Processing and transmission of information
Effects of noise in picture processing & coding color pictures, sequential decoding facility, and error bound for fixed-time continuous channels
CHANNEL↗
SEARCH · Engineering Papers
Results for “M CODES”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Codes for multiplex spectrometry
Binary cyclic coding schemes for multiplex spectrometry in terms of linear least mean square unbiased estimate
Fine, T.↗
Improved neutron activation code system development, phase A
Computer codes for calculating radiation environments in predicting neutron activation
Gordon, J. D.↗
Implementation of radiation shielding calculation methods. Volume 1: Synopsis of methods and summary of results
The work performed in the following areas is summarized: (1) Analysis of Realistic nuclear-propelled vehicle was analyzed using the Marshall Space Flight Center computer code package. This code package includes one and two dimensional discrete ordinate transport, point kernel, and single scatter techniques, as well as cross section preparation and data processing codes, (2) Techniques were developed to improve the automated data transfer in the coupled computation method of the computer code package and improve the utilization of this code package on the Univac-1108 computer system. (3) The MSFC master data libraries were updated.
Capo, M. A.↗
HP-9825A HFRMP trajectory processor (#TRAJ), detailed description
The computer code for the trajectory processor (#TRAJ) of the high fidelity relative motion program is described. The #TRAJ processor is a 12-degrees-of-freedom trajectory integrator (6 degrees of freedom for each of two vehicles) which can be used to generate digital and graphical data describing the relative motion of the Space Shuttle Orbiter and a free-flying cylindrical payload. A listing of the code, coding standards and conventions, detailed flow charts, and discussions of the computational logic are included.
Kindall, S. M.↗
Efficient computation of the stability of three-dimensional compressible boundary layers
Methods for the computer analysis of the stability of three-dimensional compressible boundary layers are discussed and the user-oriented Compressible Stability Analysis (COSAL) computer code is described. The COSAL code uses a matrix finite-difference method for local eigenvalue solution when a good guess for the eigenvalue is available and is significantly more computationally efficient than the commonly used initial-value approach. The local eigenvalue search procedure also results in eigenfunctions and, at little extra work, group velocities. A globally convergent eigenvalue procedure is also developed which may be used when no guess for the eigenvalue is available. The global problem is formulated in such a way that no unstable spurious modes appear so that the method is suitable for use in a black-box stability code. Sample stability calculations are presented for the boundary layer profiles of an LFC swept wing.
Malik, M. R.↗
The processing of IMU data in ENTREE implementation and preliminary results
It is demonstrated that the shuttle entry trajectory can be accurately represented in ENTREE with IMU data available postflight. The IMU data consist of platform to body quaternions, and accumulated sensed velocities in mean of fifty (M50) coordinates approximately every second. The preprocessing software required to incorporate the IMU data in ENTREE is described as well as the relatively minor code changes to the ENTREE program itself required to process the IMU data. Code changes to the ENTREE program and input tape data format and content changes are described.
Heck, M. L.↗
PASCO: Structural panel analysis and sizing code, capability and analytical foundations
A computer code denoted PASCO which can be used for analyzing and sizing uniaxially-stiffened composite panels is described. Buckling and vibration analyses are carried out with a linked-plate analysis computer code denoted VIPASA, which is incorporated in PASCO. Sizing is based on nonlinear mathematical programming techniques and employs a computer code denoted CONMIN, also incorporated in PASCO. Design requirements considered are initial buckling, material strength, stiffness, and vibration frequency. The capability of the PASCO computer code and the approach used in the structural analysis and sizing are described.
Stroud, W. J.↗
Results of a flight experiment on the catalytic efficiency of the Space Shuttle heat shield
An experiment was performed on the second Space Shuttle flight to verify data from arc-heated wind-tunnel tests indicating that the thermal protection tiles used on the Shuttle's surface are noncatalytic to the recombination of dissociated air. The experiment indicates that the tiles are indeed noncatalytic, and explains the lower than expected temperatures observed in the first two Shuttle flights. The data are reasonably well predicted with computations, using a chemically reactive boundary-layer code. The experimental setup and the computational analysis are described.
Rakich, J. V.↗
Analytical modeling of operating characteristics of premixing-prevaporizing fuel-air mixing passages. Volume 2: User's manual
A user's manual describing the operation of three computer codes (ADD code, PTRAK code, and VAPDIF code) is presented. The general features of the computer codes, the input/output formats, run streams, and sample input cases are described.
Anderson, O. L.↗
Fabrication and evaluation of cold/formed/weldbrazed beta-titanium skin-stiffened compression panels
The room temperature and elevated temperature buckling behavior of cold formed beta titanium hat shaped stiffeners joined by weld brazing to alpha-beta titanium skins was determined. A preliminary set of single stiffener compression panels were used to develop a data base for material and panel properties. These panels were tested at room temperature and 316 C (600 F). A final set of multistiffener compression panels were fabricated for room temperature tests by the process developed in making the single stiffener panels. The overall geometrical dimensions for the multistiffener panels were determined by the structural sizing computer code PASCO. The data presented from the panel tests include load shortening curves, local buckling strengths, and failure loads. Experimental buckling loads are compared with the buckling loads predicted by the PASCO code. Material property data obtained from tests of ASTM standard dogbone specimens are also presented.
