Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HEIGHTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

RSRA vertical drag test report

The Rotor Systems Research Aircraft (RSRA), because of its ability to measure rotor loads, was used to conduct an experiment to determine vertical drag, tail rotor blockage, and thrust augmentation as affected by ground clearance and flight velocity. The RSRA was flown in the helicopter configuration at speeds from 0 to 15 knots for wheel heights from 5 to 150 feet, and to 60 knots out of ground effect. The vertical drag trends in hover, predicted by theory and shown in model tests, were generally confirmed. The OGE hover vertical drag is 4.0 percent, 1.1 percent greater than predicted. The vertical drag decreases rapidly as wheel height is reduced, and is zero at a wheel height of 6 feet. The vertical drag also decreases with forward speed, approaching zero at sixty knots. The test data show the effect of wheel height and forward speed on thrust, gross weight capability, and power, and provide the relationships for power and collective pitch at constant gross weight required for the simulation of helicopter takeoffs and landings.

Flemming, R. J.↗
NASA NTRS1981

The Eulerian- and Lagrangian-mean flows induced by stationary, dissipating planetary waves

The Eulerian- and the Lagrangian-mean flows induced by stationary, dissipating planetary waves are discussed by employing a simple channel model on a beta-plane. It is assumed that the wave is excited by the bottom undulation and dissipated by Newtonian cooling with relaxation time alpha and by Rayleigh friction with (lambda)(alpha), lambda being constant. Three cases where lambda is equal to one are discussed: (1) the basic zonal wind U sub 0 and the dissipation rate alpha are both constant; (2) U sub 0 varies with height while alpha is constant; and (3) U sub 0 and alpha both vary with height. In case (1), the Eulerian- and the Lagrangian-mean fields are shown to depend on the difference between the dissipation scale-height and the density scale-height. In case (2) and case (3), it is shown that the results for case (1) are modified under slightly more realistic situations.

Takahashi, M.↗
NASA NTRS1981

Observations and models of inertial waves in the deep ocean

A study of the structure of the inertial peak in deep ocean kinetic energy is presented, based on records taken from Polymode arrays deployed in the western North Atlantic Ocean. Results are interpreted in terms of both local sources and turning point effects on internal waves generated at lower latitudes, and it is found that three classes of environment and their corresponding spectra emerge from peak height variations: (1) the 1500-m level near the Mid-Atlantic Ridge, with the greatest peak height of 18 dB; (2) the upper and deep ocean over rough topography and the deep ocean underneath the Gulf Stream, with the intermediate peak height of 11.5 dB; and (3) the deep ocean over smooth topography, with the lowest peak height of 7.5 dB. Using the globally valid wave functions obtained by Munk and Phillips (1968), frequency spectra near f are calculated numerically. The model is latitudinally dependent, with the frequency shift and bandwidth of the inertial peak decreasing with latitude.

Fu, L.-L.↗
NASA NTRS1983

Improved cloud motion wind vector and altitude assignment using VAS

A CO2 cloud tracking technique to determine simultaneous heights and velocities of cloud motion winds is presented. Using animated CO2 channel imagery from VAS (Visible Infrared Spin-Scan Radiometer Atmospheric Sounder), multi-level cloud situations are separated into high, middle and low level cloud motion wind vectors by the CO2 slicing method. The VAS CO2 channel radiometric values are used in the CO2 absorption method to assign quantitative heights to the cloud vectors; cloud top pressures are determined from the ratio of the deviations in cloud produced radiances and the corresponding clear air values for three CO2 channels in a radiative transfer equation formulation. Two case studies are presented that show CO2 cloud-motion wind vectors to be in good agreement with radiosonde wind observations and CO2 cloud heights to be within a 50 mb rms deviation of radiosonde, bispectral and stereo height determinations.

Menzel, W. P.↗
NASA NTRS1983

Thunderstorm top structure observed by aircraft overflights with an infrared radiometer

Thunderstorm top structure is examined with high spatial resolution radiometric data (visible and infrared) from aircraft overflights together with other storm views, including geosynchronous satellite observations. Results show that overshooting cumuliform towers appear as distinct cold areas in the high resolution, 11-micron IR aircraft images, but that the geosynchronous satellite observations significantly overestimate the thunderstorm-top IR brightness temperature, T(B), due to field of view effects. Profiles of cloud top height and T(B) across overshooting features indicate an adiabatic cloud surface lapse rate. However, one-dimensional cloud model results indicate that when comparing thunderstorm top temperature and height at different times or different storms, a temperature-to-height conversion of about 7 K/km is appropriate. Examination of mature storm evolution indicates that, during periods when the updraft is relatively intense, the satellite IR 'cold point' is aligned with the low-level radar reflectivity maximum, but during periods of updraft weakening and lowering cloud top heights, the satellite T(B) minimum occurs downwind with cirrus anvil debris. The growth period of a relatively weak cumulonimbus cluster is also examined with aircraft and satellite data.

