Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLUORINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

HPGe detector shielding optimization with MCNPX for the MEDINA PGNAA cell

Radioactive waste repositories must guarantee the non-toxicity of the waste in the long term, not only regarding radioactivity but also regarding other environmental contamination such as toxic chemicals. Analytical methods already exist for chemical characterization (ICP-MS, ICP-AES...) but they are based on test sampling. A possible alternative, for waste packages with an appropriate gamma radiation level, is to use Prompt Gamma Neutron Activation Analysis (PGNAA), a non-destructive measurement technique sensitive to several toxic chemicals. In view of the characterization of radioactive wastes in Germany and France, collaboration between the CEA Cadarache (France) and the Forschungszentrum Juelich (Germany) was initiated a few years ago. FZJ holds a PGNAA graphite cell called MEDINA (Multi Element Detection based on Instrumental Neutron Activation), allowing the characterization of 225 L drums. Fast neutrons are emitted from a D-T pulsed 14 MeV neutron generator and thermalized in graphite to induced radiative captures in the waste materials. Prompt capture gamma rays are detected using a 104% relative efficiency n-type HPGe. However, HPGe crystal is sensitive to fast neutron damage and to thermal neutron activation. A thermal neutron shield made of lithium fluorine and lithium carbonate is already used around the detector. In order to further decrease the current of fast and thermal neutrons coming into the crystal without penalizing MEDINA sensitivity (by decreasing the thermal neutron flux and neutron die away time of the cell, the gamma detection efficiency, or increasing the gamma background), some configurations based on easy-to-implement modifications of MEDINA have been simulated with MCNPX with a model of the cell already validated by experiments. Results show that fast and thermal neutron incoming current in the HPGe could easily be reduced by about a factor of 2 by additional quantities of graphite and by replacing lithium carbonate by lithium fluorine with a higher {sup 6}Li concentration. In addition, these modifications slightly increase the thermal neutron flux in the cell without deteriorating the neutron die away time, and reduce the gamma background about a factor of 2 during the neutron pulse but 5 times less after it. More important changes have also been tested, such as the addition of polyethylene and lead between the neutron generator and the HPGe detector, which is more effective regarding neutron shielding but decreases the neutron die away time, partly compensated by a larger initial thermal neutron flux. Concerning gamma background, hydrogen capture gamma ray (2.23 MeV) is increased due to the presence of polyethylene but lead around the HPGe decreases the total gamma background. In conclusion, simple modifications are possible to improve detector shielding and life time before thermal annealing of the crystal, without reducing MEDINA cell performances. Some of these modifications will be tested in the coming months. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Comparison of UF{sub 6} cylinder dose rate measurements and Monte Carlo calculations - 25593

In uranium compounds that contain fluorine, such as uranium hexafluoride (UF{sub 6}), neutron radiation fields are naturally created as a result of a reaction between fluorine and the alpha particle emitted by uranium. In order to gain a true appreciation for the true conditions of any system, it is vital to have access to true-to-life documented information, such as when performing dose rate calculations. This UF{sub 6} cylinder dose rate experiment aims at validating computational tools, i.e., MCNP, for predicting both the photon and neutron dose rates from tails (depleted uranium) 48Y cylinders. Two sets of measured neutron and photon dose rates are featured herein. The first set is taken of a semi-isolated single tails (UF{sub 6}) cylinder stored on the Uranium Byproduct Cylinder (UBC) storage pad at the URENCO USA (UUSA) site in Eunice, New Mexico. The second set is also from a tails cylinder, stored on the UBC pad, which is located on the bottom row inside an array of triple stacked 48Y tails cylinders. These cylinder storage scenarios are modeled in MCNP and the calculated photon and neutron dose rates are compared to the measured values. The comparisons between the MCNP predictions and the measured total dose rates show good agreement. Small differences can be attributed to incomplete filling of the cylinder, variations in density and uncertainties in the measurement precision as well as external conditions of the TLD. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Patterned Quasi-Liquid Surfaces for Condensation of Low Surface Tension Fluids

Extensive research concerns dropwise condensation of low surface tension fluids to promote energy efficiency and decarbonization in thermal energy systems. However, it is challenging as these fluids typically result in filmwise condensation. Drawing inspiration from the Namib desert beetle that enhances condensation through patterned wettability, conventional beetle-inspired surfaces excel in water condensation but flood when condensing low surface tension fluids. In this work, a patterned quasi-liquid surface is reported that achieves exceptional dropwise condensation of low surface tension fluids. The surface consists of alternating stripes with low surface energy, that is, a perfluoropolyether (PFPE) and fluorinated quasi-liquid surface (FQLS), that shows ultralow contact angle hysteresis for ethanol and hexane. Further, the PFPE stripes are slightly more slippery, acting as slippery bridges that accelerate droplet coalescence and removal. It is experimentally demonstrated that the striped PFPE-FQLS pattern exhibits a heat transfer coefficient 85%, 330%, and 550% higher than that of PFPE, fluorinated silane, and filmwise condensation, respectively. This study reveals that a high contact angle is desired to sustain dropwise condensation, irrespective of contact angle hysteresis. These findings provide a new paradigm for promoting the dropwise condensation of low surface tension fluids and offer valuable insights into surface design for energy sustainability.

