SEARCH · Engineering Papers

Results for “Interface Problems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Low-loss Si-based Dielectrics for High Frequency Components of Superconducting Detectors

Silicon-based dielectric is crucial for many superconducting devices, including high-frequency transmission lines, filters, and resonators. Defects and contaminants in the amorphous dielectric and at the interfaces between the dielectric and metal layers can cause microwave losses and degrade device performance. Optimization of the dielectric fabrication, device structure, and surface morphology can help mitigate this problem. We present the fabrication of silicon oxide and nitride thin film dielectrics. We then characterized them using Scanning Electron Microscopy, Atomic Force Microscopy, and spectrophotometry techniques. The samples were synthesized using various deposition methods, including Plasma-Enhanced Chemical Vapor Deposition and magnetron sputtering. The film's morphology and structure were modified by adjusting the deposition pressure and gas flow. The resulting films were used in superconducting resonant systems consisting of planar inductors and capacitors. Measurements of the resonator properties, including their quality factor, were performed.

low-loss dielectrics↗

DOE OSTI2025

Cracking the failure of lithium batteries

Lithium batteries that use a solid electrolyte have the potential to improve safety and increase the amount of stored energy . This makes solid-state electrochemical cells a promising option for electric vehicles and wearable devices. However, nonuniform plating or stripping of lithium at the interface between an anode (negative electrode) and the electrolyte during charging and discharging leads to growth of detrimental lithium filaments (dendrites) that short-circuit the battery cell. This problem even occurs when the battery operates at small currents. The underlying mechanism of this failure is not well understood. On page 311 of this issue, Wang et al. (1) report that structural defects accumulate in the lithium metal anode under repeated charging and discharging at a small current. This is similar to mechanical fatigue that is observed over longer periods of intermittent straining of a material. Here, the observation could guide the design of lithium batteries with increased life span.

25 ENERGY STORAGE↗

DOE OSTI2023

Machine learning and LHC event generation

First-principle simulations are at the heart of the high-energy physics research program. They link the vast data output of multi-purpose detectors with fundamental theory predictions and interpretation. This review illustrates a wide range of applications of modern machine learning to event generation and simulation-based inference, including conceptional developments driven by the specific requirements of particle physics. New ideas and tools developed at the interface of particle physics and machine learning will improve the speed and precision of forward simulations, handle the complexity of collision data, and enhance inference as an inverse simulation problem.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2020

Interactions between Surface Chemistry and Gas-Phase Combustion: New Optical Tools for Probing Flame-Wall Interactions and the Heterogeneous Chemistry of Soot Growth and Oxidation in Flame. Final report

Some of the most stubborn and technologically critical problems in combustion are dominated by heterogeneous processes. While purely gas-phase combustion systems have been the subject of intense theoretical and experimental study, combustion phenomena occurring at interfaces are far less understood. This is partly caused by the lack of experimental approaches capable of probing locations very close to an interface, especially in the hostile environment of combustion. For laser-based optical techniques, measurements taken near interfaces are often complicated by laser scattering from the surface interfering with relatively weak signals. Further, for measurements intended to probe molecular species adsorbed at the interface between a gas-phase combustion reaction and a condensed phase material, signals are generally overwhelmed by contributions from the bulk phases, causing the small contribution from the interfacial molecular species to be undetectable. Our goal in this project has been to develop new optical tools for imaging chemical species, temperature, and surface species at and near surfaces or interfaces of relevance to combustion. We have placed focus on the development and refinement of ultrafast techniques such as femtosecond coherent Raman imaging and femtosecond/picosecond sum-frequency generation (SFG) scattering, as well as the models used to simulate such spectra under differing conditions of pressure and chemical speciation. The two physical phenomena initially targeted for study in this project were flamewall interactions, and the growth of particulates in flames.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1973

Refraction of acoustic duct waveguide modes by exhaust jets.

The refraction of acoustic duct waveguide modes emitted from the open end of a semiinfinite rectangular duct by a jet-like exhaust flow is studied theoretically. The problem is formulated as a Wiener-Hopf problem and is ultimately solved by an approximate method due to Carrier and Koiter. Continuity of transverse acoustic particle displacement and of acoustic pressure is assumed at the jet/still-air interface. The solution exhibits several features of the acoustics of moving media such as a source convection effect, zones of relative silence, and simple refraction. Plots of far-field directivity patterns are presented for several cases and show refraction effects to be important even at modest exhaust Mach numbers of order 0.3. Only subsonic exhaust Mach numbers are considered.

