Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Geologic data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Slip and Dilation Tendency Analysis of the Patua Geothermal Area

Critically stressed fault segments have a relatively high likelihood of acting as fluid flow conduits (Sibson, 1994). As such, the tendency of a fault segment to slip (slip tendency; Ts; Morris et al., 1996) or to dilate (dilation tendency; Td; Ferrill et al., 1999) provides an indication of which faults or fault segments within a geothermal system are critically stressed and therefore likely to transmit geothermal fluids. The slip tendency of a surface is defined by the ratio of shear stress to normal stress on that surface: Ts = T / on (Morris et al., 1996). Dilation tendency is defined by the stress acting normal to a given surface: Td = (o1-on) / (o1-o3) (Ferrill et al., 1999). Slip and dilation were calculated using 3DStress (Southwest Research Institute). Slip and dilation tendency are both unitless ratios of the resolved stresses applied to the fault plane by ambient stress conditions. Values range from a maximum of 1, a fault plane ideally oriented to slip or dilate under ambient stress conditions to zero, a fault plane with no potential to slip or dilate. Slip and dilation tendency values were calculated for each fault in the focus study areas at, McGinness Hills, Neal Hot Springs, Patua, Salt Wells, San Emidio, and Tuscarora on fault traces. As dip is not well constrained or unknown for many faults mapped in within these we made these calculations using the dip for each fault that would yield the maximum slip tendency or dilation tendency. As such, these results should be viewed as maximum tendency of each fault to slip or dilate. The resulting along-fault and fault-to-fault variation in slip or dilation potential is a proxy for along fault and fault-to-fault variation in fluid flow conduit potential. Stress Magnitudes and directions Stress field variation within each focus area was approximated based on regional published data and the world stress database (Hickman et al., 2000; Hickman et al., 1998 Robertson-Tait et al., 2004; Hickman and Davatzes, 2010; Davatzes and Hickman, 2006; Blake and Davatzes 2011; Blake and Davatzes, 2012; Moeck et al., 2010; Moos and Ronne, 2010 and Reinecker et al., 2005) as well as local stress information if applicable. For faults within these focus systems we applied either a normal faulting stress regime where the vertical stress (sv) is larger than the maximum horizontal stress (shmax) which is larger than the minimum horizontal stress (sv>shmax>shmin) or strike-slip faulting stress regime where the maximum horizontal stress (shmax) is larger than the vertical stress (sv) which is larger than the minimum horizontal stress (shmax >sv>shmin) depending on the general tectonic province of the system. Based on visual inspection of the limited stress magnitude data in the Great Basin we used magnitudes such that shmin/shmax = .527 and shmin/sv= .46, which are consistent with complete and partial stress field determinations from Desert Peak, Coso, the Fallon area and Dixie valley (Hickman et al., 2000; Hickman et al., 1998 Robertson-Tait et al., 2004; Hickman and Davatzes, 2011; Davatzes and Hickman, 2006; Blake and Davatzes 2011; Blake and Davatzes, 2012). Slip and dilation tendency analysis for the Patua geothermal system was calculated based on faults mapped in the Hazen Quadrangle (Faulds et al., 2011). Patua lies near the margin between the Basin and Range province, which is characterized by west-northwest directed extension and the Walker Lane province, characterized by west-northwest directed dextral shear. As such, the Patua area likely has been affected by tectonic stress associated with either or both of stress regimes over geologic time. In order to characterize this stress variation we calculated slip tendency at Patua for both normal faulting and strike slip faulting stress regimes. Based on examination of regional and local stress data (as explained above) we applied at shmin direction of 105 to Patua. Whether the vertical stress (sv) magnitude is larger than th...

