Portable Plating System
Plating system mounted on portable cart includes 30-gallon (23.5 liter) electrolyte tank, filler pump, heaters, replenishing anodes, plating rectifiers and tank rectifier to continously remove contaminants.
Flores, R.↗
SEARCH · Engineering Papers
Results for “Plating”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Experimental study of surface pressures induced on a flat plate and a body of revolution by various dual jet configurations
The effect of the angle of a jet to a crossflow, the performance of dual jet configurations, and a jet injected from a body of revolution as opposed to a flat plate were investigated during experiments conducted in the 7x10 tunnel at NASA Ames at Velocities from 14.5 m/sec to 35.8 m/sec (47.6 to 117.4 ft/sec.). Pressure distributions are presented for single and dual jets over a range of velocity ratios from 2 to 10, spacings from 2 to 6 diameters and injection angles of 90, 75, 60, and 105 degrees. For the body of revolution tests, the ratio of the jet to body diameters was set as large (1/2) in order to be more representative of V/STOL aircraft applications. Flat plate tests involved dual jets both aligned and in side by side configurations. The effects of the various parameters and the differences between the axisymmetric and planar body geometrics on the nature, size, shape, and strength of the interaction regions on the body surfaces are shown. Some flowfield measurements are also presented, and it is shown that a simple analysis is capable of predicting the trajectories of the jets.
Schetz, J. A.↗
Models for rupture mechanics of plate boundaries and crustal deformation
The role of pull aparts and pushups in transcurrent systems, the rotation of faults and blocks within transcurrent fault systems, the role of accretion tectonics in plate boundary deformation, and power law creep behavior and the yielding at plate boundaries were investigated.
Nur, A.↗
Frictional and morphological characteristics of ion plated soft, metallic films
Ion plated metallic films in contrast to films applied by other deposition techniques offer a lower friction coefficient, longer endurance lives and exhibit a gradual increase in friction coefficient after the film has been worn off. The friction coefficients of metallic films are affected by the degree of adherence, thickness and nucleation and growth characteristics during ion plating lead to a fine, continuous crystalline structure, which contributes to a lower friction coefficient.
Spalvins, T.↗
Geometrically nonlinear analysis of layered composite plates and shells
A degenerated three dimensional finite element, based on the incremental total Lagrangian formulation of a three dimensional layered anisotropic medium was developed. Its use in the geometrically nonlinear, static and dynamic, analysis of layered composite plates and shells is demonstrated. A two dimenisonal finite element based on the Sanders shell theory with the von Karman (nonlinear) strains was developed. It is shown that the deflections obtained by the 2D shell element deviate from those obtained by the more accurate 3D element for deep shells. The 3D degenerated element can be used to model general shells that are not necessarily doubly curved. The 3D degenerated element is computationally more demanding than the 2D shell theory element for a given problem. It is found that the 3D element is an efficient element for the analysis of layered composite plates and shells undergoing large displacements and transient motion.
Chao, W. C.↗
An intercomparison of NEL and DHL water flow facilities using a twin orifice plate flowmeter assembly
A 205 mm transfer standard orifice plate meter assembly, consisting of two orifice plates in series separated by a length of pipe containing a flow straightener, was calibrated in two water flow facilities. Results show that the agreement in the characteristics of such a differential pressure transfer standard package is within 0.17% over a 10:1 range from flow rates of approximately 8 to 80 l/sec. When the range over which the comparison was made was limited to that for which the calibration graphs gave straight lines, the agreement is 0.1% in 3 of the 4 calibrations (0.17% in the fourth).
Dejong, J.↗
Scattering by single ice needles and plates at 30 GHz
Because of the small loss tangent of ice at 30-50 GHz, significant depolarization of satellite-to-ground communication signals could occur due to the presence of cirrus clouds in their paths. It is known that cirrus clouds basically consist of ice needles and plates. Extensive calculations have been performed for the problem of scattering by a family of ice needles and plates for various length-to-width ratios ranging from 1 to 10. Scattering results with special attention to induced cross-polarized fields will be presented.
Yeh, C.↗
On the OLP prediction of the unstable modes of the flat plate turbulent boundary layer
The Orr et al. (OLP) stability analysis is reformulated to yield profiles from hot-wire velocity covariance data in the boundary layer of a flow over a flat plate. The proper orthogonal decomposition theorem (PODT) is used to maximize the mean square of the inner product of the velocity vector with a deterministic candidate vector function in Hilbert space. The OLP formulation couples the PODT for the eddy viscosity with a global extremum principle for the disturbance kinetic energy. Derivation of the governing equations is described analytically, as are the extraction of the mean velocity profile and the eddy viscosity. Finally, techniques for characterizing the dominant mode of the velocity field are introduced and applied to three-dimensional flow over a flat plate. Good agreement is found between the predictions, using laboratory data, and the measured energy and three-dimensional structures of the dominant eddies.
Wadia, A. R.↗
Stress concentrations in cylindrically orthotropic plates with radial variation of the compliances
The stresses in a circular composite plate with a central circular hole in which the material is cylindrically orthotropic and the compliances vary with distance from the center are calculated. A numerical example shows that an arrangement of the fibers at predominantly + or - 45 deg to the radii in the neighborhood of the hole reduces the stress concentrations significantly in an otherwise quasi-isotropic plate.
