Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SHAPE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Tri-axial Shape Coexistence and a New Aligned Band in {sup 178}Os

The Os nuclei lie in the beginning of the transitional region between the well deformed rare earth and spherical lead isotopes. The nuclei in this region are believed to be soft to changes in gamma deformation due to the softness of nuclear potential which may result in the shape coexistence. The neutron Fermi levels in Os nuclei from A = 170 to A = 186 lie in the middle of i{sub 13/2} orbital so that their shape in the ground state tends to take an appreciable prolate deformation. Hence collective bands with the well defined moment of inertia occur and the effect of different proton orbitals is observed as a modulation of the prolate structure. The anomalies in the yrast sequence, an effect attributed to change in moment of inertia of the ground state rotational band and the band crossing phenomena, are very important and vary strongly with neutron number in case of Os nuclei. The nuclear structure of {sup 178}Os nucleus has been studied using the reaction {sup 165}Ho({sup 20}Ne, p6n){sup 178}Os. Indian National Gamma Array (INGA) consisting of six Clover detectors with anti Compton shields was used for the detection of resulting gamma rays. The Direction Correlation of {gamma}-rays de-exciting Oriented states (DCO) ratio and polarization of gamma rays were measured to assign spin, parity and multipolarity of transitions. Twenty one new transitions belonging to the {sup 178}Os nucleus have been identified. The sudden and rather strong gain in aligned angular momentum is observed in the yrast band of {sup 178}Os. A new aligned rotational band similar to {sup 180}Os is also discovered in this nucleus. This band exhibits a very complex decay pattern with a single linking transition of 1778 keV to the ground state band. The tri-axial shape co-existence is also observed in this nucleus at higher excitation. The experimental results are compared with the Microscopic Hartree-Fock model calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Shape phase transitions and critical points

We investigate different aspects connected with shape phase transitions in nuclei and the possible occurrence of dynamical symmetries at the critical points. We discuss in particular the behaviour of the neighbour odd nuclei at the vicinity of the critical points in the even nuclei. We consider both the case of the transition from the vibrational behaviour to the gamma-unstable deformation (characterized within the collective Bohr hamiltonian by the E(5) critical point symmetry) and the case of the transition from the vibrational behaviour to the stable axial deformation (characterized by the X(5) symmetry). The odd particle is assumed to be moving in the three single particle orbitals j = 1/2,3/2,5/2, a set of orbitals that is known to lead to possible supersymmetric cases. The coupling of the odd particle to the Bohr hamiltonian does lead in fact in the former case at the critical point to the E(5/12) boson-fermion dynamical symmetry. An alternative approach to the two shape transitions is based on the Interacting Boson Fermion Model. In this case suitably parametrized boson-fermion hamiltonians can describe the evolution of the odd system along the shape transitions. At the critical points both energy spectra and electromagnetic transitions were found to display characteristic patterns similar to those displayed by the even nuclei at the corresponding critical point. The behaviour of the odd nuclei can therefore be seen as necessary complementary signatures of the occurrence of the phase transitions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Flow shaping using three-dimensional microscale gas discharge

We introduce a flow shaping mechanism using surface compliant microscale gas discharge. A three-dimensional finite element-based multiscale ionized gas flow code is utilized to analyze charge separation, potential distribution, and flow inducement mechanism. For the case of quiescent flow, a horseshoe-shaped plasma generator is introduced. Due to its unusual shape, the three-dimensional electric force excites a pinching effect on the fluid inside selectively powered electrode arc. Such effect is capable of tripping the flow-ejecting fluid normal to the plane of the actuator and thus can be very useful for many applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimization and analysis of shape of coaxial electrode for microwave plasma in water

The effect of the shape of the electrode to generate 2.45 GHz microwave plasma in pure water is examined. Three variations of a common coaxial electrode are proposed, and compared according to the power required for plasma ignition and the position of plasma ignition in pure water at 6 kPa using a high-speed camera. These coaxial electrodes are calculated using three-dimensional finite-difference time-domain method calculations. The superior shape of coaxial electrode is found to be one with a flat plane on the tip of the inner electrode and dielectric substance located below the tip of the outer electrode. The position of the plasma ignition is related to the shape of the coaxial electrode. By solving the heat-conduction equation of water around the coaxial electrode taking into account the absorption of the microwave energy, the position of the plasma ignition is found to be not where electric field is the largest, but rather where temperature is maximized.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Shape error analysis for reflective nano focusing optics

