SEARCH · Engineering Papers

Results for “Reacting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Nitridation of Si(111) by nitrogen atoms. II

The reaction between Si(111) and nitrogen atoms has been investigated by LEED, Auger, and electron energy loss (ELS) techniques. The early stage of the reaction at 850-1050 C involves the formation of a chemically reacted monolayer which grows in islands. The sticking coefficient for the submonolayer is estimated to be of the order of unity. Two electronically different surface structures can be formed during these stages, yielding the '8 x 8' and the quadruplet LEED patterns; the quadruplet unit cell is the one with the highest nitrogen density. A pure quadruplet structure is obtained from samples with a carbon contamination of the Si monolayer of about 5 pct. During the multilayer stages, the influence of the substrate is not as important, and the reactions at 850 C and above produce quadruplet-like local structures.

Schrott, A. G.↗

NASA NTRS1983

Characterization of geometric isomers of Norbornene end-capped imides

Three geometric isomers from the thermal isomerization of methylene-4,4' bis(endo-N-phenylbicyclo/2.2.1/hept-2-ene-5,6-di carboximide) (I) were chromatographically separated and isolated in order to investigate the thermal cure of norbornene end-capped imide oligomers, which display considerable promise for use in various aerospace adhesive and composite applications. Endo-endo (I), endo-exo (II), and exo-exo (III) configurations were assigned to each compound based on the results of NMR spectroscopy. Several chromatographic, spectroscopic, and thermal techniques were then used to characterize these three isomers which serve as model compounds for norbornene end-capped polyimides. It was found that each compound thermally isomerized to an equilibrium mixture of all three compounds prior to cure. It is proposed that these compounds react by different mechanisms in air and nitrogen.

Young, P. R.↗

NASA NTRS1983

Results of apparent atomic oxygen reactions on Ag, C, and Os exposed during the Shuttle STS-4 orbits

Films selected for anticipated reaction with atomic oxygen, namely carbon, silver, and osmium, were exposed during the Shuttle STS-4 mission. A silver film within 5 nm of 225 nm thick was converted to a transparent blue-green interference film within 5 nm of 355 nm thick. Both carbon and osmium films 10-30 nm thick apparently formed volatile oxides and disappeared, except where well shielded. A calculated total of approximately 7 x 10 to the 19th oxygen atoms per sq cm struck the surfaces, which could have removed on the order of 3 microns of material if only 10 percent reacted. The absence of apparent effects on adjacent thin and thick gold films is offered as evidence that sputtering is not responsible.

Peters, P. N.↗

NASA NTRS1983

An ISEE 3 high time resolution study of interplanetary parameter correlations with magnetospheric activity

The coupling between the solar wind and the geomagnetic disturbances was examined using data from the ISEE-3 spacecraft at an earth-sun libration point and ground-based data. One minute data were used to avoid aliasing in determining the internal magnetospheric response to solar wind conditions. Attention was given to the cross-correlations between the geomagnetic index (AE), the total energy dissipation rate (UT), and the solar wind parameters, as well as the spatial and temporal scales on which the magnetosphere reacts to the solar wind conditions. It was considered necessary to characterize the physics of the solar wind-magnetosphere coupling in order to define the requirements for a spacecraft like the ISEE-3 that could be used as a real time monitoring system for predicting storms and substorms. The correlations among all but one parameter were lower during disturbance intervals; UT was highly correlated with all parameters during the disturbed times. An intrinsic 25-40 min delay was detected between interplanetary activity and magnetospheric response in quite times, diminishing to no more than 15 min during disturbed times.

Baker, D. N.↗

NASA NTRS1983

Formation and photochemistry of methylamine in Jupiter's atmosphere

In the upper troposphere and lower stratosphere of Jupiter, translationally hot H atoms are produced in the photolysis of ammonia, phospine, and acetylene which react with methane to form methyl radicals. The latter combine with NH2 to form methylamine. It is presently shown that the combined production of methylamine and subsequent photolysis to HCN is unlikely to account for the HCN observed near Jupiter's tropopause. The recommendation of NH2 and C2H3 radicals to yield C2H5N, followed by photolysis to HCN, is the preferred path. An upper limit column density on CH3PH2 is estimated to be about 10 to the 13th/sq cm, as compared to 10 to the 15th/sq cm for CH3NH2.

Kaye, J. A.↗

NASA NTRS1985

Upgrading Metallurgical-Grade Silicon

Closed-loop process produces semiconductor-grade silicon. Metallurgical-grade silicon converted to ultrapure silicon by reacting with hydrogen and silicon tetrahalide to form trihalosilane, purifying this intermediate and again decomposing to high purity silicon in third stage. Heterogeneously and homogeneously nucleated polycrystalline silicon used in semiconductor device applications and in silicon photovoltaic solar cell fabrication.

