Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Growth temperature-dependent metal–insulator transition of vanadium dioxide epitaxial films on perovskite strontium titanate (111) single crystals

Vanadium dioxide (VO{sub 2}) epitaxial films were grown on perovskite single-crystal strontium titanate (SrTiO{sub 3}) substrates by reactive radio-frequency magnetron sputtering. The growth temperature-dependent metal–insulator transition (MIT) behavior of the VO{sub 2} epitaxial films was then investigated. We found that the order of magnitude of resistance change across the MIT increased from 10{sup 2} to 10{sup 4} with increasing growth temperature. In contrast, the temperature of the MIT does not strongly depend on the growth temperature and is fairly stable at about 345 K. On one hand, the increasing magnitude of the MIT is attributed to the better crystallinity and thus larger grain size in the (010)-VO{sub 2}/(111)-SrTiO{sub 3} epitaxial films at elevated temperature. On the other hand, the strain states do not change in the VO{sub 2} films deposited at various temperatures, resulting in stable V-V chains and V-O bonds in the VO{sub 2} epitaxial films. The accompanied orbital occupancy near the Fermi level is also constant and thus the MIT temperatures of VO{sub 2} films deposited at various temperatures are nearly the same. This work demonstrates that high-quality VO{sub 2} can be grown on perovskite substrates, showing potential for integration into oxide heterostructures and superlattices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Giant magnetoresistance and superparamagnetism in Dy{sub x}Fe{sub 100-x} nanogranular magnetic thin films at room temperature

In this article, Dy{sub x}Fe{sub 100-x} nanogranular (15 ≤ x ≤ 25) thin films have been prepared at ambient temperature by dc magnetron sputtering. The correlation between the microstructure, magneto transport and magnetization properties is discussed. The grain size of Dy (Dysprosium) and Fe (Iron) was measured to be about 2 to 3 nm, respectively and the distribution of grains was homogenous throughout the sample. The magnetoresistance is sensitive to microstructural changes (particle size as well as Dy concentration). At the room temperature, the magnetoresistance [MR %] increased from 0.2 to 2.2 with increase in atomic concentration of Dy from x = 15 to 25 and we obtained maximum 2.2 MR [%] for x = 25 in this series of samples. The magnetization studies have revealed that all the samples are superparamagnetic (SPM) at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Linear and nonlinear optical properties of SrBi{sub 4}Ti{sub 4}O{sub 15} thin films

Polycrystalline SrBi{sub 4}Ti{sub 4}O{sub 15} thin films with good morphology and layered perovskite structure were fabricated on fused silica substrates using r f magnetron sputtering system at various oxygen mixing percentages (25 and 50). The crystallite sizes of the particles are in 17-28 nm range. The Nonlinear optical properties were investigated by using Z-scan method at a wavelength of 800 nm with 2 ps duration pulses. The films exhibit the fast and giant optical nonlinearities having the two-photon absorption coefficient (β) with magnitude of 10{sup −8}-10{sup −9} cm/W and the nonlinear refraction coefficient of ∼10{sup −12} cm{sup 2}/W. These results indicate SrBi{sub 4}Ti{sub 4}O{sub 15} thin films are promising candidates for applications in nonlinear optical and optical signal processing devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of N{sup +} ions on bandgap and electrical resistivity of TiN thin films

In the present work, nitrogen ions are embedded into Ti thin films (200 nm) using low energy ion beam implantation (70 keV) by varying ions fluence from 4×10{sup 15} ions/cm{sup 2} to 2×10{sup 16} ions/cm{sup 2}. For this, Ti films were grown using DC magnetron sputtering in Ar environment (power 200 W). TiN films were then characterized using versatile techniques for estimating the band gap and electrical resistivity. X-ray diffraction pattern shows shift in peaks towards higher angle with increase in nitrogen fluence that confirms the introduction of strain in Ti films. UV-Vis spectra show that band gap is reduced from 3.75 eV to 1.7 eV with increase in fluence from 4×10{sup 15} ions/cm{sup 2} to 2×10{sup 16} ions/cm{sup 2}. Furthermore, electrical resistivity also decreases from 2.67×10{sup −4} Ω.cm to 2.31×10{sup −4} Ωcm with nitrogen ion fluence. Based on these results, it can be inferred that ion implantation is an effective approach for uniform distribution of N ions in host matrix and tuning of optical and electrical properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thickness dependent structural, magnetic and magneto-transport properties of epitaxial Nd{sub 0.50}Sr{sub 0.50}MnO{sub 3} thin films

