Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Abnormal Transport and Magnetic Properties Induced by Change of the Phase Volume Ratio for YBa{sub 2}Cu{sub 3}O{sub 7-δ}/La{sub 0.67}Sr{sub 0.33}MnO{sub 3} Hybrids

Two elaborately designed hybrids consisting of superconducting YBa{sub 2}Cu{sub 3}O{sub 7-δ} (YBCO) and ferromagnetic La{sub 0.67}Sr{sub 0.33}MnO{sub 3} (LSMO), namely 20 × (YBCO(m)/LSMO(100 − m)) are prepared on single crystal SrTiO{sub 3} (STO) by pulsed laser deposition (PLD) with 20 being repetition periods and m = 90 and 10, respectively, which represents YBCO pulse number in a period. The films show highly c-oriented and epitaxial quality, suggested by XRD 𝜃–2𝜃 scans and pole figures. The 20 × (YBCO90/LSMO10) sample with a large YBCO volume fraction exhibits the typical character of a metal superconductor at about 90 K, while its transition width reaches 9.1 K, which is nearly eight times of that of the pure YBCO film. Above the superconducting transition temperature, a superparamagnetic signal rather than ferromagnetic behavior is observed, which may be associated with a diluted system consisting of the ferromagnetic nanoparticles embedded in the superconducting films. For the hybrid with a small YBCO volume fraction, i.e., the 20 × (YBCO10/LSMO90) sample, its transport behavior at normal state is insulating, and it is found that the Mott variable range hopping conduction dominates in this insulating phase in the temperature range 70–310 K. Obviously distinguishable insulator to superconductor (IS) transition occurs at 52 K, but the superconducting diamagnetic signals are very weak in the magnetic measurements below the IS temperature. For this sample, the magnetization loop at 100 K is ferromagnetic, yet manifested by a reduced coercive field and residual magnetization as compared with a pure LSMO film. In fact, both hybrids represent two kinds of nanocomposites, i.e., superconducting nanoparticles in a ferromagnetic matrix and ferromagnetic nanoparticles in a superconducting matrix, which benefits to study interfacial interactions due to an increased interface to value ratio and reduced size effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two halide-containing cesium manganese vanadates: synthesis, characterization, and magnetic properties

In this study, two new halide-containing cesium manganese vanadates have been synthesized by a high-temperature (580 °C) hydrothermal synthetic method from aqueous brine solutions. One compound, Cs 3 Mn(VO 3 ) 4 Cl, (1) was prepared using a mixed cesium hydroxide/chloride mineralizer, and crystallizes in the polar noncentrosymmetric space group Cmm2, with a = 16.7820(8) Å, b = 8.4765(4) Å, c = 5.7867(3) Å. This structure is built from sinusoidal zig-zag (VO 3 ) n chains that run along the b-axis and are coordinated to Mn 2+ containing (MnO 4 Cl) square-pyramidal units that are linked together to form layers. The cesium cations reside between the layers, but also coordinate to the chloride ion, forming a cesium chloride chain that also propagates along the b-axis. The other compound, Cs 2 Mn(VO 3 ) 3 F, (2) crystallizes in space group Pbca with a = 7.4286(2) Å, b = 15.0175(5) Å, c = 19.6957(7) Å, and was prepared using a cesium fluoride mineralizer. The structure is comprised of corner sharing octahedral Mn 2+ chains, with trans fluoride ligands acting as bridging units, whose ends are capped by (VO 3 ) n vanadate chains to form slabs. The cesium atoms reside between the manganese vanadate layers, and also play an integral part in the structure, forming a cesium fluoride chain that runs along the b-axis. Both compounds were characterized by single-crystal X-ray diffraction, powder X-ray diffraction, and single-crystal Raman spectroscopy. Additionally, the magnetic properties of 2 were investigated. Lastly, above 50 K, it displays behavior typical of a low dimensional system with antiferromagnetic interactions, as to be expected for linear chains of manganese(II) within the crystal structure.

