Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LIGNITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Distribution and occurrence of arsenic in two typical Chinese coals

Two complementary methods, float-sink experience and sequential chemical leaching were used to probe into the occurrence of arsenic in two Chinese coals: Yima (YM) and Datong (DT). Flow injection-hydride generation atomic fluorescence spectrometry was employed to measure the arsenic content in parent coals as well as the size and density-fraction samples. Float-sink experiment indicated that the heavy density fractions were enriched mineral containing arsenic in two bituminous coals studied, as confirmed by the sequential chemical leaching method. Sequential chemical leaching revealed that sulfide arsenic was the primary mode of occurrence (>50%) stable from also abounded in coal with content between 30 and 40%, and a small amount of arsenic took the occurrence of arganic form.

01 COAL, LIGNITE, AND PEAT↗

Combustion characteristics and kinetics of partial gasified coal char

Combustion characteristics and kinetics of partial gasified coal char (PGC-char) were investigated in this article. Two-stage distributed activation energy model (TS-DAEM) and simple model were used to model the combustion kinetics. The experimental results showed that the combustion characteristics of PGC-chars varied with coal types and percentage of gasification. Modeling results showed that TS-DAEM could suitably describe the combustion of PGC-char. The activation energy and pre-exponential factor increased with the increasing of PGC-char gasification percentage, but the percent of high reactivity part decreased. This indicated that the difficulty reactive part in the partial gasified coal char became more and more with the gasification conversion. However, simple model wasn't fit to describe the combustion of PGC-char, especially for PGC-chars with obvious second peak in combustion DTG curves.

01 COAL, LIGNITE, AND PEAT↗

Co-firing coal and municipal solid waste

The aim of this study was to experimentally investigate how different the organic fraction of municipal solid waste (OFMSW) or municipal solid waste (MSW) utilizing strategies affects the gas emission in simple fluidized bed combustion (FBC) of biomass. In this study, ground OFMSW and pulverized coal (PC) were used for co-firing tests. The tests were carried out in a bench-scale bubbling FBC. Coal and bio-waste fuels are quite different in composition. Ash composition of the bio-waste fuels is fundamentally different from ash composition of the coal. Chlorine (Cl) in the MSW may affect operation by corrosion. Ash deposits reduce heat transfer and also may result in severe corrosion at high temperatures. Nitrogen (N) and carbon ) assessments can play an important role in a strategy to control carbon dioxide (CO{sub 2}) and nitrogen oxide (NOx) emissions while raising revenue. Regulations such as subsidies for oil, liquid petroleum gas (LPG) for natural gas powered vehicles, and renewables, especially biomass lines, to reduce emissions may be more cost-effective than assessments. Research and development (RD) resources are driven by energy policy goals and can change the competitiveness of renewables, especially solid waste. The future supply of co-firing depends on energy prices and technical progress, both of which are driven by energy policy priorities.

01 COAL, LIGNITE, AND PEAT↗

Selective catalytic reduction of nitric oxide with ammonia over silica-supported vanadium oxide catalyst

The selective catalytic reduction (SCR) of nitric oxide with excess ammonia in the presence of oxygen on silica-supported vanadium oxide catalyst was studied in a packed-bed reactor, and a mathematical model was proposed for the processes occurring in the reactor. Experimental data were presented for evaluation of the accuracy of the proposed model. Good agreement was observed between the measured and calculated values of the conversion in the outlet of the reactor. Once the validity of the proposed model was verified, it was used to examine the effects of different parameters such as feed temperature, inlet feed composition, and gas hourly space velocity (GHSV) on the conversion of NO over V{sub 2}O{sub 5}/SiO{sub 2} catalyst for practical application. The results for the employed catalyst showed that high NO conversion occurred at temperatures of 280-300C, GHSV less than 2000h{sup -1} (STP), and O{sub 2} concentration greater than 10% v/v. These results clearly demonstrate the high potential for this catalyst to be applied commercially for the control of NOx emissions from flue gases of different sources.