36 MATERIALS SCIENCE↗

Polymers with Side Chain Porosity for Ultrapermeable and Plasticization Resistant Materials for Gas Separations

Polymer membranes with ultrahigh CO 2 permeabilities and high selectivities are needed to address some of the critical separation challenges related to energy and the environment, especially in natural gas purification and postcombustion carbon capture. However, very few solution-processable, linear polymers are known today that access these types of characteristics, and all of the known structures achieve their separation performance through the design of rigid backbone chemistries that concomitantly increase chain stiffness and interchain spacing, thereby resulting in ultramicroporosity in solid-state chain-entangled films. Herein, the separation performance of a porous polymer obtained via ring-opening metathesis polymerization is reported, which possesses a flexible backbone with rigid, fluorinated side chains. This polymer exhibits ultrahigh CO 2 permeability (>21 000 Barrer) and exceptional plasticization resistance (CO 2 plasticization pressure > 51 bar). Compared to traditional polymers of intrinsic microporosity, the rate of physical aging is slower, especially for gases with small effective diameters (i.e., He, H 2 , and O 2 ). Overall, this structural design strategy, coupled with studies on fluorination, demonstrates a generalizable approach to create new polymers with flexible backbones and pore-forming side chains that have unexplored promise for small-molecule separations.

36 MATERIALS SCIENCE↗

Deciphering the Dynamic Balance Between Solvation Strength and Polysulfides Reaction Heterogeneity in Practical Lithium‐Sulfur Batteries

Achieving stable interfacial chemistry in lithium–sulfur batteries under practical conditions remains a key barrier to commercialization. Here, we demonstrate that interfacial dynamics can be effectively regulated by coupling solvation-power control with intrinsic heterogeneity of sulfur redox chemistry through the introduction of a weakly solvating fluorinated cosolvent, LIB 1200ET (1200ET). Compared with conventional fluorinated ethers, 1200ET efficiently shifts Li + solvation environment toward a more non-coordinated configuration at low volume fractions, enabling substantial solvation modulation without significantly impairing sulfur redox kinetics. This solvation transition weakens Li + –solvent interactions while strengthening Li + –anion and Li + –lithium polysulfide (LPS) coordination, suppressing LPS solubility and promoting reconstruction of solid–electrolyte interphase (SEI). Regulated LPS chemistry, together with 1200ET, leads to formation of a S 4+ -rich, LiF-reinforced SEI with enhanced ionic conductivity and mechanical robustness. Spatially resolved sulfur K-edge X-ray absorption spectroscopy on pouch cells reveals pronounced current-density-dependent chemical heterogeneity, distinguishing kinetically dominated and solvation-controlled regions. Under practical conditions (3.7 mg cm −2 sulfur loading, E/S = 6 µL mg −1 ), a single-layer pouch cell delivers 527 mAh g −1 over 200 cycles at C/3, while an Ah-level multilayer pouch cell achieves an energy density of 358 Wh kg −1 . These results establish non-coordinating cosolvent-driven solvation engineering as a scalable strategy for practical Li–S batteries.

36 MATERIALS SCIENCE↗

Addressing Inherent Challenges to Chemical Relithiation of Cycled End‐of‐Life Cathode Materials

Recycling end‐of‐life (EOL) lithium‐ion batteries (LIBs) is important to retain valuable resources from critical materials present in EOL battery waste. Direct recycling methods offer an opportunity to recover intact valuable cathode materials with minimal re‐processing. An important step of the direct recycling process is relithiation which is used to restore lithium content to EOL cathode materials. However, little has been done to study how preprocessing steps such as washing or binder removal may affect relithiation methods in the direct recycling process. Here, the evolution of fluorine byproducts left over from preprocessing steps during a low‐temperature chemical redox mediator relithiation process is tracked. A facile washing step is presented as a solution for mediating adverse effects of surface contamination on the chemical relithiation performance. The structure, lithium content, and electrochemical performance of relithiated EOL NMC 622 material that underwent a pre‐relithiation washing step to remove fluorine byproducts is shown to match that of pristine NMC 622. In this work, it is showed that redox mediator relithiation as a part of a direct recycling process is a promising low energy method that can be applied to EOL material with inherent surface impurities if the proper pre‐relithiation processing steps are implemented.

