Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Research Update: Stoichiometry controlled oxide thin film growth by pulsed laser deposition

The oxidation of species in the plasma plume during pulsed laser deposition controls both the stoichiometry as well as the growth kinetics of the deposited SrTiO{sub 3} thin films, instead of the commonly assumed mass distribution in the plasma plume and the kinetic energy of the arriving species. It was observed by X-ray diffraction that SrTiO{sub 3} stoichiometry depends on the composition of the background gas during deposition, where in a relative small pressure range between 10{sup −2} mbars and 10{sup −1} mbars oxygen partial pressure, the resulting film becomes fully stoichiometric. Furthermore, upon increasing the oxygen (partial) pressure, the growth mode changes from 3D island growth to a 2D layer-by-layer growth mode as observed by reflection high energy electron diffraction.

36 MATERIALS SCIENCE↗

Morphological, structural and thermal studies of gallium nitride ferrite

We report the synthesis and Characterization of III-V doped Nano ferrite Ga{sub (2x+2)}N Fe{sub 2(49-x)}O{sub 3} for x=1 and x=5 by Sol-Gel method. The Morphological, structural and Thermal characterisation studies are done by using Transmission Electron Microscopy, Energy Dispersive X-ray Analysis, Selected Area Electron Diffraction, Thermo-Gravimetric Analysis and Differential Thermal Analysis. Using the Sci-Finder software we could not trace any reports related to GaNFe{sub 2}O{sub 3} in the literature. It has been observed from our studies that the particles are in the Cylindrical and the Globular structure. The particle diameter values from the Histograms are in good agreement with the XRD values that were communicated by us earlier. The SAED and the EDAX studies reveal the confirmation of the composition and also that the synthesized Ferrite exhibits crystalline nature. The TG-DTA results show that the compound indicates constant sample weight.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In-situ quantification of the surface roughness for facile fabrications of atomically smooth thin films

Here in this work we present an in-situ technique to quantify the layer-by-layer roughness of thin films and heterostructures by measuring the spectral profile of the reflection high-energy electron diffraction (RHEED). The characteristic features of the diffraction spot, including the vertical to lateral size ratio c/b and the asymmetrical ratio c 1 /c 2 along the vertical direction, are found to be quantitatively dependent on the surface roughness. The quantitative relationships between them are established and discussed for different incident angles of high-energy electrons. As an example, the surface roughnesses of LaCoO 3 films grown at different temperatures are obtained using such an in-situ technique, which are confirmed by the ex-situ atomic force microscopy. Moreover, the in-situ measured layer-by-layer roughness oscillations of two LaCoO 3 films are demonstrated, revealing drastically different information from the intensity oscillations. The experiments assisted with the in-situ technique demonstrate an outstanding high resolution down to similar to ~0.1 Å. Therefore, the new quantitative RHEED technique with real-time feedbacks significantly escalates the thin film synthesis efficiency, especially for achieving atomically smooth surfaces and interfaces. It opens up new prospects for future generations of thin film growth, such as the artificial intelligence-assisted thin film growth.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Residual stress induced crystalline to amorphous phase transformation in Nb{sub 2}O{sub 5} quantum dots

Nb{sub 2}O{sub 5} quantum dots (QDs) were grown using a simple technique of vacuum thermal evaporation. QDs were found to be crystalline in nature by selected area electron diffraction (SAED) in TEM. Samples with thickness up to 20 nm did not show any significant residual strain. Residual stress effect on band gap of crystalline Nb{sub 2}O{sub 5} was studied for films thicker than 20 nm. Residual strain was determined using SAED of the films with reference to powder X-ray diffraction (XRD). Films thicker than 45 nm become amorphous as analyzed by both SAED and XRD. The optical absorption of films in the range 25–60 nm indicates significantly varying optical band gap of films. The varying band gap with film thickness scales linearly very well with the variation of residual stress with film thickness. The residual stress dependence of band gap of crystalline films yields stress free band gap as 3.37 eV with pressure coefficient of band gap (∂E{sub g}/∂P){sub T} = −29.3 meV/GPa. From this study, the crystalline to amorphous transformation in tetragonal form of M-Nb{sub 2}O{sub 5} has been determined to be at about 14 GPa. Both pressure coefficient of band gap and crystalline to amorphous transition for tetragonal M-Nb{sub 2}O{sub 5} have been determined for the first time in the literature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural disorder, octahedral coordination and two-dimensional ferromagnetism in anhydrous alums