Focusing performance of reflective x-ray optics is determined by surface figure accuracy. Any surface imperfection present on such optics introduces a phase error in the outgoing wave fields. Therefore converging beam at the focal spot will differ from the desired performance. Effect of these errors on focusing performance can be calculated by wave optical approach considering a coherent wave field illumination of optical elements. We have developed a wave optics simulator using Fresnel-Kirchhoff diffraction integral to calculate the mirror pupil function. Both analytically calculated and measured surface topography data can be taken as an aberration source to outgoing wave fields. Simulations are performed to study the effect of surface height fluctuations on focusing performances over wide frequency range in high, mid and low frequency band. The results using real shape profile measured with long trace profilometer (LTP) suggest that the shape error of {lambda}/4 PV (peak to valley) is tolerable to achieve diffraction limited performance. It is desirable to remove shape error of very low frequency as 0.1 mm{sup -1} which otherwise will generate beam waist or satellite peaks. All other frequencies above this limit will not affect the focused beam profile but only caused a loss in intensity.

43 PARTICLE ACCELERATORS↗

Pulse shape measurements using single shot-frequency resolved optical gating for high energy (80 J) short pulse (600 fs) laser

Relevant to laser based electron/ion accelerations, a single shot second harmonic generation frequency resolved optical gating (FROG) system has been developed to characterize laser pulses (80 J, {approx}600 fs) incident on and transmitted through nanofoil targets, employing relay imaging, spatial filter, and partially coated glass substrates to reduce spatial nonuniformity and B-integral. The device can be completely aligned without using a pulsed laser source. Variations of incident pulse shape were measured from durations of 613 fs (nearly symmetric shape) to 571 fs (asymmetric shape with pre- or postpulse). The FROG measurements are consistent with independent spectral and autocorrelation measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Role of B19' martensite deformation in stabilizing two-way shape memory behavior in NiTi

Deformation of a B19' martensitic, polycrystallineNi49.9Ti50.1 (at. %) shape memoryalloy and its influence on the magnitude and stability of the ensuing two-way shape memory effect (TWSME) was investigated by combined ex situ mechanical experimentation and in situneutron diffraction measurements at stress and temperature. The microstructural changes (texture, lattice strains, and phase fractions) during room-temperature deformation and subsequent thermal cycling were captured and compared to the bulk macroscopic response of the alloy. With increasing uniaxial strain, it was observed that B19' martensite deformed by reorientation and detwinning with preferred selection of the (1¯50) M and (010) M variants, (201¯) B19' deformation twinning, and dislocation activity. These mechanisms were indicated by changes in bulk texture from the neutron diffraction measurements. Partial reversibility of the reoriented variants and deformation twins was also captured upon load removal and thermal cycling, which after isothermal deformation to strains between 6% and 22% resulted in a strong TWSME. Consequently, TWSME functional parameters including TWSME strain, strain reduction, and transformation temperatures were characterized and it was found that prior martensite deformation to 14% strain provided the optimum condition for the TWSME, resulting in a stable two-way shape memory strain of 2.2%. Thus, isothermal deformation of martensite was found to be a quick and efficient method for creating a strong and stable TWSME in Ni₄₉.₉Ti₅₀.₁.

Benafan, O.↗

Adjustment of ablation shapes and subwavelength ripples based on electron dynamics control by designing femtosecond laser pulse trains

A quantum model is proposed to investigate femtosecond laser pulse trains processing of dielectrics by including the plasma model with the consideration of laser particle-wave duality. Central wavelengths (400 nm and 800 nm) strongly impact the surface plasmon field distribution, the coupling field intensity distribution (between the absorbed intensity and the surface plasma), and the distribution of transient localized free electron density in the material. This, in turn, significantly changes the localized transient optical/thermal properties during laser materials processing. The effects of central wavelengths on ablation shapes and subwavelength ripples are discussed. The simulation results show that: (1) ablation shapes and the spacing of subwavelength ripples can be adjusted by localized transient electron dynamics control using femtosecond laser pulse trains; (2) the adjustment of the radii of ablation shapes is stronger than that of the periods of subwavelength ripples.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Criteria of radio-frequency ring-shaped hollow cathode discharge using H{sub 2} and Ar gases for plasma processing

In order to achieve high-density capacitively coupled plasma, a radio-frequency (RF) ring-shaped hollow cathode discharge has been developed as a candidate for processing plasma sources. The plasma density in the hollow cathode discharge reaches a high magnitude of 10{sup 10}-10{sup 11} cm{sup -3}. The RF ring-shaped hollow cathode discharge depends on the pressure and mass of the working gas. Criteria required for producing a RF ring-shaped hollow cathode discharge have been investigated for various gas pressures using H{sub 2} and Ar gases for high-density plasma production. The results reveal that the criteria for the occurrence of the hollow cathode effect are that the trench width should be approximately equal to the sum of the electron-neutral mean free paths and twice the sheath thickness of the RF powered electrode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nanoimprint-lithography patterned epitaxial Fe nanowire arrays with misaligned magnetocrystalline and shape anisotropies