Adler, R. F.↗
NASA NTRS1984

Wind streaks on Mars: Comparisons of production models with observations of bright streaks

To investigate the influence of crater size on martian wind streaks, the characteristics of bright streaks associated with craters ranging from approximately 100 m to 80 km in diameter were analyzed in several regions. The ratio of streak length to obstacle height (L/h) could be diagnostic of the relative effectiveness of different sized obstacles in disturbing near surface atmospheric flow; since the crater rim height to diameter relationship has not previously been determined for Mars, the rim heights of numerous craters were estimated from shadow measurements. In all areas studied, bright streak L/h values decrease with increasing h, indicating that smaller obstacles produce longer streaks relative to their height than do larger obstacles. Several models of bright streak production are used to explain this behavior are discussed.

Lee, S. W.↗
NASA NTRS1984

The precise computation of geoid undulation differences with comparison to results obtained from the global positioning system

Ellipsoidal height differences have been determined for 13 station pairs in the central Ohio region using measurements made with the Global Positioning System. This information was used to compute geoid undulation differences based on known orthometric heights. These differences were compared to gravimetrically-computed undulations (using a Stokes integration procedure, and least squares collocation having an internal r.m.s. agreement of plus or minus 1 cm in undulation differences). The two sets of undulation differences have an r.m.s. discrepancy of plus or minus 5 cm while the average station separation is of the order of 14 km. This good agreement suggests that gravimetric data can be used to compute accurate geoid undulation differences that can be used to convert ellipsoidal height differences obtained from GPS to orthometric height differences.

Engelis, T.↗
NASA NTRS1986

Observations of stratospheric aerosols associated with the El Chichon eruption

Lidar observations of aerosols were carried out at Aberystwyth between Nov. 1982 and Dec. 1985 using a frequency doubled and frequency tripled Nd/Yag laser and a receiver incorporating a 1 m diameter in a Newtonian telescope configuration. In analyses of the experimental data attention is paid to the magnitude of the coefficient relating extinction and backscatter, the choice being related to the possible presence of aerosols in the upper troposphere and the atmospheric densities employed in the normalisation procedure. The aerosol loading showed marked day to day changes in early months and an overall decay was apparent only after April 1983, this decay being consistent with an e sup -1 time of about 7 months. The general decay was accompanied by a lowering of the layer but layers of aerosols were shown intermittently at heights above the main layer in winter months. The height variations of photon counts corrected for range, or of aerosol backscatter ratio, showed clear signatures of the tropopause. A strong correlation was found between the heights of the tropopause identified from the lidar measurements and from radiosonde-borne temperature measurements. A notable feature of the observations is the appearance of very sharp height gradients of backscatter ratio which seem to be produced by differential advection.

Thomas, L.↗
NASA NTRS1985

Utilization of satellite cloud information to diagnose the energy state and transformations in extratropical cyclones

An important component of the research was a continuing investigation of the impact of latent release on extratropical cyclone development. Previous efforts to accomplish this task have focused on the energy balance and the vertical motion field of an intense winter extratropical cyclone over the United States. During this fiscal year researchers turned their attention to a more fundamental diagnostic variable, the height tendency. Central to this effort is the use of a modified form of the quasi-geostrophic height tendency equation, in which geostrophic wind components have been replaced by observed winds and a latent heat release term has been added. This methodology was adopted to produce a simple diagnostic model which retains the essential mechanisms of quasi-geostrophic theory but more faithfully describes observed wave development when the Rossby Number approaches and exceeds 0.5. Results to date indicate that the new model yields height tendencies that are superior to those obtained from the quasi-geostrophic formulation and are sufficiently close to the observed tendencies to be a useful tool for diagnosing the principle large-scale forcing mechanisms in th e700-300 mb layer. Of the three forcing terms included in the new model, vortity advection is in general dominant. The most persistent challenge to this dominance is made by the thermal advection. On the whole, latent heat release plays a secondary role. Finally, during the rapid intensification observed for this cyclone, all three processes complement each other in forcing height falls.

