Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LEAD OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Surface oxidation of GaN(0001): Nitrogen plasma-assisted cleaning for ultrahigh vacuum applications

The cleaning of metal-organic vapor-phase epitaxial GaN(0001) template layers grown on sapphire has been investigated. Different procedures, performed under ultrahigh vacuum conditions, including degassing and exposure to active nitrogen from a radio frequency nitrogen plasma source have been compared. For this purpose, x-ray photoelectron spectroscopy, reflection high-energy electron diffraction, and scanning tunneling microscopy have been employed in order to assess chemical as well as structural and morphological surface properties. Initial degassing at 600 °C under ultrahigh vacuum conditions only partially eliminates the surface contaminants. In contrast to plasma assisted nitrogen cleaning at temperatures as low as 300 °C, active-nitrogen exposure at temperatures as high as 700 °C removes the majority of oxide species from the surface. However, extended high-temperature active-nitrogen cleaning leads to severe surface roughening. Optimum results regarding both the removal of surface oxides as well as the surface structural and morphological quality have been achieved for a combination of initial low-temperature plasma-assisted cleaning, followed by a rapid nitrogen plasma-assisted cleaning at high temperature.

36 MATERIALS SCIENCE↗

Modeling Joule Heating Effect on Lunar O2 Generation via Electrolytic Reduction.

Kennedy Space Center is leading research work on lunar O2 generation via electrolytic reduction of regolith; the metal oxide present in the regolith is dissociated in oxygen anions and metal cations leading to the generation of gaseous oxygen at the anode and liquid metal at the cathode. Electrical resistance of molten regolith is high, leading to heating of the melt when electrical current is applied between the electrodes (Joule heating). The authors have developed a 3D model using a rigorous approach for two coupled physics (thermal and electrical potential) to not only study the effect of Joule heating on temperature distribution throughout the molten regolith but also to evaluate and optimize the design of the electrolytic cells. This paper presents the results of the thermal analysis performed on the model and used to validate the design of the electrolytic cell.

Dominquez, Jesus↗

A final report on the extension of the MCSCF/CI method

For the period of July 1982 through January 1983, the research carried out focused on the nature of metal adsorbate bonding. Two main areas were investigated in detail: (1) the adsorption of CO on Al, Na, Mg and Ni; and (2) bonding in transition metal oxides, CuO, CrO and MoO. These theoretical studies have lead to a new understanding of CO-metal bonding as well as to a better understanding of the d involvement in the bonding in transition metal oxides. Four areas associated with cluster model studies are discussed in detail: hybridization and changing in cluster model studies, the adsorption of CO on metals (Al, Na, Mg), the adsorption of CO on Ni, and finally the use of effective core potentials (ECP) in cluster models.

Nelin, C. J.↗

Corrosion by liquid lead and lead-bismuth: experimental results review and analysis

Liquid metal technologies for liquid lead and lead-bismuth alloy are under wide investigation and development for advanced nuclear energy systems and waste transmutation systems. Material corrosion is one of the main issues studied a lot recently in the development of the liquid metal technology. This study reviews corrosion by liquid lead and lead bismuth, including the corrosion mechanisms, corrosion inhibitor and the formation of the protective oxide layer. The available experimental data are analyzed by using a corrosion model in which the oxidation and scale removal are coupled. Based on the model, long-term behaviors of steels in liquid lead and lead-bismuth are predictable. This report provides information for the selection of structural materials for typical nuclear reactor coolant systems when selecting liquid lead or lead bismuth as heat transfer media.

36 MATERIALS SCIENCE↗

Hypersonic engine component experiments in high heat flux, supersonic flow environment