36 MATERIALS SCIENCE↗

Crystal structures and magnetic properties of strontium and copper doped lanthanum ferrites

The crystal and magnetic structures of La{sub 0.8}Sr{sub 0.2}Fe{sub 1-x}Cu{sub x}O{sub 3-w} compounds, which exhibit coercive fields larger than any others reported for iron-based perovskites, have been analyzed at room temperature with the neutron powder diffraction technique and the Rietveld method of profile fitting. For x in the range 0.05-0.10 the material is monophasic with orthorhombic symmetry (space group Pnma), and crystallizes in the perovskite-like cell of LaFeO{sub 3}, Fe/Cu cations occupy octahedral sites, La/Sr cations are twelve-fold coordinated. For x=0.20 the material is biphasic, with a main orthorhombic phase (space group Pnma) and a secondary rhombohedral phase with space group R-3c (hexagonal setting). The structural transition from the orthorhombic to the rhombohedral phase reduces the structural distortion of the (Fe/Cu)O{sub 6} octahedron. The average bond distance (Fe/Cu)-O and the pseudo-cubic unit cell volume decrease with increasing Cu content in accordance with the presence of higher valence states of the transition metals. The magnetic structure was modeled for the monophasic samples (x=0.05 and 0.10) assuming an antiferromagnetic interaction between Fe/Cu neighboring cations (G-type): the magnetic moments order antiferromagnetically along the b-axis, with the spin direction along a-axis. The magnetic moments of the Fe/Cu atoms are {mu}{sub x}=2.66(3){mu}{sub B} and 2.43(3){mu}{sub B} for the compositions x=0.05 and 0.10, respectively. By measuring the first magnetization curve and the hysteresis loops, coexisting antiferromagnetic and weak ferromagnetic interactions were observed for all samples. - Graphical abstract: Hysteresis loops measured at room temperature of the sample with x=0.05. Highlights: Black-Right-Pointing-Pointer Iron based perovskites with the largest coercive fields. Black-Right-Pointing-Pointer Sr and Cu lanthanum ferrites as magnetic materials. Black-Right-Pointing-Pointer Doped lanthanum ferrites show antiferromagnetic and weak ferromagnetic interactions. Black-Right-Pointing-Pointer Sr and Cu lanthanum ferrites show distorted perovkite structure.

36 MATERIALS SCIENCE↗

Effect of swift Li{sup 3+} ions irradiation on magnetic properties of Ce(Fe{sub 0.95}Si{sub 0.05}){sub 2}

Magnetic field induced Anti-ferromagnetic (AFM) to ferromagnetic (FM) phase transition on a sample of Ce(Fe{sub 0.95}Si{sub 0.05}){sub 2} is studied before and after swift Li{sup 3+} ions irradiation. Presence of irradiation induced material defects caused the AFM-FM transition to move to lower fields, increased the zero field magnetic susceptibility in AFM region and decreased the logarithmic relaxation rate in the hysteretic transition region.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, electrical and magnetic properties of Bi{sub 0.825}Pb{sub 0.175}FeO{sub 3}, and Bi{sub 0.725}La{sub 0.1}Pb{sub 0.175}FeO{sub 3} multiferroics

