Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Event Detection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Radar Observations from the Haystack Ultrawideband Satellite Imaging Radar in 2019

The NASA Orbital Debris Program Office (ODPO) relies primarily on ground-based radar measurements to characterize the distribution of small debris, down to approximately 3 mm depending upon altitude and the sensor used, in low Earth orbit (LEO). Since the early 1990’s, the Massachusetts Institute of Technology (MIT) Lincoln Laboratory (LL) has been collecting radar measurements for the NASA ODPO under agreements with the U.S. Department of Defense. The Haystack Ultrawideband Satellite Imaging Radar (HUSIR) is the primary ground-based radar sensor used by the ODPO and provides data on orbital debris down to an approximate size of 5.5 mm below 1000km altitude using the NASA size estimation model (SEM). Since orbital debris of this size are a significant risk to both human and robotic missions in LEO, the sensitivity of this radar makes it a high-value sensor. The NASA ODPO radar measurements are conducted on a continual basis for monitoring and enabling modeling of the orbital debris environment over time. HUSIR observations from 2019 are the most recent snapshot of the environment that has been measured and analyzed to date. In recent years, HUSIR measurements indicated relatively stable populations for the orbital debris objects that it is able to detect. In 2019, several interesting events happened on-orbit, including the start of large constellation deployments into LEO, as well as the Indian anti-satellite test with Microsat-R (International Designator 2019-006A, U.S. Strategic Command Space Surveillance Network catalog number 43947). Due to these events, coupled with a general increase in the number of missions and participants launching missions in recent years, continual monitoring is necessary to determine the effects of this increased activity on the orbital debris environment. This paper will explore the results of the 2019 HUSIR radar measurements, including above-average flux measurements at lower LEO altitudes and the evolution of the flux during the time of observations.

James Murray↗
NASA NTRS2020

The TESS-Keck Survey. I. A Warm Sub-Saturn-mass Planet and a Caution about Stray Light in TESS Cameras

We report the detection of a Saturn-size exoplanet orbiting HD 332231 (TOI 1456) in light curves from the Transiting Exoplanet Survey Satellite (TESS). HD 332231—an F8 dwarf star with a V-band magnitude of 8.56—was observed by TESS in Sectors 14 and 15. We detect a single-transit event in the Sector 15 presearch data conditioning (PDC) light curve. We obtain spectroscopic follow-up observations of HD 332231 with the Automated Planet Finder, Keck I, and SONG telescopes. The orbital period we infer from radial velocity (RV) observations leads to the discovery of another transit in Sector 14 that was masked by PDC due to scattered light contamination. A joint analysis of the transit and RV data confirms the planetary nature of HD 332231 b, a Saturn-size (0.867 (+0.027,-0.025 R(J)), sub-Saturn-mass (0.244 ± 0.021M(J)) exoplanet on a 18.71 day circular orbit. The low surface gravity of HD 332231 b and the relatively low stellar flux it receives make it a compelling target for transmission spectroscopy. Also, the stellar obliquity is likely measurable via the Rossiter–McLaughlin effect, an exciting prospect given the 0.14 au orbital separation of HD 332231 b. The spectroscopic observations do not provide substantial evidence for any additional planets in the HD 332231 system, but continued RV monitoring is needed to further characterize this system. We also predict that the frequency and duration of masked data in the PDC light curves for TESS Sectors 14–16 could hide transits of some exoplanets with orbital periods between 10.5 and 17.5 days.

Paul A. Dalba↗
NASA NTRSDate not supplied

Structural Health Monitoring of Vertical Lift Structures Operating in an Urban Environment

Verifying the structural integrity of aeronautical vehicles is of critical importance for the safety of passengers and crew. When operating in a densely populated urban area, pedestrian safety and collateral damage to buildings and other infrastructure also become important concerns. Damage modes, including fatigue from an increased frequency of take-off and landing cycles and a higher probability of impacts from bird strikes, also pose different failure risks as compared to commercial long-haul aircraft and thus require a change in structural health monitoring philosophy. This presentation will review the state of the art in structural health monitoring with an eye toward applications for vertical lift systems operated in the urban environment. Structural health monitoring methods including eddy current, fiber optic, ultrasonic plate wave, surface acoustic wave and electrical impedance tomography will be explored for use in on-board monitoring of impact and overstrain events as well as damage detection and characterization. Infusion of the data into an early warning system to help ensure damage will not propagate to failure during flight will also be discussed.