A major concern in advancing the state-of-the-art technologies for hypersonic vehicles is the development of an aeropropulsion system capable of withstanding the sustained high thermal loads expected during hypersonic flight. Even though progress has been made in the computational understanding of fluid dynamics and the physics/chemistry of high speed flight, there is also a need for experimental facilities capable of providing a high heat flux environment for testing component concepts and verifying/calibrating these analyses. A hydrogen/oxygen rocket engine heat source was developed at the NASA Lewis Research Center as one element in a series of facilities at national laboratories designed to fulfill this need. This 'Hot Gas Facility' is capable of providing heat fluxes up to 450 w/sq cm on flat surfaces and up to 5,000 w/sq cm at the leading edge stagnation point of a strut in a supersonic flow stream. Gas temperatures up to 3050 K can also be attained. Two recent experimental programs conducted in this facility are discussed. The objective of the first experiment is to evaluate the erosion and oxidation characteristics of a coating on a cowl leading edge (or strut leading edge) in a supersonic, high heat flux environment. Macrophotographic data from a coated leading edge model show progressive degradation over several thermal cycles at aerothermal conditions representative of high Mach number flight. The objective of the second experiment is to assess the capability of cooling a porous surface exposed to a high temperature, high velocity flow environment and to provide a heat transfer data base for a design procedure. Experimental results from transpiration cooled surfaces in a supersonic flow environment are presented.

Gladden, Herbert J.↗

The role of ligands in the optical and electronic spectra of CdSe nanoclusters

We investigate the impact of ligands on morphology, electronic structure, and optical response of the Cd33Se33 cluster, which already overlapps in size with the smallest synthesized CdSe quantum dots (QDs). Our Density Functional Theory (DFT) calculations demonstrate significant surface reorganization both for the bare cluster and for the cluster capped by amine and phosphine oxide ligand models. We observe strong surface-ligand interactions leading to substantial charge redistribution and polarization effects on the surface. This effect results in the appearance of hybridized states, where the electronic density is spread over the cluster and the ligands. Neither the ligand's nor hybridized molecular orbitals appear as trap states inside or near the band gap of the QD. Instead, being optically dark, dense hybridized states from the edges of the valence and the conduction bands could open new relaxation channels for high energy photoexcitations. Comparing quantum dots passivated by different ligands, we found that hybridized states are denser in at the edge of the conduction band of the cluster ligated with phosphine oxide molecules than that with primary amines. Such a different manifestation of ligand binding may potentially lead to the faster electron relaxation in dots passivated by phosphine oxide than by amine ligands, which is in agreement with experimental data.

36 MATERIALS SCIENCE↗

Study of the Anisotropic Elastoplastic Properties of β-Ga{sub 2}O{sub 3} Films Synthesized on SiC/Si Substrates

The structural and mechanical properties of gallium oxide films grown on silicon crystallographic planes (001), (011), and (111) with a buffer layer of silicon carbide are investigated. Nanoindentation was used to study the elastoplastic properties of gallium oxide and also to determine the elastic recovery parameter of the films under study. The tensile strength, hardness, elasticity tensor, compliance tensor, Young’s modulus, Poisson’s ratio, and other characteristics of gallium oxide were calculated using quantum chemistry methods. It was found that the gallium oxide crystal is auxetic because, for some stretching directions, the Poisson’s ratio takes on negative values. The calculated values correspond quantitatively to the experimental data. It is concluded that the elastoplastic properties of gallium oxide films approximately correspond to the properties of bulk crystals and that a change in the orientation of the silicon surface leads to a significant change in the orientation of gallium oxide.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Roles of Surface Step on Pt Nanoparticles in Electro-oxidation of Carbon Monoxide and Methanol

Design of highly active nanoscale catalysts for electro-oxidation of small organic molecules is of great importance to the development of efficient fuel cells. Increasing steps on single-crystal Pt surfaces is shown to enhance the activity of CO and methanol electro-oxidation up to several orders of magnitude. However, little is known about the surface atomic structure of nanoparticles with sizes of practical relevance, which limits the application of fundamental understanding in the reaction mechanisms established on single-crystal surfaces to the development of active, nanoscale catalysts. In this study, we reveal the surface atomic structure of Pt nanoparticles supported on multiwall carbon nanotubes, from which the amount of high-index surface facets on Pt nanoparticles is quantified. Correlating the surface steps on Pt nanoparticles with the electrochemical activity and stability clearly shows the significant role of surface steps in enhancing intrinsic activity for CO and methanol electro-oxidation. Here, we show that increasing surface steps on Pt nanoparticles of {approx}2 nm can lead to enhanced intrinsic activity up to {approx}200% (current normalized to Pt surface area) for electro-oxidation of methanol.