The crystal structures of the triangular lattice, layered anhydrous alums KCr(SO{sub 4}){sub 2}, RbCr(SO{sub 4}){sub 2} and KAl(SO{sub 4}){sub 2} are characterized by X-ray and neutron powder diffraction (NPD) at temperatures between 1.4 and 773 K. The compounds all crystallize in the space group P3-bar, with octahedral coordination of the trivalent cations. In all cases, small amounts of disorder in the stacking of the triangular layers of corner sharing MO{sub 6} octahedra and SO{sub 4} tetrahedra is seen, with the MO{sub 6}-SO{sub 4} network rotated in opposite directions between layers. The electron diffraction study of KCr(SO{sub 4}){sub 2} supports this model, which on an average can be taken to imply trigonal prismatic coordination for the M{sup 3+} ions; as was previously reported for the prototype anhydrous alum, KAl(SO{sub 4}){sub 2}. The temperature-dependent magnetic susceptibilities for ACr(SO{sub 4}){sub 2} (A=K, Rb, Cs) indicate the presence of predominantly ferromagnetic interactions. Low-temperature powder neutron diffraction reveals that the magnetic ordering is ferromagnetic in-plane, with antiferromagnetic ordering between planes below 3 K. - Graphical abstract: The anhydrous alums KCr(SO{sub 4}){sub 2}, RbCr(SO{sub 4}){sub 2} and KAl(SO{sub 4}){sub 2} are characterized by X-ray and neutron powder diffraction and TEM diffraction. All compounds have octahedral coordination of the trivalent cations. Stacking disorder is observed, with the MO{sub 6}-SO{sub 4} network of polyhedra rotated in opposite directions between layers. Low-temperature NPD reveals ferromagnetic in-plane ordering, with antiferromagnetic ordering between planes below 3 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron microscopy study of the formation mechanism of catalytic nickel-rich particles and the role of carbonyl sulphide in the suppression of carbon deposition on 20Cr-25Ni steel

Highlights: • Carbon deposition has been significantly reduced under the presence of CoS. • The origin of catalytic nickel-rich particles in stainless steel revealed • High resolution EDS study showed that sulphur was observed to be surrounding nickel-rich particles. - Abstract: Austenitic stainless steel is used as fuel cladding in advanced gas-cooled nuclear reactors (AGR). At elevated temperatures, when the steel is exposed to CO{sub 2} based environments filamentary carbon deposits form on the surface of the steel. This filamentary carbon deposition is known to be catalysed by metallic nickel-rich particles. Adding trace amount of carbonyl sulphide (COS) into the gas mixtures suppresses the carbon deposition. In this current work, it has been shown that at 600 °C, the formation of filamentary carbon was suppressed by the addition of 215 ppb COS to a depositing gas mixture (containing approximately 1000 vppm C{sub 2}H{sub 4}/1% CO/bal. CO{sub 2}) which was known to provide the environment suitable for carbon deposition. Samples exposed to the gas mixtures with and without 215 ppb COS were characterised using electron microscopy techniques to understand the formation mechanism of the nickel-rich particles and the inhibition mechanism due to the addition of COS. Electron diffraction study shows that the nickel-rich particles in the oxide layers assume the same crystallography as that of the austenitic metal underneath, regardless of the COS addition. The current observations also show that the metal-oxide interfaces was nickel-rich and a simple model has been proposed to explain the formation of nickel-rich particles within the subsurface oxide. Furthermore, it was found that when COS was added the surface of the nickel-rich particles in the oxide layer was found to be sulphur-rich by energy dispersive spectroscopy (EDS) on a scanning transmission electron microscope (STEM). It is believed that the surface sulphur adsorption onto the nickel-rich particles, rather than bulk sulphide formation, resulted in the inhibition of carbon deformation on the steel.