Russell A Wincheski↗
NASA NTRS2022

Investigating Stable Oxygen and Carbon Isotopic Variability in Speleothem Records Over the Last Millennium Using Multiple Isotope-Enabled Climate Models

The incorporation of water isotopologues into the hydrology of general circulation models (GCMs) facilitates the comparison between modeled and measured proxy data in paleoclimate archives. However, the variability and drivers of measured and modeled water isotopologues, as well as the diversity of their representation in different models, are not well constrained. Improving our understanding of this variability in past and present climates will help to better constrain future climate change projections and decrease their range of uncertainty. Speleothems are a precisely datable terrestrial paleoclimate archives and provide well-preserved (semi-)continuous multivariate isotope time series in the lower latitudes and mid-latitudes and are therefore well suited to assess climate and isotope variability on decadal and longer timescales. However, the relationships of speleothem oxygen and carbon isotopes to climate variables are influenced by site-specific parameters, and their comparison to GCMs is not always straightforward. Here we compare speleothem oxygen and carbon isotopic signatures from the Speleothem Isotopes Synthesis and Analysis database version 2 (SISALv2) to the output of five different water-isotope-enabled GCMs (ECHAM5-wiso, GISS-E2-R, iCESM, iHadCM3, and isoGSM) over the last millennium (850–1850 CE). We systematically evaluate differences and commonalities between the standardized model simulation outputs. The goal is to distinguish climatic drivers of variability for modeled isotopes and compare them to those of measured isotopes. We find strong regional differences in the oxygen isotope signatures between models that can partly be attributed to differences in modeled surface temperature. At low latitudes, precipitation amount is the dominant driver for stable water isotope variability; however, at cave locations the agreement between modeled temperature variability is higher than for precipitation variability. While modeled isotopic signatures at cave locations exhibited extreme events coinciding with changes in volcanic and solar forcing, such fingerprints are not apparent in the speleothem isotopes. This may be attributed to the lower temporal resolution of speleothem records compared to the events that are to be detected. Using spectral analysis, we can show that all models underestimate decadal and longer variability compared to speleothems (albeit to varying extents). We found that no model excels in all analyzed comparisons, although some perform better than the others in either mean or variability. Therefore, we advise a multi-model approach whenever comparing proxy data to modeled data. Considering karst and cave internal processes, e.g., through isotope-enabled karst models, may alter the variability in speleothem isotopes and play an important role in determining the most appropriate model. By exploring new ways of analyzing the relationship between the oxygen and carbon isotopes, their variability, and co-variability across timescales, we provide methods that may serve as a baseline for future studies with different models using, e.g., different isotopes, different climate archives, or different time periods.

isotope-enabled simulations↗
NASA NTRSDate not supplied

Cloud Macrophysical Changes Observed by MODIS, CALIPSO, and CloudSat for the 11-year Period

Using the Moderate Resolution Imaging Spectroradiometer (MODIS), Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO), and CloudSatsatellitemeasurements, cloud macrophysicalchanges are examined from 2007 to 2017(Ham et al., 2021). Particularly, we compare cloud changes derived from MODIS passive sensor and CALIPSO-CloudSat (CALCS) combined active sensor measurements. Both MODIS and CALCS well capture general features of the cloud changes related to El Niño–Southern Oscillation (ENSO) events. However, because of better detections of thin cirrus clouds, CALCS cloud volume anomalies are better correlated with relative humidity anomalies, compared to MODIS. In addition, MODIS observations show a stronger anticorrelation between low and mid/high cloud volume anomalies, compared to CALCS, mainly due to limitations in detecting overlapping clouds by MODIS passive sensor.In addition, the geometrical thickness of MODIS mid/high clouds is thinner than that from CALCS, less affecting cloud amounts at 0-3 km altitude.