10 SYNTHETIC FUELS↗

Transparent oxyfluoride glass ceramics co-doped with Er{sup 3+} and Yb{sup 3+} - Crystallization and upconversion spectroscopy

Transparent glass ceramics in the system SiO{sub 2}-B{sub 2}O{sub 3}-PbO-CdO-PbF{sub 2}-CdF{sub 2}-YbF{sub 3}-ErF{sub 3} showing infrared to visible anti-Stokes (upconversion) luminescence are studied in the present work. The glass compositions have been optimized in order to reduce the melting temperature and, hence, to obtain laboratory scale samples with good optical quality. Erbium-doped nanoscale Pb{sub 4}Yb{sub 3}F{sub 17} crystals are precipitated in the precursor glasses during annealing at temperatures 30-40 K above T{sub g}. A kinetically self-constrained growth explains the nano sizes of the crystals. Both the Stokes and anti-Stokes luminescence spectra of glasses could be explained with clustering of the Yb{sup 3+} and Er{sup 3+} ions in fluorine-rich regions. At the annealing temperature these regions act as nucleation precursors. The crystal growth further enhances the local concentration of these ions. Consequently, a series of energy transfer and energy cross relaxation processes occurs between adjacent rare earth ions leading to the observed luminescence spectra of the glass ceramics studied. -- Graphical abstract: A highly viscous shell (shown in the picture in dark blue) is build around the growing crystal (white circles). When the shell's T{sub g} approaches the annealing temperature, the crystal growth is fully suppressed for kinetic reasons. The upconversion luminescence, resulting from the simultaneous absorption of two and even three infrared photons, is depicted schematically in the right part of the figure. Display Omitted Highlights: {yields} New oxyfluoride glass compositions with reduced melting temperature are formulated. {yields} The phase Pb{sub 4}Yb{sub 3}F{sub 17} doped with Er{sup 3+} ions crystallizes in these glasses. {yields} A kinetically self-constrained growth explains the nano sizes of the crystals. {yields} Clustering of Yb{sup 3+}, Er{sup 3+} and Pb{sup 2+} ions into fluorine-rich glass regions is observed. {yields} The luminescence of glass-ceramics is consistent with its structure.

36 MATERIALS SCIENCE↗

Synthesis and electrochemical capacitance of long tungsten oxide nanorod arrays grown vertically on substrate

Highlights: ► Growth of long amorphous tungsten oxide nanorods on a substrate. ► Formation of single-crystalline tungsten oxide nanorods by a heat-treatment. ► High electrochemical pseudocapacitance of 2.8 mF cm{sup −2}. ► Excellent cyclability of psuedocapacitance up to 1000 cycles. -- Abstract: Long tungsten oxide nanorods are vertically grown on Al/W/Ti coated silicon substrates using a two-step anodization process. The first anodization of the Al film forms a mesh-like mask of anodic aluminum oxide, and the second anodization of the W film results in the formation of a buffer layer, a bottom nanorod, and a top nanorod of amorphous tungsten oxide. A pore-widening process prior to the second anodization leads to the enhancement of nanorod length above approximately 500 nm. After a heat-treatment, the tungsten oxide nanorods are crystallized to form a single crystalline structure while the buffer layer forms a polycrystalline structure. The crystalline tungsten oxide nanorods show a cyclic voltammogram retaining the quasi-rectangular shape of an electrochemically reversible faradaic redox reaction, i.e., a typical pseudocapacitive behavior. The maximum electrochemical capacitance per apparent surface area reaches approximately 2.8 mF cm{sup −2} at the voltage scan rate of 20 mV s{sup −1}, and the excellent cyclability of charge–discharge process is maintained up to 1000 cycles.