15 GEOTHERMAL ENERGY↗

Brittle failure of rock: A review and general linear criterion

A failure criterion typically is phenomenological since few models exist to theoretically derive the mathematical function. Indeed, a successful failure criterion is a generalization of experimental data obtained from strength tests on specimens subjected to known stress states. For isotropic rock that exhibits a pressure dependence on strength, a popular failure criterion is a linear equation in major and minor principal stresses, independent of the intermediate principal stress. A general linear failure criterion called Paul-Mohr-Coulomb (PMC) contains all three principal stresses with three material constants: friction angles for axisymmetric compression $\phi$ c and extension $\phi$ e and isotropic tensile strength V 0 . PMC provides a framework to describe a nonlinear failure surface by a set of planes “hugging” the curved surface. Brittle failure of rock is reviewed and multiaxial test methods are summarized. Equations are presented to implement PMC for fitting strength data and determining the three material parameters. A piecewise linear approximation to a nonlinear failure surface is illustrated by fitting two planes with six material parameters to form either a 6- to 12-sided pyramid or a 6- to 12- to 6-sided pyramid. Finally, the particular nature of the failure surface is dictated by the experimental data.

58 GEOSCIENCES↗

Microbial Community Composition in Deep‐Subsurface Reservoir Fluids Reveals Natural Interwell Connectivity

Abstract The identification of natural fractures and the wells they connect is crucial for the development of geological reservoirs because it may have an important impact on reservoir model construction and hydraulic fracture propagation. In this study we investigated the use of a novel data source, the microbial community composition in the reservoir formation fluids, for identification of interwell connectivity caused by natural fractures. We verified this concept at a newly developed mesoscale enhanced geothermal system (EGS) field testbed located 4,850 ft (1,478 m) beneath ground surface at the Sanford Underground Research Facility in Lead, SD. Fluids produced at or near the EGS testbed were sampled and subjected to high‐throughput 16S rRNA gene amplicon sequencing to analyze the microbial community profile therein. Despite the typically substantial heterogeneity across the community profiles of samples spatially distributed (10 m to 1.9 km apart) throughout the site, samples from two wells at the EGS testbed showed highly similar microbial community composition, suggesting the two wells intersected the same natural fracture. This evidence of natural connectivity between the two wells at the EGS testbed was later corroborated by core log analysis and sewer camera surveys into the boreholes. Besides the field case described in this study, microbial community composition as a reservoir diagnostic tool would be applicable in a much broader context such as unconventional hydrocarbon exploitation, groundwater reservoir characterization, and environmental remediation, adding valuable “hard” data capable of pinpointing the origins of fluids unambiguously.

Zhang, Yuran↗

On an Extensive Late Hydrologic Event in Gale Crater as Indicated by Water‐Rich Fracture Halos

Abstract We analyze spatially pervasive, light‐toned “halos” associated with fractures in a sedimentary unit (Stimson) of Gale crater, Mars, and report a similar network of halos discovered in a separate geologic group (Bradbury). Through a dedicated active neutron measurement campaign, we provide independent confirmation of the water‐rich nature of these features. Together with mineralogical and geochemical data, these features are consistent with abundant hydrated amorphous silica (opal‐A). We suggest that the mineral and amorphous assemblages are indicative of formation under low‐temperature and predominantly low‐pH conditions (passive silica enrichment) with minor contribution of silica (active silica enrichment) from adjacent units. We show that there is significant amorphous silica in the array of sedimentary rocks in Gale crater, allowing them to play a role in an active silica enrichment phase of halo formation. We suggest that the involved alteration event was short lived and our finding of vast halo networks in a distant, older unit implies a more vast network of hydrologic subsurface conduits than previously known. This relatively recent subsurface hydrologic system was present long after the transition from a warm and wet to a cold and dry Martian environment, extending the habitability conditions on Mars to an epoch that is generally considered not favorable for life on the surface. Finally, our bulk H quantification of these features, which ranges from ∼3–6 wt% H 2 O‐equivalent‐H, suggests that the amorphous material in halos hosts ample supplies of readily released water, making them a considerable resource at the otherwise dry Martian equator.