Graphical abstract: - Highlights: • Samples synthesized by solid state reaction route successfully. • La and Pb substitutions significantly change the BiFeO{sub 3} crystal symmetry. • The presence of E(TO9) and E(LO9) modes indicates ferroelectric domain of BiFeO{sub 3}. • Doped ions and crystal structure affect the dielectric properties of the samples. • The observed value of conductivity for BPFO sample is 3.1 × 10{sup −9} σ{sup −1} cm{sup −1}. - Abstract: Single-phase BiFeO{sub 3}, Bi{sub 0.825}Pb{sub 0.175}FeO{sub 3} and Bi{sub 0.725}La{sub 0.1}Pb{sub 0.175}FeO{sub 3} ceramic samples were prepared via solid state reaction route to study the effects of co-doping (La/Pb) on their crystal structure and ferroelectromagnetic behaviour. X-ray diffraction data accompanied by Rietveld refinement showed that BiFeO{sub 3} crystallize in rhombohedral distorted perovskite structure (space group-R3c) while to that BPFO and BLPFO crystallize in tetragonal (P4/mmm) symmetry. Presence of E(TO9) and E(LO9) modes in Raman scattering spectra for BiFeO{sub 3} and Bi{sub 0.725}La{sub 0.1}Pb{sub 0.175}FeO{sub 3} infers ferroelectric nature. However, absence of both modes in Bi{sub 0.875}Pb{sub 0.175}FeO{sub 3} indicates the paraelectric nature. The room temperature dielectric constant (10 Hz–1 MHz) of BiFeO{sub 3}, Bi{sub 0.825}Pb{sub 0.175}FeO{sub 3} and Bi{sub 0.725}La{sub 0.1}Pb{sub 0.175}FeO{sub 3} is about 100, 60, and 200. Ferroelectromagnetic measurements revealed the existence of ferroelectricity with remnant polarization of 0.24 μC/cm{sup 2} in Bi{sub 0.725}La{sub 0.1}Pb{sub 0.175}FeO{sub 3}, paraelectricity in Bi{sub 0.875}Pb{sub 0.175}FeO{sub 3}, and weak (strong) ferromagnetism with remnant magnetizations of 0.25 (1.57) emu/g in Bi{sub 0.725}La{sub 0.1}Pb{sub 0.175}FeO{sub 3} (Bi{sub 0.825}Pb{sub 0.175}FeO{sub 3})

36 MATERIALS SCIENCE↗

Effect of (Sr{sub 0.7}Ca{sub 0.3})TiO{sub 3}-substitution on structure, dielectric, ferroelectric, and magnetic properties of BiFeO{sub 3} ceramics

Bi{sub 1−x}(Sr{sub 0.7}Ca{sub 0.3}){sub x}Fe{sub 1−x}Ti{sub x}O{sub 3} ceramics were prepared by a standard solid state reaction process, and the influence of Sr/Ca ratio on structure and properties for Bi{sub 1−x}(Sr,Ca){sub x}Fe{sub 1−x}Ti{sub x}O{sub 3} system was discussed by comparing with Sr{sub 0.5}Ca{sub 0.5}TiO{sub 3}-modified BiFeO{sub 3} ceramics. Rietveld analysis of X-ray diffraction data revealed that the crystal structure changed from rhombohedral R3c (x ≤ 0.4) to orthorhombic Pnma (x = 0.6) with Sr{sub 0.7}Ca{sub 0.3}TiO{sub 3} substitution, and biphasic structure (R3c + Pnma) was determined at x = 0.5, while that for Bi{sub 1−x}(Sr{sub 0.5}Ca{sub 0.5}){sub x}Fe{sub 1−x}Ti{sub x}O{sub 3} system was at x = 0.4. This indicated that the morphotropic phase boundary in Bi{sub 1−x}(Sr,Ca){sub x}Fe{sub 1−x}Ti{sub x}O{sub 3} system shifted toward (Sr,Ca)TiO{sub 3} side with increasing Sr/Ca ratio. The Raman spectrometric analysis and selected area electron diffraction analysis also confirmed this transition. The dielectric relaxation could be well fitted by Arrhenius law, and the different activation energies were attributed to the different origins of the dielectric relaxations with increasing temperature. The current density-field (J-E) curves indicated that the leakage current was reduced to about five orders of magnitude with Sr{sub 0.7}Ca{sub 0.3}TiO{sub 3} substitution. The P-E hysteresis loops obtained by three different methods indicated the enhanced ferroelectricity at x = 0.4, and it could be attributed to the decrement of leakage current. Meanwhile, the magnetization was enhanced with Sr{sub 0.7}Ca{sub 0.3}TiO{sub 3} substitution, and the maximum remanent magnetization was determined at x = 0.2. The enhanced magnetization originated from the partial substitution of Fe{sup 3+} by Ti{sup 4+}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of Electrical Transport and Magnetic Properties of Nd{sub 0.7}Sr{sub 0.3}MnO{sub 3}/Nd{sub 0.8}Na{sub 0.2}MnO{sub 3} Bilayer Thin Films

