Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SHEAR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Compressible homogeneous shear - Simulation and modeling

Compressibility effects were studied on turbulence by direct numerical simulation of homogeneous shear flow. A primary observation is that the growth of the turbulent kinetic energy decreases with increasing turbulent Mach number. The sinks provided by compressible dissipation and the pressure dilatation, along with reduced Reynolds shear stress, are shown to contribute to the reduced growth of kinetic energy. Models are proposed for these dilatational terms and verified by direct comparison with the simulations. The differences between the incompressible and compressible fields are brought out by the examination of spectra, statistical moments, and structure of the rate of strain tensor.

Sarkar, S.↗
NASA NTRS1992

Formation of solar prominences by photospheric shearing motions

The formation of the normal polarity solar prominences in a magnetic arcade by photospheric shearing motions was studied using a two-and-a-half-dimensional MHD code, which includes the gravity, radiative cooling, simplified coronal heating, and thermal conduction along the field lines. It was found that a footpoint shear induces an expansion of the magnetic arcade and cooling of the plasma in it; simultaneously, the denser material from the lower part of the arcade is pulled up by the expanding field lines. Thus, a local enhancement of radiative cooling is effected, leading to the onset of thermal instability and the condensation of coronal plasma. The condensed material grows vertically to form a sheetlike structure leading eventually to the formation of prominence.

Choe, G. S.↗
NASA NTRS1992

Development of turbulence models for shear flows by a double expansion technique

Turbulence models are developed by supplementing the renormalization group (RNG) approach of Yakhot and Orszag with scale expansions for the Reynolds stress and production of dissipation terms. The additional expansion parameter (eta) is the ratio of the turbulent to mean strain time scale. While low-order expansions appear to provide an adequate description of the Reynolds stress, no finite truncation of the expansion for the production of dissipation term in powers of eta suffices - terms of all orders must be retained. Based on these ideas, a new two-equation model and Reynolds stress transport model are developed for turbulent shear flows. The models are tested for homogeneous shear flow and flow over a backward facing step. Comparisons between the model predictions and experimental data are excellent.

Yakhot, V.↗
NASA NTRS1992

Modified k-epsilon model for compressible free shear flows

The k-epsilon model has heretofore been unable to predict experimentally observed decreases in the spreading rate of turbulent supersonic free-shear layers encountered with increasing Mach number. The present modification of the two-equation k-epsilon-1 model is able to effectively reduce the model to a 1-equation k model in highly compressible flows; as a result, a significant improvement in accuracy is obtained for predictions concerning supersonic shear layers.

Brescianini, C. P.↗
NASA NTRS1987

Planar compressible reacting shear layer

Information on the planar compressible reacting shear layer is given in viewgraph form. topics covered include heat transfer in 3D flow regions, chemical reacting flows, an unsteady 2D compressible reacting code (MRVC2D), a plane mixing layer, and critical needs in shear layer physics.

Marek, C. J.↗
NASA NTRS1992

Double-Lap Shear Test For Honeycomb Core

Double-lap test measures shear strength of panel made of honeycomb core with 8-ply carbon-fiber/epoxy face sheets. Developed to overcome three principal disadvantages of prior standard single-lap shear test: specimen had to be more than 17 in. long; metal face sheets had to be used; and test introduced torque, with consequent bending and peeling of face sheets and spurious tensile or compressive loading of honeycomb.

Nettles, Alan T.↗
NASA NTRS1992

The Orlando TDWR testbed and airborne wind shear date comparison results

The focus of this talk is on comparing terminal Doppler Weather Radar (TDWR) and airborne wind shear data in computing a microburst hazard index called the F factor. The TDWR is a ground-based system for detecting wind shear hazards to aviation in the terminal area. The Federal Aviation Administration will begin deploying TDWR units near 45 airports in late 1992. As part of this development effort, M.I.T. Lincoln Laboratory operates under F.A.A. support a TDWR testbed radar in Orlando, FL. During the past two years, a series of flight tests has been conducted with instrumented aircraft penetrating microburst events while under testbed radar surveillance. These tests were carried out with a Cessna Citation 2 aircraft operated by the University of North Dakota (UND) Center for Aerospace Sciences in 1990, and a Boeing 737 operated by NASA Langley Research Center in 1991. A large data base of approximately 60 instrumented microburst penetrations has been obtained from these flights.

