Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fusion Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Effect of plasma parameters on growth and field emission properties of spherical carbon nanotube tip

The effect of plasma parameters (e.g., electron density and temperature, ion density and temperature, neutral atom density and temperature) on the growth (without a catalyst), structure, and field emission properties of a spherical carbon nanotube (CNT) tip has been theoretically investigated. A theoretical model of charge neutrality, including the kinetics of electrons, positively charged ions, and neutral atoms and the energy balance of the various species in plasma, has been developed. Numerical calculations of the radius of the spherical CNT tip for different CNT number densities and plasma parameters have been carried out for the typical glow discharge plasma parameters. It is found that upon an increase in the CNT number density and plasma parameters, the radius of the spherical CNT tip decreases, and consequently the field emission factor for the spherical CNT tip increases.

36 MATERIALS SCIENCE↗

A comparative study of single and double pulse of laser induced breakdown spectroscopy of silver

We present a comparative study of the collinear and orthogonal pre-ablation dual pulse configurations of laser induced breakdown spectroscopy (LIBS) of silver using Nd:YAG lasers. The effect of the inter-pulse delay and the ratio of the laser pulse energies on the signal intensity enhancement for both the dual pulse configurations have been investigated. Using the first laser at 532 nm and second laser at 1064 nm delayed by 5 {mu}s, we achieved nearly 2 times signal enhancement in the collinear double-pulsed configuration and nearly 12 times in the pre-ablation orthogonal configuration as compared to SP LIBS. It is ascertained that at the optimized value of the inter-pulse delay between the two lasers, the intensity ratio of the neutral silver lines follows the local thermo dynamical equilibrium (LTE) condition and it is also in excellent agreement with that of the relative transitions probabilities ratio listed in the NIST data base.

36 MATERIALS SCIENCE↗

The nature of the defects generated from plasma exposure in pristine and ultraviolet-cured low-k organosilicate glass

Defects in low-k organosilicate glass produced during air and nitrogen plasma exposure were investigated. The defects, through the measurements of electron-spin resonance and Fourier-transform infrared spectroscopy, were found to be silicon-dangling bonds. Air-plasma exposure increases the defect concentrations by breaking silicon-hydrogen bonds. Nitrogen-plasma exposure as well as free-radical exposure has only a small influence on the bond breaking. It was also shown that ultraviolet curing improves the chemical-damage resistance of the dielectric.

36 MATERIALS SCIENCE↗

Spectroscopic diagnostics of plume rebound and shockwave dynamics of confined aluminum laser plasma plumes

Generation and expansion dynamics of aluminum laser plasma plumes generated between parallel plates of varying separation ({Delta}Z = 2.0, 3.2, 4.0, and 5.6 mm), which confined plume expansion normal to the ablation surface, were diagnosed. Space and time resolved visible emission spectroscopy in the spectral range {lambda} = 355-470 nm and time gated visible imaging were employed to record emission spectra and plume dynamics. Space and time resolved profiles of N{sub e} (the electron density), T{sub e} (the electron temperature), and T{sub ionz} (the ionization temperature) were compared for different positions in the plasma plume. Significant modifications of the profiles of the above parameters were observed for plasma-surface collisions at the inner surface of the front plate, which formed a barrier to the free expansion of the plasma plume generated by the laser light on the surface of the back plate. Shockwave generation at the collision interface resulted in delayed compression of the low-density plasma plume near the inner ablation surface, at late stages in the plasma history. Upon exiting the cavity formed by the two plates, through an aperture in the front plate, the plasma plume underwent a second phase of free expansion.

36 MATERIALS SCIENCE↗

A generalized implicit algorithm for multi-dimensional particle-in-cell simulations in Cartesian geometry

An implicit multi-dimensional particle-in-cell (PIC) code is developed to study the interaction of ultrashort pulse lasers with matter. The algorithm is based on current density decomposition and is only marginally more complicated compared to explicit PIC codes, but it completely eliminates grid heating and possesses good energy conserving properties with relaxed time step and grid resolution. This is demonstrated in a test case study, in which high-energy protons are generated from a thin carbon foil at solid density using linear and circular polarizations. The grid heating rate is estimated to be 1-10 eV/ps.