Gabriel, Travis S. J.↗

Surface interfacial analysis of simulant high level nuclear waste glass dissolved in synthetic cement solutions

Abstract The corrosion mechanisms and kinetics of a Mg-rich alkali aluminoborosilicate glass simulating UK high-level waste (CaZn28) were investigated upon dissolution in synthetic cement solutions. Dissolution varied as a function the different pH and alkali/alkaline earth content of each cement solution. High resolution microscopy and spectroscopy techniques ascertained the nature of the interface between the glass and the cement solutions. TEM-EDS revealed alkali- and alkaline earth-rich silica gels, into which K, Ca and Mg were incorporated. TEM-SAED, combined with synchrotron micro-focus XRD, identified the ubiquitous precipitation of the Mg-aluminate layered double hydroxide phase, meixnerite (Mg 6 Al 2 (OH) 18 ·4H 2 O), in addition to goethite (FeOOH) and crystalline silica. The C-S-H phase, tobermorite (Ca 5 Si 6 O 16 (OH) 2 ·4H 2 O), was identified in the most Ca-rich solution only. These data give insight to the role of alkali/alkaline earth-rich solutions in the dissolution or radioactive waste glasses, of importance to the final disposition in a geological disposal facility.

Corkhill, Claire L. (ORCID:0000000274883219)↗

AmeriFlux US-ADR Amargosa Desert Research Site (ADRS)

This is the AmeriFlux version of the carbon flux data for the site US-ADR Amargosa Desert Research Site (ADRS). Site Description - This tower is located at the Amargosa Desert Research Site (ADRS). The U.S. Geological Survey (USGS) began studies of unsaturated zone hydrology at ADRS in 1976. Over the years, USGS investigations at ADRS have provided long-term "benchmark" information about the hydraulic characteristics and soil-water movement for both natural-site conditions and simulated waste-site conditions in an arid environment. The ADRS is located in a creosote-bush community adjacent to disposal trenches for low-level radioactive waste.

Moreo, Michael↗

A Comprehensive Earthquake Catalog for Iraq in Terms of Moment Magnitude

A comprehensive earthquake catalog was compiled for Iraq and neighboring areas as part of a broader probabilistic seismic–hazard assessment project. The Iraq Seismic Network (ISN) was established in 1976 and became operational in the early 1980s. However, recording and reporting of seismic data has been intermittent in Iraq. Hence, events were collected from various sources, including the ISN when available, International Seismological Centre (ISC), European–Mediterranean Seismological Centre, U.S. Geological Survey Centennial Catalog, Global Centroid Moment Tensor solutions, and Ambraseys’ extensive work on cataloging of instrumental era earthquakes in the Middle East (e.g., Ambraseys, 1978, 2001, 2009). We supplement these with new direct moment magnitude calculations based on coda calibration technique. For many of the larger events in the catalog, more than one magnitude is available. Directly calculated moment magnitudes (M w ) were favored, followed by body–wave magnitude (mb) obtained from the ISC. Where no directly calculated M w was available, other magnitude scales were converted to M w using relationships compatible with the local catalog. In conclusion, the resulting earthquake catalog spans from the year 1900 until the end of 2009, covers the region bounded by 26°–40° N latitudes and 36°–51° E longitudes, and includes more than 18,000 earthquakes, of which roughly 4000 are M w 4.0 or larger.

58 GEOSCIENCES↗

Project Task Statement 2 to Umbrella Cooperative Research and Development Agreement between National Energy Technology Laboratory and Ramaco Carbon [Abstract]

NETL and Ramaco will collaborate to characterize domestic coal, beneficiated coal, and coal byproducts to evaluate these materials for rare earth element (REE) content and ease of extraction. Ramaco will provide samples of coal, beneficiated coal, and coal byproducts to NETL, as well as provide research expertise on coal extraction and processing. NETL will characterize these feedstocks using the chemical/physical methods being utilized in its research laboratories. The objectives of this project are: identify promising coal-related REE reserves by testing and analysis of core samples from coal bearing formations; provide insights and expertise into opportunities for the extraction of REEs and other value-added products from domestic coal; and collect data that will be used to create quantitative modeling tools for predicting the likelihood of successful prospecting for REEs in coal, beneficiated and processed coal, and related geologic formation.