36 MATERIALS SCIENCE↗

Beneficial effects of vitamin C treatment on pregnant rats exposed to formaldehyde: Reversal of immunosuppression in the offspring

Inhalation of formaldehyde (FA) during the pregnancy induces oxidative stress in the uterus, and here we hypothesized that this mechanism may be responsible for the impaired immune response detected in the offspring. In order to investigate the protective effects of Vitamin C on the oxidative stress induced by FA in the uterine microenvironment, pregnant Wistar rats were treated with vitamin C (150 mg/kg, gavage) or vehicle (distilled water, gavage) 1 h before FA exposure (0.92 mg/m{sup 3}, 1 h/day, 5 days/week), for 21 days, and the 30 days old offspring were submitted to LPS injection (Salmonella abortus equi, 5 mg/kg, i.p.). The enhanced gene expression of iNOS, COX-1 and COX-2 and decreased gene expression of SOD-2 in the uterus of FA exposed mothers was rescued by Vit C treatment. Moreover, vitamin C rescued the impaired immune response elicited by LPS in the offspring from FA exposed mothers, by increasing the number of blood and bone marrow leukocytes, and augmenting gene expression of IL-6 and reducing mRNA levels of IL-10 and IFN in the lungs. Vitamin C treatment did not rescue the impaired TLR4-NF-kB pathway in the lung of the offspring, suggesting that FA-induced uterine oxidative stress affects other inflammatory pathways activated by LPS in the offspring. Together, data obtained here confirm our hypothesis that FA-induced oxidative stress in the uterine microenvironment modifies the programming mechanisms of the immune defenses of offspring, leading to an impaired host defense. - Highlights: • FA exposure during pregnancy induces oxidative stress in the uterus. • Vitamin C treatment blunted the oxidative stress in uterus induced by FA exposure. • Oxidative stress in uterus after FA exposure impairs the immune response of offspring. • Vitamin C in pregnant rats rescued the impaired immune response in the offspring.

60 APPLIED LIFE SCIENCES↗

Reimagining the $e_g$ 1 Electronic State in Oxygen Evolution Catalysis: Oxidation-State-Modulated Superlattices as a New Type of Heterostructure for Maximizing Catalysis

We report that the discovery of solid-phase, inexpensive transition-metal-based water oxidation catalysts is a central goal for renewable energy, and has led to a general consensus that a partially populated metal e g d-electronic state is desirable, leading to favorable catalysis for certain elements in specific oxidation states. In manganese systems, the key species is manganese(III), whose high-spin d 4 electronic configuration places an unpaired electron in the e g orbital, which is postulated to contribute to electronic and structural features that support catalysis. Based on density functional theory calculations, it is predicted that electron transfer would be facilitated by a catalyst with alternating low- and high-Mn III -content sheets, which positions neighboring band edges in closer energetic proximity. The preparation of such catalysts is demonstrated for the first time and it is shown that the catalytic activity is maximized in these systems over more uniform, but more Mn III -rich systems. The best catalyst possesses alternating high-and low-average oxidation state sheets with interlayer Cs + ions, and has an overpotential of 450 mV at 10 mA, which represents an improvement of 250 mV over the best unmodified synthetic potassium birnessites. Using scanning tunneling spectroscopy, bandgap modulations consistent with the theoretically predicted band edge shifts are detected.

36 MATERIALS SCIENCE↗

Synthesis, crystal structure and optical properties of the new lead fluoride borate-Pb{sub 2}BO{sub 3}F

