Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Function Estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

On the spatial correlations of Abell clusters

If rich clusters formed where the primordial density enhancement, when averaged over an appropriate volume, was unusually large, then they give a biased measure of the large-scale density correlation function determiend by the probability distribution of the density fluctuations on a rich cluster mass scale. If this distribution was Gaussian, the correlation function is amplified. The amplification for rich clusters is estimated to be eaual about ten and predicted trend of amplification with richness agrees qualitatively with that observed. Some implications of these results for the large-scale density correlations are discussed.

Kaiser, N.↗

The global joule heat production rate and the AE index

The degree of accuracy with which the AE index may be used as a measure of the joule heat production rate is evaluated for a typical substorm event on March 18, 1978, by estimating the global joule heat production rate as a function of time on the basis of data obtained from the IMS's six meridian chains. It is found that, although the AE index is statistically linearly related to the global joule heat production rate, caution is required when one assumes that details of AE index time variations during individual events are representative of those of the joule heat production rate.

Wei, S.↗

Centroid tracking with area array detectors

A computer program (ALGEVAL) has been developed to simulate the position estimating behavior of a centroid estimator algorithm using data typical of optical point spread function data recorded by an area array detector. Typical results are shown of varying detector properties and optical point spread function types. The detector parameters currently available for study include read noise mean value, dark current mean value and spatial variation, charge transfer efficiency and point spread function location, saturation level, signal level and pixel size. The program is capable of calculating any order centroid using an array size from 2 x 2 to 15 x 15 pixels. The output of the program is either a performance map, histogram data or tabluar data. A number of further developments are recommended.

Glavich, T. A.↗

An information measure for class discrimination

This article describes a separability measure for class discrimination. This measure is based on the Fisher information measure for estimating the mixing proportion of two classes. The Fisher information measure not only provides a means to assess quantitatively the information content in the features for separating classes, but also gives the lower bound for the variance of any unbiased estimate of the mixing proportion based on observations of the features. Unlike most commonly used separability measures, this measure is not dependent on the form of the probability distribution of the features and does not imply a specific estimation procedure. This is important because the probability distribution function that describes the data for a given class does not have simple analytic forms, such as a Gaussian. Results of applying this measure to compare the information content provided by three Landsat-derived feature vectors for the purpose of separating small grains from other crops are presented.

Shen, S. S.↗

Low-energy plasma observations in the magnetosphere of Uranus

The large, low density plasma-containing magnetosphere detected at Uranus by Voyager 2 appears to be primarily composed of protons and electrons. On a long time scale, the protons are apparently transported from the planet's nightside to the dayside by a convective electric field that is generated by the solar wind. The time for the particles to convect through the Uranian magnetosphere is estimated to be about 1 week. The proton distribution functions are characterized by a warm, subsonic core and a non-Maxwellian tail that varies significantly along the spacecraft trajectory.

Mcnutt, Ralph L., Jr.↗

Inverse solution of Kepler's equation for hyperbolic orbits

An algorithm is presented for efficient inverse solution of Kepler's equation for hyperbolic orbits. It is shown that an expansion of Barker's equation into a bicubic polynomial provides a good approximation to obtain accurate starting values for rapid numerical solution of Kepler's equation. In the approximate equation a cubic in normalized elapsed flight time from pericenter is set equal to a cubic in a function S of eccentricity and true anomaly. The initial estimate of S to use in an iteration formula is obtained by evaluating the cubic in normalized flight time and finding in most cases the single real root of the other cubic. This initial estimate has an accuracy corresponding to values of true anomaly in error by less than 0.5 degrees generally.

Boltz, Frederick W.↗

Trigonometric Polynomials For Estimation Of Spectra

Orthogonal sets of trigonometric polynomials used as suboptimal substitutes for discrete prolate-spheroidal "windows" of Thomson method of estimation of spectra. As used here, "windows" denotes weighting functions used in sampling time series to obtain their power spectra within specified frequency bands. Simplified windows designed to require less computation than do discrete prolate-spheroidal windows, albeit at price of some loss of accuracy.

Greenhall, Charles A.↗

Definition of avionics concepts for a heavy lift cargo vehicle. Volume 1: Executive summary

A cost effective, multiuser simulation, test, and demonstration facility to support the development of avionics systems for future space vehicles is examined. The technology needs and requirements of future Heavy Lift Cargo Vehicles (HLCVs) are analyzed and serve as the basis for sizing of the avionics facility, although the lab is not limited in use to support of HLCVs. Volume 1 provides a summary of the vehicle avionics trade studies, the avionics lab objectives, a summary of the lab's functional requirements and design, physical facility considerations, and cost estimates.

