Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Joining”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Injection of isotopic anomalies into the early solar nebula

The effectiveness of injecting material from outside the solar system into the early solar nebula was studied. Hydrodynamic calculations showed that the conditions of external injection of isotopically anomalous matter resemble a supernova remnant shell impacting an interstellar H I cloud. Since the injection process for grains or gas is determined before the impinging material penetrates a skin layer, the results for an H I edge should be valid for any configuration which joins the interstellar medium with an H I boundary zone. The effects of initial injection velocity, gas cooling, and magnetic fields are considered, and it is shown that grain penetration is limited to a layer with column density on the order of the grain mass/area ratio and that Rayleigh-Taylor instabilities are not expected to be effective at mixing the anomalous matter into the nebula during a cloud/shell interaction.

Margolis, S. H.↗
NASA NTRS1979

Fabrication research for supersonic cruise aircraft

Advanced fabrication and joining processes for titanium and composite materials are being investigated by NASA to develop technology for the Supersonic Cruise Research (SCR) Program. Full-scale structural panels are being designed and fabricated to meet the criteria of an existing integrally stiffened shear panel on the upper wing surface of the NASA YF-12 aircraft. The program consists of laboratory testing and Mach 3 flight service of full-scale structural panels and laboratory testing of representative structural element specimens. Borsic/aluminum honeycomb-core, titanium clad Borsic/aluminum skin-stringer, graphite/PMR-15 polyimide honeycomb-core, and titanium superplastically formed/diffusion bonded panels have been designed, fabricated, and tested. Graphite/LARC-160 polyimide skin-stringer panels have been designed, and fabrication methods are being developed.

Hoffman, E. L.↗
NASA NTRS1979

Beam builder for space fabrication

Construction of a beam builder for producing triangular truss aluminum beams for use on large space structures is described. The machine will fabricate 0.04 cm thick 2024-T3 aluminum alloy into beams weighing 1.265 kg-m with side braces spot-welded to end caps to fabricate a triangular truss configuration up to 305 m long. The design characteristics, the electrical subsystems, the power requirements of the spot welding equipment, and the computer system for coordinating the motion of the Yoder rolling mills for forming caps from aluminum coils are described. Spot welding was compared with ultrasonic welding, stapling, wire stitching, riveting, grommets, stamp-lok, and pierce and fold joining methods with respect to ease of operation, safety, practicality, and ease of energy consumption. The beam builder will be evaluated to identify design requirements which can be utilized for the space flight version of its concept.

Ehl, J. H.↗
NASA NTRS1980

X-ray technique verifies weld-root fusion

Small holes drilled along back edge of surface to be joined are filled when weld root is adequately fused. Holes 2% of thickness of material can be detected with X-rays. Absence of detectable holes indicates good weld. Procedure has been proven in production and is more reliable than conventional X-ray methods.

Kleint, R. E.↗
NASA NTRS1980

Jig for assembling large composite panels

Layup of composite panels as large as 15 by 60 ft is greatly facilitated by simple mechanism. Jig consists of flat, detachable table, and curved laminating-plate joined by rack and pinion to insure accurate registration. Vacuum holds thin plastic film to laminating-plate. Preimpregnated composite sheet is applied to plate, which is then lowered face down onto table. Release of vacuum leaves layer and film and table. Film is peeled off, and steps are repeated for next layer of laminate.

Watts, J. T.↗
NASA NTRS1980

Connector heat shield

Polytetrafluoroethylene tape wrapped around electrical connectors protects them from heat damage during soldering. Tape is easily removed after contacts are joined.

Clarke, S.↗
NASA NTRS1980

A versatile tunnel acts as a flexible duct

Tunnel activated by cable assembly can be expanded, contracted, and bent similar to flexible duct without uncoupling at either end. Tunnel was developed to join reusable space vehicle with cargo module and could be modified to be used as hydraulic or pneumatic hose or duct connecting complex moveable joints in remote manipulators and earth moving machinery.