A new compound, Pb{sub 2}BO{sub 3}F, has been grown by high temperature solution method from the PbO-PbF{sub 2}-B{sub 2}O{sub 3} system for the first time. The crystal structure of this compound has been identified by single crystal X-ray diffraction analysis. It crystallizes in the hexagonal system, space group P6{sub 3}/m (No. 176) with unit-cell parameters a=7.2460(3) A, c=14.5521(17) A, Z=6, V=661.69(9) A{sup 3}. Its structure was solved by the direct methods and refined to R{sub 1}=0.0163 and wR{sub 2}=0.0367. The structure of Pb{sub 2}BO{sub 3}F consists of the distorted PbO{sub 3}F{sub 2} groups and BO{sub 3} triangles, which are all symmetric with each other in the gestalt structure to the extent that the Pb{sub 2}BO{sub 3}F compound crystallizes in the symmetric space group. The powder X-ray diffraction pattern of the Pb{sub 2}BO{sub 3}F has been measured. The BO{sub 3} functional groups presented in the sample were identified by FTIR spectrum. The DTA curve of Pb{sub 2}BO{sub 3}F suggests that Pb{sub 2}BO{sub 3}F melts congruently at 448 deg. C. - Graphical Abstract: The Pb atoms are in the five coordination environments bonded to three O atoms and two F atoms to make up the distortional PbO{sub 3}F{sub 2} polyhedra. Every six PbO{sub 3}F{sub 2} polyhedra are connected by one F(1) atom to form the symmetrical structure, and then the distortion of the PbO{sub 3}F{sub 2} polyhedra is offset. Highlights: > A new compound, Pb{sub 2}BO{sub 3}F, has been grown by high temperature solution method from the PbO-PbF{sub 2}-B{sub 2}O{sub 3} system for the first time. > It crystallizes in the hexagonal system, space group P6{sub 3}/m (No. 176) with unit-cell parameters a=7.2460(3) A, c=14.5521(17) A, Z=6, V=661.69(9) A{sup 3}. > UV-vis-NIR Diffuse-Reflectance spectrum shows that its ultraviolet cutoff edge is about 288 nm. > DTA curve of Pb{sub 2}BO{sub 3}F suggests that Pb{sub 2}BO{sub 3}F melts congruently at 448 deg. C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New Oxide Materials for an Ultra High Temperature Environment

In this project, a new oxide material, Hf 6 Ta 2 O 17 has been successfully synthesized by the controlled oxidization of Hf-Ta alloys. This oxide exhibits good oxidation resistance, high temperature phase stability up to more than 2000°C, low thermal conductivity and thus could serve as a component or a coating material in an ultrahigh temperature environment. We have examined the microstructure evolution and phase formation sequence during the oxidation exposure of Hf-Ta alloys at 1500°C and identified that the oxidation of a Hf-26.7atomic %Ta alloy leads to the formation of a single phase adherent Hf 6 Ta 2 O 17 with a complex atomic structure i.e. superstructure. The overall reactive diffusion pathway is consistent with the calculated Hf-Ta-O ternary phase diagram. Besides the synthesis of Hf 6 Ta 2 O 17 superstructure by oxidizing Hf-Ta alloys, we have also developed a synthesis method based upon the reactive sintering of the correct ratios of mixed powders of HfO 2 and Ta 2 O 5 and verified the low thermal conductivity of Hf 6 Ta 2 O 17 superstructure on these samples. We have completed a preliminary analysis of the oxidation kinetics for Hf 6 Ta 2 O 17 , which shows an initial parabolic oxidation kinetics.

36 MATERIALS SCIENCE↗

Increasing the Thermal Stability of Aluminum Titanate for Solid Oxide Fuel Cell Anodes

Solid-oxide fuel cells (SOFCs) show great potential as a power source for future space exploration missions. Because SOFCs operate at temperatures significantly higher than other types of fuel cells, they can reach overall efficiencies of up to 60% and are able to utilize fossil fuels. The SOFC team at GRC is leading NASA's effort to develop a solid oxide fuel cell with a power density high enough to be used for aeronautics and space applications, which is approximately ten times higher than ground transport targets. layers must be able to operate as a single unit at temperatures upwards of 900'C for at least 40,000 hours with less than ten percent degradation. One key challenge to meeting this goal arises from the thermal expansion mismatch between different layers. The amount a material expands upon heating is expressed by its coefficient of thermal expansion (CTE). If the CTEs of adjacent layers are substantially different, thermal stresses will arise during the cell's fabrication and operation. These stresses, accompanied by thermal cycling, can fracture and destroy the cell. While this is not an issue at the electrolyte-cathode interface, it is a major concern at the electrolyte-anode interface, especially in high power anode-supported systems. electrolyte are nearly identical. Conventionally, this has been accomplished by varying the composition of the anode to match the CTE of the yittria-stabilized zirconia (YSZ) electrolyte (approx.10.8x10(exp -6/degC). A Ni/YSZ composite is typically used as a base material for the anode due to its excellent electrochemical properties, but its CTE is about 13.4x10(exp -6/degC). One potential way to lower the CTE of this anode is to add a small percentage of polycrystalline Al2TiO5, with a CTE of 0.68x10(exp -6/degC, to the Ni/YSZ base. However, Al2TiO5 is thermally unstable and loses its effectiveness as it decomposes to Al2O3 and TiO2 between 750 C and 1280 C. be used as additives to increase the thermal stability of Al2TiO5 in SOFC operating conditions without adversely affecting the electrochemical properties of the SOFC anode. Three candidate materials were chosen through an extensive literature review: MgO, Fe2O3, and ZrTiO4. Although all three have been shown to prevent Al2TiO5 decomposition under various conditions, their effectiveness in the temperature range and atmosphere of the SOFC has not yet been evaluated. Several batches of Al2TiO5 with varying amounts of additives were prepared, exposed to reducing and oxidizing atmospheres at elevated temperatures, and the resulting decomposition of Al2TiO5 was measured. The most promising additives were further evaluated with the goal of ultimately preparing low CTE anodes that are chemically compatible to current systems. Adding minor constituents to stabilize Al2TiO5 could ultimately preserve its low CTE for the life of the fuel cell and improve the cell's long-term performance without a drop in anode conductivity. Further, these low CTE filler additions could allow the use of new sulfur tolerant anode materials, improving the viability of SOFCs for future aeronautics and space applications. Every SOFC consists of a cathode and an anode separated by an electrolyte, These three One way to avoid this problem is to design the cell such that the CTEs of the anode and The objective of this summer research project was to evaluate several materials that could