Mani, R.↗

NASA NTRS1974

An orthotropic laminate composite containing a layer with a crack

A laminate composite containing an orthotropic layer with a crack situated normal to the interfaces, and bonded to two orthotropic half-planes of dissimilar materials was considered. The solutions for two different classes of orthotropic materials are presented. In each case, the problem was first reduced to a system of dual integral equations, then to a singular integral equation which was subsequently solved numerically for the stress intensity factors at the tip of the crack. The effect of the material properties on the stress intensity factor was investigated. The generalized plane stress and the plane strain were treated simultaneously.

Arin, K.↗

NASA NTRS1983

Structural Optimization

Programming Structural Synthesis System (PROSSS) provides structural synthesis capability by combining SPAR and CONMIN computer programs with set of interface procedures. SPAR is large general-purpose finite-element structural-analysis program, and CONMIN is large general-purpose optimization program. User supplies two small problem-dependent programs to define design variables, constraints, and objective function.

Rogers, J. L., Jr↗

NASA NTRS1983

Numerical simulation of an electrothermal deicer pad

A numerical simulation is developed to investigate the removal of ice from composite aircraft blades by means of electrothermal deicing. The model considers one dimensional, unsteady state heat transfer in the composite blade-ice body. The heat conduction equations are approximated by using the Crank-Nicolson finite difference scheme, and the phase change in the ice layer is handled using the Enthalpy method. To solve the system of equations which result, Gauss-Seidel iteration is used. The simulation computes the temperature profile in the composite blade-ice body, as well as the movement of the ice-water interface, as a function of time. This information can be used to evaluate deicer performance. The simulation can also be used to solve a variety of other heat conduction problems involving composite bodies.

Marano, J. J.↗

NASA NTRS1985

SSME digital control design characteristics

To protect against a latent programming error (software fault) existing in an untried branch combination that would render the space shuttle out of control in a critical flight phase, the Backup Flight System (BFS) was chartered to provide a safety alternative. The BFS is designed to operate in critical flight phases (ascent and descent) by monitoring the activities of the space shuttle flight subsystems that are under control of the primary flight software (PFS) (e.g., navigation, crew interface, propulsion), then, upon manual command by the flightcrew, to assume control of the space shuttle and deliver it to a noncritical flight condition (safe orbit or touchdown). The problems associated with the selection of the PFS/BFS system architecture, the internal BFS architecture, the fault tolerant software mechanisms, and the long term BFS utility are discussed.

Mitchell, W. T.↗

NASA NTRS1987

Real time AI expert system for robotic applications

A computer controlled multi-robot process cell to demonstrate advanced technologies for the demilitarization of obsolete chemical munitions was developed. The methods through which the vision system and other sensory inputs were used by the artificial intelligence to provide the information required to direct the robots to complete the desired task are discussed. The mechanisms that the expert system uses to solve problems (goals), the different rule data base, and the methods for adapting this control system to any device that can be controlled or programmed through a high level computer interface are discussed.

Follin, John F.↗

NASA NTRS1988

The ATOMFT integrator - Using Taylor series to solve ordinary differential equations

This paper discusses the application of ATOMFT, an integration package based on Taylor series solution with a sophisticated user interface. ATOMFT has the capabilities to allow the implementation of user defined functions and the solution of stiff and algebraic equations. Detailed examples, including the solutions to several astrodynamics problems, are presented. Comparisons with its predecessor ATOMCC and other modern integrators indicate that ATOMFT is a fast, accurate, and easy method to use to solve many differential equation problems.

Berryman, Kenneth W.↗

NASA NTRS1989

A (13)C NMR analysis of the effects of electron radiation on graphite/polyetherimide composites

Initial investigations have been made into the use of high resolution nuclear magnetic resonance (NMR) for the characterization of radiation effects in graphite and Kevlar fibers, polymers, and the fiber/matrix interface in graphite/polyetherimide composites. Sample preparation techniques were refined. Essential equipment has been procured. A new NMR probe was constructed to increase the proton signal-to-noise ratio. Problem areas have been identified and plans developed to resolve them.