36 MATERIALS SCIENCE↗

Air plasma effect on dental disinfection

A nonthermal low temperature air plasma jet is characterized and applied to study the plasma effects on oral pathogens and biofilms. Experiments were performed on samples of six defined microorganisms' cultures, including those of gram-positive bacteria and fungi, and on a cultivating biofilm sample of Streptococcus mutans UA159. The results show that the plasma jet creates a zone of microbial growth inhibition in each treated sample; the zone increases with the plasma treatment time and expands beyond the entire region directly exposed to the plasma jet. With 30s plasma treatment twice daily during 5 days of biofilm cultivation, its formation was inhibited. The viability of S. mutans cells in the treated biofilms dropped to below the measurable level and the killed bacterial cells concentrated to local regions as manifested by the fluorescence microscopy via the environmental scanning electron microscope. The emission spectroscopy of the jet indicates that its plasma effluent carries an abundance of reactive atomic oxygen, providing catalyst for the observed plasma effect.

60 APPLIED LIFE SCIENCES↗

Late-time particle emission from laser-produced graphite plasma

We report a late-time ''fireworks-like'' particle emission from laser-produced graphite plasma during its evolution. Plasmas were produced using graphite targets excited with 1064 nm Nd: yttrium aluminum garnet (YAG) laser in vacuum. The time evolution of graphite plasma was investigated using fast gated imaging and visible emission spectroscopy. The emission dynamics of plasma is rapidly changing with time and the delayed firework-like emission from the graphite target followed a black-body curve. Our studies indicated that such firework-like emission is strongly depended on target material properties and explained due to material spallation caused by overheating the trapped gases through thermal diffusion along the layer structures of graphite.

36 MATERIALS SCIENCE↗

Conversion efficiency and spectral broadening of the K-{alpha} line emitted from planar titanium targets irradiated with ultra-short laser pulses of high intensity

A study of the conversion efficiency and line shape of the K-{alpha} x-ray line radiation from a planar titanium target irradiated by an ultra-short laser pulse is performed. The conversion efficiency and spectral broadening are studied as a function of laser intensity (5 x 10{sup 16}-10{sup 18} W cm{sup -2}), laser pulse duration (45 fs-800 fs), and laser fluence (2 x 10{sup 3}-4.2 x 10{sup 4} J cm{sup -2}). The K-{alpha}{sub 1} line (4510 eV) is observed to be broadened (up to {approx}9 eV), predominantly towards the higher energy side and strongly depends on the laser fluence rather than on laser intensity. The reason for the spectral broadening is attributed to K-{alpha} emission in warm dense plasma. The role of hot electrons and direct laser heating on spectral broadening is outlined. In addition to this, our observations indicates that the presence of pre-plasma strongly contribute to the observed broadening through the inner-shell transitions in multiply charged titanium ions in the pre-plasma. The appropriate laser irradiation parameters to achieve high conversion efficiency and minimum spectral width of the K-{alpha} radiation are identified. The study is important, since the control of the spectral profile is of general interest for diffraction or scattering experiments in view of its potential in increasing temporal resolution.

36 MATERIALS SCIENCE↗

Flute instability in the tandem mirror with the divertor/dipole regions

The numerical simulation is performed in GAMMA10 A-divertor magnetic configuration, which is a candidate of remodeled device of the GAMMA10 tandem mirror [M. Inutake et al., Phys. Rev. Lett. 55, 939 (1985)]. Both divertor and dipole regions are included in the numerical calculation, which is a new point. The electron short circuit effect along x-point, therefore, is not assumed so that it is not used the boundary condition of the electrostatic perturbations being zero at the separatrix on which the magnetic field lines pass through x-point. The simulation results reveal that the dipole field plays a role of a good magnetic field line curvature to the GAMMA10 A-divertor, and so the flute modes are stabilized without help of electron short circuit effects.