Campbell, Steven↗
NASA NTRS1992

NASA experimental airborne doppler radar and real time processor for wind shear detection

The topics are presented in viewgraph form and include the following: experimental radar system capabilities; an experimental radar system block diagram; wind shear radar signal and data processor (WRSDP); WRSDP hardware architecture; WRSDP system design goals; DSP software development tools; OS-9 software development tools; WRSDP digital signal processing; WRSDP display operational modes; WRSDP division of functions; structure of WRSDP signal and data processing algorithms; and the wind shear radar flight experiment.

Schaffner, Philip H.↗
NASA NTRS1993

Influence of transverse-shear and large-deformation effects on the low-speed impact response of laminated composite plates

An analytical procedure is presented for determining the transient response of simply supported, rectangular laminated composite plates subjected to impact loads from airgun-propelled or dropped-weight impactors. A first-order shear-deformation theory is included in the analysis to represent properly any local short-wave-length transient bending response. The impact force is modeled as a locally distributed load with a cosine-cosine distribution. A double Fourier series expansion and the Timoshenko small-increment method are used to determine the contact force, out-of-plane deflections, and in-plane strains and stresses at any plate location due to an impact force at any plate location. The results of experimental and analytical studies are compared for quasi-isotropic laminates. The results indicate that using the appropriate local force distribution for the locally loaded area and including transverse-shear-deformation effects in the laminated plate response analysis are important. The applicability of the present analytical procedure based on small deformation theory is investigated by comparing analytical and experimental results for combinations of quasi-isotropic laminate thicknesses and impact energy levels. The results of this study indicate that large-deformation effects influence the response of both 24- and 32-ply laminated plates, and that a geometrically nonlinear analysis is required for predicting the response accurately.

Ambur, Damodar R.↗
NASA NTRS1991

Structural response of bead-stiffened thermoplastic shear webs

The results of an experimental and analytical study of the structural response and failure characteristics of selected bead-stiffened thermoplastic shear-webs are presented. Results are given for specimens with one stiffeneer, with two stiffeners, and different stiffener geometries. Selected analytical results that were obtained with the Computational Structural Mechanics (CSM) Testbed computer code are presented. Analytical results that describe normal and transverse shear stress are also presented.

Rouse, Marshall↗
NASA NTRS1992

Velocity shear generation of solar wind turbulence

A two-dimensional incompressible MHD spectral code is used to show that shear-driven turbulence is a possible means for producing many observed properties of the evolution of the magnetic and velocity fluctuations in the solar wind and, in particular, the evolution of the cross helicity ('Alfvenicity') at small scales. It is shown that large-scale shear can nonlinearly produce a cascade to smaller scale fluctuations even when the linear Kelvin-Helmholtz mode is stable, and that a roughly power law inertial range is established by this process. The evolution found is similar to that seen in some other simulations of MHD turbulence.

Roberts, D. A.↗
NASA NTRS1993

Shear-induced surface alignment of polymer dispersed liquid crystal microdroplets on the boundary layer

Polymer dispersed liquid crystal thin films have been deposited on a glass substrate, utilizing the processes of polymerization and solvent evaporation induced phase separation. Liquid crystal microdroplets trapped on the upper surface of the thin film respond to the shear stress due to air or gas flow on the surface layer. Response to an applied step shear stress input on the surface layer has been measured by measuring the time response of the transmitted light intensity. Initial results on the measurements of the light transmission as a function of the air flow differential pressure indicate that these systems offer features suitable for boundary layer and gas flow sensors.