01 COAL, LIGNITE, AND PEAT↗

Site Integration and Regulatory Considerations for a Nuclear Power Plant Colocated with Industrial Facilities: Colocation Studies for a Petroleum Refinery, Methanol Plant, and Wood Pulp Plant

This research explores the colocation of nuclear power plants (NPPs) with industrial applications. Three existing industrial sites were considered to demonstrate the siting process and illuminate technological gaps for future work. The three applications demonstrated for colocation here are a petroleum refinery, a methanol production plant, and a pulp and paper plant. This study uses a modified version of the EPRI siting criteria to explore the geological and demographic characteristics of the location of the current industrial site, as well as exploring external hazards from the industrial plant and its surrounding land use. Data was collected from public databases to estimate site characteristics. We then discuss how the site characteristics may impact the ability to colocate an NPP with an industrial application. The application site and 5 additional sites were explored for each application to give a general indication of the siting implications for an NPP in each area. The hazards for each industrial application was also explored to determine how colocation may impact reactor safety. The following gaps have been identified and should be explored in future research on colocation of NPPs with petroleum refineries, methanol plants, and pulp and paper plants: - There is a variety of industrial use, hazards, and pipelines in the surrounding area. A more thorough review of these hazards should be considered for colocation. - In general, the whole region around some applications seems to have softer soil, with implications for large site preparation costs. Further site investigations should prioritize looking into the geotechnical conditions. - Applications along coastlines are susceptible to flooding and hurricanes. The benefits of colocation should be weighed against the potential design implications. - The benefits of natural gas pipeline infrastructure in place should be explored further. If heat supply from the NPP is not required or not feasible due to the distance between the NPP and the application, there may be an opportunity to supply hydrogen to the plant through an existing pipeline. - Because there are several collocated industrial plants in the regions for the refinery and methanol plant, the benefits of sharing resources from the NPP should be explored further. This may open up additional sites for colocation. The following knowledge gaps were identified for the colocation of NPPs with these three industries, and industrial applications in general. These gaps are: - While the STAND tool contains many important characteristics for the reactor siting process, it is not calibrated for the colocation of NPPs with industrial facilities. - There are aspects of both the NPP and industrial application that need to be quantified for a siting analysis. Particularly, we need to understand the water intake requirements for NPPs and each application. - Further work may focus on adapting the STAND site comparison methodology to comparison of sites for co-location. This will involve using the data documented in this report as a starting point and performing a comprehensive and quantitative comparison. - Without spending significant resources, it would be impossible to gather data for each site to evaluate all aspects of siting. One approach to finding data and understanding its implications to siting is looking at FSARs for existing plants. For example, most sites considered in this study have small Vs30 values, indicating soft soil. However, there are NPPs located in the vicinity of most of the sites (e.g., Waterford Steam Electric Station near New Orleans) and reviewing available site characteristics and geotechnical data for these NPPs, might provide further information for siting. - The siting analysis in this study indicates that colocation of the NPP with the industrial site could be difficult based on external hazards, cooling requirements, weather, or population. We need to determine the impact of distance between the two facilities on cost and quality of energy transport. - This study did not touch on socioeconomic impacts for NPP colocation with industrial facilities. The input-output analysis methodology could be applied to the communities referenced in this study to determine the socioeconomic impact of these projects. - Similarly, the impacts of colocation on emergency planning was not explored in this study. The impacts on emergency planning infrastructure are somewhat related to the socioeconomic impacts, and could be explored using a similar methodology. - This study also did not address physical and cybersecurity, which will be important aspects of co-location [ref] . Cybersecurity will be important, regardless of the distance, but physical security will be important if the facilities are located very closely. Physical security might also be important for the steam lines between the plants, unless they are determined to be non-safety significant. - In many site l