Woerner, L. M.↗

NASA NTRS1985

Polyurethane Masks Large Areas in Electroplating

Polyurethane foam provides effective mask in electroplating of copper or nickel. Thin layer of Turco maskant painted on area to be masked: Layer ensures polyurethane foam removed easily after served its purpose. Component A, isocyanate, and component B, polyol, mixed together and brushed or sprayed on mask area. Mixture reacts, yielding polyurethane foam. Foam prevents deposition of nickel or copper on covered area. New method saves time, increases productivity and uses less material than older procedures.

Beasley, J. L.↗

NASA NTRS1983

Viscous shock-layer predictions of three-dimensional nonequilibrium flows past the space shuttle at high angle of attack

Computational solutions were obtained for chemically reacting flowfields over the entire windward surface of the Space Shuttle at high angle of attack. The recently developed computational method for the Space Shuttle is capable of treating three dimensional viscous nonequilibrium air flow as well as equilibrium air and perfect gas flows. A general nonorthogonal computational grid system is used to treat the nonaxisymmetric geometry. Boundary conditions take into account noncatalytic wall, equilibrium with noncatalytic wall condition are compared to the fully catalytic wall solutions, the equilibrium air solutions, the perfect gas solutions, and also the Shuttle flight heating and pressure data. The comparisons show good agreement and correlations in most cases.

Kim, M. D.↗

NASA NTRS1983

A review of nonequilibrium effects and surface catalysis on shuttle heating

A review is given of the nonequilibrium calculation techniques by various authors over the past decade to predict heat fluxes to the windward side of the Space Shuttle orbiter. The results of these techniques are compared with measurements made on the first few flights of the Space Shuttle. The calculations attempt to account for finite rate chemistry in the shock layer around the vehicle and for finite rate catalytic atom recombination on the thermal protection materials. The techniques considered are the axisymmetric viscous shock layer method, three dimensional reacting Euler equation solutions coupled with axisymmetric analog boundary layer method, and a recently developed nonequilibrium 3-D viscous shock layer method.

Scott, C. D.↗

NASA NTRS1984

Phenoxy resins containing pendent ethynyl groups

As part of an effort on tougher/solvent resistant matrix resins for composites, research was directed towards exploring methods to improve the solvent resistance of linear amorphous thermoplastics. Ethyl reactive groups were placed on the ends of oligomers and pendent along the polymer chain and subsequently thermally reacted to provide crosslinking and thus improvement in solvent resistance. This concept is extended to another thermoplastic, a phenoxy resin. A commercially available phenoxy resin (PKHH) was systematically modified by reaction of the pendent hydroxyl groups on the phenoxy resin with various amounts of 4-ethynylbenzoyl chloride. As the pendent ethynyl group content in the phenoxy resin increased, the cured resin exhibited a higher glass transition temperature, better solvent resistance and less flexibility. The solvent resistance was further improved by correcting a low molecular weight diethynyl compound, 2,2-bis(4-ethynylbenzoyloxy-4'-phenyl)propane, with a phenoxy resin containing pendent ethynyl groups.

Hergenrother, P. M.↗

NASA NTRS1984

Mechanism of lubrication by tricresylphosphate (TCP)

The coefficient of friction was measured as a function of temperature on a pin-on-disk tribometer. Pins and disks of 440C and 52100 steels were lubricated with tricresylphosphate (TCP), 3.45 percent TCP in squalene, and pure squalene. The M-50 pins and disks were lubricated with 3.45 percent TCP in squalene and pure squalene. Experiments were conducted under limited lubrication conditions in dry ( 100 ppm H2O) air and dry ( pp H2O) nitrogen at 50 rpm (equivalent to a sliding velocity of 13 cm sec) and a constant load of 9.8 N (1 kg). Characteristic temperatures T sub r were identified for TCP on 52100 steel and for squalene on M-50 and 52100 steels, where the friction decreased because of a chemical reaction between the lubricant and the metal surface. The behavior of squalene obscured the influence of 3.45 percent TCP solute on the friction of the system. Wear volume measurements demonstrated that wear was lowest at temperatures just above T sub r. Comparing the behavior of TCP on M-50, 440C, and 52100 steels revealed that the TCP either reacted to give T sub r behavior or produced initial failure in the temperature range 223 + or - 5 C.

Faut, O. D.↗

NASA NTRS1984

Combustion Fundamentals Research

The various physical processes that occur in the gas turbine combustor and the development of analytical models that accurately describe these processes are discussed. Aspects covered include fuel sprays; fluid mixing; combustion dynamics; radiation and chemistry and numeric techniques which can be applied to highly turbulent, recirculating, reacting flow fields.