Brown, N. D.↗
NASA NTRS1981

Versatile modular scaffolds

Movable and fixed modular scaffolds can be tailored to most scaffolding needs by interconnecting only 4 basic structural elements: platforms, rails, vertical-support angles, and stiffener. Standard nuts and bolts are used to join elements, simplifying construction, and reducing costs. Scaffolds are rigid and can be made any length. They are stable on unlevel ground and can extend to well over 50 feet in height. Scaffolds allow for internal elevators and for wheels and air mounts so that same elements can be used for standing or movable scaffold.

Kerley, J.↗
NASA NTRS1979

Internal magnetospheric plasma flow

Experimental evidence indicates that there exist at least two separate circulation patterns within the magnetosphere which allow cold heavy plasmaspheric ions, which drift toward the dayside magnetopause, to be transported to the plasma sheet for acceleration and reinjection into the inner magnetosphere. The first of these results in the ions being transported over the polar regions in the plasma mantle. The mantle ultimately joins the plasma sheet at great distance in the tail via the lobe electric field. The second circulation pattern is embodied in the low latitude boundary layer. Recent data show that the extension of the low latitude boundary layer in the tail at 60 Earth radii turns inward to directly feed the plasma sheet. A means of estimating the fractional role played by each is to compare the electric potential drop across the low latitude boundary layer with the total cross tail convection electric potential. This was done for a set of tail crossings using ALSEP/SIDE data. The result is that the boundary layer contains about 20% of the potential drop across the tail.

Freeman, J. W.↗
NASA NTRS1980

Sintered silicon nitrode recuperator fabrication

The preliminary design and a demonstration of the feasibility of fabricating submodules of an automotive Stirling engine recuperator for waste heat recovery at 370 C are described. Sinterable silicon nitride (Sialon) tubing and plates were fabricated by extrusion and hydrostatic pressing, respectively, suitable for demonstrating a potential method of constructing ceramic recuperator-type heat exchangers. These components were fired in nitrogen atmosphere to 1800 C without significant scale formation so that they can be used in the as-fired condition. A refractory glass composition (Al2O3 x 4.5 CaO.MgO x 11SiO2) was used to join and seal component parts by a brazing technique which formed strong recuperator submodules capable of withstanding repeated thermal cycling to 1370 C. The corrosion resistance of these materials to Na2SO4 + NaCl carbon mixtures was also assessed in atmospheres of air, hydrogen and CO2-N2-H2O mixtures at both 870 C and 1370 C for times to 1000 hours. No significant reaction was observed under any of these test conditions.

Gatti, A.↗
NASA NTRS1980

Development of a composite geodetic structure for space construction, phase 1A

The development of a geodetic beam and beam builder for on orbit construction of large truss type space structures is discussed. The geodetic beam is a lightweight, open lattice structure composed of an equilateral gridwork of crisscrossing rods. The beam provides a high degree of stiffness and minimizes structural distortion, due to temperature gradients, through the incorporation of a new graphite and glass reinforced thermoplastic composite material with a low coefficient of thermal expansion. A low power consuming, high production rate, beam builder automatically fabricates the geodetic beams in space using rods preprocessed on Earth. Three areas of the development are focused upon; (1) geodetic beam designs for local attachment of equipment or beam to beam joining in a parallel or crossing configurations, (2) evaluation of long life pultruded rods capable of service temperatures higher than possible with the HMS/P1700 rod material, and (3) evalaution of high temperature joint encapsulant materials.

Source record↗
NASA NTRS1980

The geometry of the 37-tile microwave antenna support structure

The geometry of the support structure for a proposed parabolic shaped microwave antenna is examined. The surface of the antenna is comprised of 37 hexagonal shaped tiles, each connected to a truss module. The units are joined together to form a rigidized, faceted, concave parabolic surface. The geometry specifications are described through an explanation of the structural components which make up the antenna, a description of the coordinate system devised to identify the structure, and a presentation of the nondimensional results.