36 MATERIALS SCIENCE↗

Si substrates texturing and vapor-solid-solid Si nanowhiskers growth using pure hydrogen as source gas

Scanning and transmission electron microscopies have been used to study silicon substrate texturing and whisker growth on Si substrates using pure hydrogen source gas in a tungsten hot filament reactor. Substrate texturing, in the nanometer to micrometer range of mono- and as-cut multicrystalline silicon, was observed after deposition of WSi{sub 2} particles that acted as a mask for subsequent hydrogen radical etching. Simultaneous Si whisker growth was observed for long residence time of the source gas and low H{sub 2} flow rate with high pressure. The whiskers formed via vapor-solid-solid growth, in which the deposited WSi{sub 2} particles acted as catalysts for a subsequent metal-induced layer exchange process well below the eutectic temperature. In this process, SiH{sub x} species, formed by substrate etching by the H radicals, diffuse through the metal particles. This leads to growth of crystalline Si whiskers via metal-induced solid-phase crystallization. Transmission electron microscopy, electron diffraction, and x-ray energy dispersive spectroscopy were used to study the WSi{sub 2} particles and the structure of the Si substrates in detail. It has been established that the whiskers are partly crystalline and partly amorphous, consisting of pure Si with WSi{sub 2} particles on their tips as well as sometimes being incorporated into their structure.

36 MATERIALS SCIENCE↗

Monoclinic nanodomains in morphotropic phase boundary Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}–PbTiO{sub 3}

Crystalline structure is a fundamental characteristic of many materials, and drastic changes in properties may accompany crystal phase transitions. A prominent example of this is the morphotropic phase boundary of (Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-PbTiO{sub 3}) single crystal, a region that exhibits a high piezoelectric effect. Although the highest piezoelectricity is often attributed to a monoclinic crystal phase, formation of ferroelectric nanodomains (NDs) complicates understanding of this crystal structure. In this Letter, we report dedicated transmission electron microscopy and electron diffraction analysis to understand the crystal structure at the ND level. Splitting of diffraction spots, caused by very small lattice distortion in the NDs, is important to understanding crystal structure and has been unambiguously observed. The results can be explained by monoclinic phase NDs. Combining these results with our previous findings on ND dynamics [Sato et al. Phys. Rev. Lett. 107, 187601 (2011)], monoclinic NDs can potentially make a considerable contribution to the piezoelectricity in these materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An Anomalous Electron Configuration Among 3d Transition Metal Atoms

Physical properties of materials are mainly determined by valence electron configurations, where different valence shells would induce divergent phenomena. In compounds containing Sc 2+ , 3d electron occupancy is expected, same as other transition metal atoms like Ti 3+ . But this situation still awaits experimental verification. In this work, we selected ScS to measure the valence electron density and orbital population of Sc2+ through delicate quantitative convergent-beam electron diffraction. Though the [Ar]3d 1 configuration is confirmed in ionic Sc 2+ , the unintuitive occupation of 4s orbital is concluded with the absence of 3d orbital features around Sc-atom sites and nearly bare population of t2g orbital. It should be the first time to report this special electron configuration in a transition metal compound, in which 4s rather than 3d orbital is preferred. Our findings reveal the distinct behavior of Sc, and probable ways to modulate material properties by controlling electron orbitals.

36 MATERIALS SCIENCE↗

Studies on linear, nonlinear optical and excited state dynamics of silicon nanoparticles prepared by picosecond laser ablation