We fabricated large area (>1 × 1 cm 2 ), epitaxial Fe nanowire arrays on MgO(001) substrates by nanoimprint lithography with a direct metallization of epitaxial materials through a metallic mask, which avoided the disadvantageous metal-etching process in conventional methods. The magnetization reversals, as revealed by magneto-optic Kerr effect, showed competing effects between Fe cubic magnetocrystalline anisotropy and lithographically induced uniaxial shape anisotropy. Unlike the weakly induced uniaxial anisotropy observed in continuous films, both the magnitude and direction of the uniaxial shape anisotropy can be easily modulated in the nanowires. Complex magnetization reversal processes including two-step and three-step loops were observed when magnetizing the samples along different Fe cubic easy axes, respectively. Finally, these modified magnetization reversal processes were explained by the nucleation and propagation of the domain walls along the non-superimposed easy axes of the competing magnetocrystalline and shape anisotropies.

Environmental Molecular Sciences Laboratory↗

Improvement of uniformity of the negative ion beams by tent-shaped magnetic field in the JT-60 negative ion source

Non-uniformity of the negative ion beams in the JT-60 negative ion source with the world-largest ion extraction area was improved by modifying the magnetic filter in the source from the plasma grid (PG) filter to a tent-shaped filter. The magnetic design via electron trajectory calculation showed that the tent-shaped filter was expected to suppress the localization of the primary electrons emitted from the filaments and created uniform plasma with positive ions and atoms of the parent particles for the negative ions. By modifying the magnetic filter to the tent-shaped filter, the uniformity defined as the deviation from the averaged beam intensity was reduced from 14% of the PG filter to ∼10% without a reduction of the negative ion production.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of electric field and shape on the ground state energy of an exciton bound to an ionized donor impurity in ellipsoidal quantum dots

The effects of electric field and shape on the ground state energy of an exciton bound to an ionized donor are studied in a weakly prolate (oblate) GaAs ellipsoidal quantum dot within the effective-mass approximation using a variational method in the framework of perturbation theory. Both the heavy-hole and light-hole excitons are considered. The results show that the energy shift not only depends on the electric field but also on the dot shape and size. The influence of the dot shape on the light hole case is more pronounced than that of the heavy hole case, but the influence of the electric field on the heavy hole case is more pronounced.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A first look at Weyl anomalies in shape dynamics

One of the more popular objections towards shape dynamics is the suspicion that anomalies in the spatial Weyl symmetry will arise upon quantization. The purpose of this short paper is to establish the tools required for an investigation of the sort of anomalies that can possibly arise. The first step is to adapt to our setting Barnich and Henneaux's formulation of gauge cohomology in the Hamiltonian setting, which serve to decompose the anomaly into a spatial component and time component. The spatial part of the anomaly, i.e., the anomaly in the symmetry algebra itself ([Ω, Ω] ∝ ℏ instead of vanishing) is given by a projection of the second ghost cohomology of the Hamiltonian BRST differential associated to Ω, modulo spatial derivatives. The temporal part, [Ω, H] ∝ ℏ is given by a different projection of the first ghost cohomology and an extra piece arising from a solution to a functional differential equation. Assuming locality of the gauge cohomology groups involved, this part is always local. Assuming locality for the gauge cohomology groups, using Barnich and Henneaux's results, the classification of Weyl cohomology for higher ghost numbers performed by Boulanger, and following the descent equations, we find a complete characterizations of anomalies in 3+1 dimensions. The spatial part of the anomaly and the first component of the temporal anomaly are always local given these assumptions even in shape dynamics. The part emerging from the solution of the functional differential equations explicitly involves the shape dynamics Hamiltonian, and thus might be non-local. If one restricts this extra piece of the temporal anomaly to be also local, then overall no Weyl anomalies, either temporal or spatial, emerge in the 3+1 case.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Understanding S-shaped current-voltage characteristics of organic solar cells: Direct measurement of potential distributions by scanning Kelvin probe

We present a comparison of the potential distribution along the cross section of bilayer poly(3-hexylthiophene)/1-(3-methoxycarbonyl)propyl-1-phenyl[6,6]C61 (P3HT/PCBM) solar cells, which show normal and anomalous, S-shaped current-voltage (IV) characteristics. We expose the cross sections of the devices with a focussed ion beam and measure them with scanning Kelvin probe microscopy. We find that in the case of S-shaped IV-characteristics, there is a huge potential drop at the PCBM/Al top contact, which does not occur in solar cells with normal IV-characteristics. This behavior confirms the assumption that S-shaped curves are caused by hindered charge transport at interfaces.