25 ENERGY STORAGE↗

Fluoro‐nitrogen Cations

Abstract The crystal structures of [NH 3 F] + [CF 3 SO 3 ] − , [NH 2 F 2 ] + [SbF 6 ] − , and [N 2 F 3 ] + [Sb 3 F 16 ] − have been determined, representing the first structural characterizations of these simple fluoro‐nitrogen cations. The influences of the hybridization of the central nitrogen atom and of the number of fluorine substituents on the N−F bond lengths are evaluated for the series N 2 F + , N 2 F 3 + , NF 2 O + , NH 3 F + , NH 2 F 2 + , and NF 4 + . It is shown that the N−F bond length decreases from 1.40 Å to 1.26 Å with increasing fluorine substitution and increasing s‐character of the nitrogen atom, and that unusual N−F bond lengths reported in the previous literature are caused by disorder problems

Vij, Ashwani↗

Topotactic Synthesis of Phosphabenzene-Functionalized Porous Organic Polymers: Efficient Ligands in CO 2 Conversion

Progress toward the preparation of porous organic polymers (POPs) with task-specific functionalities has been exceedingly slow—especially where polymers containing low-oxidation phosphorus in the structure are concerned. In this work, a two-step topotactic pathway for the preparation of phosphabenzene-based POPs (Phos-POPs) under metal-free conditions is reported, without the use of unstable phosphorus-based monomers. The synthetic route allows additional functionalities to be introduced into the porous polymer framework with ease. As an example, partially fluorinated Phos-POPs (F-Phos-POPs) were obtained with a surface area of up to 591 m 2 g –1 . After coordination with Ru species, a Ru/F-Phos-POPs catalyst exhibited high catalytic efficiency in the formylation of amines (turnover frequency up to 204 h –1 ) using a CO 2 /H 2 mixture, in comparison with the non-fluorinated analogue (43 h –1 ) and a Au/TiO 2 heterogeneous catalysts reported previously (<44 h –1 ). This work describes a practical method for synthesis of porous organic phosphorus-based polymers with applications in transition-metal-based heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fluoro–nitrogen Cations

The crystal structures of [NH 3 F] + [CF 3 SO 3 ] – , [NH 2 F 2 ] + [SbF 6 ] – , and [N 2 F 3 ] + [Sb 3 F 16 ] – have been determined, representing the first structural characterizations of these simple fluoro-nitrogen cations. The influences of the hybridization of the central nitrogen atom and of the number of fluorine substituents on the N–F bond lengths are evaluated for the series N 2 F + , N 2 F 3 + , NF 2 O + , NH 3 F + , NH 2 F 2 + , and NF 4 + . Here it is shown that the N–F bond length decreases from 1.40 Å to 1.26 Å with increasing fluorine substitution and increasing s-character of the nitrogen atom, and that unusual N–F bond lengths reported in the previous literature are caused by disorder problems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Syntheses of Tungsten Imido Cyclohexylidene Complexes Using Perfluoro‐ t ‐Butanol or Hexafluoro‐ t ‐Butanol as Acids

Abstract The fluorinated alcohols, (CF 3 ) 3 COH (R F9 OH) and (CF 3 ) 2 MeCOH (R F6 OH), react with W(NR) 2 Cy 2 (Cy=Cyclohexyl; R=2,6‐diisopropylphenyl or 1‐adamantyl) in C 6 D 6 at 55 °C to give cyclohexylidene complexes. Traditional routes to terminal alkylidene complexes (neopentylidene or neophylidene) have used either triflic acid or HCl (rarely), but relatively weak fluorinated acids are sufficient and active bisalkoxide catalysts are therefore prepared directly. An α hydrogen abstraction reaction to give a cyclohexylidene complex from a biscyclohexyl complex appears to be as facile as α hydrogen abstraction to give a neopentylidene or neophylidene ligand, but isomerization of a cyclohexene formed through β hydrogen abstraction is also a possibility. The OR F9 ligands can be replaced readily with dimethylpyrrolide (Me 2 Pyr) or other more basic alkoxides. Single crystal X‐ray studies were carried out on W(NAr) 2 Cy 2 , W(NAr)(OR F9 ) 2 (C 6 H 10 )(ArNH 2 ), W(NAr)(OR F6 ) 2 (C 6 H 10 )(ArNH 2 ), W(NAd)(OR F9 ) 2 (C 6 H 10 )(AdNH 2 ), W(NAr)(O‐ i ‐Pr F6 ) 3 Cy, and W(NAd)(η 1 ‐Me 2 Pyr) 2 (C 6 H 10 ) (C 6 H 10 =cyclohexylidene).

