Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Features of molecular-beam epitaxy and structural properties of AlInSb-based heterostructures

AlInSb layers are grown on highly lattice-mismatched GaAs (100) substrates by molecular-beam epitaxy (MBE) and studied in situ by reflection high-energy electron diffraction and ex situ by scanning and transmission electron microscopy (SEM and TEM). It is shown that one feature of AlInSb/GaAs heterostructure features is a high probability of forming microtwins; methods for decreasing their concentration are proposed. To initiate AlInSb growth on GaAs substrates under high lattice-mismatch ({approx}14.5%) conditions and to stimulate the transition to 2D growth, the GaAs layer surface was preliminarily exposed to an antimony flux followed by deposition of an intermediate AlSb buffer layer. The optimization of initial MBE growth stages of Sb-containing layers on the GaAs surface allows a decrease in the defect density in the GaAs/AlInSb heterostructures more than by two orders of magnitude, including a drastic decrease in the microtwin density. Optimal MBE growth conditions for Al{sub x}Al{sub 1-x}Sb are determined in a wide composition range (0 < x < 0.3). The TEM and SEM studies confirm the high structural quality of grown GaAs/AlInSb heterostructures. Hall-effect measurements showed the dependence of the carrier mobility and concentration on the aluminum content in AlInSb layers and allowed preliminary conclusions on scattering mechanisms.

36 MATERIALS SCIENCE↗

Temperature Dependent Raman Spectroscopic Study of the Fe Doped La{sub 0.67}Sr{sub 0.33}MnO{sub 3} Prepared Using Ball Milling Method

Polycrystalline samples of La{sub 0.67}Sr{sub 0.33}Mn{sub 0.65}Fe{sub 0.35}O{sub 3} (LSMFO) were synthesized using the standard ball mill method with different calcination temperatures ranging from 800 to 1100°C for 7 h. The phase purity of these samples was confirmed using X-ray diffraction (XRD) patterns. All samples were found to have rhombohedral crystal structure with R 3-bar c space group. The lattice parameters, cell volume, bond angle and bond length have been obtained using the Rietveld refinement by FullProf software. The average crystallite size calculated using the Debye-Scherrer formula was found between 27 and 60 nm. Surface morphology of the prepared samples has been examined using a scanning electron microscope (SEM). SEM images show the formation of well-arranged grain sizes distributed from 240 to 400 nm, much larger than one estimated using the Scherrer formula. All tiny particles are highly agglomerated with the increasing temperature and porosity decreases with increasing temperature. An analysis of the frequency and peak broadening of Raman modes as a function of temperature clearly shows the significant temperature effect on the A{sub 1g} and E{sub g} modes of LSMFO. The shifts and broadening of the A{sub 1g} and E{sub g} modes are discussed in light of the oxygen sublattice distortion. Our study shows the reduction in distortion with increasing calcination temperature, which suggests a decrease in the JT effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of the Thicknesses and Visualization of Ion-Exchange Waveguides in Glasses by Scanning Electron Microscopy

The formation of a surface layer with silver and sodium concentration gradients in K8-grade glasses as a result of ion exchange is demonstrated by scanning electron microscopy (SEM) and electron probe X-ray microanalysis. The silver ions enriched layers with different thicknesses, depending on the duration of the ion exchange from the silver melt, are visualized in the secondary electrons mode. SEM data on the thickness of the silver enriched layer are in good agreement with the results of calculation from the diffusion equation for silver in glass. The dependence of the silver concentration on the diffusion depth is obtained using elemental composition mapping over the glass cross section. The presence of a layer with a silver concentration gradient leads to formation of a gradient waveguide. Discrete peaks in silver concentration profiles, caused by specific features of mutual diffusion of sodium and silver ions in glasses, are found.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Conformal Pressure and Fast-Charging Li-Ion Batteries

Batteries capable of extreme fast-charging (XFC) are a necessity for the deployment of electric vehicles. Material properties of electrodes and electrolytes along with cell parameters such as stack pressure and temperature have coupled, synergistic, and sometimes deleterious effects on fast-charging performance. We develop a new experimental testbed that allows precise and conformal application of electrode stack pressure. We focus on cell capacity degradation using single-layer pouch cells with graphite anodes, LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC532) cathodes, and carbonate-based electrolyte. In the tested range (10–125 psi), cells cycled at higher pressure show higher capacity and less capacity fading. Additionally, Li plating decreases with increasing pressure as observed with scanning electron microscopy (SEM) and optical imaging. While the loss of Li inventory from Li plating is the largest contributor to capacity fade, electrochemical and SEM examination of the NMC cathodes after XFC experiments show increased secondary particle damage at lower pressure. We infer that the better performance at higher pressure is due to more homogeneous reactions of active materials across the electrode and less polarization through the electrode thickness. Our study emphasizes the importance of electrode stack pressure in XFC batteries and highlights its subtle role in cell conditions.