36 MATERIALS SCIENCE↗

Atomic mix in directly driven inertial confinement implosions

Directly driven implosions on the Omega laser [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)] have measured the presence of atomic mix using D+T neutron yield rates from plastic capsules with and without deuterated layers, and a nearly pure tritium fuel containing 0.7% deuterium. In 15, 19, and 24 {mu}m thick plastic shells, D+T neutron yields increased by factors of 86, 112, and 24 when the 1.2 {mu}m thick inner layer was deuterated. Based on adjusting a fully atomic mix modvfel to fit yield degradation in the un-deuterated capsule and applying it to the capsule with the deuterated layer, atomic mixing accounts for 40-75% of the yield degradation due to mix. For the first time, the time dependence of mixed mass was measured by the ratio of the yield rates from both types of capsules. As expected, the amount of mix grows throughout the D+T burn.

36 MATERIALS SCIENCE↗

Decreasing high ion energy during transition in pulsed inductively coupled plasmas

Pulsed RF plasmas sustained in electronegative gas mixtures are increasingly being employed for plasma etching at future technological nodes. During the plasma transition from the afterglow to the active-glow, ion energies at the wafer can substantially increase due to the high voltage required to deposit bias power into few electrons. These high energy ions, albeit few, increase the possibility of ion bombardment damage and are, therefore, detrimental to the etching process. Strategies to decrease the high ion energies during transition are investigated using a two-dimensional computational plasma model. Results for poly-Si etch in an Ar/Cl{sub 2} gas mixture indicate that the high ion energies can be reduced by offsetting the bias pulse from the source pulse with minimal impact on the etch depth rates.

36 MATERIALS SCIENCE↗

Ultraviolet versus infrared: Effects of ablation laser wavelength on the expansion of laser-induced plasma into one-atmosphere argon gas

Laser-induced plasma from an aluminum target in one-atmosphere argon background has been investigated with ablation using nanosecond ultraviolet (UV: 355 nm) or infrared (IR: 1064 nm) laser pulses. Time- and space-resolved emission spectroscopy was used as a diagnostics tool to have access to the plasma parameters during its propagation into the background, such as optical emission intensity, electron density, and temperature. The specific feature of nanosecond laser ablation is that the pulse duration is significantly longer than the initiation time of the plasma. Laser-supported absorption wave due to post-ablation absorption of the laser radiation by the vapor plume and the shocked background gas plays a dominant role in the propagation and subsequently the behavior of the plasma. We demonstrate that the difference in absorption rate between UV and IR radiations leads to different propagation behaviors of the plasma produced with these radiations. The consequence is that higher electron density and temperature are observed for UV ablation. While for IR ablation, the plasma is found with lower electron density and temperature in a larger and more homogenous axial profile. The difference is also that for UV ablation, the background gas is principally evacuated by the expansion of the vapor plume as predicted by the standard piston model. While for IR ablation, the background gas is effectively mixed to the ejected vapor at least hundreds of nanoseconds after the initiation of the plasma. Our observations suggest a description by laser-supported combustion wave for the propagation of the plasma produced by UV laser, while that by laser-supported detonation wave for the propagation of the plasma produced by IR laser. Finally, practical consequences of specific expansion behavior for UV or IR ablation are discussed in terms of analytical performance promised by corresponding plasmas for application with laser-induced breakdown spectroscopy.

36 MATERIALS SCIENCE↗

Crossed-beam energy transfer in direct-drive implosions

Direct-drive-implosion experiments on the OMEGA laser [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)] have showed discrepancies between simulations of the scattered (non-absorbed) light levels and measured ones that indicate the presence of a mechanism that reduces laser coupling efficiency by 10%-20%. This appears to be due to crossed-beam energy transfer (CBET) that involves electromagnetic-seeded, low-gain stimulated Brillouin scattering. CBET scatters energy from the central portion of the incoming light beam to outgoing light, reducing the laser absorption and hydrodynamic efficiency of implosions. One-dimensional hydrodynamic simulations including CBET show good agreement with all observables in implosion experiments on OMEGA. Three strategies to mitigate CBET and improve laser coupling are considered: the use of narrow beams, multicolor lasers, and higher-Z ablators. Experiments on OMEGA using narrow beams have demonstrated improvements in implosion performance.