Smith, P. J.↗
NASA NTRS1987

The error associated with use of various forms of the divergence equation to diagnose geopotential and temperature

This study utilizes a model-generated data set to evaluate the errors associated with the diagnosis of geopotential height using three approximate forms of the divergence equation (DE). The DE was solved on the original sigma-coordinate surfaces of the model to exclude any error produced in the process of interpolating the data from observation points to the coordinate surface of the DE. An inviscid, nonlinear, divergent DE produced rms geopotential height errors as large as 3 m and rms temperature errors of over 26 C in the lower planetary boundary layer (PBL), with minimal errors above 800 mb. Elimination of the isobaric divergence in the velocity field caused additional height errors of 5-6 m and temperature errors of 0.4-1.2 C in the free troposphere. Use of a further-degraded DE without nonlinear terms caused height errors of 10-15 m in the upper troposphere with modestly increased temperature errors. Error fields at all levels had synoptic-scale features, with some mesoalpha structure. No spatial noise was apparent. Use of a temporal spectral filter to eliminate high-frequency modes from the model-generated data did not significantly influence the error associated with use of various forms of the DE.

Modica, George M.↗
NASA NTRS1987

Meteor observation by the Kyoto meteor radar

The Kyoto Meteor Radar is a monostatic coherent pulsed Doppler radar operating on the frequency of 31.57 MH. The system is computer controlled and uses radio interferometry for echo height determination. The antenna, an improvement, can be directed either to the north or the east. The system has been continuously collecting data on winds at meteor heights by radar observation. The meteor echo rate was also measured, the echo rate distribution with height and the daily variation in height integrated echo rate are discussed. Investigations of atmospheric tides are being pursued by cooperative observations. A novel approach to the study of gravity waves was attempted using the meteor radar which is able to detect the horizontal propagation of the waves by observing the changing phase through the region illuminated by the radar.

Kato, Susumu↗
NASA NTRS1987

Theoretical studies of the potential surface for the F - H2 greater than HF + H reaction

The F + H2 yields HF + H potential energy hypersurface was studied in the saddle point and entrance channel regions. Using a large (5s 5p 3d 2f 1g/4s 3p 2d) atomic natural orbital basis set, a classical barrier height of 1.86 kcal/mole was obtained at the CASSCF/multireference CI level (MRCI) after correcting for basis set superposition error and including a Davidson correction (+Q) for higher excitations. Based upon an analysis of the computed results, the true classical barrier is estimated to be about 1.4 kcal/mole. The location of the bottleneck on the lowest vibrationally adiabatic potential curve was also computed and the translational energy threshold determined from a one-dimensional tunneling calculation. Using the difference between the calculated and experimental threshold to adjust the classical barrier height on the computed surface yields a classical barrier in the range of 1.0 to 1.5 kcal/mole. Combining the results of the direct estimates of the classical barrier height with the empirical values obtained from the approximation calculations of the dynamical threshold, it is predicted that the true classical barrier height is 1.4 + or - 0.4 kcal/mole. Arguments are presented in favor of including the relatively large +Q correction obtained when nine electrons are correlated at the CASSCF/MRCI level.

Bauschlicher, Charles W., Jr.↗
NASA NTRS1988

Genesis of Atlantic Lows Experiment NASA Electra Boundary Layer Flights Data Report

The objective of this research was to obtain high resolution measurements of the height of the Marine Atmospheric Boundary Layer (MABL) during cold air outbreaks using an Airborne Lidar System. The research was coordinated with other investigators participating in the Genesis of Atlantic Lows Experiment (GALE). An objective computerized scheme was developed to obtain the Boundary Layer Height from the Lidar Data. The algorithm was used on each of the four flight days producing a high resolution data set of the MABL height over the GALE experiment area. Plots of the retrieved MABL height as well as tabular data summaries are presented.

Palm, Stephen P.↗
NASA NTRS1988

Satellite remote sensing and ozonesonde observation of ozone vertical profile and severe storm development

Two year ozonesonde data, January 1981 to December 1982, observed at four Canadian stations, and two-and-a-half year backscattered ultraviolet experiment data on the Nimbus-4 satellite, April 1970 to August 1972, observed over five U.S. stations, were used to study the relationship between the total ozone, vertical distribution of the ozone mixing ratio, height of half the total ozone, and the variation of local tropopause height. In view of the correlation between the variation of the tropopause height and the possible development of severe storms, a better understanding of the effect of the vertical distribution of the local ozone profile on the variation of the tropopause height can give considerable insight into the development of severe storms.