Cloud↗
DOE OSTI2026

Reconstruction of Six-Dimensional Phase Space

A phase space is a mathematical representation of all possible physical states of a system. Particle beams at Fermilab exist within a six-dimensional (6D) phase space defined by three positional components, (x, y, z) and three momentum components, (px, py, pz). To reconstruct this space implies taking measurement data from detectors and mapping out particle behavior using computational methods. The beam detectors, however, are only able to detect spatial distribution among the events of the beam, therefore being limited to positional data. Also, due to the vast number of events in a particle beam, it is extremely difficult to analyze and differentiate every single one’s behavior. However, with Machine Learning (ML), which can distinguish between patterns and map out particle behavior more efficiently. We first used the particle beam software, G4beamline, to simulate a 10,000-event muon beam, adjusting parameters such as initial momentum magnitude (p¬0) and virtual detector position. Using ten virtual detectors, we analyzed p0 values such that minimum 9,990 events were analyzed by every detector. We then input the data from these beam simulations to a C++ program, that randomly selects 100 events, and creates a 2D histogram based on spatial distribution, detector position, and event intensity. This process is repeated 100 times to create 100 histograms per p0 value. These images were then input to a modified ResNet18 Convolutional Neural Network (CNN) for training, and to predict p0 from some unseen set of histograms. The model was accurate when trained on momentum increments of 5 MeV/c and provided with denser training samples around highly variable test values. These results displayed machine learning being able to accurately predict p0 from being trained on different particle behaviors.

Shirlee, Jermain [Fermilab]↗
NASA NTRS2007

Interplanetary Dust Clouds Near 1AU Detected by STEREO

For a 21 day interval beginning on Jan 28, 2007, the radio and plasma wave instruments (S/WAVES) on the twin STEREO spacecraft detected intense impulse-like emissions in both the time-domain receivers and the low end of the frequency-domain receivers. These emissions were much more intense on the STEREO Ahead instrument, but were detected by both. During that interval, the two STEREO spacecraft were only separated by about 0.1deg in heliocentric longitude. All attempts to understand the emissions in terms of electrical disturbances onboard the spacecraft were unsuccessful and, since the impulsive events essentially ceased on Feb 18,2007, the entire study was put on lower priority. However, beginning abruptly on July 20, 2007, a very similar and more intense episode of impulses was detected exclusively by S/WAVES on the STEREO Ahead spacecraft, now separated from Behind by more than 20deg of heliocentric longitude. This new episode lasted nearly as long as the Jan-Feb episode, some 20 days, ending on Aug. 9. On Aug. 13,2007, the STEREO Behind spacecraft arrived at the same heliocentric longitude as the Ahead spacecraft was at on July 20 and the S/WAVES instrument abruptly started detecting impulsive events, although at lower intensities than those on Ahead. The individual waveform of the detected impulses is very similar to signals recorded by the Voyager plasma wave (PWS) and radio astronomy (PRA) instruments and more recently by the Cassini radio and plasma wave science (RPWS) instrument when those spacecraft plunged through Saturn's rings. Those Saturnian signals are attributed to micron-sized dust particle impacts on the spacecraft which creates a temporary plasma cloud which, in turn, induces an electrical signal on the antennas. We reanalyzed the STEREO episodes along the lines of the Saturnian ring plane analyses and have concluded that the STEREO impulses are very likely due to similar dust impacts with bands or clouds of dust of cometary or, more generally, zodiacal light material near 1 AU. The distribution of these clouds of small dust particles is significantly different than theoretical models of interplanetary dust distribution