We report results from our studies on the fabrication and characterization of silicon (Si) nanoparticles (NPs) and nanostructures (NSs) achieved through the ablation of Si target in four different liquids using ∼2 picosecond (ps) pulses. The consequence of using different liquid media on the ablation of Si target was investigated by studying the surface morphology along with material composition of Si based NPs. The recorded mean sizes of these NPs were ∼9.5 nm, ∼37 nm, ∼45 nm and ∼42 nm obtained in acetone, water, dichloromethane (DCM) and chloroform, respectively. The generated NPs were characterized by selected area electron diffraction (SAED), high resolution transmission microscopy (HRTEM), Raman spectroscopic techniques and Photoluminescence (PL) studies. SAED, HRTEM and Raman spectroscopy data confirmed that the material composition was Si NPs in acetone, Si/SiO{sub 2} NPs in water, Si-C NPs in DCM and Si-C NPs in chloroform and all of them were confirmed to be polycrystalline in nature. Surface morphological information of the fabricated Si substrates was obtained using the field emission scanning electron microscopic (FESEM) technique. FESEM data revealed the formation of laser induced periodic surface structures (LIPSS) for the case of ablation in acetone and water while random NSs were observed for the case of ablation in DCM and chloroform. Femtosecond (fs) nonlinear optical properties and excited state dynamics of these colloidal Si NPs were investigated using the Z-scan and pump-probe techniques with ∼150 fs (100 MHz) and ∼70 fs (1 kHz) laser pulses, respectively. The fs pump-probe data obtained at 600 nm consisted of single and double exponential decays which were tentatively assigned to electron-electron collisional relaxation (<1 ps) and non-radiative transitions (>1 ps). Large third order optical nonlinearities (∼10{sup −14} e.s.u.) for these colloids have been estimated from Z-scan data at an excitation wavelength of 680 nm suggesting that the colloidal Si NPs find potential applications in photonic devices.

36 MATERIALS SCIENCE↗

Surface and interface structures of epitaxial Sb 2 Se 3 on mica

Sb 2 Se 3 thin film is an emerging photon absorber used in solar cells. We report the study of surface and interface structures of Sb2Se3(1 2 0) film grown on mica substrate by a high-rate vapor transport method. The interface epitaxial relationship between Sb 2 Se 3 and mica examined by the cross- sectional TEM images and diffraction patterns along the [0 0 1] and [10] directions of Sb 2 Se 3 reveal a rectangular structure with lengths of 4.03 ± 0.1 Å and 5.29 ± 0.1 Å, consistent with the [1 2 0] out-of-plane direction of Sb 2 Se 3 bulk lattice parameters. In contrast, the two-dimensional reciprocal space map (2D map) constructed from azimuthal reflection high-energy electron diffraction (ARHEED) patterns from the surface exhibits a decorated hexagonal structure. This surface structure emerges from six epitaxial orientation domains/rods and each domain has a rectangular unit mesh of 3.94 ± 0.09 Å and 26.95 ± 1.16 Å along the [0 0 1] and [10] directions. The 26.95 Å is consistent with the unit mesh of the outermost layer of the Sb 2 Se 3 (1 2 0) domains/rods. Overall, our 2D map reveals surface information that are not easily observed by other diffraction techniques.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Intermetallic compound formation at Cu-Al wire bond interface

Intermetallic compound (IMC) formation and evolution at Cu-Al wire bond interface were studied using focused ion beam /scanning electron microscopy, transmission electron microscopy (TEM)/energy dispersive x-ray spectroscopy (EDS), nano beam electron diffraction (NBED) and structure factor (SF) calculation. It was found that discrete IMC patches were formed at the Cu/Al interface in as-packaged state and they grew toward Al pad after high temperature storage (HTS) environment at 150 Degree-Sign C. TEM/EDS and NBED results combined with SF calculation revealed the evidence of metastable {theta} Prime -CuAl{sub 2} IMC phase (tetragonal, space group: I4m2, a = 0.404 nm, c= 0.580 nm) formed at Cu/Al interfaces in both of the as-packaged and the post-HTS samples. Two feasible mechanisms for the formation of the metastable {theta} Prime -CuAl{sub 2} phase are discussed based on (1) non-equilibrium cooling of wire bond that is attributed to highly short bonding process time and (2) the epitaxial relationships between Cu and {theta} Prime -CuAl{sub 2}, which can minimize lattice mismatch for {theta} Prime -CuAl{sub 2} to grow on Cu.