Maji, Milan↗

1 H- 19 F REDOR-filtered NMR spin diffusion measurements of domain size in heterogeneous polymers

Solid state NMR spectroscopy is inherently sensitive to chemical structure and composition, and thus makes an ideal method to probe the heterogeneity of multicomponent polymers. Specifically, NMR spin diffusion experiments can be used to extract reliable information about spatial domain sizes on multiple length scales, provided that magnetization selection of one domain can be achieved. In this paper, we demonstrate the preferential filtering of protons in fluorinated domains during NMR spin diffusion exper-iments using 1 H- 19 F heteronuclear dipolar dephasing based on rotational echo double resonance (REDOR) MAS NMR techniques. Three pulse sequence variations are demonstrated based on the different nuclei detected: direct 1 H detection, plus both 1 H→ 13 C cross polarization (CP) and 1 H→ 19 F CP detection schemes. This 1 H- 19 F REDOR-filtered spin diffusion method was used to measure fluorinated domain sizes for a complex polymer blend. The efficacy of the REDOR-based spin filter does not rely on spin relaxation behavior or chemical shift differences, and thus is applicable for performing NMR spin diffu-sion experiments in samples where traditional magnetization filters may prove unsuccessful. This REDOR-filtered NMR spin diffusion method can also be extended to other samples where a heteronuclear spin pair exists that is unique to the domain of interest.

36 MATERIALS SCIENCE↗

Effect of HfO{sub 2} on the dielectric, optoelectronic and energy harvesting properties of PVDF

In this article, energy recovery based on PVDF doped with HfO{sub 2} is proposed. The free energy of CH{sub 2}=CF{sub 2} is determined in different base with the B3LPY functional. The basis set LanL2DZ was chosen because it takes into account the atom of hafnium of atomic number Z=72 which exceeds the extension of some basis sets. In addition, LanL2DZ gives an accurate result and a reasonable computing time. The geometries of the molecules were optimized with B3LPY/LanL2DZ. The motivation of this study is the improvement of the optoelectronic, dielectric and piezoelectric properties of PVDF by introducing HfO{sub 2} into its matrix. We determined the parameters of (−CH{sub 2}−CF{sub 2}−){sub 3}⋅xHfO{sub 2} and identified the effect of HfO{sub 2} on the PVDF. It appears that the permittivity of the modified PVDF increases. When the PVDF is doped once or twice, a fluorine atom is captured by the hafnium. The migration of fluorine towards HfO{sub 2} considerably favors the electric polarization of the molecule. It then results in an important dipole moment with a polar phase undoubtedly favored. Our results show that the molecule (−CH{sub 2}−CF{sub 2}−){sub 3}⋅HfO{sub 2} is a good dielectric material (E{sub g}=5.90 eV) and can be a good piezoelectric material. The electronic affinity of the modified PVDF is significantly higher than that of virgin PVDF. This demonstrates that HfO{sub 2}-doped PVDF is more stable than virgin PVDF. The piezoelectric properties are significantly improved. The piezoelectric coefficient varies between 13.111 and 25.635 pC N{sup −1} for the modified PVDF compared to 11.979 pC N {sup −1} for the virgin PVDF. In conclusion, HfO{sub 2} improves the dielectric, optoelectronic and piezoelectric properties of PVDF.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Production of Gas-Phase Uranium Fluoroanions Via Solubilization of Uranium Oxides in the [1-Ethyl-3-Methylimidazolium]{sup +}[F(HF){sub 2.3}]{sup −} Ionic Liquid