Kaiser↗
DOE OSTI2020

Gamma-Rays from Kilonovae and the Cosmic Gamma-Ray Background

The recent detection of the gravitational-wave event GW170817, produced by the coalescence of two neutron stars, and of its optical–infrared counterpart, powered by the radioactive decay of r-process elements, has opened a new window onto gamma-ray astronomy: the direct detection of photons coming from such decays. In this work, we calculate the contribution of kilonovae to the diffuse gamma-ray background in the MeV range, using recent results on the spectra of the gamma-rays emitted in individual events, and we compare it with that from other sources. We find that the contribution from kilonovae is not dominant in such an energy range, but within current uncertainties, and its addition to other sources might help to fit the observational data.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Measurement of the Z boson invisible width at $\sqrt{s}=13$ TeV with the ATLAS detector

A measurement of the invisible width of the Z boson using events with jets and missing transverse momentum is presented using 37 fb -1 of 13 TeV proton–proton data collected by the ATLAS detector in 2015 and 2016. The ratio of Z → inv to Z → ℓℓ events, where inv refers to non-detected particles and ℓ is either an electron or a muon, is measured and corrected for detector effects. Events with at least one energetic central jet with p T ≥ 110 GeV are selected for both the Z → inv and Z → ℓℓ final states to obtain a similar phase space in the ratio. The invisible width is measured to be 506 ± 2 (stat.) ± 12 (syst.) MeV and is the single most precise recoil-based measurement. The result is in agreement with the most precise determination from LEP and the Standard Model prediction based on three neutrino generations.

13000 GeV-cms↗
NASA NTRS1982

Observation of two gamma-ray bursts by Vela X-ray detectors

Bursts of X-rays coincident in time with two gamma-ray burst events were observed by the 3-12 keV collimated X-ray detectors on the Vela spacecraft. Both of these observations show recurrence on a time scale of hundreds of seconds. For one of these events (GB 720514) the X-ray detection gives an improved position as well as information on the spectrum late in the outburst. The other event (GB 740723) is of special interest because the source, not previously located, is consistent in direction with the binary pulsar SMC X-1 in the Small Magellanic Cloud; this is the first moderately small error box for a gamma-ray burst to contain a strong X-ray source.

Terrell, J.↗
DOE OSTI2023

Project report for year 1

In the first year of the project, we developed a fire event tracking system using active fire detections recorded by the Visible Infrared Imaging Radiometer Suite (VIIRS). We employed this algorithm to track all large fires that occurred in California from 2013 to 2020, and created a retrospective Fire Event Data Suite (FEDS) that contains the vector shapes of fire perimeters, active fire fronts, and the locations and fire radiative powers for each fire pixel at 12-hour temporal resolution for each fire event. Using the 2020 Creek Fire as a test bed, we also delineated hourly fire perimeters by combining the FEDS data with the hourly rates of spread derived from Geostationary Operational Environmental Satellite (GOES) Advanced Baseline Imager (ABI) fire data. This dataset will form the basis of the near-real-time hourly fire emissions product that we plan to develop at years 2 and 3 of the project.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Timing and Multi-Channel: Novel Method for Determining the Neutrino Mass Ordering from Supernovae

One of the few remaining unknowns in the standard three-flavor neutrino oscillation paradigm is the ordering of neutrino masses. In this work we propose a novel method for determining neutrino mass ordering using the time information on early supernova neutrino events. In a core-collapse supernova, neutrinos are produced earlier than antineutrinos and, depending on the mass ordering which affects the adiabatic flavor evolution, may cause earlier observable signals in $\nu_e$ detection channels than in others. Hence, the time differences are sensitive to the mass ordering. We find that using the time information on the detection of the first galactic supernova events at future detectors like DUNE, JUNO and Hyper-Kamiokande, the mass ordering can already be determined at 2$\sigma$ CL, while $\mathcal{O}(10)$ events suffice for the discovery. Our method does not require high-statistics and could be used within the supernova early warning system (SNEWS) which will have access to the time information on early supernova neutrino events recorded in a number of detectors. The method proposed in this paper also implies a crucial interplay between the mass ordering and the triangulation method for locating supernovae.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Full‐Waveform Simulation of Infrasound Propagation in the Atmosphere: A Case Study of the 2023 April 20 SpaceX Starship Explosion