01 COAL, LIGNITE, AND PEAT↗

An investigation on characterizing dense coal-water slurry with ultrasound: theoretical and experimental method

Particle size distribution and concentration in particulate two-phase flow are important parameters in a wide variety of industrial areas. For the purpose of online characterization in dense coal-water slurries, ultrasonic methods have many advantages such as avoiding dilution, the capability for being used in real time, and noninvasive testing, while light-based techniques are not capable of providing information because optical methods often require the slurry to be diluted. In this article, the modified Urick equation including temperature modification, which can be used to determine the concentration by means of the measurement of ultrasonic velocity in a coal-water slurry, is evaluated on the basis of theoretical analysis and experimental study. A combination of the coupled-phase model and the Bouguer-Lambert-Beer law is employed in this work, and the attenuation spectrum is measured within the frequency region from 3 to 12 MHz. Particle size distributions of the coal-water slurry at different volume fractions are obtained with the optimum regularization technique. Therefore, the ultrasonic technique presented in this work brings the possibility of using ultrasound for online measurements of dense slurries.

01 COAL, LIGNITE, AND PEAT↗

Analyses of characteristics of ring-shaped electrostatic meter

This article describes the characteristics of ring-shaped electrostatic pulverized fuel meters and their applications. At the University of Teesside, UK, the electrostatic technique has been used to measure pulverized fuel flow concentration, velocity, and mass flow rate under lean-phase condition. The mathematic model has been developed to express the relationship between the root-mean-square (rms) value of the meter's output voltage and solids mass flow rate. The effects of solids velocity and particle size on measurements have also been reflected in the model. Furthermore, the model presents the sensitivity variations over the cross-sectional area of meter and along the pipe axis. The article also introduces the research carried out at Southeast University in China, where the technique has been extended to measure dense-phase flow of pulverized coal, which is common in gasification and blast furnaces.

01 COAL, LIGNITE, AND PEAT↗

Microbial methane formation from hard coal and timber in an abandoned coal mine

About 7% of the global annual methane emissions originate from coal mining. Also, mine gas has come into focus of the power industry and is being used increasingly for heat and power production. In many coal deposits worldwide, stable carbon and hydrogen isotopic signatures of methane indicate a mixed thermogenic and biogenic origin. In this study, we have measured in an abandoned coal mine methane fluxes and isotopic signatures of methane and carbon dioxide, and collected samples for microbiological and phylogenetic investigations. Mine timber and hard coal showed an in-situ production of methane with isotopic signatures similar to those of the methane in the mine atmosphere. Enrichment cultures amended with mine timber or hard coal as sole carbon sources formed methane over a period of nine months. Predominantly, acetoclastic methanogenesis was stimulated in enrichments containing acetate or hydrogen/carbon dioxide. Molecular techniques revealed that the archaeal community in enrichment cultures and unamended samples was dominated by members of the Methanosarcinales. The combined geochemical and microbiological investigations identify microbial methanogenesis as a recent source of methane in abandoned coal mines.

01 COAL, LIGNITE, AND PEAT↗

Metal reduction at low pH by a Desulfosporosinus species: implications for the biological treatment of acidic mine drainage

We isolated an acid-tolerant sulfate-reducing bacterium, GBSRB4.2, from coal mine-derived acidic mine drainage (AMD)-derived sediments. Sequence analysis of partial 16S rRNA gene of GBSRB4.2 revealed that it was affiliated with the genus Desulfosporosinus. GBSRB4.2 reduced sulfate, Fe(III) (hydr)oxide, Mn(IV) oxide, and U(VI) in acidic solutions (pH 4.2). Sulfate, Fe(III), and Mn(IV) but not U(VI) bioreduction led to an increase in the pH of acidic solutions and concurrent hydrolysis and precipitation of dissolved Al{sup 3+}. Reduction of Fe(III), Mn(IV), and U(VI) in sulfate-free solutions revealed that these metals are enzymatically reduced by GBSRB4.2. GBSRB4.2 reduced U(VI) in groundwater from a radionuclide-contaminated aquifer more rapidly at pH 4.4 than at pH 7.1, possibly due to the formation of poorly bioreducible Ca-U(VI)-CO{sub 3} complexes in the pH 7.1 groundwater.

