost with a smaller spatial footprint. While test engineers familiar with electrodynamic modal shakers are familiar with the challenges of displacement and velocity limits and the relatively mild shaker nonlinear distortion due to amplifier gains and shaker flexure structural geometric nonlinearities, they probably are not as familiar with the unique set of challenges hydraulic modal shakers present. These unique challenges include significant nonlinear distortion in the shaker force, issues with the setup of the hydraulic power supply and the associated hydraulic hosing, velocity limits as they relate to potentially damaging the hydraulic actuator piston, and safety issues with operating high-pressure hydraulic systems. This paper addresses these unique challenges to help the test engineer to better utilize hydraulic modal shakers on large-scale modal tests.

Distortion↗
NASA NTRS2022

A New Organization Metric for Synoptic Scale Tropical Convective Aggregation

Organization metrics were originally developed to measure how densely convective clouds are arranged at mesoscales. In this work, we apply organization metrics to describe tropical synoptic scale convective activity. Such activity is identified by cloud-precipitation (hybrid) regimes defined at 1-degree and 1-hourly resolution. Existing metrics were found to perform inadequately for such convective regime aggregates because the large domain size and co-existence of sparse aggregate occurrences with noisy isolated convection often violate assumptions inherent in these metrics. In order to capture these characteristics, in this study the existing “convective organization potential” (COP) metric was modified so as to focus on local organization and provide increased weight to aggregate size. The resulting “area-based COP” (ABCOP) follows the principle that the more numerous the objects, the higher the chance of organization. It is thus optimized to capture large-scale convective events occurring during phenomena such as ENSO and MJO, while also performs as well as existing metrics for small domain sizes.

Synoptic scales↗
NASA NTRS1967

Experimental scaling study of fluid amplifier elements

Study examines scaling parameters of three fluid amplifier elements - a bistable device, a boundary layer control device, and a vortex device. Variations in performance due to size, fluid, and other conditions are studied. Even with restricted examples the large number of variables impedes the establishment of these scaling laws.

Abler, J.↗