Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mathematical Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Influence of small oxygen additions on the small-signal-gain dynamics in the active medium of a pulsed electron-beam-controlled discharge CO laser

The method for measuring the rate constants of the VV' exchange between CO and O{sub 2} molecules is developed. The method is based on a comparison of the measured and numerically calculated small-signal-gain (SSG) dynamics in the active medium of a pulsed electron-beam-controlled cryogenic CO laser. The SSG dynamics was measured in CO-He-O{sub 2} mixtures with the fixed CO:He = 1:4 ratio by varying the oxygen content from 0 to 4%. The SSG dynamics was measured by probing the active medium of the pulsed CO laser by a beam from a tunable cw CO laser. The mathematical model of the CO laser takes into account the influence of oxygen on energy exchange processes. The parameters of the analytic approximation for constants of the near-resonance VV' exchange CO(v)+O{sub 2}(u=0) {yields} CO(v-1)+O{sub 2}(u=1) are determined by the developed method for quantum vibrational numbers v = 18-24. In particular, the rate constant for v = 20 is (3.1{+-}0.5)x10{sup -12} cm{sup 3} s{sup -1} at the gas temperature of 150 K. The extrapolation of the obtained analytic expression for rate constants in gases at room temperature gives the reasonable agreement with the measurements performed earlier for v = 12 and 13. (active media. lasers)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Melting rate correlation with batch properties and melter operating conditions during conversion of nuclear waste melter feeds to glasses

The rate of conversion of nuclear waste melter feed to glass is affected by the selection of melter feed materials and by melter design and operation. The melting rate correlation (MRC) is an equation that relates the glass production rate with two types of variables: (1) feed and melt properties: conversion heat, cold-cap bottom temperature, and glass melt viscosity; and (2) melter design and operation parameters: melter geometry, melter operating temperature, and gas bubbling rate. The MRC shows good agreement for an extended melting-rate data set of high-level waste (HLW) melter feeds and a data set generated for low-activity waste (LAW) melter feeds. Laboratory observation of heated melter feed samples is often used to assess the cold-cap bottom temperature of HLW melter feeds (moderately foaming feeds), but this technique appears inadequate for LAW melter feeds (vigorously foaming feeds). For LAW feeds, an adequate assessment of the cold-cap bottom temperature was achieved using evolved gas analysis, which allows identification of the collapse of primary foam for oxidized feeds. This assessment shows that the cold-cap bottom temperature for vigorously foaming LAW feeds is higher than that for moderately foaming HLW feeds. When the results of MRC are compared, LAW feeds are generally less sensitive to the bubbling rate and melt viscosity, and more sensitive to the cold-cap bottom temperature than HLW feeds. The MRC qualifies as a promising tool to support the selection of melter feed materials and melter operating conditions, which is determined from expensive independent scaled melter experiments, and sophisticated mathematical models.

Lee, Seung Min↗

A Research Program for Fission Product/Dust Transport in HTGR’s

High and Very High Temperatures Gas Reactors (HTGRs/VHTRs) have five barriers to fission product (FP) release: the TRISO fuel coating, the fuel elements, the core graphite, the primary coolant system, and the reactor building. This project focused on measurements and computations of FP diffusion in graphite, FP adsorption on graphite and FP interactions with dust particles of arbitrary shape. Diffusion Coefficients of Cs and Iodine in two nuclear graphite were obtained by the release method and use of Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) and Instrumented Neutron Activation Analysis (INAA). A new mathematical model for fission gas release from nuclear fuel was also developed. Several techniques were explored to measure adsorption isotherms, notably a Knudsen Effusion Mass Spectrometer (KEMS) and Instrumented Neutron Activation Analysis (INAA). Some of these measurements are still in progress. The results will be reported in a supplemental report later. Studies of FP interactions with dust and shape factors for both chain-like particles and agglomerates over a wide size range were obtained through solutions of the diffusion and transport equations. The Green's Function Method for diffusion and Monte Carlo technique for transport were used, and it was found that the shape factors are sensitive to the particle arrangements, and that diffusion and transport of FPs can be hindered. Several journal articles relating to the above work have been published, and more are in submission and preparation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

On one modification of traveling salesman problem oriented on application in atomic engineering

The mathematical model of a problem of minimization of a dose of an irradiation of the personnel which is carrying out dismantling of the completing block of a nuclear power plant is considered. Dismantling of elements of the block is carried out consistently. A brigade of workers having carried out dismantling of the next element of the block passes to similar work on other element of the block. Thus it is supposed that on the sequence of performance of works restrictions are imposed. These restrictions assume that on a number of pairs of works the condition is imposed: the second work cannot be executed before the first. This problem is similar to a known traveling salesman problem with the difference that expenses function depends on the list of outstanding works, and on sequence of performance of works and corresponding motions the constraints in the form of antecedence are imposed. The variant of the dynamic programming method is developed for such problem and the corresponding software is created.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