Source record↗

NASA NTRS1984

Turbulent swirling combustion

The non-reacting flow produced by two confined, co- and/or counter-swirling jets wre measured by means of a two-color laser Doppler velocimeter. These results are compared with earlier experiments and with numerical predictions. It is shown that under both swirl conditions, a closed recirculation zone is created at the combustor center line. This zone is characterized by the presence of a one-cell toroidal vortex, low tangential velocities, high turbulent intensity, and large dissipation rates of the kinetic energy of turbulence.

Sommer, H. T.↗

NASA NTRS1984

Velocity visualization in gaseous flows

Techniques yielding simultaneous, multiple-point measurements of velocity in reacting or nonreacting flow fields have the potential to significantly impact basic and applied studies of fluid mechanics. This research program is aimed at investigating several candidate schemes which could provide such measurement capability. The concepts under study have in common the use of a laser source (to illuminate a column, a grid, a plane or a volume in the flow) and the collection of light at right angles (from Mie scattering, fluorescence, phosphorescence or chemiluminescence) using a multi-element solid-state camera (100 x 100 array of photodiodes). The work will include an overview and a status report of work in progress with particular emphasis on the method of Doppler-modulated absorption.

Hanson, R. K.↗

NASA NTRS1984

Random vortex method for combusting flows

The random vortex method (RVM) of Chorin was developed by the recirculating flows. The RVM method models turbulence from first principles, tracking the vorticity and obtaining the interaction of vorticity with the bulk flow field. A computer program was produced called MIMOC, Modeling the Interface Motion of Combustion, which can be used to calculate the reacting flow field behind a rearward facing step. Several comparisons between experimental data and calculations were made. The RVM methood computes qualitatively good results, but the quantitative agreement as yet is not completely satisfactory. Much of the difficulty may be caused by the treatment of boundary conditions and the techniques used for obtaining statistical averages of velocities and turbulence quantities. For the rearward facing step the computed reattachment length equals the experimental value. However, the reverse velocity in the recirculation zone is over predicted by 300 percent. In the calculations, a uniform entrance velocity was assumed with no boundary layer at the step lip. This high velocity may be overdriving the reverse flow region.

Marek, C. J.↗

NASA NTRS1983

Diffusion barriers

The choice of the metallic film for the contact to a semiconductor device is discussed. One way to try to stabilize a contact is by interposing a thin film of a material that has low diffusivity for the atoms in question. This thin film application is known as a diffusion barrier. Three types of barriers can be distinguished. The stuffed barrier derives its low atomic diffusivity to impurities that concentrate along the extended defects of a polycrystalline layer. Sacrificial barriers exploit the fact that some (elemental) thin films react in a laterally uniform and reproducible fashion. Sacrificial barriers have the advantage that the point of their failure is predictable. Passive barriers are those most closely approximating an ideal barrier. The most-studied case is that of sputtered TiN films. Stuffed barriers may be viewed as passive barriers whose low diffusivity material extends along the defects of the polycrystalline host.

Nicolet, M. A.↗

NASA NTRS1984

Infrared emission associated with chemical reactions on Shuttle and SIRTF surfaces

The infrared intensities which would be observed by the Shuttle Infrared Telescope Facility (SIRTF), and which are produced by surface chemistry following atmospheric impact on SIRTF and the shuttle are estimated. Three possible sources of reactants are analyzed: (1) direct atmospheric and scattered contaminant fluxes onto the shuttle's surface; (2) direct atmospheric and scattered contaminant fluxes onto the SIRTF sunshade; and (3) scattered fluxes onto the cold SIRTF mirror. The chemical reactions are primarily initiated by the dominent flux of reactive atomic oxygen on the surfaces. Using observations of the optical glow to constrain theoretical parameters, it is estimated for source (1) that the infrared glow on the SIRTF mirror will be comparable to the zodiacal background between 1 and 10 micron wavelengths. It is speculated that oxygen reacts with the atoms and the radicals bound in the organic molecules that reside on the shuttle and the Explorer surfaces. It is concluded that for source (2) that with suitable construction, a warm sunshade will produce insignificant infrared glow. It is noted that the atomic oxygen flux on the cold SIRTF mirror (3) is insufficient to produce significant infrared glow. Infrared absorption by the ice buildup on the mirror is also small.

Hollenbach, D. J.↗

NASA NTRS1983

Absorbable-susceptor joining of ceramic surfaces

An assembly of ceramic surfaces particularly refractory metal oxides and carbides, abutting a thin sheet of metal susceptor material are placed in a chamber of an enclosure containing inert gas. An RF coil is activated by power supply to melt the susceptor and adjacent zones of the ceramic. Reactive gas such as oxygen or a carbonizing gas is then fed to the chamber and reacts with the susceptor to form compounds which disperse and dissolve in the zones. On cooling, a strong joint is formed. The susceptor may contain inner perforations and outer perforations to aid in distribution of heat.

Schroeder, J. E.↗