36 MATERIALS SCIENCE↗

In situ electric field induced domain evolution in Ba(Zr{sub 0.2}Ti{sub 0.8})O{sub 3}-0.3(Ba{sub 0.7}Ca{sub 0.3})TiO{sub 3} ferroelectrics

In this work, the lead-free Ba(Zr{sub 0.2}Ti{sub 0.8})O{sub 3}-0.3(Ba{sub 0.7}Ca{sub 0.3})TiO{sub 3} piezoelectric ceramic was investigated in situ under an applied electric field by transmission electron microscopy. Significant changes in domain morphology of the studied material have been observed under an applied electric field. During the poling process, the domain configurations disappeared, forming a single-domain state. This multi- to single-domain state transition occurred with the formation of an intermediate nanodomain state. After removing the electric field, domain configurations reappeared. Selected area electron diffraction during electrical poling gave no indication of any structural changes as for example reflection splitting. Rather, a contribution of the extrinsic effect to the piezoelectric response of the Ba(Zr{sub 0.2}Ti{sub 0.8})O{sub 3}-0.3(Ba{sub 0.7}Ca{sub 0.3})TiO{sub 3} was found to be dominant.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A new tetragonal phase in CoFeCrGe Heusler alloy

Highlights: • CoFeCrGe ribbons were prepared. The ribbons annealed at 500 °C are composed of three compounds. • The primary compound is the L2{sub 1}-type with a = 0.571 nm and the B2 type with a = 0.286 nm in further disorder case. • The secondary compound has a cubic Cr{sub 3}Ge structure with a = 0.461 nm. • The tertiary compound is a new tetragonal structure with lattice parameters a = 0.76 nm, c = 0.284 nm. • The difference in the magnetic hysteresis loops of the samples annealed at 300 °C and 500 °C has been interpreted. - Abstract: CoFeCrGe ribbons were prepared by melt spinning and then annealed at 300 °C for 4 h and 500 °C for 4 h, respectively. The as-spun ribbons of CoFeCrGe have the B2 type structure with a = 0.287 nm. The CoFeCrGe ribbons annealed at 300 °C are composed mainly of the L2{sub 1} type structure with a = 0.578 nm in partial disorder and the B2 type structure with a = 0.289 nm in further disorder case. The ribbons annealed at 500 °C are composed of three compounds with average compositions of Co{sub 26.0}Fe{sub 26.5}Cr{sub 23.5}Ge{sub 24.0}, Co{sub 3.8}Fe{sub 6.4}Cr{sub 68.5}Ge{sub 21.3} and Co{sub 53.4}Fe{sub 30.4}Cr{sub 8.6}Ge{sub 7.6}, listed in a sequence of volume percentage from major to minor. The primary compound Co{sub 26.0}Fe{sub 26.5}Cr{sub 23.5}Ge{sub 24.0} is the L2{sub 1}-type structure with a = 0.571 nm in partial disorder and the B2 type structure with a = 0.286 nm in further disorder case. The secondary compound Co{sub 3.8}Fe{sub 6.4}Cr{sub 68.5}Ge{sub 21.3} has a cubic Cr{sub 3}Ge structure with a = 0.461 nm. The tertiary compound Co{sub 53.4}Fe{sub 30.4}Cr{sub 8.6}Ge{sub 7.6} is a new tetragonal structure with lattice parameters a = 0.76 nm, c = 0.284 nm, which were determined by using tilt-series electron diffraction technique in this work. The tertiary (Co, Fe)-rich phase is usually embedded in the matrix of the secondary Cr-rich phase, but there is no special orientation between the two phases. The difference in the magnetic hysteresis loops of the samples annealed at 300 °C and 500 °C has been interpreted as the appearance of the new tetragonal crystalline phase. Element doping is the possible way for further developing the single tetragonal phase or increasing the amount of this phase.

36 MATERIALS SCIENCE↗

Structural characterization and novel optical properties of defect chalcopyrite ZnGa{sub 2}Te{sub 4} thin films