01 COAL, LIGNITE, AND PEAT↗

Physico-chemical processes for landfill leachate treatment: Experiments and mathematical models

In this study, the adsorption of synthetic landfill leachate onto four kinds of activated carbon has been investigated. From the equilibrium and kinetics experiments, it was observed that coal based PAC presented the highest organic pollutants removal efficiency (54%), followed by coal based GAC (50%), wood based GAC (33%) and wood based PAC (14%). The adsorption equilibrium of PAC and GAC was successfully predicted by Henry-Freundlich adsorption model whilst LDFA + Dual isotherm Kinetics model could describe well the batch adsorption kinetics. The flocculation and flocculation-adsorption experiments were also conducted. The results indicated that flocculation did not perform well on organics removal because of the dominance of low molecular weight organic compounds in synthetic landfill leachate. Consequently, flocculation as pretreatment to adsorption and a combination of flocculation-adsorption could not improve much the organic removal efficiency for the single adsorption process.

01 COAL, LIGNITE, AND PEAT↗

Adsorptive removal of acid blue 113 and tartrazine by fly ash from single and binary dye solutions

Adsorption of two acid dyestuffs, acid blue 113 (AB) and tartrazine (TA), has been studied from their single and binary solutions by using fly ash (FA) as an adsorbent. The S shaped isotherms observed for dye adsorption from single solutions show that both acid dyes are not preferred at a low concentration region whereas adsorption of the dyes from binary solutions is enhanced via solute-solute interactions. Although the L-shaped isotherm is observed in binary solutions adsorbability of AB decreases in concentrated solutions with respect to single one, time dependency of adsorption is well described with a pseudo-second-order kinetic model as well as the linear relation of Bt vs. t plots (not passing through origin) indicates that film diffusion is effective on dye adsorption. Modeled isotherm curves using isotherm parameters of the Freundlich and Dubinin-Radushkevich (D-R) equations adequately fit to experimental equilibrium data. Equilibrium adsorption of AB in binary solutions has been quite well predicted by the extended Freundlich and the Sheindorf-Rebuhn-Sheintuch (SRS) models. In general, the isotherm curves constructed in the temperature range of 298-328K show that the optimum temperature is 318K for AB removal from both single and binary solutions.

01 COAL, LIGNITE, AND PEAT↗

State-of-the-art adsorption and membrane separation processes for carbon dioxide production from carbon dioxide emitting industries

With the growing concern about global warming placing greater demands on improving energy efficiency and reducing CO{sub 2} emissions, the need for improving the energy intensive, separation processes involving CO{sub 2} is well recognized. The US Department of Energy estimates that the separation of CO{sub 2} represents 75% of the cost associated with its separation, storage, transport, and sequestration operations. Hence, energy efficient, CO{sub 2} separation technologies with improved economics are needed for industrial processing and for future options to capture and concentrate CO{sub 2} for reuse or sequestration. The overall goal of this review is to foster the development of new adsorption and membrane technologies to improve manufacturing efficiency and reduce CO{sub 2} emissions. This study focuses on the power, petrochemical, and other CO{sub 2} emitting industries, and provides a detailed review of the current commercial CO{sub 2} separation technologies, i.e., absorption, adsorption, membrane, and cryogenic, an overview of the emerging adsorption and membrane technologies for CO{sub 2} separation, and both near and long term recommendations for future research on adsorption and membrane technologies. Flow sheets of the principal CO{sub 2} producing processes are provided for guidance and new conceptual flow sheets with ideas on the placement of CO{sub 2} separations technologies have also been devised.