36 MATERIALS SCIENCE↗

The analysis of ball's motion in the torus-shaped autoequalizer

The reduction of vibrations in rotary systems is necessary condition for the development of constructions with high quality requirements. Among the devices that are able to reduce rotor's vibrations are automatic balancers with balls, liquid, etc. Autoequalizers with torus-shaped body contain one ball-shaped adjustment mass that can freely roll both in the ring direction and in the cross section. This enables reducing to the minimum the force of resistance at the ball's moving, but simultaneously decreases the chance of launching the autoequalizer in the autobalancing regime. It has been stated that the ball in the working state is influenced by forces that are aimed at moving it in the body of the autoequalizer towards the side opposite to the imbalance. The design of an autoequalizer that ensures working state in which at rotation the ball stops relative to the autoequalizer's body opposite to the imbalance has been experimentally worked out. The autoequalizer is made up of the mathematical model with two differential equations. In the result of the calculations it has been proved that the ball of an equalizer with the torus-shaped body has at least two movement conditions one of which is a working state, and another one is a spare state.

36 MATERIALS SCIENCE↗

Laboratory transferability of optimally shaped laser pulses for quantum control

Optimal control experiments can readily identify effective shaped laser pulses, or “photonic reagents,” that achieve a wide variety of objectives. An important additional practical desire is for photonic reagent prescriptions to produce good, if not optimal, objective yields when transferred to a different system or laboratory. Building on general experience in chemistry, the hope is that transferred photonic reagent prescriptions may remain functional even though all features of a shaped pulse profile at the sample typically cannot be reproduced exactly. As a specific example, we assess the potential for transferring optimal photonic reagents for the objective of optimizing a ratio of photoproduct ions from a family of halomethanes through three related experiments. First, applying the same set of photonic reagents with systematically varying second- and third-order chirp on both laser systems generated similar shapes of the associated control landscape (i.e., relation between the objective yield and the variables describing the photonic reagents). Second, optimal photonic reagents obtained from the first laser system were found to still produce near optimal yields on the second laser system. Third, transferring a collection of photonic reagents optimized on the first laser system to the second laser system reproduced systematic trends in photoproduct yields upon interaction with the homologous chemical family. These three transfers of photonic reagents are demonstrated to be successful upon paying reasonable attention to overall laser system characteristics. The ability to transfer photonic reagents from one laser system to another is analogous to well-established utilitarian operating procedures with traditional chemical reagents. The practical implications of the present results for experimental quantum control are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tomographic analysis of neutron and gamma pulse shape distributions from liquid scintillation detectors at Joint European Torus

The Joint European Torus (JET, Culham, UK) is the largest tokamak in the world devoted to nuclear fusion experiments of magnetic confined Deuterium (D)/Deuterium-Tritium (DT) plasmas. Neutrons produced in these plasmas are measured using various types of neutron detectors and spectrometers. Two of these instruments on JET make use of organic liquid scintillator detectors. The neutron emission profile monitor implements 19 liquid scintillation counters to detect the 2.45 MeV neutron emission from D plasmas. A new compact neutron spectrometer is operational at JET since 2010 to measure the neutron energy spectra from both D and DT plasmas. Liquid scintillation detectors are sensitive to both neutron and gamma radiation but give light responses of different decay time such that pulse shape discrimination techniques can be applied to identify the neutron contribution of interest from the data. The most common technique consists of integrating the radiation pulse shapes within different ranges of their rising and/or trailing edges. In this article, a step forward in this type of analysis is presented. The method applies a tomographic analysis of the 3-dimensional neutron and gamma pulse shape and pulse height distribution data obtained from liquid scintillation detectors such that n/γ discrimination can be improved to lower energies and additional information can be gained on neutron contributions to the gamma events and vice versa.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation on edge fringing effect and oxide thickness dependence of inversion current in metal-oxide-semiconductor tunneling diodes with comb-shaped electrodes

A particular edge-dependent inversion current behavior of metal-oxide-semiconductor (MOS) tunneling diodes was investigated utilizing square and comb-shaped electrodes. The inversion tunneling current exhibits the strong dependence on the tooth size of comb-shaped electrodes and oxide thickness. Detailed illustrations of current conduction mechanism are developed by simulation and experimental measurement results. It is found that the electron diffusion current and Schottky barrier height lowering for hole tunneling current both contribute on inversion current conduction. In MOS tunneling photodiode applications, the photoresponse can be improved by decreasing SiO{sub 2} thickness and using comb-shaped electrodes with smaller tooth spacing. Meantime, the high and steady photosensitivity can also be approached by introducing HfO{sub 2} into dielectric stacks.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