25 ENERGY STORAGE↗

Computational Examination of Orientation-Dependent Morphological Evolution during the Electrodeposition and Electrodissolution of Magnesium

Here a new model of electrodeposition and electrodissolution is developed and applied to the evolution of Mg deposits during anode cycling. The model captures Butler-Volmer kinetics, facet evolution, the spatially varying potential in the electrolyte, and the time-dependent electrolyte concentration. The model utilizes a diffuse interface approach, employing the phase field and smoothed boundary methods. Scanning electron microscope (SEM) images of magnesium deposited on a gold substrate show the formation of faceted deposits, often in the form of hexagonal prisms. Orientation-dependent reaction rate coefficients were parameterized using the experimental SEM images. Three-dimensional simulations of the growth of magnesium deposits yield deposit morphologies consistent with the experimental results. The simulations predict that the deposits become narrower and taller as the current density increases due to the depletion of the electrolyte concentration near the sides of the deposits. Increasing the distance between the deposits leads to increased depletion of the electrolyte surrounding the deposit. Two models relating the orientation-dependence of the deposition and dissolution reactions are presented. Finally, the morphology of the Mg deposit after one deposition-dissolution cycle is significantly different between the two orientation-dependence models, providing testable predictions that suggest the underlying physical mechanisms governing morphology evolution during deposition and dissolution.

36 MATERIALS SCIENCE↗

Nano-Scale Hydroxyapatite: Synthesis, Two-Dimensional Transport Experiments, and Application for Uranium Remediation

Synthetic nano-scale hydroxyapatite (NHA) was prepared and characterized using X-ray diffraction (XRD) and scanning electron microscopy (SEM) methods. The XRD data confirmed that the crystalline structure and chemical composition of NHA correspond to Ca 5 OH(PO 4 ) 3 . The SEM data confirmed the size of NHA to be less than 50 nm. A two-dimensional physical model packed with saturated porous media was used to study the transport characteristics of NHA under constant flow conditions. The data show that the transport patterns of NHA were almost identical to tracer transport patterns. This result indicates that the NHA material can move with water like a tracer, and its movement was neither retarded nor influenced by any physicochemical interactions and/or density effects. We have also tested the reactivity of NHA with 1 mg/L hexavalent uranium (U(VI)) and found that complete removal of U(VI) is possible using 0.5 g/L NHA at pH 5 to 6. Our results demonstrate that NHA has the potential to be injected as a dilute slurry for in situ treatment of U(VI)-contaminated groundwater systems.

Kanel, S. R.↗

Continuous-flow synthesis of thermochromic M-phase VO2 particles via rapid one-step hydrothermal reaction – effect of mixers

VO2 particles are promising materials for thermochromic smart windows that reduce building energy loss. Continuous-flow hydrothermal processes showcase advantages for synthesizing VO2 particles compared with traditional batch reaction systems. Mixers play a crucial role in particle fabrication in continuous-flow systems. In this study, a Center T-Mixer and a Collision Cross-Mixer are developed and implemented in a hot water fluidized suspension reaction (HWFSR) system. The influence of the resident time on the particle phase and size was evaluated, and properties of particles derived from systems equipped with differing mixers were compared. The resulting particles were characterized using techniques of X-ray powder diffraction (XRD) analysis, scanning electron microscopy (SEM), and differential scanning calorimetry (DSC). When compared with the Center T-Mixer, results indicate that the Collision Cross-Mixer has better control regarding the morphology and size distribution of resulting particles while improving the transition temperatures of the as-synthesized materials. HWFSR systems containing novel mixer designs are capable of producing pure M-phase VO2 particles in a single step contrary to the current reactor design that use a second postheat treatment step, and they are capable of synthesizing many other nanoparticle species, especially those requiring high temperature and pressure reaction conditions.

continuous-flow process↗

An alkali-free method to manufacture ramie fiber

Ramie is one of the most significant fiber resources and it needs the degumming process to produce fibers. The traditional manufacturing process of ramie fibers requires a large amount of alkali, which causes serious environmental issues. This paper presents a novel path to manufacture ramie fibers without alkali. In this study, ramie bast was pretreated by steam explosion and then treated with deep eutectic solvent. The properties of ramie fibers prepared by the novel alkali-free method, including physical properties, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and X-ray diffraction (XRD), were compared with that produced by the traditional alkali process. Results showed that the fiber qualities, including residual gum content (4.68%), average fiber fineness (1419.99 N m ) and breaking tenacity (5.98 cN/dtex), were comparable with the traditional alkali process, which all meet the requirement of the relevant Chinese National Standards. The FTIR, SEM and XRD results all confirmed the degumming ability of the novel method to manufacture ramie fibers. Furthermore, the novel method was proved to be eco-friendly. Taken together, these data indicate that the novel alkali-free method is green and effective in manufacturing ramie fibers.