36 MATERIALS SCIENCE↗

Control of the azimuthal orientation of grains in polycrystalline Si films

Multi-directional ion beam irradiation is applied to control the crystal orientation of Si thin films during growth via plasma-enhanced chemical vapor deposition. The primary ion beam is generated by electron cyclotron resonance using an SiH{sub 4}/H{sub 2} mixture, and the auxiliary beam is obtained by redirecting a portion of the primary beam with a metal reflector. These two beams simultaneously hit the surface of the growing film from different directions. With this arrangement, we succeeded in controlling the orientation of the growth of deposited Si grains in virtually the same direction.

36 MATERIALS SCIENCE↗

Treatment surfaces with atomic oxygen excited in dielectric barrier discharge plasma of O{sub 2} admixed to N{sub 2}

This paper describes the increase in surface energy of substrates by their treatment with gas composition generated in plasmas of DBD (Dielectric Barrier Discharge) in O2 admixed with N2. Operating gas dissociation and excitation was occurred in plasmas developed in two types of reactors of capacitively-coupled dielectric barrier configurations: coaxial cylindrical, and flat rectangular. The coaxial cylindrical type comprised an inner cylindrical electrode encapsulated in a ceramic sheath installed coaxially inside a cylindrical ceramic (quartz) tube passing through an annular outer electrode. Components of the flat rectangular type were a flat ceramic tube of a narrow rectangular cross section supplied with two flat electrodes mounted against one another outside of the long parallel walls of this tube. The operating gas, mixture of N{sub 2} and O{sub 2}, was flowing in a completely insulated discharge gap formed between insulated electrodes of the devices with an average velocity of gas inlet of about 7 to 9 m/s. Dielectric barrier discharge plasma was excited in the operating gaps with a bipolar pulse voltage of about 6 kV for 2 ms at 50 kHz repetition rate applied to the electrodes of the coaxial device, and of about 14 kV for 7 ms at 30 kHz repetition rate for the flat linear device. A lifetime of excited to the 2s{sup 2}2p{sup 4}({sup 1}S{sub 0}) state in DBD plasma and streaming to the surfaces with a gas flow atomic oxygen, responsible presumably for treating surfaces, exceeded 10 ms in certain cases, that simplified its separation from DBD plasma and delivery to substrates. As it was found in particular, surfaces of glass and some of polymers revealed significant enhancement in wettability after treatment.

36 MATERIALS SCIENCE↗

Controlling the electrical properties of ZnO films by forming zinc and oxide bridges by a plasma and electron-assisted process

A new method to produce electrically steady ZnO films without any heating process has been developed by using plasma and electron beams to facilitate bonding between the metallic component and the oxygen on coated ZnO films. Both plasma atmosphere and electron beams can function as sources of nonequilibrium bonding energy, forming bridges between the zinc present in the zinc complex and the oxygen in the ZnO particles to construct a zinc-oxide thin film. Our results confirm that it is possible to achieve low conductive characteristics by controlling the acceleration voltage of electrons used to irradiate the ZnO coating. The electrically steady films fabricated have various potential applications, being particularly well-suited to electrical devices on a plastic medium.

36 MATERIALS SCIENCE↗

Theory of electron-ion energy transfer applied to laser ablation

Electron-ion temperature equilibration will be considered for states of matter typically occurring during laser ablation that is for strongly heated electrons and densities similar and lower than the one in the solid. The focus will be on fluid systems after the melt of the lattice as these dominate the hydrodynamic phase of the ablation process. It is shown that simple expressions derived for dilute gases and plasmas become highly questionable for solid-density fluids whereas the electron-phonon picture is inapplicable as well. Instead, one has to consider the collective behavior of electrons and ions in the strongly coupled fluid. The strong inter-ionic forces also strongly affect the heat capacities applied in a two-temperature model. The results presented here are based on a quantum-statistical approach applying nonequilibrium Green's functions.

36 MATERIALS SCIENCE↗