Hung, R. J.↗
NASA NTRS1990

Dynamic sea surface topography, gravity, and improved orbit accuracies from the direct evaluation of Seasat altimeter data

A gravitational model incorporating Seasat altimetry, surface gravimetry, and satellite tracking data has been determined in terms of global spherical harmonics complete to degree and order 50. This model, PGS-3337, uses altimeter data as a dynamic observation of the satellite's height above the sea surface. A solution for the ocean's dynamic topography is recovered simultaneously with the orbit parameters, gravity, and ocean tidal terms. The recovered dynamic topography reveals the global long wavelength circulation of the oceans with a resolution of 2000 km and is very similar to the mean upper ocean dynamic height derived from historical ship observations. The PGS-3337 geoid has an uncertainty of 60 cm rms globally but 25 cm rms over the ocean because of the altimeter measurements. Seasat orbits determined in this solution have an estimated accuracy for the radial position of 20 cm rms. The difference between the altimeter observed sea height and the geoid plus dynamic topography model is 30 cm rms. Contained in these residuals are the sea height variability, as well as errors from the geoid, orbits, tidal models, and altimeter range measurement. This performance level is 2 to 3 times better than that achieved with previous Goddard gravitational models.

Marsh, J. G.↗
NASA NTRS1991

The effect of clouds on the earth's radiation budget

The radiative fluxes from the Earth Radiation Budget Experiment (ERBE) and the cloud properties from the International Satellite Cloud Climatology Project (ISCCP) over Indonesia for the months of June and July of 1985 and 1986 were analyzed to determine the cloud sensitivity coefficients. The method involved a linear least squares regression between co-incident flux and cloud coverage measurements. The calculated slope is identified as the cloud sensitivity. It was found that the correlations between the total cloud fraction and radiation parameters were modest. However, correlations between cloud fraction and IR flux were improved by separating clouds by height. Likewise, correlations between the visible flux and cloud fractions were improved by distinguishing clouds based on optical depth. Calculating correlations between the net fluxes and either height or optical depth segregated cloud fractions were somewhat improved. When clouds were classified in terms of their height and optical depth, correlations among all the radiation components were improved. Mean cloud sensitivities based on the regression of radiative fluxes against height and optical depth separated cloud types are presented. Results are compared to a one-dimensional radiation model with a simple cloud parameterization scheme.

Ziskin, Daniel↗
NASA NTRS1991

Additions to Mars Global Reference Atmospheric Model (Mars-GRAM)

Three major additions or modifications were made to the Mars Global Reference Atmospheric Model (Mars-GRAM): (1) in addition to the interactive version, a new batch version is available, which uses NAMELIST input, and is completely modular, so that the main driver program can easily be replaced by any calling program, such as a trajectory simulation program; (2) both the interactive and batch versions now have an option for treating local-scale dust storm effects, rather than just the global-scale dust storms in the original Mars-GRAM; and (3) the Zurek wave perturbation model was added, to simulate the effects of tidal perturbations, in addition to the random (mountain wave) perturbation model of the original Mars-GRAM. A minor modification has also been made which allows heights to go below local terrain height and return realistic pressure, density, and temperature (not the surface values) as returned by the original Mars-GRAM. This feature will allow simulations of Mars rover paths which might go into local valley areas which lie below the average height of the present, rather coarse-resolution, terrain height data used by Mars-GRAM. Sample input and output of both the interactive and batch version of Mars-GRAM are presented.

Justus, C. G.↗
NASA NTRS1992

Additions to Mars Global Reference Atmospheric Model (MARS-GRAM)

Three major additions or modifications were made to the Mars Global Reference Atmospheric Model (Mars-GRAM): (1) in addition to the interactive version, a new batch version is available, which uses NAMELIST input, and is completely modular, so that the main driver program can easily be replaced by any calling program, such as a trajectory simulation program; (2) both the interactive and batch versions now have an option for treating local-scale dust storm effects, rather than just the global-scale dust storms in the original Mars-GRAM; and (3) the Zurek wave perturbation model was added, to simulate the effects of tidal perturbations, in addition to the random (mountain wave) perturbation model of the original Mars-GRAM. A minor modification was also made which allows heights to go 'below' local terrain height and return 'realistic' pressure, density, and temperature, and not the surface values, as returned by the original Mars-GRAM. This feature will allow simulations of Mars rover paths which might go into local 'valley' areas which lie below the average height of the present, rather coarse-resolution, terrain height data used by Mars-GRAM. Sample input and output of both the interactive and batch versions of Mars-GRAM are presented.

Justus, C. G.↗