Infrasound, low‐frequency sound below 20 Hz, has been a key technology to monitor explosion events in the atmosphere. The International Monitoring System (IMS) of the Comprehensive Nuclear‐Test‐Ban Treaty Organization provides the means for continuous monitoring of infrasonic events worldwide. Infrasonic techniques for event location and size estimation can also complement other observational techniques for the detection and characterization of the entry of asteroids or large meteoroids. In this study, we describe the detection capability of IMS infrasound stations for an explosive event in the middle of the atmosphere. Full‐waveform simulations are performed with the specification of atmospheric conditions and incorporated into the event location and explosion yield estimation. We applied it to the 2023 April 20 SpaceX Starship explosion at 29 km altitude. Starship is a super heavy‐lift space vehicle constructed by SpaceX and known as the largest and most powerful rocket ever built. The Starship explosion created huge pressure disturbances in the atmosphere, and its infrasound was detected by the IMS arrays in North America between 2000 and 4000 km. Independent observational data and available ground‐truth information provide a rare opportunity to evaluate the monitoring capability of the IMS network for elevated sources in the atmosphere. We also demonstrate the capability of full‐waveform simulation for infrasound wavefield characterization and prediction to improve event location and yield estimation.

Geosciences↗
DOE OSTI2024

Search for Continuous and Transient Neutrino Emission Associated with IceCube’s Highest-energy Tracks: An 11 yr Analysis

IceCube alert events are neutrinos with a moderate-to-high probability of having astrophysical origin. In this study, we analyze 11 yr of IceCube data and investigate 122 alert events and a selection of high-energy tracks detected between 2009 and the end of 2021. This high-energy event selection (alert events + high-energy tracks) has an average probability of ≥0.5 of being of astrophysical origin. We search for additional continuous and transient neutrino emission within the high-energy events' error regions. We find no evidence for significant continuous neutrino emission from any of the alert event directions. The only locally significant neutrino emission is the transient emission associated with the blazar TXS 0506+056, with a local significance of 3σ, which confirms previous IceCube studies. When correcting for 122 test positions, the global p-value is 0.156 and compatible with the background hypothesis. We constrain the total continuous flux emitted from all 122 test positions at 100 TeV to be below 1.2 × 10 –15 (TeV cm 2 s) –1 at 90% confidence assuming an E –2 spectrum. This corresponds to 4.5% of IceCube's astrophysical diffuse flux. Overall, we find no indication that alert events in general are linked to lower-energetic continuous or transient neutrino emission.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Detecting Anomalies in Time Series Using Kernel Density Approaches

This paper introduces a novel anomaly detection approach tailored for time series data with exclusive reliance on normal events during training. Our key innovation lies in the application of kernel-density estimation (KDE) to scrutinize reconstruction errors, providing an empirically derived probability distribution for normal events post-reconstruction. This non-parametric density estimation technique offers a nuanced understanding of anomaly detection, differentiating it from prevalent threshold-based mechanisms in existing methodologies. In post-training, events are encoded, decoded, and evaluated against the estimated density, providing a comprehensive notion of normality. In addition, we propose a data augmentation strategy involving variational autoencoder-generated events and a smoothing step for enhanced model robustness. The significance of our autoencoder-based approach is evident in its capacity to learn normal representation without prior anomaly knowledge. Through the KDE step on reconstruction errors, our method addresses the versatility of anomalies, departing from assumptions tied to larger reconstruction errors for anomalous events. Our proposed likelihood measure then distinguishes normal from anomalous events, providing a concise yet comprehensive anomaly detection solution. The extensive experimental results support the feasibility of our proposed method, yielding significantly improved classification performance by nearly 10% on the UCR benchmark data.