Bilayer films of Nd{sub 0.7}Sr{sub 0.3}MnO{sub 3}/Nd{sub 0.8}Na{sub 0.2} MnO{sub 3} were grown on 001-orientated LaAlO{sub 3} substrate by using RF magnetron sputtering. The thickness of the Nd{sub 0.8}Na{sub 0.2}MnO{sub 3} (NNMO) film was kept fixed at 120 nm while that of the Nd{sub 0.7}Sr{sub 0.3}MnO{sub 3} (NSMO) film was varied from 12 to 100 nm. X-ray diffraction patterns confirm the growth of films along the (001) direction, and the out-of-plane lattice constant of the NSMO film decreases with an increase in film thickness. The bilayer films are found to undergo out-of-plane tensile strain, and the lattice strain is found to decrease with an increase in film thickness. The ferromagnetic transition temperature is found to increase with an increase in the NSMO film thickness. M–H loops recorded at 50 K show a systematic increase in saturation magnetisation with an increase in film thickness. Metal–insulator transition has been observed for the film thickness of 30 nm and above, and the transition temperature is found to increase with an increase in film thickness. The electrical resistivity data in the metallic region were explained based on electron–electron and electron–magnon scattering mechanism by including a weak localisation effect at low temperature. The electrical resistivity data in the insulating region follow the Mott-variable range hopping model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modification of the structural and magnetic properties of granular FePt films by seed layer conditioning

The steadily increasing amount of digital information necessitates the availability of reliable high capacity magnetic data storage. Here, future hard disk drives with extended areal storage densities beyond 1.0 Tb/in{sup 2} are envisioned by using high anisotropy granular and chemically L1{sub 0}-ordered FePt (002) perpendicular media within a heat-assisted magnetic recording scheme. Perpendicular texturing of the [001] easy axes of the individual grains can be achieved by using MgO seed layers. It is therefore investigated, if and how an Ar{sup +} ion irradiation of the MgO seed layer prior to the deposition of the magnetic material influences the MgO surface properties and hereby the FePt [001] texture. Structural investigations reveal a flattening of the seed layer surface accompanied by a change in the morphology of the FePt grains. Moreover, the fraction of small second layer particles and the degree of coalescence of the primarily deposited FePt grains strongly increases. As for the magnetic performance, this results in a reduced coercivity along the magnetic easy axis (out of plane) and in enhanced hard axis (in-plane) remanence values. The irradiation induced changes in the magnetic properties of the granular FePt-C films are traced back to the accordingly modified atomic structure of the FePt-MgO interface region.

36 MATERIALS SCIENCE↗

Quantum Magnetic Properties and Metal‐to‐Insulator Transition in Chemically Doped Calcium Ruthenate Perovskite

Ruthenates provide a comprehensive platform to study a plethora of novel properties, such as quantum magnetism, superconductivity, and magnetic fluctuation mediated metal–insulator transition (MIT). Herein, an overview of quantum mechanical phenomenology in calcium ruthenium oxide with varying compositions is provided. While the stoichiometric composition of exhibits non‐fermi liquid (FL) behavior with quasi‐criticality, chemically doped compounds depict prominent signatures of quantum magnetic fluctuations at low temperature that in some cases are argued to mediate in metal–insulator transition. In the case of cobalt‐doped , an unusual continuum fluctuation is found to persist deep inside the glassy phase of the material. These observations reflect the richness of the ruthenate research platform in the study of quantum magnetic phenomena of fundamental importance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic properties of Lu and Y doped Ce-Fe-B magnets

The growing demand for Nd2Fe14B magnets is exacerbating the current critical materials shortage. To reduce the amount of critical material in Nd2Fe14B magnets, chemical substitutions have been used and shown to improve the magnetic behavior, such as the Curie Temperature TC, anisotropy field Ha, and saturation magnetization MS.