Highlights: {yields} Preparation and characterization of ZnGa{sub 2}Te{sub 4} in powder and thin film forms. {yields} Structure properties such as XRD and EDX. {yields} Optical constant of the as-deposited ZnGa{sub 2}Te{sub 4} for the first time. {yields} Extraction of the optical parameters of the studied films. -- Abstract: Stoichiometric thin film samples of the ternary ZnGa{sub 2}Te{sub 4} defect chalcopyrite compound were prepared and characterized by X-ray diffraction technique. The elemental chemical composition of the prepared bulk material as well as of the as-deposited film was determined by energy-dispersive X-ray spectrometry. ZnGa{sub 2}Te{sub 4} thin films were deposited, by conventional thermal evaporation technique onto highly cleaned glass substrates. The X-ray and electron diffraction studies revealed that the as-deposited and the annealed ZnGa{sub 2}Te{sub 4} films at annealing temperature t{sub a} {<=} 548 K are amorphous, while those annealed at t{sub a} {>=} 573 K (for 1 h), are polycrystalline. The optical properties of the as-deposited films have been investigated for the first time at normal incidence in the spectral range from 500 to 2500 nm. The refractive index dispersion in the transmission and low absorption region is adequately described by the Wemple-DiDomenico single oscillator model, whereby, the values of the oscillator parameters have been calculated. The analysis of the optical absorption coefficient revealed an in-direct optical transition with energy of 1.33 eV for the as-deposited sample. This work suggested that ZnGa{sub 2}Te{sub 4} is a good candidate in solar cell devices as an absorbing layer.

36 MATERIALS SCIENCE↗

Microstructure characterization of the non-modulated martensite in Ni-Mn-Ga alloy

The microstructure of the non-modulated martensite in a Ni-Mn-Ga alloy has been characterized in detail by conventional transmission electron microscopy. Bright field images show that the martensite exhibits an internal substructure consisting of a high density of narrow twins. Using electron diffraction, it is found that the martensite has a tetragonal crystal structure. The lattice correspondence between the parent phase and the non-modulated martensite is investigated. Furthermore, the four twinning elements describing the microtwinning have been graphically and quantitatively determined. The results indicate that the microtwinning within the non-modulated martensite belongs to the compound type.

36 MATERIALS SCIENCE↗

A facile liquid phase exfoliation method to prepare graphene sheets with different sizes expandable graphite

Graphical abstract: - Highlights: • This study presented a novel method for the production of high-quality graphene sheets through the exfoliation of Li-intercalated EG with sonication. • The quality of the graphene sheets produced from different sizes EG was compared for the first time and the formation mechanism was discussed. • The graphene sheets obtained from the small size EG have less layers than the large size EG. - Abstract: In this work, graphene sheets suspension were synthesized directly from expandable graphite (EG) via an intercalation and exfoliation pathway using n-butyl lithium as the intercalating agent, water and N,N-dimethylformamide (DMF) as the exfoliating agent. The quality of the graphene sheets produced from different sizes EG was compared and the formation mechanism was discussed. The formation of the graphene sheets and its formation mechanism were confirmed by transmission electron microscopy (TEM), high-resolution TEM (HRTEM), selected area electron diffraction (SAED), Raman spectroscopy measurement, inductively coupled plasma atomic emission spectrometry (ICP-AES) and thermogravimetric analysis (TGA). The graphene sheets obtained from the small size EG have less layers than the large size EG.

36 MATERIALS SCIENCE↗

Microstructures and mechanical properties of the welded AA5182/HC340LA joint by magnetic pulse welding

Highlights: • The magnetic pulse welding of 5× aluminum alloy with high strength steel is performed. • The microstructure evolution of welding interface under different parameters is investigated. • The intermediate layer is characterized by high-resolution transmission electron microscope and electron diffraction pattern. - Abstract: Magnetic pulse welding (MPW) is an innovative joining technology for dissimilar materials. The MPW with high joining qualities could be realized between high strength steel and 5× aluminum alloys. In this work, the MPW joints between aluminum alloy (AA 5182) sheet and high-strength low alloy steel (HC340LA) sheet were prepared under various discharge energies. The mechanical properties and microstructure observations were employed to evaluate the joint performance. Results showed that a lower discharge voltage tended to cause joints with poor quality. When the discharge energy increased, the failure position gradually changed from the weld zone to the weaker base metal (Al) during quasi-static tensile tests. In addition, the effect of discharge energies on microstructure evolution in the intermediate layer was revealed by high-resolution transmission electron microscopy (HRTEM) and scanning electron microscope (SEM). Atomic-scale diffusion was found to be the mainly welding mechanism of the Al/Fe joint. The intermetallic compound (IMC) FeAl{sub 2} and ultra-fine grains (UFG) were found in the intermediate layer under high discharge energy.

36 MATERIALS SCIENCE↗