42 ENGINEERING↗

Raw electron microscopy images for "The Importance of Nano-edges in Atomic Stencilling and Chiroptically Active Assembly of Patchy Gold Tetrahedra"

This dataset contains the raw transmission electron microscopy (TEM) and scanning electron microscopy (SEM) images used in the main figures of the paper “The Importance of Nano-edges in Atomic Stencilling and Chiroptically Active Assembly of Patchy Gold Tetrahedra (2026).” All the images were acquired at the Materials Research Laboratory, University of Illinois at Urbana-Champaign, by Qian Chen group. 1. We provide five subfolders, each named according to the corresponding figure numbers in the paper. 2. All files in the subfolders for Figures 1–3 and 5 are named as "Panel [letter]_*", where [letter] (e.g., a, b, c) represents the raw images used for the corresponding panels. 3. All files in the subfolder for Figure 4 correspond to panel f and show the configurations of patchy tetrahedra synthesized at varying concentrations of iodide and 2-naphthalenethiol. They are named "Experiment_[number]", where [number] represents the corresponding data points in the phase diagram. 4. In TEM images, the bright and dark regions indicate the polymer patches and nanoparticle cores, respectively. 5. In SEM images, the bright and dark regions indicate the nanoparticle cores and polymer patches, respectively. 6. Abbreviations in file names: HAADF-STEM (high-angle annular dark-field scanning transmission electron microscopy), PINEM (photon-induced near-field electron microscopy), and RCP/LCP (left-/right-handed circularly polarized).

chirality↗

Precipitation and Transformation of Secondary Fe Oxyhydroxides in a Histosol Impacted by Runoff from a Lead Smelter

Secondary Fe(III) oxyhydroxides play a key role in controlling the mobility and bioavailability of trace metals in acidic, sulfate-rich soils, such as mining and smelter sites. Schwertmannite, jarosite, goethite, and ferrihydrite are the most common mineral phases identified in such soils. A good understanding of the precipitation and transformation of these minerals in soils is very important for predicting the mobility and long-term stability of trace metals associated with them. In the present study, bulk powder X-ray diffraction (XRD), scanning electron microscopy (SEM), synchrotron based micro-X-ray diffraction ({mu}-XRD), and micro X-ray fluorescence ({mu}-SXRF) spectroscopy were used to investigate precipitates from the surface horizon of an organic soil (Histosol) at a site that once contained a lead smelter. Soil samples were collected from 0 to -10 cm depth during both wet and dry seasons. Goethite and akaganeite were identified as the major mineral phases in this soil. Schwertmannite and jarosite were also occasionally identified, particularly in the soil samples from dry periods. The peaks in the akaganeite XRD pattern were significantly broadened and the relative intensities of some major peaks were distinctly different compared with the diffraction pattern of synthetic akaganeite, possibly due to the effects of pH and the incorporation of sulfate. The SEM and {mu}-XRD data support the hypothesis that the goethite in the precipitates is not the product of direct precipitation from solution but the transformation of previously precipitated schwertmannite or akaganeite.

54 ENVIRONMENTAL SCIENCES↗

Wafer-scale waveguide sidewall roughness scattering loss characterization by image processing