Bretana, Alex↗

Stability, Electronic and Magnetic Properties of Rare Earth (Eu, Tm) Implanted InGaN

The electronic structure and magnetic behavior of InGaN:RE (RE = Eu, Tm) have been studied by using scalar relativistic full-potential linear augmented-plane-wave plus local orbital (FPLAPW + lo) calculations with LSDA+U approximation. Band structure and density of states are analyzed. It appears that the In-site is the preferred site for doping InGaN alloy with rares earth (Eu, Tm) from the formation energy. Our study reveals that these materials are semiconductors with a direct band gap of 1.2345 eV and 1.3657 eV for InGaN:Eu and InGaN:Tm respectively. The total energy of the FM phase is lower than the AFM total energy; this confirms the fact that the ground state at zero temperature is ferromagnetic. A small-induced magnetic moment on other nonmagnetic atoms (Ga, In, and N) and the total magnetic moment of these compounds is mainly due to RE-4f states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Double transition metal MXenes with wide band gaps and novel magnetic properties

Novel wide band gaps and magnetism in ordered titanium–vanadium, titanium–chromium, and titanium–manganese carbide and nitride based MXenes are predicted using density functional theory. Based on the recent synthesis of Ti centred double transition metal MXenes, we study MXenes with a central Ti layer and different surface early 3d metals, and various terminations, TiM 2 X 2 T (M = V, Cr, Mn; X = C, N; T = H, F, O, OH). While previously studied MXenes are strongly metallic, we predict surface metal and termination dependent metal–insulator transitions in the Cr–N and Mn–N series. A uniquely wide band gap over 1 eV is predicted for TiMn 2 N 2 F 2 using the HSE06 density functional while the unterminated TiMn 2 N 2 remains metallic. The entire TiCr 2 C 2 T series is predicted to be semiconducting. Distinct from the more common Ti–C MXenes, not all combinations of metals and terminations are predicted to be stable. Within the examined sets of materials, anti-ferromagnetic orders are generally most favorable. In conclusion, the new MXenes further extend the range of properties accessible in this family of two-dimensional nanomaterials.

36 MATERIALS SCIENCE↗

Amorphous FeCoSiB for exchange bias coupled and decoupled magnetoelectric multilayer systems: Real-structure and magnetic properties

The effect of field annealing for exchanged biased multilayer films is studied with respect to the resultant structural and magnetic film properties. The presented multilayer stacks comprise repeating sequences of Ta/Cu/(1 1 1) textured antiferromagnetic Mn₇₀Ir₃₀ /amorphous ferromagnetic Fe₇₀.₂Co₇.₈Si₂B₁₀. Within the ferromagnetic layers crystalline filaments are observed. An additional Ta layer between the antiferromagnet and ferromagnet is used in order to investigate and separate the influence of the common Mn₇₀Ir₃₀/Fe₇₀.₂Co₇.₈Si₁₂B₁₀ interface on the occurring filaments and structural changes. In situ and ex situ transmission electron microscopy is used for a comprehensive structure characterization of multilayer stacks for selected temperature stages. Up to 250 °C, the multilayers are structurally unaltered and preserve the as-deposited condition. A deliberate increase to 350 °C exhibits different crystallization processes for the films, depending on the presence of crystal nuclei within the amorphous ferromagnetic layer. The influence of volume-to-surface ratio of the multilayer stacks to the crystallization process is emphasized by the comparison of in situ and ex situ investigations as the respective specimen thickness is changed. Complementary magnetic studies reveal a defined exchange bias obtained at the first annealing step and a decrease of total anisotropy field with partial crystallization after the subsequent annealing at 350 °C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A study of the influence of crystallite size on the electrical and magnetic properties of CuFe{sub 2}O{sub 4}