08 HYDROGEN↗

Site Integration and Regulatory Considerations for an NPP Colocated with a Petroleum Refinery, Methanol Plant, and Wood Pulp Plant

This research explores the colocation of nuclear power plants (NPPs) with industrial applications. Three existing industrial sites were considered to demonstrate the siting process and illuminate technological gaps for future work. The three applications demonstrated for colocation here are a petroleum refinery, a methanol production plant, and a pulp and paper plant. This study uses a modified version of the EPRI siting criteria to explore the geological and demographic characteristics of the location of the current industrial site, as well as exploring external hazards from the industrial plant and its surrounding land use. Data was collected from public databases to estimate site characteristics. We then discuss how the site characteristics may impact the ability to colocate an NPP with an industrial application. The application site and 5 additional sites were explored for each application to give a general indication of the siting implications for an NPP in each area. The hazards for each industrial application was also explored to determine how colocation may impact reactor safety. The following gaps have been identified and should be explored in future research on colocation of NPPs with petroleum refineries, methanol plants, and pulp and paper plants: - There is a variety of industrial use, hazards, and pipelines in the surrounding area. A more thorough review of these hazards should be considered for colocation. - In general, the whole region around some applications seems to have softer soil, with implications for large site preparation costs. Further site investigations should prioritize looking into the geotechnical conditions. - Applications along coastlines are susceptible to flooding and hurricanes. The benefits of colocation should be weighed against the potential design implications. - The benefits of natural gas pipeline infrastructure in place should be explored further. If heat supply from the NPP is not required or not feasible due to the distance between the NPP and the application, there may be an opportunity to supply hydrogen to the plant through an existing pipeline. - Because there are several collocated industrial plants in the regions for the refinery and methanol plant, the benefits of sharing resources from the NPP should be explored further. This may open up additional sites for colocation. The following knowledge gaps were identified for the colocation of NPPs with these three industries, and industrial applications in general. These gaps are: - While the STAND tool contains many important characteristics for the reactor siting process, it is not calibrated for the colocation of NPPs with industrial facilities. - There are aspects of both the NPP and industrial application that need to be quantified for a siting analysis. Particularly, we need to understand the water intake requirements for NPPs and each application. - Further work may focus on adapting the STAND site comparison methodology to comparison of sites for co-location. This will involve using the data documented in this report as a starting point and performing a comprehensive and quantitative comparison. - Without spending significant resources, it would be impossible to gather data for each site to evaluate all aspects of siting. One approach to finding data and understanding its implications to siting is looking at FSARs for existing plants. For example, most sites considered in this study have small Vs30 values, indicating soft soil. However, there are NPPs located in the vicinity of most of the sites (e.g., Waterford Steam Electric Station near New Orleans) and reviewing available site characteristics and geotechnical data for these NPPs, might provide further information for siting. - The siting analysis in this study indicates that colocation of the NPP with the industrial site could be difficult based on external hazards, cooling requirements, weather, or population. We need to determine the impact of distance between the two facilities on cost and quality of energy transport. - This study did not touch on socioeconomic impacts for NPP colocation with industrial facilities. The input-output analysis methodology could be applied to the communities referenced in this study to determine the socioeconomic impact of these projects. - Similarly, the impacts of colocation on emergency planning was not explored in this study. The impacts on emergency planning infrastructure are somewhat related to the socioeconomic impacts, and could be explored using a similar methodology. - This study also did not address physical and cybersecurity, which will be important aspects of co-location [ref] . Cybersecurity will be important, regardless of the distance, but physical security will be important if the facilities are located very closely. Physical security might also be important for the steam lines between the plants, unless they are determined to be non-safety significant. - In many site l

08 - HYDROGEN↗

Incremental Clustering Algorithm For Earth Science Data Mining

Remote sensing data plays a key role in understanding the complex geographic phenomena. Clustering is a useful tool in discovering interesting patterns and structures within the multivariate geospatial data. One of the key issues in clustering is the specication of appropriate number of clusters, which is not obvious in many practical situations. In this paper we provide an extension of G-means algorithm which automatically learns the number of clusters present in the data and avoids over estimation of the number of clusters. Experimental evaluation on simulated and remotely sensed image data shows the effectiveness of our algorithm.