01 COAL, LIGNITE, AND PEAT↗

Dual inoculation with an Aarbuscular Mycorrhizal fungus and Rhizobium to facilitate the growth of alfalfa on coal mine substrates

A pot experiment was conducted to investigate the effects of Glomus mosseae and Rhizobium on Medicago sativa grown on three types of coal mine substrates, namely a mixture of coal wastes and sands (CS), coal wastes and fly ash (CF), and fly ash (FA). Inoculation with Rhizobium alone did not result in any growth response but G. mosseae alone displayed a significant effect on plant growth. G. mosseae markedly increased the survival rate of M. sativa in CS substrate. In CF and FA substrates the respective oven dry weights of M. sativa inoculated with G. mosseae were 1.8 and 5.1 times higher than those without inoculation. Based on nitrogen (N), phosphorus (P) and potassium (K) uptake and legume growth, the results also show that dual inoculation in CS and CF substrates elicited a synergistic effect. This indicates that inoculation with arbuscular mycorrhizal (AM) fungi may be a promising approach for revegetation of coal mine substrates.

01 COAL, LIGNITE, AND PEAT↗

Which is the best oxidant for complexed iron removal from groundwater: The Kogalym case

A short overview of the significance of a preoxidation stage groundwater treatment is presented. As an example the case of complexed iron removal from Kogalym groundwater (Tjumen, Siberia, Russian Federation) using different preoxidants (ozone, oxygen, chlorine, hydrogen peroxide, and potassium permanganate) is discussed. The key problem is stable di- and trivalent iron-organic complexes in groundwater which after aeration tend to pass through the hydroanthracite-sand gravity filters. The total organic carbon (TOC) content in raw groundwater is in the range of 3.2-6.4 mg/L, total iron content 2.7-6.0 mg/L and divalent iron content 2.4-4.0 mg/L. Separation from Kogalym groundwater by XAD-16 adsorbent humic matter fraction was homogeneous, with only 1 peak on the chromatogram with maximum Rt = 10.75 min and corresponding molecular mass 1911 ({lt} 2000). The final developed treatment technology is based on the water oxidation/reduction potential (ORP) optimization according to the iron system pE-pH diagram and consists of intensive aeration of raw water in the Gas-Degas Treatment (GDT) unit with the following sequence: filtration through the hydroanthracite and special anthracite Everzit, with intermediate enrichment of water with pure oxygen between the filtration stages.

01 COAL, LIGNITE, AND PEAT↗

Physicochemical behavior of sulphonated acetone-formaldehyde resin and naphthalene sulfonate-formaldehyde condensate in coal-water interface

This article studies the physicochemical characteristic of two anionic dispersants sulphonated acetone-formaldehyde resin (SAF) and naphthalene sulfonate-formaldehyde condensate (FDN) at coal-water interface, including contact angle, adsorption amount, thickness of adsorbed film, and zeta potential, using four different ranks of coals. The results show that SAF has better wetting property than FDN on coal surface. The adsorption amount of SAF in coal-water interface is greater than that of FDN, and that the thickness of adsorbed films of SAF and FDN on Datong coal measured by x-ray photoelectron spectroscopy (XPS) are respectively 6.38nm and 2.11nm. Moreover, the measurements of zeta potentials in coal-water interface show that SAF has greater capacity in charging coal surface with electronegativity. Based on the investigation, the adsorption models of SAF and FDN on different rank of coals are presented.

01 COAL, LIGNITE, AND PEAT↗

Comparison of coal ash particle size distributions from Berner, and Dekati low pressure impactors

This article presents the differential mass size distributions of coal combustion particulate matter (PM) determined with the Berner low-pressure impactor (BLPI, Hauke Model 25-410.015) and a newer generation of low pressure impactor, the Dekati low-pressure impactor (DLPI, Dekati Ltd Model 6281). The collection characteristics of the BLPI and DLPI are compared and cutoff diameters are calculated. Samples were collected in the post-combustion zone of a 19 kW vertical downflow combustor from two coal types. Both BLPI and DLPI represent a tri-modal distribution and give statistically similar characterizations of the coal ash particle size distribution. Distributions generated from DLPI data have higher fractions of submicron particles compared to those generated from BLPI data. The DLPI's two additional stages may provide greater resolution in the submicron region than the BLPI.