Photonic integrated circuits (PICs) are vital for developing affordable, high-performance optoelectronic devices that can be manufactured at an industrial scale, driving innovation and efficiency in various applications. Optical loss of modes in thin film waveguides and devices is a critical measure of their performance. Thin film growth, lithography, masking, and etching processes are imperfect processes that introduce significant sidewall and top-surface roughness and cause dominating optical losses in waveguides and photonic structures. This roughness, as perturbations couple light from guided to far-field radiation modes, leads to scattering losses that can be estimated from theoretical models. Typically, with UV-based lithography, sidewall roughness is significantly larger than wafer-top surface roughness. Atomic force microscopy (AFM) imaging measurement gives a 3D and high-resolution roughness profile, but the measurement is inconvenient, costly, and unscalable for large-scale PICs and at wafer-scale. Here, we evaluate the sidewall roughness profile based on 2D high-resolution scanning electron microscope (SEM) imaging. We characterized the loss on two homemade nitride and oxide films on 3-inch silicon wafers with 12 waveguide devices on each and correlated the scattering loss estimated from a 2D image-based sidewall profile and theoretical Payne model. The lowest loss of guided fundamental transverse electric (TE 0 ) mode is found at 0.075 dB/cm at 633 nm across 24 devices, a record at visible wavelength. Our work shows 100% success (edge continuity span exceeding 95% of image width/height) in edge detection in image processing of all images to estimate autocorrelation function and optical mode loss. These demonstrations offer valuable insights into waveguide sidewall roughness and a comparison of experimental and 2D SEM image processing based loss estimations with applications in loss characterization at wafer-scale PICs.

Khurana, Mohit (ORCID:0000000207898672)↗

Birds Shed RNA-Viruses According to the Pareto Principle

A major challenge in disease ecology is to understand the role of individual variation of infection load on disease transmission dynamics and how this influences the evolution of resistance or tolerance mechanisms. Such information will improve our capacity to understand, predict, and mitigate pathogen-associated disease in all organisms. In many hostpathogen systems, particularly macroparasites and sexually transmitted diseases, it has been found that approximately 20% of the population is responsible for approximately 80% of the transmission events. Although host contact rates can account for some of this pattern, pathogen transmission dynamics also depend upon host infectiousness, an area that has received relatively little attention. Therefore, we conducted a meta-analysis of pathogen shedding rates of 24 host (avian) – pathogen (RNA-virus) studies, including 17 bird species and five important zoonotic viruses. We determined that viral count data followed the Weibull distribution, the mean Gini coefficient (an index of inequality) was 0.687 (0.036 SEM), and that 22.0% (0.90 SEM) of the birds shed 80% of the virus across all studies, suggesting an adherence of viral shedding counts to the Pareto Principle. The relative position of a bird in a distribution of viral counts was affected by factors extrinsic to the host, such as exposure to corticosterone and to a lesser extent reduced food availability, but not to intrinsic host factors including age, sex, and migratory status. These data provide a quantitative view of heterogeneous virus shedding in birds that may be used to better parameterize epidemiological models and understand transmission dynamics.

59 BASIC BIOLOGICAL SCIENCES↗

Plasma synthesized boron nano-sized powder: The effect of processing conditions on the crystallographic and microstructural properties

Boron nano-sized powders (doped and undoped) were synthesized by the reaction of boron trichloride, BCl{sub 3}, and hydrogen, H{sub 2}, in a plasma. The gases were mixed and injected into an argon RF plasma where they combined and formed boron powder via gas phase nucleation. Methane gas, CH{sub 4}, was added in the case of carbon-doped powder. These powders were found to be suitable for the fabrication of high performance superconducting magnesium diboride (MgB{sub 2}) wires. Plasma synthesized boron particles typically had the shape of low aspect ratio spheroids that tended to form open, lacy agglomerates. Particle sizes ranged from 10 to 250 nm. A typical batch of boron powder contained a mixture of amorphous and crystalline material. In this study, the effects of plasma power and carbon dopant addition on the crystallinity, particle size, and microstructure of boron nanopowder were investigated using powder x-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and selected area electron diffraction (SAD). Particle size distribution was measured using SEM and TEM images. SAD patterns showed the characteristic halo of an amorphous material, but single crystal reflections were observed as well. Wires made from these powders attained 60,000 A/cm{sup 2} at 5 K and 5 Tesla and attained 25,000 A/cm{sup 2} at 20 K and 3 Tesla.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Proton irradiation-induced blistering in UO2

Abstract Proton (H + ) irradiation effects in polycrystalline UO 2 have been studied. The irradiation was carried out using three ion energies and two different ion fluxes at 600 °C. Scanning electron microscopy (SEM) investigations showed that significant surface flaking took place. Focused ion beam (FIB) milling in SEM was successfully applied for extracting lamellas from uneven blistered surfaces for transmission electron microscopy (TEM) investigations allowing detailed investigations for the degradation mechanisms. High-resolution TEM for the flaked UO 2 surfaces revealed that the implanted H + formed sharp two-dimensional cavities at the peak ion-stopping region instead of diffusing to the matrix. The resulting lateral stress likely caused UO 2 surface deterioration in good agreement with previous blistering and flaking studies on crystalline materials. Graphical abstract

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Study of the Adsorption Space of Modified Clinoptilolites