Ferguson, Milton W.↗

NASA NTRS1989

REDEX: The ranging equipment diagnostic expert system

REDEX, an advanced prototype expert system that diagnoses hardware failures in the Ranging Equipment (RE) at NASA's Ground Network tracking stations is described. REDEX will help the RE technician identify faulty circuit cards or modules that must be replaced, and thereby reduce troubleshooting time. It features a highly graphical user interface that uses color block diagrams and layout diagrams to illustrate the location of a fault. A semantic network knowledge representation technique was used to model the design structure of the RE. A catalog of generic troubleshooting rules was compiled to represent heuristics that are applied in diagnosing electronic equipment. Specific troubleshooting rules were identified to represent additional diagnostic knowledge that is unique to the RE. Over 50 generic and 250 specific troubleshooting rules have been derived. REDEX is implemented in Prolog on an IBM PC AT-compatible workstation. Block diagram graphics displays are color-coded to identify signals that have been monitored or inferred to have nominal values, signals that are out of tolerance, and circuit cards and functions that are diagnosed as faulty. A hypertext-like scheme is used to allow the user to easily navigate through the space of diagrams and tables. Over 50 graphic and tabular displays have been implemented. REDEX is currently being evaluated in a stand-alone mode using simulated RE fault scenarios. It will soon be interfaced to the RE and tested in an online environment. When completed and fielded, REDEX will be a concrete example of the application of expert systems technology to the problem of improving performance and reducing the lifecycle costs of operating NASA's communications networks in the 1990's.

Luczak, Edward C.↗

NASA NTRS1989

Structural optimization using synthetic functions

An efficient method for solving the structural optimization problem of defining member properties and responses in terms of design variables and calculated direct responses is proposed. The present approach provides the user with a simple means of interfacing design analysis models, as well as imposing constraints on functions which are not otherwise directly available. Results are presented for the examples of a three-bar truss, a 25-bar truss, the matching of calculated responses to measured responses, and the design of a rectangular beam.

Vanderplaats, G. N.↗

NASA NTRS1989

REDEX - The ranging equipment diagnostic expert system

Luczak, Edward C.↗

NASA NTRS1991

The effect of process conditions on the performance of epitaxial InP solar cells

Indium phosphide solar cells have a higher resistance to electron irradiation than Si or GaAs cells of comparable junction depth. As a result, there is much interest in the use of this material for space applications. Cells of this material were made in bulk InP by a number of techniques, including ion implantation, direct diffusion in sealed ampoules, and by open tube diffusion. However, it is generally considered that the epitaxial approach will be superior to all of these techniques. The epitaxy of InP is considerably more difficult than that of gallium arsenide, for a number of reasons. Perhaps the most important is the fact that the native oxides of Indium are extremely difficult to remove, as compared to that of Gallium. In addition, thermal treatments for the desorption of these oxides often result in the formation of phosphorus vacancies and free indium on the surface. Thus, inadequate sample preparation before epitaxy, poor reactor cleaning procedures, or poor transition procedures between the growth of successive layers, all give rise to trap phenomena and to high interface recombination velocities. Moreover, the lifetime of the grown material is dominated by the occurrence of native defects, so that it is a strong function of growth parameters. These problems are of special interest to the fabrication of solar cells, where long life-time, combined with the absence of traps, is highly desirable. A study of this problem is described using a non-invasive diagnostic technique which was developed.

Borrego, J. M.↗

NASA NTRS1992

VIEWCACHE: An incremental pointer-based access method for autonomous interoperable databases

One of biggest problems facing NASA today is to provide scientists efficient access to a large number of distributed databases. Our pointer-based incremental database access method, VIEWCACHE, provides such an interface for accessing distributed data sets and directories. VIEWCACHE allows database browsing and search performing inter-database cross-referencing with no actual data movement between database sites. This organization and processing is especially suitable for managing Astrophysics databases which are physically distributed all over the world. Once the search is complete, the set of collected pointers pointing to the desired data are cached. VIEWCACHE includes spatial access methods for accessing image data sets, which provide much easier query formulation by referring directly to the image and very efficient search for objects contained within a two-dimensional window. We will develop and optimize a VIEWCACHE External Gateway Access to database management systems to facilitate distributed database search.

Roussopoulos, N.↗

NASA NTRS1993

Controllability and observability measures for Craig-Bampton substructure representations

Measures of controllability and observability are derived for a Craig-Bampton substructure representation for which fixed interface modes and constraint modes are computed relative to control actuator locations. The measures facilitate modal ordering and act as an index of dynamic completeness for modal truncation. Example problems are given to demonstrate that the controllable and observable reduced substructure models have a greater accuracy in predicting closed loop pole locations, transfer functions and actuation commands than conventional normal mode models.

Triller, Michael J.↗