Finley, L. A.↗
NASA NTRS1980

Effect of hypokinesia on cardiac contractile function and nervous regulation of the heart

Longterm hypokinesia caused cardiac deadaptation in rabbits, which resulted in the diminishing of the left ventricular rate of contraction and relaxation, joined later by decreased vascular resistance. As a results, the ejection rate as well as stroke volume and cardiac output were normal. The decrease of the relaxation speed was more obvious at a high heart rate and results in shortening of the diastolic pause and diminishing of cardiac output. Hearts of the hypokinetic animals were characterized by normal maximal pressure developed by a unit of muccardial mass aorta clamping, decreased adrenoreactivity, and increased cholinoreactivity. This complex of changes is contrary to changes observed in adaptation to exercise, but is similar to changes observed in compensatory hypertrophy of the heart.

Meyerson, F. Z.↗
NASA NTRS1979

Economical processing of fiber-reinforced components with thermal expansion molding

The concept of economical fabrication of fiber-reinforced structural components is illustrated with an example of a typical control surface (aileron). The concept provides for fabricating struts, ribs, and a cover plate as an integral structure in a hardening device and then joining the closure cover plate mechanically. Fabrication of the integral structure is achieved by the 'thermal expansion molding' technique. The hardening pressure is produced by silicone rubber cores which expand under the influence of temperature. Test results are presented for several rubber materials as well as for various structural pieces. The technique is demonstrated extensively for an aileron, consisting of five ribs, struts, and a cover plate. Economically, for a large scale technical production of an aileron, cost savings of twenty-five percent can be realized compared to those for a sheet metal structure.

Schneider, K.↗
NASA NTRS1980

Effect of inflow control on inlet noise of a cut-on fan

The control of turbulence and other inflow disturbances in anechoic chambers for static turbofan noise studies was studied. A cut-on, high tip speed fan stage was acoustically tested with three configurations of an inflow control device in an anechoic chamber. Although this was a cut-on design, rotor inflow interaction appeared to be a much stronger source of blade passing tone radiated from the inlet than rotor stator interaction for the 1.6 mean rotor chord separation. Aft external suction applied to the area where the inflow control device joined the inlet produced a further reduction in blade passing tone, suggesting that disturbances in the forward flow on the outside of the inlet were superimposed on the inlet boundary layer and were a significant source of tone noise.

Woodward, R. P.↗
NASA NTRS1980

Ground/bonding for Large Space System Technology (LSST)

The influence of the environment and extravehicular activity remote assembly operations on the grounding and bonding of metallic and nonmetallic structures is discussed. Grounding and bonding philosophy is outlined for the electrical systems and electronic compartments which contain high voltage, high power electrical and electronic equipment. The influence of plasma and particulate on the system was analyzed and the effects of static buildup on the spacecraft electrical system discussed. Conceptual grounding bonding designs are assessed for capability to withstand high current arcs to ground from a high voltage conductor and electromagnetic interference. Also shown were the extravehicular activities required of the space station and or supply spacecraft crew members to join and inspect the ground system using manual on remote assembly construction.

Dunbar, W. G.↗
NASA NTRS1980

Cables and connectors for Large Space System Technology (LSST)

The effect of the environment and extravehicular activity/remote assembly operations on the cables and connectors for spacecraft with metallic and/or nonmetallic structures was examined. Cable and connector philosophy was outlined for the electrical systems and electronic compartments which contain high-voltage, high-power electrical and electronic equipment. The influence of plasma and particulates on the system is analyzed and the effect of static buildup on the spacecraft electrical system discussed. Conceptual cable and connector designs are assessed for capability to withstand high current and high voltage without danger of arcs and electromagnetic interference. The extravehicular activites required of the space station and/or supply spacecraft crew members to join and inspect the electrical system, using manual or remote assembly construction are also considered.

Dunbar, W. G.↗
NASA NTRS1979

Source structure errors in the synchronization of clocks by radio interferometry

Radio interferometry has the potential of synchronizing clocks across intercontinental distances with accuracies better than one nanosecond. One of the potential error sources in such determinations is the spatial structure of the natural radio sources that provide the reference signals. Due to their extent, the effective position of these sources can vary as a function of the length and orientation of the baseline vector joining the two antennas. If they are not corrected, such variations can lead to errors in clock synchronization. The theory of structure corrections is presented and specific examples are given to illustrate the nature and size of the effect.

Thomas, J. B.↗