Muser, C.↗
Pressure-Letdown Plates for Coal Gasifiers
Variation of pseudoporous plates used with coal gasifiers in pressure letdown stage of processing minimize clogging. Rotating plates containing variable gap annuli continually change flow path to enable erosionless reduction of gas pressure. Particles that otherwise clog porous plugs pass through gaps.
Collins, E. R., Jr.↗
Ion sputter textured graphite electrode plates
A specially textured surface of pyrolytic graphite exhibits extremely low yields of secondary electrons and reduced numbers of reflected primary electrons after impingement of high energy primary electrons. Electrode plates of this material are used in multistage depressed collectors. An ion flux having an energy between 500 iV and 1000 iV and a current density between 1.0 mA/sq cm and 6.0 mA/sq cm produces surface roughening or texturing which is in the form of needles or spires. Such textured surfaces are especially useful as anode collector plates in high tube devices.
Curren, A. N.↗
Buckling and vibration of any prismatic assembly of shear and compression loaded anisotropic plates with an arbitrary supporting structure
The computer program designated 'VIPASA', which accurately treats buckling and vibration in prismatic plate assemblies with a response that varies sinusoidally in the longitudinal direction, has been found to be limited by the production of an in-plane shear loading of component plates that produces skewed mode shapes. These do not conform to desired support conditions. This problem is presently overcome through a coupling of the VIPASA stiffness matrices for different wavelength responses by means of the Lagrangian Multipliers method. The theory extends to supports at arbitrary locations, and even to the support provided by any elastic structure. The generality and capabilities of VIPASA have been retained in the computer program designated 'VICON', which permits constraints and a supporting structure consisting of any number of transverse beam columns.
Anderson, M. S.↗
A mixed finite element for the analysis of laminated plates
A new mixed shear-flexible finite element based on the Hellinger-Reissner's variational principle is developed. The element is constructed using a mixed formulation of the shear deformation theory of laminated composite plates, and consists of three displacements, two shear rotations, and three moments as the independent degrees of freedom. The numerical convergence and accuracy characteristics of the element are investigated for bending of laminated anisotropic composite plates. The element is relatively simple to construct and has better accuracy and convergence features when compared to other conventional finite elements.
Putcha, N. S.↗
Flat-plate solar array progress and plans
The emphasis of the Flat-plate Solar Array Project has been shifted from price goals and commercial development toward longer-term, higher risk, higher-potential-payoff opportunities. The revised objectives, status, and plans of the project are presented and technical progress is noted in the areas of: large-area sheet formation; silicon feedstock refinement; flat-plate module process sequence development; and engineering and environmental testing.
Callaghan, W. T.↗
Microchannel plate EUV detectors for the Extreme Ultraviolet Explorer
The design and operating characteristics of the prototype imaging microchannel plate (MCP) detector for the Extreme Ultraviolet Explorer (EUVE) Satellite are discussed. It is shown that this detector has achieved high position resolution performance (greater than 512 x 512 pixels) and has low (less than one percent) image distortion. In addition, the channel plate scheme used has tight pulse height distributions (less than 40 percent FWHM) for UV radiation and displays low (less than 0.2 cnt/sq cm-s) dark background counting rates. Work that has been done on EUV filters in relation to the envisaged filter and photocathode complement is also described.
Siegmund, O. H. W.↗
Neogene Caribbean plate rotation and associated Central American tectonic evolution
A theoretical model of the opening of the Cayman Trough is developed on the basis of geological evidence from a wide area. It is proposed that strike slip motion began about 30 Myr ago and proceeded at a rate of 37 + or - 6 mm/yr for a total of 1100 km of relative plate displacement, and that Central America Underwent an anticlockwise rotation with internal plate deformation. Maps of the reconstructed motion are provided.
Wadge, G.↗
Generic Karman-Rostovstev plate equations in an affine space
The Karman-Rostovstev plate equations are affinely transformed into equations that depend on the generic plate constants generalized rigidity, generalized extensional rigidity, and generalized Poisson ratio associated with the well-known linearized orthotropic plate/slab equations. Furthermore, since the generalized extensional rigidity is a function of generalized rigidity and generalized Poisson ratio only, with generalized Poisson ratio being a weak parameter, the only fundamental constant is generalized rigidity. This means that regardless of what analysis technique is used, the results can be cast in terms of only one strong material parameter (whose range is from zero to one). The affine stretching is performed on the dependent variables as well as the independent variables, so that the dependence of all quantities of interest on generalized rigidity and generalized Poisson ratio are easily calculated (e.g., even auxiliary quantities such as stress, strain, all weighted stress resultants, etc.). Some typical results (static side load response, collapse load limited by rib buckling) are presented by modifying an approximate technique due to Donnell (1976).
Brunelle, E. J.↗
Stresses around holes in pin-loaded orthotropic plates
The effects of pin elasticity, pin/hole friction, and pin/hole clearance on the stresses around a hole in a pin-loaded orthotropic plate were studied. The problem was modeled as a planar problem, the pin and plate being two elastic bodies interacting through contact. Complex variable elasticity, a collocation scheme to enforce the pin/hole boundary conditions, and an iteration procedure to find the contact, slip, and no-slip regions were used to obtain numerical results. The results indicate that pin elasticity is not as important a variable as friction and clearance are. A rigid pin assumption, as opposed to the popular cosinusoidal radial traction, can be used without much error but clearance and friction should not be ignored.
Hyer, M. W.↗