Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Efficiency as a Service”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Advances in Engine Test Capabilities at the NASA Glenn Research Center's Propulsion Systems Laboratory

The Propulsion Systems Laboratory at the National Aeronautics and Space Administration (NASA) Glenn Research Center is one of the premier U.S. facilities for research on advanced aeropropulsion systems. The facility can simulate a wide range of altitude and Mach number conditions while supplying the aeropropulsion system with all the support services necessary to operate at those conditions. Test data are recorded on a combination of steady-state and highspeed data-acquisition systems. Recently a number of upgrades were made to the facility to meet demanding new requirements for the latest aeropropulsion concepts and to improve operational efficiency. Improvements were made to data-acquisition systems, facility and engine-control systems, test-condition simulation systems, video capture and display capabilities, and personnel training procedures. This paper discusses the facility s capabilities, recent upgrades, and planned future improvements.

Pachlhofer, Peter M.↗
NASA NTRS2007

A Distributed Trajectory-Oriented Approach to Managing Traffic Complexity

In order to handle the expected increase in air traffic volume, the next generation air transportation system is moving towards a distributed control architecture, in which ground-based service providers such as controllers and traffic managers and air-based users such as pilots share responsibility for aircraft trajectory generation and management. While its architecture becomes more distributed, the goal of the Air Traffic Management (ATM) system remains to achieve objectives such as maintaining safety and efficiency. It is, therefore, critical to design appropriate control elements to ensure that aircraft and groundbased actions result in achieving these objectives without unduly restricting user-preferred trajectories. This paper presents a trajectory-oriented approach containing two such elements. One is a trajectory flexibility preservation function, by which aircraft plan their trajectories to preserve flexibility to accommodate unforeseen events. And the other is a trajectory constraint minimization function by which ground-based agents, in collaboration with air-based agents, impose just-enough restrictions on trajectories to achieve ATM objectives, such as separation assurance and flow management. The underlying hypothesis is that preserving trajectory flexibility of each individual aircraft naturally achieves the aggregate objective of avoiding excessive traffic complexity, and that trajectory flexibility is increased by minimizing constraints without jeopardizing the intended ATM objectives. The paper presents conceptually how the two functions operate in a distributed control architecture that includes self separation. The paper illustrates the concept through hypothetical scenarios involving conflict resolution and flow management. It presents a functional analysis of the interaction and information flow between the functions. It also presents an analytical framework for defining metrics and developing methods to preserve trajectory flexibility and minimize its constraints. In this framework flexibility is defined in terms of robustness and adaptability to disturbances and the impact of constraints is illustrated through analysis of a trajectory solution space with limited degrees of freedom and in simple constraint situations involving meeting multiple times of arrival and resolving a conflict.

Idris, Husni↗
NASA NTRS2013

Pilot and Controller Evaluations of Separation Function Allocation in Air Traffic Management

Two human-in-the-loop simulation experiments were conducted in coordinated fashion to investigate the allocation of separation assurance functions between ground and air and between humans and automation. The experiments modeled a mixed-operations concept in which aircraft receiving ground-based separation services shared the airspace with aircraft providing their own separation service (i.e., self-separation). Ground-based separation was provided by air traffic controllers without automation tools, with tools, or by ground-based automation with controllers in a managing role. Airborne self-separation was provided by airline pilots using self-separation automation enabled by airborne surveillance technology. The two experiments, one pilot-focused and the other controller-focused, addressed selected key issues of mixed operations, assuming the starting point of current-day operations and modeling an emergence of NextGen technologies and procedures. In the controller-focused experiment, the impact of mixed operations on controller performance was assessed at four stages of NextGen implementation. In the pilot-focused experiment, the limits to which pilots with automation tools could take full responsibility for separation from ground-controlled aircraft were tested. Results indicate that the presence of self-separating aircraft had little impact on the controllers' ability to provide separation services for ground-controlled aircraft. Overall performance was best in the most automated environment in which all aircraft were data communications equipped, ground-based separation was highly automated, and self-separating aircraft had access to trajectory intent information for all aircraft. In this environment, safe, efficient, and highly acceptable operations could be achieved for twice today's peak airspace throughput. In less automated environments, reduced trajectory intent exchange and manual air traffic control limited the safely achievable airspace throughput and negatively impacted the maneuver efficiency of self-separating aircraft through high-density airspace. In a test of scripted conflicts with ground-managed aircraft, flight crews of self-separating aircraft prevented separation loss in all conflicts with detection time greater than one minute. In debrief, pilots indicated a preference for at least five minute's alerting notice and trajectory intent information on all aircraft. When intent information on ground-managed aircraft was available, self-separating aircraft benefited from fewer conflict alerts and fewer required deviations from trajectory-based operations.