58 GEOSCIENCES↗

The Modular Borehole Monitoring Program. A research program to optimize well-based monitoring for geologic carbon sequestration

Understanding the impacts caused by injection of large volumes of CO 2 in the deep subsurface necessitates a comprehensive monitoring strategy. While surface-based and other remote geophysical methods can provide information on the general morphology of a CO 2 plume, verification of the geochemical conditions and validation of the remote sensing data requires measurements from boreholes that penetrate the storage formation. Unfortunately, the high cost of drilling deep wellbores and deploying instrumentation systems constrains the number of dedicated monitoring borings as well as limits the technologies that can be incorporated in a borehole completion. The objective of the Modular Borehole Monitoring (MBM) Program was to develop a robust suite of well-based tools optimized for subsurface monitoring of CO 2 that could meet the needs of a comprehensive well-based monitoring program. It should have enough flexibility to be easily reconfigured for various reservoir geometries and geologies. The MBM Program sought to provide storage operators with a turn-key fully engineered design that incorporated key technologies, function over the decades long time-span necessary for post-closure reservoir monitoring, and meet industry acceptable risk profiles for deep-well installations. While still within the conceptual design phase of the MBM program, the SECARB Anthropogenic Test in Citronelle, Alabama, USA was identified as a deployment site for our engineered monitoring systems. The initial step in designing the Citronelle MBM system was to down-select from the various monitoring tools available to include technologies that we considered essential to any program. Monitoring methods selected included U-tube geochemical sampling, discrete quartz pressure and temperature gauges, an integrated fibre-optic bundle consisting of distributed temperature and heat-pulse sensing, and a sparse string of conventional 3C-geophones. While not originally planned within the initial MBM work scope, the fibre-optic cable was able to also be used for the emergent technology of distributed acoustic sensing. The MBM monitoring string was installed in March, 2012. To date, the Citronelle MBM instruments continue to operate reliably. Results and lessons learned from the Citronelle MBM deployment are addressed along with examples of data being collected.

54 ENVIRONMENTAL SCIENCES↗

CO 2 Wettability of Sandstones: Addressing Conflicting Capillary Behaviors

Understanding the capillary and wetting behavior of supercritical CO 2 (scCO 2 ) and brine in reservoir rocks is essential for reliable predictions of geologic carbon storage, as it strongly impacts CO 2 migration and residual trapping in the reservoir. The wetting state of such systems can be assessed through laboratory measurements of the capillary pressure characteristic curve. Yet, while some studies reported consistent scaling with strongly water wet systems, some others observed deviations from hydrophilic conditions. We present core-flooding drainage capillary pressure measurements using scCO 2 /water and N 2 /water on a Berea sandstone, untreated, then fired, and then exposed to scCO 2 for 28 days. The aim is to explore the impact of firing and longer exposure to scCO 2 , two potential sources for variability in experimental observations, on capillarity and wettability. The results show excellent agreement among all the core-flooding capillary pressure data, suggesting no change in wetting state due to firing or longer exposure.