We report the thickness-dependent structural, magnetic and magneto-transport properties in epitaxial Nd{sub 0.50}Sr{sub 0.50}MnO{sub 3} thin films (10 to 300nm) prepared by DC magnetron sputtering technique on single crystalline (001) oriented substrate LaAlO{sub 3}. X-ray diffraction pattern reveals the epitaxial growth of all the films and the out-of-plane lattice parameter of films were found to increase with thickness. As thickness of the film increases the paramagnetic insulator (PMI) to ferromagnetic metal (FMM) transition temperature (T{sub C}), charge ordered transition temperature (T{sub CO}) and magnetic moment were found to increase with a strong bifurcation in ZFC-FC magnetization. The asymmetry in the coercivity seen in field dependent magnetization loops (M-H loops) suggests the presence of exchange bias (EB) effect. While temperature dependent resistivity of films show the semiconducting nature for thickness 10-200nm in temperature range from 5-300K, the film of thickness 300nm shows the insulator to metal transition with transition temperature (T{sub IM}) at 175K. Temperature dependent low field magnetoresistance (LFMR) measured at 4kOe found to decrease with thickness and for high field magnetoresistance (HFMR) at 40kOe and 60kOe also show similar dependence and a crossover at intermediate temperature range in the magnitude of MR between 10nm and 200nm films at constant field. Colossal increase in magnetoresistance observed for 10nm film at low temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of annealing temperature on the structural and optical properties of CeO{sub 2}:Ni thin films

High quality Ni-doped CeO{sub 2} (CeO{sub 2}:Ni) thin films were deposited on glass substrates at room temperature by using radio frequency magnetron sputtering. The effect of annealing temperature on structural and optical properties of the CeO{sub 2}:Ni films was investigated. The structural, optical and vibrational properties of the films were determined using X-ray diffraction (XRD), photoluminescence spectrometer (PL) and Raman spectrometer. It was found that the as-deposited film has a fluorite cubic structure. By increasing annealing temperature from 100°C to 300°C, the crystalline quality of the thin films could be improved. The UV and visible band emissions were observed in the photoluminescence spectra, due to exciton, defect related emissions respectively. The micro-Raman results show the characteristic peak of CeO{sub 2} F{sub 2g} at 465 cm{sup −1} and 2L0 at 1142 cm{sup −1}. Defect peaks like D and 0 bands were observed at 641 cm{sup −1} and 548 cm{sup −1} respectively. It is found from the spectra that the peak intensity of the films increased with increase of annealing temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of sputtering power on structural, mechanical and photoluminescence properties of nanocrystalline SiC thin films

In the present study, SiC thin films were deposited on Si (100) substrate by magnetron sputtering using a 4N purity commercial SiC target in argon atmosphere. The effect of sputtering RF power (140-170W) on structural, mechanical and photoluminescence properties were systematically studied by X-ray diffraction, field emission scanning electron microscopy, Nanoindentation and Spectrophotometer respectively. X-ray diffraction shows polycrystalline 4H-SiC phase with (105) preferred orientation and an enhancement in crystallite size with increasing power was also observed. The decrement in hardness and Young’s modulus with increment in RF power was ascribed to Hall-Petch relation. The maximum hardness and Young’s modulus were found to be 32 GPa and 232 GPa respectively. The photoluminescence spectra show peaks at 384 nm (3.22 eV) which corresponds to bandgap of 4H-SiC (phonon assisted band to band recombination) and 416 nm (2.99 eV) may be attributed to defect states and intensity of both peaks decreases as power increases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Local structure investigation of Co doped ZnO thin films prepared by RF sputtering technique

Co doped ZnO thin films have been prepared using rf magnetron sputtering technique with varying Co doping concentration. GIXRD has been used to probe long range order and Zn, Co and Oxygen K-edge XAFS measurements have been used for investigating local structure around Zn and Co atoms. GIXRD results show wurzite structure of the samples while XANES and EXAFS results at Zn and Co K edge show that Co is going at Zn site in ZnO matrix and no other phase is present. These results are further confirmed by O K edge and Co L{sub 2,3} edge XANES measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

ZrO{sub 2}-ZnO composite thin films for humidity sensing

ZrO{sub 2}-ZnO composite thin films were grown by reactive DC magnetron sputtering. X-ray diffraction studies reveal the composite nature of the films with separate ZnO and ZrO{sub 2} phase. Scanning electron microscopy studies confirm the nanocrystalline structure of the films. The films were studied for their impedometric relative humidity (RH) sensing characteristics. The complex impedance plot was fitted with a standard equivalent circuit consisting of an inter-granular resistance and a capacitance in parallel. The DC resistance was found to be decreasing with increase in RH.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and annealing study of RF sputtered ZnO thin film