Wing, David↗
NASA NTRS1974

The economic value of remote sensing of earth resources from space: An ERTS overview and the value of continuity of service. Volume 4: Forestry, wildlife and rangeland

The economic value of ERS information in the resource management area of extensive use of living resources, forestry, wildlife, and rangeland, is determined. Timber and forage resources are quantitatively evaluated. It is shown that these resources have economic value in the tens of billions of dollars, but the economic benefits of improved management of the forests and rangelands are not limited to efficiency in the production of these commercial resources. Multiple-use values including watershed, wildlife, and recreation are also involved.

Andrews, J.↗
DOE OSTI2025

ASEAN Technical Exchange Workshop for System Operators, Regulators, and Policymakers

This presentation provides an in-depth exploration of power system planning, cross-border electricity trading, and battery energy storage systems (BESS), offering actionable insights for system operators, regulators, and policymakers. The first section delves into power system planning and analysis, focusing on capacity expansion models and resource adequacy studies, including their role in optimizing system efficiency, managing emissions, and addressing system reliability risks. Key considerations, such as integration of transmission into generation planning and the forecasting versus optimization of customer distributed energy resources (DER) technologies, are explored. The session highlights critical trade-offs in spatial granularity and model runtimes, as well as the feasibility of aligning distribution investments with capacity expansion efforts. The second section examines cross-border electricity trading, with an emphasis on resource adequacy concepts such as reliability targets, loss of load expectation (LOLE), and planning reserve margins (PRM). Case studies on reserve market design and coordination across US regions provide insights into improving reserve deliverability and managing interregional power balance and congestion. This section also addresses market-to-market congestion management, including advanced strategies for high-voltage direct current (HVDC) optimization and ancillary service delivery. Finally, the presentation covers the rapid evolution of Battery Energy Storage Systems (BESS), highlighting their operational growth, regulatory frameworks, and use cases in grid flexibility, energy storage, and reliability. The discussion focuses on the benefits of BESS for system stability, resilience, and integration of renewable energy, offering insights into its role as a vital component in the transition toward a more sustainable and flexible grid. Key performance parameters, such as throughput, round-trip efficiency, and state of charge, are also examined.

25 ENERGY STORAGE↗
NASA NTRSDate not supplied

Operational Evaluation of NASA SPoRT Lightning Safety Applications for Impact Based Decision Support Services

The NWS Office in Huntsville is tasked with monitoring and predicting the threat for lightning within its County Warning Area. These impact-based decision support services (IDSS) are provided routinely for aviation operations, irregularly for large-scale, outdoor events, and can have varying safety requirements, such as proximity to location and duration. Lightning monitoring and prediction can require the rapid synthesis of a plethora of data, so products that make this process more efficient and effective are sought by the operational community. The Huntsville NWS Office benefits from close collaboration with the NASA SPoRT Center, which is developing several products to address these operational challenges in concentrated R2O/O2R efforts. One example of this is the StopLight product, which uses Geostationary Lightning Mapper (GLM) flash extent density (FED) to provide an easy-to-interpret visual aid of lightning occurring within the last 30 minutes. The StopLight product shows both the age and location of the last lightning flash within each GLM pixel, which can be particularly useful for IDSS with determining when to resume activities or operations that have been shut down due to lightning. This presentation highlights results of collaboration between NASA SPoRT and NWS Huntsville, including testing of the Stoplight product, and additional experimental products in development. A brief summary of the lightning products are provided while the main focus will discuss product evaluation and forecaster perspective during real-time weather watch activities to support aviation operations and events where IDSS was necessary.

Kristopher White↗
DOE OSTI2022

Digitalization, Management and Synthesis of Thermal Hydraulic Legacy Data Using Dynamical System Scaling