58 GEOSCIENCES↗

Kimberlina 1.2 Velocity Models and Seismic Data

Kimberlina 1.2 Velocity model and synthetic seismic data, produced in collaboration of teams at the National Energy Technology Laboratory, Los Alamos National Laboratory, and Lawrence Livermore National Laboratory through the National Risk Assessment Partnership. Data is associated with the following publication: Zheng Zhou, Youzuo Lin, Zhongping Zhang, Yue Wu, Zan Wang, Robert Dilmore, and George Guthrie, "A Data-Driven CO2 Leakage Detection Using Seismic Data and Spatial-Temporal Densely Connected Convolutional Neural Networks," International Journal of Greenhouse Gas Control, Vol 90, 2019. The Kimberlina 1.2 Velocity models were produced by Zan Wang, Robert Dilmore, William Harbert, and Lianjie Huang at NETL. The following citations are directly related to the creation of the velocity models: Wang, Z. Harbert, W., Dilmore, R., Huang, L. Modeling of time-lapse seismic monitoring using CO2 leakage simulations for a model CO2 storage site with realistic geology: Application in assessment of early leak-detection capabilities. International Journal of Greenhouse Gas Control. V. 76, September 2018, Pages 39-52. https://doi.org/10.1016/j.ijggc.2018.06.011 Wang, Z., Dilmore, R., Harbert, W. Inferring CO2 saturation from synthetic surface seismic and downhole monitoring data using machine learning for leakage detection at CO2 sequestration sites. International Journal of Greenhouse Gas Control, V. 100, September 2020. https://doi.org/10.1016/j.ijggc.2020.103115 The velocity models were built based on the Kimberlina 1.2 aquifer impact data which is associated with the following publications: Buscheck, T.A., Mansoor, K., Yang, X., Wainwright, H., and Carroll, S. (2019). Downhole pressure and chemical monitoring for CO2 and brine leak detection in aquifers above a CO2 storage reservoir. International Journal of Greenhouse Gas Control. 91. 102812. 10.1016/j.ijggc.2019.102812. Xianjin Yang, Thomas A. Buscheck, Kayyum Mansoor, Zan Wang, Kai Gao, Lianjie Huang, Delphine Appriou, Susan A. Carroll, Assessment of geophysical monitoring methods for detection of brine and CO2 leakage in drinking water aquifers, International Journal of Greenhouse Gas Control, Volume 90, 2019, 102803, ISSN 1750-5836, https://doi.org/10.1016/j.ijggc.2019.102803 The synthetic seismic data was produced by Youzuo Lin and team at LANL, and are associated with the following citations: Jordan, P. D., and J. L. Wagoner. Characterizing Construction of Existing Wells to a CO2 Storage Target: The Kimberlina Site, California. Zheng Zhou, Youzuo Lin, Zhongping Zhang, Yue Wu, Zan Wang, Robert Dilmore, and George Guthrie, "A Data-Driven CO2 Leakage Detection Using Seismic Data and Spatial-Temporal Densely Connected Convolutional Neural Networks," International Journal of Greenhouse Gas Control, Vol 90, 2019.

CO2 Leakage↗

Geothermal Reservoir Simulation Results in support of Feasibility Study of Direct District Heating for the Cornell Campus Utilizing Deep Geothermal Energy

This dataset contains input data, code, ReadMe files, output data, and figures that summarize the results of a stochastic analysis of geothermal reservoir production from two potential geothermal reservoirs that were evaluated for the Cornell University Deep Direct-Use project. These potential reservoirs are the Trenton-Black River (TBR) from 2.27-2.3 km depth, and basement rocks from 3.0-3.5 km depth and 3.5-4.0 km depth. Several utilization scenarios consisting of different injection fluid temperatures and flow rates were evaluated for each reservoir. Uncertainty in geologic properties, thermal properties, economic costs, and utilization efficiencies were evaluated using a Monte Carlo analysis of the reservoir simulations. Some reservoir simulations of the TBR were completed using the TOUGH2 software, as implemented in PetraSIM. The PetraSIM run files and associated data are provided with this submission. All other reservoir simulations were completed using the GEOPHIRES software, with some modifications to complete the uncertainty analyses. ReadMe files that describe additions to GEOPHIRES, the GEOPHIRES input data, and the output data are all provided, and references are provided to the code repository. Figures that summarize the reservoir heat production, temperature drawdown, and the probability of meeting targeted building heating demands with the produced heat and fluid temperatures are provided.