Bender, Jeffrey B.↗

Oxides related to cadmium telluride solar cells

Polycrystalline cadmium telluride (CdTe) is a leading material in photovoltaic technology due to its high absorption coefficient and near-optimum bandgap of 1.44 eV. It is known that CdTe film processing can promote surface oxidation depending on the growth environment and upon exposure to different oxidation conditions. For example, CdTeO3 forms when the CdTe film is treated in heated dry air, while in humid air, CdTe2O5 is detected. These oxides feature tellurium in the oxidation state +4 compared to the +2 state in CdTe. Other possible relevant oxides are CdO, TeO2, and TeO3. Using hybrid density functional calculations, we studied the electronic structure of these oxide materials and their band alignment to CdTe, which are essential parameters in the characterization of the interfaces at grain boundaries. The goal is to understand their stability and possible effects on passivating grain boundaries. The results are compared to the available experimental data.

14 SOLAR ENERGY↗

Theoretical and Experimental Investigation of Functionalized Cyanopyridines Yield an Anolyte with an Extremely Low Reduction Potential for Nonaqueous Redox Flow Batteries

Abstract Cyanopyridines and cyanophenylpyridines were investigated as anolytes for nonaqueous redox flow batteries (RFBs). The three isomers of cyanopyridine are reduced at potentials of −2.2 V or lower vs. ferrocene +/0 (Fc +/0 ), but the 3‐CNPy⋅ − radical anion forms a sigma‐dimer that is re‐oxidized at E ≈−1.1 V, which would lead to poor voltaic efficiency in a RFB. Bulk electrochemical charge‐discharge cycling of the cyanopyridines in acetonitrile and 0.50 M [NBu 4 ][PF 6 ] shows that 2‐CNPy and 4‐CNPy lose capacity quickly under these conditions, due to irreversible chemical reaction/decomposition of the radical anions. Density‐functional theory (DFT) calculations indicated that adding a phenyl group to the cyanopyridines would, for some isomers, limit dimerization and improve the stability of the radical anions, while shifting their E 1/2 only about +0.10 V relative to the parent cyanopyridines. Among the cyanophenylpyridines, 3‐CN‐6‐PhPy and 3‐CN‐4‐PhPy are the most promising as anolytes. They exhibit reversible reductions at E 1/2 =−2.19 and −2.22 V vs. ferrocene +/0 , respectively, and retain about half of their capacity after 30 bulk charge‐discharge cycles. An improved version of 3‐CN‐6‐PhPy with three methyl groups (3‐cyano‐4‐methyl‐6‐(3,5‐dimethylphenyl)pyridine) has an extremely low reduction potential of −2.50 V vs. Fc +/0 (the lowest reported for a nonaqueous RFB anolyte) and loses only 0.21 % of capacity per cycle during charge‐discharge cycling in acetonitrile.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