Frehner, Robin↗
DOE OSTI2022

Node Monitoring as a Fault Detection Countermeasure against Information Leakage within a RISC-V Microprocessor

Advanced, superscalar microprocessors (μP) are highly susceptible to wear-out failures because of their highly complex, densely packed circuit structure and extreme operational frequencies. Although many types of fault detection and mitigation strategies have been proposed, none have addressed the specific problem of detecting faults that lead to information leakage events on I/O channels of the μP. Information leakage can be defined very generally as any type of output that the executing program did not intend to produce. In this work, we restrict this definition to output that represents a security concern, and in particular, to the leakage of plaintext or encryption keys, and propose a counter-based countermeasure to detect faults that cause this type of leakage event. Fault injection (FI) experiments are carried out on two RISC-V microprocessors emulated as soft cores on a Xilinx multi-processor System-on-chip (MPSoC) FPGA. The μP designs are instrumented with a set of counters that records the number of transitions that occur on internal nodes. The transition counts are collected from all internal nodes under both fault-free and faulty conditions, and are analyzed to determine which counters provide the highest fault coverage and lowest latency for detecting leakage faults. We show that complete coverage of all leakage faults is possible using only a single counter strategically placed within the branch compare logic of the μPs.

42 ENGINEERING↗
DOE OSTI2021

Gamma-ray burst detection prospects for next generation ground-based VHE facilities

ABSTRACT Gamma-ray Bursts (GRB) were discovered by satellite-based detectors as powerful sources of transient γ-ray emission. The Fermi satellite detected an increasing number of these events with its dedicated Gamma-ray Burst Monitor (GBM), some of which were associated with high energy photons ($E \gt 10$ GeV), by the Large Area Telescope (LAT). More recently, follow-up observations by Cherenkov telescopes detected very high energy emission ($E \gt 100$ GeV) from GRBs, opening up a new observational window with implications on the interpretation of their central engines and on the propagation of very energetic photons across the Universe. Here, we use the data published in the 2nd Fermi-LAT Gamma Ray Burst Catalogue to characterize the duration, luminosity, redshift, and light curve of the high energy GRB emission. We extrapolate these properties to the very high energy domain, comparing the results with available observations and with the potential of future instruments. We use observed and simulated GRB populations to estimate the chances of detection with wide-field ground-based γ-ray instruments. Our analysis aims to evaluate the opportunities of the Southern Wide-field-of-view Gamma-ray Observatory (SWGO), to be installed in the Southern Hemisphere, to complement CTA. We show that a low-energy observing threshold ($E_{low} \lt 200$ GeV), with good point source sensitivity ($F_{lim} \approx 10^{-11} \,\mathrm{erg\, cm^{-2}\, s^{-1}}$ in $1$ yr), are optimal requirements to work as a GRB trigger facility and to probe the burst spectral properties down to time-scales as short as $10$ s, accessing a time domain that will not be available to Imaging Atmospheric Cherenkov Telescopes instruments.

La Mura, G. (ORCID:000000018553499X)↗
DOE OSTI2021

Modulating Electron Beam–Sample Interactions in Imaging and Diffraction Modes by Dose Fractionation with Low Dose Rates

Abstract Technological opportunities are explored to enhance detection schemes in transmission electron microscopy (TEM) that build on the detection of single-electron scattering events across the typical spectrum of interdisciplinary applications. They range from imaging with high spatiotemporal resolution to diffraction experiments at the window to quantum mechanics, where the wave-particle dualism of single electrons is evident. At the ultimate detection limit, where isolated electrons are delivered to interact with solids, we find that the beam current dominates damage processes instead of the deposited electron charge, which can be exploited to modify electron beam-induced sample alterations. The results are explained by assuming that all electron scattering are inelastic and include phonon excitation that can hardly be distinguished from elastic electron scattering. Consequently, a coherence length and a related coherence time exist that reflect the interaction of the electron with the sample and change linearly with energy loss. Phonon excitations are of small energy (<100 meV), but they occur frequently and scale with beam current in the irradiated area, which is why we can detect their contribution to beam-induced sample alterations and damage.

47 OTHER INSTRUMENTATION↗