15 GEOTHERMAL ENERGY↗

Dynamic coevolution of baseflow and multiscale groundwater flow system during prolonged droughts

Field and numerical studies suggest that baseflow is composed of waters from a spectrum of groundwater flow paths termed the Groundwater Flow System (GWFS) – from shallow hillslope contributions to watershed-scale deep circulation originating in headwaters and discharging into lowland rivers. Here, we explore the evolution of the GWFS under prolonged droughts to understand its dynamics and multiscale nature, and to elucidate its role in baseflow generation and recession at the watershed scale. In this work, we consider three drought scenarios of varying severity and simulate groundwater flow in a 2-D cross-section of an idealized watershed with deep permeable bedrock, tracking the evolution of flow paths, baseflow, and residence times during the recession process. We find that baseflow generation at different drainage stages, and within different subwatersheds, is influenced distinctly by flow paths of different scales, depending on the relative strength of the flow paths and the position of the subwatersheds relative to the recharge/discharge zones of the deeper watershed-scale groundwater circulation. Despite having the same local relief, geology, and climate, baseflow from each subwatershed has a distinct recession behavior and time-dependent residence time distribution. Also, the hydraulic and transport characteristics of baseflow generation co-evolve and are strongly affected by the connection state of the water table to subwatersheds. These findings suggest that asynchrony and dissimilarity of baseflow generation from hillslopes under the impact of the watershed-scale groundwater flow, and interactions with local-scale and intermediate-scale groundwater flow, must be taken into account when interpreting baseflow recession data and building conceptual baseflow models at the watershed scale.

54 ENVIRONMENTAL SCIENCES↗

A probabilistic application of oil and gas data for exploration stage geothermal reservoir assessment in the Appalachian Basin

Geothermal energy is a renewable, widespread, baseload energy source that has the potential to supply a large portion of the world’s energy needs. High development risk, specifically high drilling costs combined with uncertainty in subsurface flow properties, have hampered growth of geothermal energy development. One option to reduce subsurface risk is to target locations where reservoir data are already available, including sedimentary basins where there has been extensive hydrocarbon production. Sedimentary basins are widespread and often have suitable geothermal gradients. This chapter presents a low-cost methodology that can be used at the pre-drilling exploration phase of a low-temperature geothermal project to predict the location of high-productivity and low-risk reservoirs, applied to a case study of the Appalachian Basin in the eastern United States. Because only averaged reservoir data were available for analysis, the technique uses a Monte Carlo simulation of the Reservoir Flow Capacity (RFC) and Reservoir Productivity Index (RPI) for over 1800 individual reservoirs, using liquid water or supercritical carbon dioxide (sCO 2 ) as the reservoir fluid. RFC is used as an initial screening tool to identify high-priority geologic formations and reservoirs. Here our results indicate that 99% of the reservoirs in the basin are of insufficient quality for geothermal heat production with water as the assumed fluid and without using stimulation technologies associated with Enhanced Geothermal Systems (EGS). RPI is also used as an alternative metric to identify high-productivity reservoirs. When comparing the RPI results to natural gas production volumes from several selected reservoirs, the predicted RPI proves to be a good estimate of flow potential for porous reservoirs, but overestimates flow by a factor of three for fractured or vuggy reservoirs. A greater uncertainty ought to be utilized when applying the RPI equation to non-porous media, therefore we recommend utilizing the RPI metric when higher resolution data are available for analysis. This methodology can be utilized in other basins that have experienced hydrocarbon exploration and production, to highlight low-risk reservoirs or geologic formations for further geothermal development.

15 GEOTHERMAL ENERGY↗

Snake River Plain Geothermal Play Fairway Analysis - Volcanic Vents, Lacustrine Sediments, and post-Miocene Faults KMZ files

This dataset contain raw data files in kmz files (Google Earth georeference format). These files include volcanic vent locations and age, the distribution of fine-grained lacustrine sediments (which act as both a seal and an insulating layer for hydrothermal fluids), and post-Miocene faults compiled from the Idaho Geological Survey, the USGS Quaternary Fault database, and unpublished mapping. It also contains the Composite Common Risk Segment Map created during Phase 1 studies, as well as a file with locations of select deep wells used to interrogate the subsurface.

15 GEOTHERMAL ENERGY↗