Parmar, D. S.↗
NASA NTRS1992

Ion acceleration and coherent structures generated by lower hybrid shear-driven instabilities

It is shown that if k = omega(S)/omega(LH) greater than 1 (omega(S) and omega(LH) are the shear and lower hybrid frequencies), a sheared electron cross-field flow excites the electron-ion-hybrid mode, causing significant perpendicular ion acceleration. The electric potential develops coherent structures (vortexlike) longer than the electron Larmor radius, rho(e). For k less than 1, a smooth transition occurs where the wavelength becomes of the order of rho(e), the lower hybrid drift instability dominates, and the formation of vortexlike structures is no longer observed. The results are relevant to laboratory, laser-produced, and space plasmas.

Romero, H.↗
NASA NTRS1993

Shock turbulence interaction in the presence of mean shear - An application of rapid distortion theory

The present examination of the response of anisotropic turbulent flows to a shock wave uses incompressible, homogeneous rapid distortion theory and idealizes the shock-wave as 1D compression. Attention is given to the shock's effect on axisymmetric flow and both the normal and oblique cases for shear flow. The oblique angle between the directions of compression and shear significantly affects turbulence evolution. Compression amplifies all components of turbulence intensity.

Mahesh, Krishnan↗
NASA NTRS1993

Stochastic forcing of perturbation variance in unbounded shear and deformation flows

An alternative mechanism for growth and maintenance of perturbation variance - amplification in a straining flow of stochastically forced perturbations in the absence of exponential instabilities - is explored, using as examples unbounded constant shear and pure deformation flow for which closed-form solutions are available and neither of which support a nonsingular mode. With diffusive dissipation, amplification of isotropic band-limited stochastic driving is found to be unbounded for the case of pure deformation and to be bounded by a threefold increase at large shear for the case of a linear velocity profile. It is concluded that amplification of stochastic forcing in a straining field can maintain a variance field substantially more energetic than that resulting from the same forcing in the absence of a background straining flow.

Farrell, Brian F.↗
NASA NTRS1992

Mixing and chemical reaction in sheared and nonsheared homogeneous turbulence

Direct numerical simulations were made to examine the local structure of the reaction zone for a moderately fast reaction between unmixed species in decaying, homogeneous turbulence and in a homogeneous turbulent shear flow. Pseudospectral techniques were used in domains of 64 exp 3 and higher wavenumbers. A finite-rate, single step reaction between non-premixed reactants was considered, and in one case temperature-dependent Arrhenius kinetics was assumed. Locally intense reaction rates that tend to persist throughout the simulations occur in locations where the reactant concentration gradients are large and are amplified by the local rate of strain. The reaction zones are more organized in the case of a uniform mean shear than in isotropic turbulence, and regions of intense reaction rate appear to be associated with vortex structures such as horseshoe vortices and fingers seen in mixing layers. Concentration gradients tend to align with the direction of the most compressive principal strain rate, more so in the isotropic case.

Leonard, Andy D.↗
NASA NTRS1993

Post-buckling of geometrically imperfect shear-deformable flat panels under combined thermal and compressive edge loadings

The static post-buckling of simply-supported flat panels exposed to a stationary nonuniform temperature field and subjected to a system of subcritical in-plane compressive edge loads is investigated. The study is performed within a refined theory of composite laminated plates incorporating the effect of transverse shear and the geometric nonlinearities. The influence played by a number of effects, among them transverse shear deformation, initial geometric imperfections, the character of the in-plane boundary conditions and thickness ratio are studied and a series of conclusions are outlined. The influence played by the complete temperature field (i.e., the uniform through thickness and thickness-wise gradient) as compared to the one induced by only the uniform one, is discussed and the peculiarities of the resulting post-buckling behaviors are enlightened.

Librescu, L.↗
NASA NTRS1993

Control of a supersonic reattaching shear layer

A reattaching supersonic shear layer was perturbed by transverse air injection, and the effects were investigated using flow visualization. It was found that shear layer mixing was increased and that the shock system was strongly disturbed due to the heightened three dimensionality of the flow. Mixing enhancement was also achieved in an incompressible downstream-facing step flow using the same blowing procedure.

Poggie, J.↗