Graphical abstract: A plot of crystallite size against the normalized values of resistivity, dielectric constant and the drift mobility of the CuFe{sub 2}O{sub 4} materials. Highlights: {yields} The CuFe{sub 2}O{sub 4} materials of different crystallite sizes of <100 nm are prepared by sol-gel method and others of the size of >100 nm by combustion method. {yields} The synthesized samples are characterized for different electrical, dielectrical, magnetic and structural properties. {yields} The results show a sudden change in dc-electrical resistivity, Curie temperature, dielectric parameters, etc. when their crystallite size approaches 84 nm. {yields} This study shows transition from bulk to the nano regime takes place at the particle size of 84 nm. -- Abstract: An attempt has been made to clarify the fundamental assumption that the properties of materials change as the crystallite size of the material is reduced below 100 nm. CuFe{sub 2}O{sub 4} samples of different crystallite sizes were prepared by the sol-gel and combustion methods and then analyzed by X-ray diffraction (XRD), thermal analyses (TGA/DTG) and scanning electron microscopy (SEM) techniques. The magnetic properties were studied by measuring the AC magnetic susceptibility ({chi}) and the Moessbauer spectroscopy. The DC electrical resistivity, dielectric constant, dielectric loss tangent, Curie temperature and hyperfine splitting of the samples change with the crystallite size. The change in the electrical properties is attributed to the formation of discrete energy levels instead of the bands. However, the magnetic parameters change due to the existence of non magnetic surface layers. The isomer shift and the hyperfine splitting show gradual increase with the increase in crystallite sizes.

36 MATERIALS SCIENCE↗

Two-dimensional lateral GaN/SiC heterostructures: First-principles studies of electronic and magnetic properties

We study the electronic and magnetic structures of quasi-one-dimensional interfaces along the zigzag direction in two-dimensional GaN/SiC heterostructures using first-principles calculations. Four representative heterostructures with six inequivalent interfaces are discussed in detail. Our results indicate that a bulk electric field will develop only when both interfaces feature no gap states and the total net charge at interfaces are of opposite sign. All the geometries studied exhibit an intriguing quasi-one-dimensional conductor character, of which three show finite nonzero magnetic moment. Furthermore, the magnetic moment in one of the systems can be tuned by applying an electric field along the normal direction of monolayer indicating a strong magnetoelectric coupling. Our analysis shows that the magnetization at the interfaces is closely related to the density of states at the Fermi level due to the Stoner instability, and the ribbon-width-dependent magnetization for different geometries implies the existence of an in-bulk electric field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure and magnetic properties of RuFe{sub 3}N nitride

Self-consistent band structure calculations were performed on nitride RuFe{sub 3}N in order to investigate its magnetic and ground state properties. The Linear Muffin-Tin Orbital (LMTO) method was employed and calculations were performed at several lattice parameters so as to obtain the RuFe{sub 3}N equilibrium volume. Nonmagnetic and ferromagnetic LMTO calculations have shown that the RuFe{sub 3}N stable stage is ferromagnetic with constant lattice equilibrium of 7.2502 atomic units (a.u.). At equilibrium volume the LMTO calculations have given magnetic moments of 1.25 and 1.63 mu{sub B} at Ru and Fe sites, respectively, and no magnetic moment at N sites. The analysis of states density at equilibrium volume as well as the results for charge transfer illustrates why this ruthenium nitride is ferromagnetic. The LMTO calculations anticipate that the magnetic moment, the hyperfine field (the Fermi contact) and the isomer shift show a strong dependence on the lattice spacing. - Graphical Abstract: Total energy curves, versus lattice spacing for the RuFe{sub 3}N nitride. It is observed an energy difference between ferromagnetic and paramagnetic states, which provides high critic pressure.

36 MATERIALS SCIENCE↗