Carbon dioxide (CO 2 ) adsorption is an important adsorbent characterization method and a significant industrial process. In separation and recovery technology, the adsorption of the CO 2 is important to reduce the concentration of this gas considered as one of the greenhouse gases. Natural zeolites, particularly clinoptilolite, are widely applied as adsorbents. In the present research, the structure, composition and morphology of modified with hexafluorosilicate (HFSi) and orthophosphoric acid (H 3 PO 4 ) clinoptilolites were investigated by characterizations and measurements made with, X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy-energy dispersive X-ray analysis (SEM-EDAX) and gravimetric adsorption. In addition, the surface Chemistry of the modified clinoptilolites was analyzed by applying diffuse reflectance fourier transform infrared spectrometry (DRIFTS). Further, the interaction of CO 2 within the adsorption space of these modified clinoptilolites and a synthetic ZSM-5 zeolite was studied with the help of adsorption measurements. An appropriate theoretical methodology for the analysis of the XRD and adsorption data was applied. The calculated cell parameters of the tested are similar to those reported for a typical clinoptilolite of: a = 17.662 Å, b = 17.911 Å, c = 7.407 Å and β = 116.40 The resolution of the TGA derivative profiles indicated the presence of two steps for water release, one of them represents the loss of majority of the water present in the micropores. This was evidenced as a broad peak centered at about 50°C for the CSW-HFSi-0.1, but at 100 °C for the samples CSW-HFSi-0.4. The SEM micrographs corresponding to the modified clinoptilolites, was evidenced that the CSW zeolite shows secondary particles exhibiting diameters from 3 to 40 μm, formed by primary clinoptilolite crystallites showing a crystallite size, Φ = 40 nm. The EDAX elemental analysis it can be demonstrated that the exchange process replaced about 85% of the charge compensating ions. The DRIFT spectra of the modified clinoptilolites, specifically, CSW-HFSi-0.1, show a narrow band at about: 3,740 cm-l corresponding to terminal silanol groups (Si-OH) and a band 3,600-3,650 cm -1 resulting from extra-framework Al-OH. With the precision of the measured micropore volumes related to the excellent fitting of the adsorption data by the D-R isotherm equation, it can be affirm that carbon adsorption took only place in the micropore region. The isosteric heat of adsorption calculated for the modified clinoptilolites was greater than those values reported of ZSM-5 zeolite, particle packing silica, dealuminated Y zeolite (DAY) Cd, Zn and Ni-nitroprussides and Cu-nitroprusside and a Ni-MOF. With the obtained result it can be concluded that the modified clinoptilolites with HFSi showed a quality as adsorbent comparable to commercial synthetic zeolites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A facile recovery process for cathodes from spent lithium iron phosphate batteries by using oxalic acid

A simplistic and novel leaching process is developed to dispose spent lithium iron phosphate (LiFePO 4 ) batteries. In this paper, oxalic acid is selected as a leaching reagent to recover lithium as a resource and remove phosphorus from LiFePO 4 batteries, benefiting from its low natural effects. The physical properties of spent cathode materials (before leaching) and residues (after leaching) are identified by X-ray diffraction (XRD) and scanning electronic microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS). The total amounts of Li and Fe are analyzed by inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The process occurs under conditions of a 0.3 mol·L -1 oxalic acid concentration, a temperature of 80°C, a reaction time of 60 min and a solid/liquid ratio of 60 g· L -1 . It can effectively precipitate ~92% ferrum in terms of FeC 2 O 4 ·2H 2 O from LiFePO 4 , with the leaching efficiency of Li achieving up to 98%. This method demonstrates a new strategy for dealing with spent lithium iron phosphate batteries with a low cost and low environmental impact.

25 ENERGY STORAGE↗

Automation of particulate characterization

Foreign particles residing on the field carrying surface of accelerator cavities are a known mechanism for field emission. Developing the methods and tools for collecting and characterizing particles found in an accelerator enables process development towards field emission free SRF cavities. Methods are presented for sampling assemblies, components, processes, and environmental conditions utilizing forensic techniques with specialized tooling. Sampling activities to date have produced an inventory of over 850 GSR spindles. Traditional SEM + EDS analysis of this volume of spindles is challenged by labor investment, spindle sampling methods, and the subsequent data pipeline which ultimately results in a statically inadequate dataset for any particulate distribution characterization. A complete systematic analysis of the spindles is enabled by third party software controlling SEM automation for EDS data acquisition. Details of spindle creation, collection equipment, component sampling, automating particle assessment, and data analysis used to characterize samples from beamline elements in CEBAF are presented.

Spradlin, Josh↗