Royster, D. M.↗
Body-freedom flutter of a 1/2-scale forward-swept-wing model, an experimental and analytical study
The aeroelastic phenomenon known as body-freedom flutter (BFF), a dynamic instability involving aircraft-pitch and wing-bending motions which, though rarely experienced on conventional vehicles, is characteristic of forward swept wing (FSW) aircraft was investigated. Testing was conducted in the Langley transonic dynamics tunnel on a flying, cable-mounted, 1/2-scale model of a FSW configuration with and without relaxed static stability (RSS). The BFF instability boundaries were found to occur at significantly lower airspeeds than those associated with aeroelastic wing divergence on the same model. For those cases with RSS, a canard-based stability augmentation system (SAS) was incorporated in the model. This SAS was designed using aerodynamic data measured during a preliminary tunnel test in which the model was attached to a force balance. Data from the subsequent flutter test indicated that BFF speed was not dependent on open-loop static margin but, rather, on the equivalent closed-loop dynamics provided by the SAS. Servo-aeroelastic stability analyses of the flying model were performed using a computer code known as SEAL and predicted the onset of BFF reasonably well.
Chipman, R.↗
Standard methods for telemetry and telecommand channel coding
Recommendations being developed by the NASA-ESA Working Group (NEWG) for Space Data Systems Standardization and the Consultative Committee for Space Data Systems (CCSDS) to standardize spacecraft telemetry and command coding are characterized. The telemetry convolutional codes used by JPL, ESA, and GSFC are found to be similar but incompatible, and it is recommended that a secondary capability for the other two schemes be developed at each facility, with the GSFC scheme as the ultimate standard, a periodic convolutional interleaving procedure for use with the NASA Tracking and Data Relay Satellite, and an optional concatenation of the convolutional code with a Reed-Solomon code to achieve up to 6.8 dB of gain. The telecommand-coding approach adopted by CCSDS is based on the schemes in use at JPL and GSFC.
Macmedan, M. L.↗
Computation of turbulent flows on rotating bodies and ducts
A K-epsilon model for three-dimensional boundary layers modified to include anisotropy and one modified for rotating flows are described. Based on these models, the predictions of a space-marching code show good agreement with the flow data for a rotating cylinder and a rotating channel.
Pougare, M.↗
Implementation and validation of a wake model for low-speed forward flight
The computer implementation and calculations of the induced velocities produced by a wake model consisting of a trailing vortex system defined from a prescribed time averaged downwash distribution are detailed. Induced velocities are computed by approximating each spiral turn by a pair of large straight vortex segments positioned at critical points relative to where the induced velocity is required. A remainder term for the rest of the spiral is added. This approach results in decreased computation time compared to classical models where each spiral turn is broken down in small straight vortex segments. The model includes features such a harmonic variation of circulation, downwash outside of the blade and/or outside the tip path plane, blade bound vorticity induced velocity with harmonic variation of circulation and time averaging. The influence of various options and parameters on the results are investigated and results are compared to experimental field measurements with which, a resonable agreement is obtained. The capabilities of the model as well as its extension possibilities are studied. The performance of the model in predicting the recently-acquired NASA Langley Inflow data base for a four-bladed rotor is compared to that of the Scully Free Wake code, a well-established program which requires much greater computational resources. It is found that the two codes predict the experimental data with essentially the same accuracy, and show the same trends.
Komerath, Narayanan M.↗
Convergence acceleration of viscous and inviscid hypersonic flow calculations
The convergence of inviscid and viscous hypersonic flow calculations using a two-dimensional flux-splitting code is accelerated by applying a Richardson-type overrelaxation method. Successful results are presented for various cases; and a 50 percent savings in computer time is usually achieved. An analytical formula for the overrelaxation factor is derived, and the performance of this scheme is confirmed numerically. Moreover, application of this overrelaxation scheme produces a favorable preconditioning for Wynn's epsilon-algorithm. Both techniques have been extended to viscous three-dimensional flows and applied to accelerate the convergence of the compressible Navier-Stokes code. A savings of 40 percent in computer time is achieved in this case.
Cheer, A.↗
Permutation codes for the state assignment of fault tolerant sequential machines
A new fault-tolerant state assignment method is suggested for synchronous sequential machines. It is assumed that the inputs are fault free and that for no input it is possible to reach all or most of the states, whose number may be fairly large. Error correcting codes for the state assignment are generated by permutations of a chosen linear code. A state assignment algorithm is developed and its computational complexity is estimated. Examples are given.
Chen, M.↗
Radio frequency interference effect on PN code sequence lock detector
The authors find the probabilities of detection and false alarm of the pseudonoise (PN) sequence code lock detector when strong radio frequency interference (RFI) hits the communications link. Both a linear model and a soft-limiter nonlinear model for a transponder receiver are considered. In addition, both continuous wave (CW) RFI and pulse RFI are analyzed, and a discussion is included of how strong CW RFI can knock out the PN code lock detector in a linear or a soft-limiter transponder. As an example, the Space Station Freedom forward S-band PN system is evaluated. It is shown that a soft-limiter transponder can protect the PN code lock detector against a typical pulse RFI, but it can degrade the PN code lock detector performance more than a linear transponder if CW RFI hits the link.
Kwon, Hyuck M.↗