An Extremal Eigenvalue Problem for a Two-Phase Conductor in a Ball

The pioneering works of Murat and Tartar (Topics in the mathematical modeling of composite materials. PNLDE 31. Birkhaeuser, Basel, 1997) go a long way in showing, in general, that problems of optimal design may not admit solutions if microstructural designs are excluded from consideration. Therefore, assuming, tactilely, that the problem of minimizing the first eigenvalue of a two-phase conducting material with the conducting phases to be distributed in a fixed proportion in a given domain has no true solution in general domains, Cox and Lipton only study conditions for an optimal microstructural design (Cox and Lipton in Arch. Ration. Mech. Anal. 136:101-117, 1996). Although, the problem in one dimension has a solution (cf. Krein in AMS Transl. Ser. 2(1):163-187, 1955) and, in higher dimensions, the problem set in a ball can be deduced to have a radially symmetric solution (cf. Alvino et al. in Nonlinear Anal. TMA 13(2):185-220, 1989), these existence results have been regarded so far as being exceptional owing to complete symmetry. It is still not clear why the same problem in domains with partial symmetry should fail to have a solution which does not develop microstructure and respecting the symmetry of the domain. We hope to revive interest in this question by giving a new proof of the result in a ball using a simpler symmetrization result from Alvino and Trombetti (J. Math. Anal. Appl. 94:328-337, 1983)

97 MATHEMATICS AND COMPUTING↗

Approximating high-dimensional dynamics by barycentric coordinates with linear programming

The increasing development of novel methods and techniques facilitates the measurement of high-dimensional time series but challenges our ability for accurate modeling and predictions. The use of a general mathematical model requires the inclusion of many parameters, which are difficult to be fitted for relatively short high-dimensional time series observed. Here, we propose a novel method to accurately model a high-dimensional time series. Our method extends the barycentric coordinates to high-dimensional phase space by employing linear programming, and allowing the approximation errors explicitly. The extension helps to produce free-running time-series predictions that preserve typical topological, dynamical, and/or geometric characteristics of the underlying attractors more accurately than the radial basis function model that is widely used. The method can be broadly applied, from helping to improve weather forecasting, to creating electronic instruments that sound more natural, and to comprehensively understanding complex biological data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A mathematical and numerical framework for the analysis of compressible thermal convection in gases at very high temperatures

The relevance of non-equilibrium phenomena, nonlinear behavior, gravitational effects and fluid compressibility in a wide range of problems related to high-temperature gas-dynamics, especially in thermal, mechanical and nuclear engineering, calls for a concerted approach using the tools of the kinetic theory of gases, statistical physics, quantum mechanics, thermodynamics and mathematical modeling in synergy with advanced numerical strategies for the solution of the Navier–Stokes equations. The reason behind such a need is that in many instances of relevance in this field one witnesses a departure from canonical models and the resulting inadequacy of standard CFD approaches, especially those traditionally used to deal with thermal (buoyancy) convection problems. Starting from microscopic considerations and typical concepts of molecular dynamics, passing through the Boltzmann equation and its known solutions, we show how it is possible to remove past assumptions and elaborate an algorithm capable of targeting the broadest range of applications. Moving beyond the Boussinesq approximation, the Sutherland law and the principle of energy equipartition, the resulting method allows most of the fluid properties (density, viscosity, thermal conductivity, heat capacity and diffusivity, etc.) to be derived in a rational and natural way while keeping empirical contamination to the minimum. Special attention is deserved as well to the well-known pressure issue. With the application of the socalled multiple pressure variables concept and a projection-like numerical approach, difficulties with such a term in the momentum equation are circumvented by allowing the hydrodynamic pressure to decouple from its thermodynamic counterpart. The final result is a flexible and modular framework that on the one hand is able to account for all the molecule (translational, rotational and vibrational) degrees of freedom and their effective excitation, and on the other hand can guarantee adequate interplay between molecular and macroscopic-level entities and processes. Performances are demonstrated by computing some incompressible and compressible benchmark test cases for thermal (gravitational) convection, which are then extended to the high-temperature regime taking advantage of the newly developed features.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Immune Response to Electromagnetic Fields through Cybernetic Modeling

We study the optimality of the humoral immune response through a mathematical model, which involves the effect of electromagnetic fields over the large lymphocytes proliferation. Are used the so called cybernetic variables in the context of the matching law of microeconomics or mathematical psychology, to measure the large lymphocytes population and to maximize the instantaneous antibody production rate in time during the immunologic response in order to most efficiently inactivate the antigen.