A new methodology for gas-phase uranium ion formation is described in which UO{sub 2} is dissolved in neat N-ethyl,N′-methylimidazolium fluorohydrogenate ionic liquid [EMIm{sup +}][F(HF){sub 2.3}{sup −}], yielding a blue-green solution. The solution was diluted with acetonitrile and then analyzed by electrospray ionization mass spectrometry. UF{sub 6}{sup −} (a U(V) species) was observed at m/z = 352, and other than cluster ions derived from the ionic liquid, nothing else was observed. When the sample was analyzed using infusion desorption chemical ionization, UF{sub 6}{sup −} was the base peak, and it was accompanied by a less intense UF{sub 5}{sup −} that most likely was formed by elimination of a fluorine radical from UF{sub 6}{sup −}. Formation of UF{sub 6}{sup −} required dissolution of UO{sub 2} followed by or concurrent with oxidation of uranium from the + 4 to the + 5 state and finally formation of the fluorouranate. Dissolution of UO{sub 3} produced a bright yellow solution indicative of a U(VI) species; however, electrospray ionization did not produce abundant U-containing ions. The abundant UF{sub 6}{sup −} provides a vehicle for accurate measurement of uranium isotopic abundances free from interference from minor isotopes of other elements and a convenient ion synthesis route that is needed gas-phase structure and reactivity studies like infrared multiphoton dissociation and ion-molecule dissociation and condensation reactions. The reactive fluorohydrogenate ionic liquid may also enable conversion of uranium in oxidic matrices into uranium fluorides that slowly oxidize to uranyl fluoride under ambient conditions, liberating the metal for facile measurement of isotope ratios without extensive chemical separations. .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CALPHAD modeling of uranium nitride (UN) fabrication routes enabled by first-principles calculations

The thermochemical details of fabricating uranium nitride (UN) by ammonolysis of uranium tetraflouride (UF 4 ) were determined using density functional theory (DFT) and CALculation of PHAse Diagrams (CALPHAD) computational methods. The thermochemical data of all binary, ternary, and quaternary U-H-N-F phases were computed using DFT, and the data for the phases that have not been measured experimentally, including UN 2 and NH 4 F(g), were combined with existing experimentally-determined data for CALPHAD modeling. The DFT data were benchmarked using experimental Gibbs energy of reaction and experimental thermochemical data for individual species. Phase diagrams relevant to the ammonolysis reaction are depicted, showing regions of stability for solid U-N, U-F and U-N-F phases. An unidentified phase produced in a previous experiment was identified as UN 0.95 F 1.2 (UNF) by comparing its X-ray diffraction spectrum to the experimental spectrum, and its formation during the fabrication of UN from UF 4 is supported by the simulated phase diagram. Here, it is calculated that UN 2 can be produced by the ammonolysis of UF 4 , but requires elevated temperatures, high NH 3 (g) partial pressure, and large amounts of flowing NH 3 (g) to avoid solid flu oride impurities in the uranium nitride. Likewise, U 2 N 3 can be produced instead at temperatures greater than 980 K. The use of silane (SiH 4 ) gas was investigated as a potential additive in the ammonolysis fabrication route to speed removal of fluorine. The addition of SiH 4 (g) offers little advantage to the removal of fluorine, and adds the complication of Si 3 N 4 formation. The use of DFT to fill in missing data to perform CALPHAD calculations demonstrated here allows for the determination of more comprehensive and trustworthy phase diagrams than the use of existing experimental data alone.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Porosity and hydrophilicity modulated quaternary ammonium-based sorbents for CO 2 capture

Quaternary ammonium (QA)-based polymeric sorbents are known to be effective for CO 2 capture, especially from ultradilute streams like air. In this work, we address two major challenges in QA sorbent design for application in moisture-swing processes, porosity control and hydrophilicity modulation. Facilely substituting porous CO 2 -active components for non-porous ones can enhance the sorption kinetics by 4-fold compared to the state-of-art, and micro–mesoporous structures are identified as optimal porous structures. A method to modulate the hydrophilicity of QA-based sorbents is developed using controlled radical polymerization, incorporating fluorine-containing monomers. The CO 2 sorption capacity and the tolerance towards moisture are simultaneously enhanced via adjustment of the structure and the content of fluorine-containing blocks. Finally, we postulate that porosity and hydrophilicity optimization can make QA-based sorbents adaptive to deployment of scalable moisture-swing processes in varied and complex atmospheric circumstances.

42 ENGINEERING↗

Synthesis of oxy-hydroxyfluorinated anatase nanoparticles grown on carbon nanotubes [Synthesis of oxy-hydroxyfluorinated anatase grown on carbon nanotubes]

The synthesis of composite materials containing carbon nanotubes (CNTs) and inorganic nanocrystals is of interest to combine the specific properties of each components. While literature provides broad studies on the growth of anatase TiO 2 onto CNTs, it has never been reported how the presence of aqueous HF could affect the chemical composition of CNTs. Here, we demonstrated that CNTs are inactive toward fluorination during the solvothermal synthesis of an oxy-hydroxyfluorinated compound featuring the anatase-type structure. We further showed that functionalized CNTs offer nucleation sites that favor nanocrystals growth. As a result, the prepared composite features CNTs that are decorated by anatase nanocrystals. The results also showed that, in this condition, titanium alkoxide readily react with HF via a fluorolysis reaction allowing stabilizing high content of fluorine within the anatase network.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