In this paper, we have investigated the annealing effect on optical and structural properties of ZnO thin films, synthesized by RF magnetron sputtering. ZnO thin films were deposited on glass and silicon substrates simultaneously at a substrate temperature of 300 °C using Argon gas in sputtering chamber. Thickness of as deposited ZnO thin film was found to be ~155 nm, calculated by Rutherford backscattering spectroscopy (RBS). These films were annealed at 400 °C and 500 °C temperature in the continuous flow of oxygen gas for 1 hour in tube furnace. X-ray diffraction analysis confirmed the formation of hexagonal wurtzite structure of ZnO thin film along the c-axis (002) orientation. Transmittance of thin films was increased with increasing the annealing temperature estimated by UV-visible transmission spectroscopy. Quality and texture of the thin films were improved with annealing temperature, estimated by Raman spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of RF power on structural and magnetic properties of La doped Bi{sub 2}Fe{sub 4}O{sub 9} thin films

Effect of RF power on structural and magnetic properties of lanthanum (La{sup 3+}) doped Bi{sub 2}Fe{sub 4}O{sub 9} thin films grown on p-Si substrates by radio frequency (RF) magnetron sputtering has studied in this investigation. It is observed that the sputtering power affects the crystalline nature and magnetic properties of grown thin films. X-ray diffraction and Raman spectrum confirms that the Bi{sub 2}Fe{sub 4}O{sub 9} (BFO) thin films were crystallized well with orthorhombic structure. The BFO thin films which was prepared at sputtering power of 100 W have good crystallinity than those prepared at 40 W. The magnetic properties are investigated by vibrating sample magnetometer. The magnetic hysteresis perceptive loop shows that the anti-ferromagnetic behavior of the sample at room temperature. These results confirms that the crystallinity and magnetic properties of the BFO thin films were enhanced at the higher sputtering power (100 W).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superconducting properties of Nb-Cu nano-composites and nano-alloys

The evolution of the superconducting transition temperature (T{sub c}) in nano-composite and nano-alloys of Nb-Cu, grown by DC magnetron co-sputtering are investigated. Microstructure of these films depends less strongly on the ratio of Nb:Cu but more on the growth temperature. At higher growth temperature, phase separated granular films of Nb and Cu were formed which showed superconducting transition temperatures (T{sub c}) of ~ 7.2±0.5 K, irrespective of the composition. Our results show that this is primarily influenced by the microstructure of the films determined during growth which rules out the superconducting proximity effect expected in these systems. At room temperature growth, films with nano-scale alloying were obtained at the optimal compositional range of 45-70 atomic% (At%) of Nb. These were also superconducting with a T{sub c} of 3.2 K.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The effect of millisecond flash lamp annealing on electrical and structural properties of ZnO:Al/Si structures

The effect of millisecond flash lamp annealing (FLA) on aluminum doped ZnO (AZO) films and their interface with Si have been studied. The AZO films were deposited by magnetron sputtering on Si (100) substrates. The electrical and structural properties of the film and AZO/Si structures were characterized by current–voltage, capacitance–voltage, and deep level transient spectroscopy measurements, X-ray diffraction, and secondary ion mass spectrometry. The resistivity of the AZO film is reduced to a close to state-of-the-art value of 2 × 10{sup −4} Ω cm after FLA for 3 ms with an average energy density of 29 J/cm{sup 2}. In addition, most of the interfacial defects energy levels are simultaneously annealed out, except for one persisting shallow level, tentatively assigned to the vacancy-oxygen complex in Si, which was not affected by FLA. Subsequent to the FLA, the samples were treated in N{sub 2} or forming gas (FG) (N{sub 2}/H{sub 2}, 90/10%{sub mole}) ambient at 200–500 °C. The latter samples maintained the low resistivity achieved after the FLA, but not the former ones. The interfacial defect level persisting after the FLA is removed by the FG treatment, concurrently as another level emerges at ∼0.18 eV below the conduction band. The electrical data of the AZO films are discussed in term of point defects controlling the resistivity, and it is argued that the FLA promotes formation of electrically neutral clusters of Zink vacancies (V{sub Zn}'s) rather than passivating/compensating complexes between the Al donors and V{sub Zn}'s.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Charge storage and tunneling mechanism of Ni nanocrystals embedded HfO{sub x} film

A nano-floating gate memory structure based on Ni nanocrystals (NCs) embedded HfO{sub x} film is deposited by means of radio-frequency magnetron sputtering. Microstructure investigations reveal that self-organized Ni-NCs with diameters of 4-8 nm are well dispersed in amorphous HfO{sub x} matrix. Pt/Ni-NCs embedded HfO{sub x}/Si/Ag capacitor structures exhibit voltage-dependent capacitance-voltage hysteresis, and a maximum flat-band voltage shift of 1.5 V, corresponding to a charge storage density of 6.0 × 10{sup 12} electrons/cm{sup 2}, is achieved. These capacitor memory cells exhibit good endurance characteristic up to 4 × 10{sup 4} cycles and excellent retention performance of 10{sup 5} s, fulfilling the requirements of next generation non-volatile memory devices. Schottky tunneling is proven to be responsible for electrons tunneling in these capacitors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Insights on semiconductor-metal transition in indium-doped zinc oxide from x-ray photoelectron spectroscopy, time-of-flight secondary ion mass spectrometry and x-ray diffraction