60 APPLIED LIFE SCIENCES↗

Edge localized mode rotation and the nonlinear dynamics of filaments

Edge Localized Modes (ELMs) rotating precursors were reported few milliseconds before an ELM crash in several tokamak experiments. Also, the reversal of the filaments rotation at the ELM crash is commonly observed. In this article, we present a mathematical model that reproduces the rotation of the ELM precursors as well as the reversal of the filaments rotation at the ELM crash. Linear ballooning theory is used to establish a formula estimating the rotation velocity of ELM precursors. The linear study together with nonlinear magnetohydrodynamic simulations give an explanation to the rotations observed experimentally. Unstable ballooning modes, localized at the pedestal, grow and rotate in the electron diamagnetic direction in the laboratory reference frame. Approaching the ELM crash, this rotation decreases corresponding to the moment when the magnetic reconnection occurs. During the highly nonlinear ELM crash, the ELM filaments are cut from the main plasma due to the strong sheared mean flow that is nonlinearly generated via the Maxwell stress tensor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modification of the MTS model for high strain-rate behavior of TI-6AL-4V

The Mechanical Threshold Stress (MTS) model provides excellent predictive capabilities for the material constitutive response for a wide range of temperatures and strain rates. However, the MTS model fails to capture the rapidly increasing yield stress at high strain rate behavior as the deformation controlling mechanism transitions from thermal activation to drag mechanisms, only capturing the linear behavior. Further, the model typically over predicts the flow stress behavior at yield and post yield due to its use of a constant work hardening rate parameter derived from the stress–strain response at constant saturation stress. An alternative approach to fitting portions of the MTS model is investigated and mathematical models are developed to address these issues. The results show that with appropriate experimental data, the mechanical threshold stress and work hardening rate parameters within the MTS model can quite easily and accurately be modified to extend applicability to high strain rate behavior and more accurately model the initial flow stress behavior at early work hardening rates without modification of the functions core to the MTS model itself.

36 MATERIALS SCIENCE↗

A mathematical simulation model of the CH-47B helicopter, volume 1

A nonlinear simulation model of the CH-47B helicopter was adapted for use in the NASA Ames Research Center (ARC) simulation facility. The model represents the specific configuration of the ARC variable stability CH-47B helicopter and will be used in ground simulation research and to expedite and verify flight experiment design. Modeling of the helicopter uses a total force approach in six rigid body degrees of freedom. Rotor dynamics are simulated using the Wheatlely-Bailey equations including steady-state flapping dynamics. Also included in the model is the option for simulation of external suspension, slung-load equations of motion.

Weber, J. M.↗

Evaluation of Mathematical Turbulence Models

Simplified models for internal flow described, and their predictions compared with experimental results. Report presents account of various models used in computation of turbulent flows. Applications of these models to internal flows evaluated by analysis of predictions of various turbulence models in some important flow configurations.

Nallasamy, M.↗

Partitioning and packing mathematical simulation models for calculation on parallel computers

The development of multiprocessor simulations from a serial set of ordinary differential equations describing a physical system is described. Degrees of parallelism (i.e., coupling between the equations) and their impact on parallel processing are discussed. The problem of identifying computational parallelism within sets of closely coupled equations that require the exchange of current values of variables is described. A technique is presented for identifying this parallelism and for partitioning the equations for parallel solution on a multiprocessor. An algorithm which packs the equations into a minimum number of processors is also described. The results of the packing algorithm when applied to a turbojet engine model are presented in terms of processor utilization.

Arpasi, D. J.↗

Research on the structural dynamics verification of flexible spacecraft

Langley spacecraft structural dynamics research based on a broad range of experimental and analytical studies, which contributed to the technology base for designing and building advanced spacecraft structures, is reviewed. It is concluded that considerable progress has been made toward developing the scale model technology for validating mathematical models used to predict the on-orbit dynamic behavior of spacecraft structures. Advanced suspension systems for testing models of spacecraft as well as feasibility of using modal data to detect damage in truss-type structures were demonstrated.

Kvaternik, Raymond G.↗

Quasi-Linear Parameter Varying Representation of General Aircraft Dynamics Over Non-Trim Region

For applying linear parameter varying (LPV) control synthesis and analysis to a nonlinear system, it is required that a nonlinear system be represented in the form of an LPV model. In this paper, a new representation method is developed to construct an LPV model from a nonlinear mathematical model without the restriction that an operating point must be in the neighborhood of equilibrium points. An LPV model constructed by the new method preserves local stabilities of the original nonlinear system at "frozen" scheduling parameters and also represents the original nonlinear dynamics of a system over a non-trim region. An LPV model of the motion of FASER (Free-flying Aircraft for Subscale Experimental Research) is constructed by the new method.

Shin, Jong-Yeob↗

Method and system for dynamic probabilistic risk assessment

The DEFT methodology, system and computer readable medium extends the applicability of the PRA (Probabilistic Risk Assessment) methodology to computer-based systems, by allowing DFT (Dynamic Fault Tree) nodes as pivot nodes in the Event Tree (ET) model. DEFT includes a mathematical model and solution algorithm, supports all common PRA analysis functions and cutsets. Additional capabilities enabled by the DFT include modularization, phased mission analysis, sequence dependencies, and imperfect coverage.

Dugan, Joanne Bechta↗