Source record↗

Theoretical investigations of the structures and binding energies of Be(sub n) and Mg(sub n) (n = 3-5) clusters

Researchers determined the equilibrium geometries and binding energies of Be and Mg trimers, tetramers and pentamers using single and double excitation coupled cluster (CCSD) and complete active space self-consistent-field (CASSCF) multireference configuration interaction (MRCI) wave functions in conjunction with extended atomic basis sets. Best estimates of the cluster binding energies are 24, 83 and 110 kcal/mole for Be3, Be4 and Be5; and 9, 31 and 41 kcal/mole for Mg3, Mg4 and Mg5, respectively. A comparison of the MRCI and CCSD results shows that even the best single-reference approach (limited to single and double excitations) is not capable of quantitative accuracy in determining the binding energies of Be and Mg clusters.

Lee, Timothy J.↗

A demonstration of CMOS VLSI circuit prototyping in support of the site facility using the 1.2 micron standard cell library developed by National Security Agency

Two silicon CMOS application specific integrated circuits (ASICs), a data generation chip, and a data checker chip were designed. The conversion of the data generator circuitry into a pair of CMOS ASIC chips using the 1.2 micron standard cell library is documented. The logic design of the data checker is discussed. The functions of the control circuitry is described. An accurate estimate of timing relationships is essential to make sure that the logic design performs correctly under practical conditions. Timing and delay information are examined.

Smith, Edwyn D.↗

A census of the asteroid belt

Observations obtained by the Infrared Astronomical Satellite (IRAS) during its ten month mission in 1983 were originally processed by the Asteroid Data Analysis System (ADAS) to search for 3453 asteroids with known orbital elements as of September 1985. A total of 1811 had one or more observations of sufficient reliability to be accepted. These results were released in October 1986. Recently IRAS data were reprocessed to increase both the number of recognized asteroid observations and their reliability. As input 7311 asteroids were used with known orbital elements as of December 1990. This processor is referred to as the IRAS Minor Planet Survey (IMPS). As of April 1991 approximately 3000 asteroids had been identified with one or more acceptable observations. These results were used to derive the total number of asteroids with diameters greater than 1 km. In addition to being an interesting piece of information in itself these size-frequency distributions produce bias-correction factors which, for example, will be used in investigations of the physical properties of asteroid dynamical families and to estimate the distribution of the taxonomic classes as a function of heliocentric distance.

Tedesco, E. F.↗

Statistics of gravitational lenses - The uncertainties

The assumptions in the analysis of gravitational lensing statistics are examined. Special emphasis is given to the uncertainties in the theoretical predictions. It is shown that a simple redshift cutoff model, which may result from galaxy evolution, can significantly reduce the lensing probability and explain the large mean separation of images in observed gravitational lenses. This effect may affect the constraint on the contribution of the cosmological constant to producing a flat universe from the number counts of the observed lenses. For the Omega(0) = 1 (filled beam) model, the lensing probability of early-type galaxies with finite core radii is reduced roughly by a factor of 2 for high-redshift quasars as compared with the corresponding singular isothermal sphere model. The finite core radius effect is about 20 percent for a lambda-dominated flat universe. It is also shown that the most recent galaxy luminosity function gives lensing probabilities that are smaller than previously estimated roughly by a factor of 3.

Mao, Shude↗

Gravitational radiation, inspiraling binaries, and cosmology

We show how to measure cosmological parameters using observations of inspiraling binary neutron star or black hole systems in one or more gravitational wave detectors. To illustrate, we focus on the case of fixed mass binary systems observed in a single Laser Interferometer Gravitational-wave Observatory (LIGO)-like detector. Using realistic detector noise estimates, we characterize the rate of detections as a function of a threshold SNR Rho(0), H0, and the binary 'chirp' mass. For Rho(0) = 8, H0 = 100 km/s/Mpc, and 1.4 solar mass neutron star binaries, the sample has a median redshift of 0.22. Under the same assumptions but independent of H0, a conservative rate density of coalescing binaries implies LIGO will observe about 50/yr binary inspiral events. The precision with which H0 and the deceleration parameter q0 may be determined depends on the number of observed inspirals. For fixed mass binary systems, about 100 observations with Rho(0) = 10 in the LIGO will give H0 to 10 percent in an Einstein-DeSitter cosmology, and 3000 will give q0 to 20 percent. For the conservative rate density of coalescing binaries, 100 detections with Rho(0) = 10 will require about 4 yrs.

Chernoff, David F.↗

Starburst modeling of M82 - Test case for a biased initial mass function

We compute starburst models for M82, making use of recent theoretical tracks of stellar evolution. Detailed comparisons of our models and those of others demonstrate this technique to be quite reliable, with relatively little change in output parameters as a function of the selection of theoretical tracks or of estimates of the observational characteristics of the stars along these tracks. The models are matched to the observational constraints for M82 summarized by McLeod et al. (1993). The rate of star formation and time of observation were thoroughly optimized to produce the most favorable fit to the observations, but we still found that the recently proposed forms for the solar-neighborhood IMF cannot produce starbursts adequate to fit the observations of this galaxy. We then explored adjustments to the shape of the IMF to improve the fit to M82. We find (1) the shape of the IMF for high-mass stars need not be different from that observed locally; and (2) the most likely modification to the IMF in M82 is that stars with masses below a few solar masses form much less commonly than in the solar neighborhood.