ZnO thin films doped with various amounts of In impurities were prepared by magnetron sputtering at a substrate temperature of 150°C. The shift in optical bandgap of the In-doped ZnO films is studied as a function of carrier concentration. Nominally doped ZnO films exhibit an increase in the measured optical band gap known as the Burstein-Moss effect. Dominant band gap narrowing is observed with increased doping. XPS and TOFSIMS analyses confirm that In is incorporated in the ZnO material. The In 3d peaks show that no metallic In is present as a result of heavy doping. The XRD phase analysis shows a preferential c-axis growth but a shift of the ZnO (002) peak to lower 2-theta values with increasing FWHM as the carrier concentration increases indicates the decline in the quality of crystallinity. An elongation of the c lattice constant is also observed and is likely to be caused by intersitital In as the amount of In dopants increases. The incorporation of In induces a semiconductor-metal transition between the carrier concentrations of 3.58 – 5.61×10{sup 19} cm{sup −3} and structural changes in the ZnO host material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultra-precision fabrication of 500 mm long and laterally graded Ru/C multilayer mirrors for X-ray light sources

X-ray mirrors are needed for beam shaping and monochromatization at advanced research light sources, for instance, free-electron lasers and synchrotron sources. Such mirrors consist of a substrate and a coating. The shape accuracy of the substrate and the layer precision of the coating are the crucial parameters that determine the beam properties required for various applications. In principal, the selection of the layer materials determines the mirror reflectivity. A single layer mirror offers high reflectivity in the range of total external reflection, whereas the reflectivity is reduced considerably above the critical angle. A periodic multilayer can enhance the reflectivity at higher angles due to Bragg reflection. Here, the selection of a suitable combination of layer materials is essential to achieve a high flux at distinct photon energies, which is often required for applications such as microtomography, diffraction, or protein crystallography. This contribution presents the current development of a Ru/C multilayer mirror prepared by magnetron sputtering with a sputtering facility that was designed in-house at the Helmholtz-Zentrum Geesthacht. The deposition conditions were optimized in order to achieve ultra-high precision and high flux in future mirrors. Input for the improved deposition parameters came from investigations by transmission electron microscopy. The X-ray optical properties were investigated by means of X-ray reflectometry using Cu- and Mo-radiation. The change of the multilayer d-spacing over the mirror dimensions and the variation of the Bragg angles were determined. The results demonstrate the ability to precisely control the variation in thickness over the whole mirror length of 500 mm thus achieving picometer-precision in the meter-range.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The radiofrequency magnetic dipole discharge

This paper describes a novel and simple concept of plasma source, which is able to produce a radiofrequency magnetized discharge with minimal power requirements. The source is based on the magnetron concept and uses a permanent magnet as an active electrode. The dipolar field produced by the magnet confines the electrons, which cause further ionization, thus producing a toroidally shaped plasma in the equatorial region around the electrode. A plasma can be ignited with such scheme with power levels as low as 5 W. Paschen curves have been built for four different working gases, showing that in Helium or Neon, plasma breakdown is easily obtained also at atmospheric pressure. The plasma properties have been measured using a balanced Langmuir probe, showing that the electron temperature is around 3–4 eV and higher in the cathode proximity. Plasma densities of the order of 10{sup 16 }m{sup −3} have been obtained, with a good positive scaling with applied power. Overall, the electron pressure appears to be strongly correlated with the magnetic field magnitude in the measurement point.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fabrication of Ohmic contact on semi-insulating 4H-SiC substrate by laser thermal annealing

The Ni contact layer was deposited on semi-insulating 4H-SiC substrate by magnetron sputtering. The as-deposited samples were treated by rapid thermal annealing (RTA) and KrF excimer laser thermal annealing (LTA), respectively. The RTA annealed sample is rectifying while the LTA sample is Ohmic. The specific contact resistance (ρ{sub c}) is 1.97 × 10{sup −3} Ω·cm{sup 2}, which was determined by the circular transmission line model. High resolution transmission electron microscopy morphologies and selected area electron diffraction patterns demonstrate that the 3C-SiC transition zone is formed in the near-interface region of the SiC after the as-deposited sample is treated by LTA, which is responsible for the Ohmic contact formation in the semi-insulating 4H-SiC.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