01 COAL, LIGNITE, AND PEAT↗

Heavy metal leaching from coal fly ash amended container substrates during Syngonium production

Coal fly ash has been proposed to be an alternative to lime amendment and a nutrient source of container substrates for ornamental plant production. A great concern over this proposed beneficial use, however, is the potential contamination of surface and ground water by heavy metals. In this study, three fly ashes collected from Florida, Michigan, and North Carolina and a commercial dolomite were amended in a basal substrate. The formulated substrates were used to produce Syngonium podophyllum Schott 'Berry Allusion' in 15-cm diameter containers in a shaded greenhouse. Leachates from the containers were collected during the entire six months of plant production and analyzed for heavy metal concentrations. There were no detectable As, Cr, Hg, Pb, and Se in the leachates; Cd and Mo were only detected in few leachate samples. The metals constantly detected were Cu, Mn, Ni, and Zn. The total amounts of Cu, Mn, Ni, and Zn leached during the six-month production period were 95, 210, 44, and 337 {mu} g per container, indicating that such amounts in leachates may contribute little to contamination of surface and ground water. In addition, plant growth indices and fresh and dry weights of S. podophyllum 'Berry Allusion' produced from fly ash and dolomite-amended substrates were comparable except for the plants produced from the substrate amended with fly ash collected from Michigan which had reduced growth indices and fresh and dry weights. Thus, selected fly ashes can be alternatives to commercial dolomites as amendments to container substrates for ornamental plant production. The use of fly ashes as container substrate amendments should represent a new market for the beneficial use of this coal combustion byproduct.

01 COAL, LIGNITE, AND PEAT↗

Progress and new developments in carbon capture and storage

Growing concern over the impact on global climate change of the buildup of greenhouse gases (GHGs) in the atmosphere has resulted in proposals to capture carbon dioxide (CO{sub 2}) at large point sources and store it in geologic formations, such as oil and gas reservoirs, unmineable coal seams, and saline formations, referred to as carbon capture and storage (CCS). There are three options for capturing CO{sub 2} from point sources: post-combustion capture, pre-combustion capture, and oxy-combustion. Several processes are available to capture CO{sub 2}, and new or improved processes are under development. However, CO{sub 2} capture is the most expensive part of CCS, typically accounting for 75% of overall cost. CCS will benefit significantly from the development of a lower cost post-combustion CO{sub 2} capture process that can be retrofitted to existing power plants. Once captured, the CO{sub 2} is compressed to about 150 atm and pipelined at supercritical conditions to a suitable storage site. Oil and gas reservoirs, because they have assured seals and are well characterized, are promising early opportunity sites. Saline formations are much more extensive and have a huge potential storage capacity, but are much less characterized. Several commercial and a number of pilot CCS projects are underway around the world.

01 COAL, LIGNITE, AND PEAT↗

Assessment of reduction behavior of hematite iron ore pellets in coal fines for application in sponge ironmaking

Studies on isothermal reduction kinetics (with F grade coal) in fired pellets of hematite iron ores, procured from four different mines of Orissa, were carried out in the temperature range of 850-1000C to provide information for the Indian sponge iron plants. The rate of reduction in all the fired iron ore pellets increased markedly with a rise of temperature up to 950C, and thereafter it decreased at 1000C. The rate was more intense in the first 30 minutes. All iron ores exhibited almost complete reduction in their pellets at temperatures of 900 and 950C in 2 hours' heating time duration, and the final product morphologies consisted of prominent cracks. The kinetic model equation 1-(1-a){sup 1/3}=kt was found to fit best to the experimental data, and the values of apparent activation energy were evaluated. Reductions of D. R. Pattnaik and M. G. Mohanty iron ore pellets were characterized by higher activation energies (183 and 150 kJ mol{sup -1}), indicating carbon gasification reaction to be the rate-controlling step. The results established lower values of activation energy (83 and 84 kJ mol{sup -1}) for the reduction of G. M. OMC Ltd. and Sakaruddin iron ore pellets, proposing their overall rates to be controlled by indirect reduction reactions.

01 COAL, LIGNITE, AND PEAT↗