Rieke, G. H.↗

Optimal periodic control for spacecraft pointing and attitude determination

A new approach to autonomous magnetic roll/yaw control of polar-orbiting, nadir-pointing momentum bias spacecraft is considered as the baseline attitude control system for the next Tiros series. It is shown that the roll/yaw dynamics with magnetic control are periodically time varying. An optimal periodic control law is then developed. The control design features a state estimator that estimates attitude, attitude rate, and environmental torque disturbances from Earth sensor and sun sensor measurements; no gyros are needed. The state estimator doubles as a dynamic attitude determination and prediction function. In addition to improved performance, the optimal controller allows a much smaller momentum bias than would otherwise be necessary. Simulation results are given.

Pittelkau, Mark E.↗

The effect of sensor spacing on wind measurements at the Shuttle Landing Facility

This document presents results of a field study of the effect of sensor spacing on the validity of wind measurements at the Space Shuttle landing Facility (SLF). Standard measurements are made at one second intervals from 30 foot (9.1m) towers located 500 feet (152m) from the SLF centerline. The centerline winds are not exactly the same as those measured by the towers. This study quantifies the differences as a function of statistics of the observed winds and distance between the measurements and points of interest. The field program used logarithmically spaced portable wind towers to measure wind speed and direction over a range of conditions. Correlations, spectra, moments, and structure functions were computed. A universal normalization for structure functions was devised. The normalized structure functions increase as the 2/3 power of separation distance until an asymptotic value is approached. This occurs at spacings of several hundred feet (about 100m). At larger spacings, the structure functions are bounded by the asymptote. This enables quantitative estimates of the expected differences between the winds at the measurement point and the points of interest to be made from the measured wind statistics. A procedure is provided for making these estimates.

Merceret, Francis J.↗

Investigation of spreading center ecolution by joint inversion of seafloor magnetic anomaly and tectonic fabric data

Spreading center segments that have experienced a complex tectonic history including rift propagation may have a complicated signature in bathymetric and magnetic anomaly data. To gain insight into the history of such regions, we have developed techniques in which both the magnetic anomaly patterns and seafloor fabric trends are predicted theoretically, and the combined predictions are compared numerically with the data to estimate best fitting parameters for the propagation history. Fitting functions are constructed to help determine which model best matches the digitized fabric and magnetic anomaly data. Such functions offer statistical criteria for choosing the best fit model. We use this approach to resolve the propagation history of the Cobb Offset along the Juan de Fuca ridge. In this example, the magnetic anomaly data prove more useful in defining the geometry of the propagation events, while the fabric, with its greater temporal resolution, is more useful for constraining the rate of propagation. It thus appears that joint inversion of magnetic and seafloor fabric data can be valuable in tectonic analyses.

Shoberg, Tom↗

X-ray emission from a complete sample of Abell clusters of galaxies

The ROSAT All-Sky Survey (RASS) is used to investigate the X-ray properties of a complete sample of Abell clusters with measured redshifts and accurate positions. The sample comprises the 145 clusters within a 561 square degree region at high galactic latitude. The mean redshift is 0.17. This sample is especially well suited to be studied within the RASS since the mean exposure time is higher than average and the mean galactic column density is very low. These together produce a flux limit of about 4.2 x 10(exp -13) erg/sq cm/s in the 0.5 to 2.5 keV energy band. Sixty-six (46%) individual clusters are detected at a significance level higher than 99.7% of which 7 could be chance coincidences of background or foreground sources. At redshifts greater than 0.3 six clusters out of seven (86%) are detected at the same significance level. The detected objects show a clear X-ray luminosity -- galaxy count relation with a dispersion consistent with other external estimates of the error in the counts. By analyzing the excess of positive fluctuations of the X-ray flux at the cluster positions, compared with the fluctuations of randomly drawn background fields, it is possible to extend these results below the nominal flux limit. We find 80% of richness R greater than or = 0 and 86% of R greater than or = 1 clusters are X-ray emitters with fluxes above 1 x 10(exp -13) erg/sq cm/s. Nearly 90% of the clusters meeting the requirements to be in Abell's statistical sample emit above the same level. We therefore conclude that almost all Abell clusters are real clusters and the Abell catalog is not strongly contaminated by projection effects. We use the Kaplan-Meier product limit estimator to calculate the cumulative X-ray luminosity function. We show that the shape of the luminosity functions are similiar for different richness classes, but the characteristic luminosities of richness 2 clusters are about twice those of richness 1 clusters which are in turn about twice those of richness 0 clusters. This result is another manifestation of the luminosity -- richness elation for Abell clusters.

Briel, Ulrich G.↗