A unique attribute of the nuclear industry is the extent by which designers, developers, operators, and regulators pay attention to demonstrating the safety case. The safety case for nuclear systems is a written, traceable expression of safety, demonstrating the system’s protective measures against uncontrolled radiological releases. The nuclear installation resiliency or safety takes overriding priority over function and performance. The preparation of the safety case heavily relies on extensive experimental campaigns that challenge the target design under a spectrum of postulated accident scenarios. For safety reasons, these experiments are typically conducted in sub-scale test apparatuses intended to reproduce the postulated accident scenarios and event sequences realistically but subject to proven similarity criteria, often referred to as scaling analyses. Since the dawn of the nuclear industry, significant resources have been committed to the construction and operation of such test facilities and a massive amount of data has been generated. Such test data have been and are still used to validate the fundamental assumptions of nuclear power plant phenomena. As we move into the digital world, capturing this multi-decades worth of information in a transparent, easily accessible, and usable manner for the public and industry stakeholders is of paramount importance. Over the last few years FPoliSolutions has been actively developing an enterprise digital data ontology platform (FPoliDON) intended to do just that. The concept was introduced in a paper at the previous NURETH edition and has been significantly enhanced since. With the vision of helping designers use the data to assess their safety case evaluation models, the platform was designed not only to ontologically organize the experimental data, but also to guide the user in the complex analytics associated with the interpretation and use of such test results. A new feature which has been recently added is the ability for the user to access a library of sophisticated mathematical procedures for performing scaling analyses. For this purpose, the Dynamical System Scaling (DSS) procedure invented by Dr. Jose’ Reyes was formulated as one of the services in the digital platform. These methods have been demonstrated to provide an excelled mathematical apparatus to identify similarity criteria or quantify distortions between measured data and the target prototypical conditions. Moreover, DSS can provide a level of synthesis across SETs and IETs which has the promise to yield efficiency in the evaluation code assessment activities. This is often a daunting and expensive task to set up evaluation models that support the safety case of current and future nuclear power plants.

Reyes, Jose↗
DOE OSTI2023

Additive-Mixing Fuel Injection (AMFI): A device for robust control and improved performance of high-efficiency LTGC engines

Low-temperature gasoline combustion (LTGC) engines can provide high efficiencies with very low NOx and particulate emissions. Despite these major advantages, methods for controlling LTGC combustion timing, achieving robust autoignition, and good low-load performance have challenged the development of practical LTGC engines. A key reason is that the ideal reactivity of the fuel varies with operating conditions, with low-reactivity fuels working well at high loads and higher-reactivity fuels working better at low loads. This article introduces a new technique called Additive Mixing Fuel Injection (AMFI) that adjusts the reactivity of the gasoline to obtain good performance over the operating map. Moreover, AMFI can provide robust combustion-timing control because it precisely meters very small amounts (0.01–0.6 mm 3 ) of an ignition-enhancing additive into the fuel each engine cycle. The additive used was 2-ethylhexyl nitrate (EHN), a common, inexpensive diesel-fuel ignition improver, but other additives could be used. Because additive amounts are so small, a 2-gal reservoir would be sufficient for medium-duty applications with refilling only at service intervals of about 8000 mi. The AMFI system has been installed on a single-cylinder LTGC research engine and demonstrated to provide robust combustion-timing control over wide ranges of combustion phasing, fueling rate, intake boost, engine speed, and intake temperature. AMFI also increases the fuel’s reactivity sufficiently to greatly reduce or eliminate the need for charge heating, simplifying engine design and significantly increasing thermal efficiency and the maximum load at low-boost conditions. The nitrogen in the EHN produced a modest increase in NOx, but it was mitigated by lower intake temperatures, and NOx emissions remained very low. Finally, the additive increases the sensitivity of autoignition reactions to variations in the local fuel/air mixture within the charge. This allows the use of controlled fuel stratification for improved LTGC-engine performance, and its potential to improve low-load operation was demonstrated.

Dec, John E.↗
DOE OSTI2020

Mobility Data and Models Informing Smart Cities

This presentation explores the interactions of Emerging Technology, Changing Urban Environments, and Urban Travel Behavior on Mobility and Energy Impacts. Key findings include quantifying impacts of emerging mobility, access and infrastructure associated with new mobility choices and services in urban areas. The results demonstrate new data collection methods and capabilities to understand and identify key levers to improve energy productivity of future mobility systems and of quickly evolving MaaS and COVID-19 contexts to monitor rapidly shifting urban mobility patterns. Under development are mode choice models for new modes versus traditional modes. Initial estimates are developed on the potential of workforce mobility strategies in shaping future energy-efficient mobility system impacts. For mode replacement and workforce mobility, this presentation offers observability into the changes in number of transactions per mode, after ride-hailing/TNC/MaaS introduction and in origins of workforce to enable user need-driven reimagining of efficient mobility systems: Seattle (SEA-TAC) airport: for every 100 new TNC transactions for ground transportation, ~27% replaced transit, 35% replaced parking, 17% replaced car rentals, and 21% replaced taxis. Similarly, at Denver International (DEN), ride-hailing transactions replaced transit, parking, car rental and taxis at a rate of 34.7%, 39.0%, 16.6%, and 9.7%, respectively. A workforce mobility tool, analysis/visualization techniques, and capabilities to understand and identify key job commute needs, new choices in access to job opportunities, and affordability aspects as levers to improve energy productivity of future integrated urban mobility systems.

ADVANCED PROPULSION SYSTEMS,ENERGY PLANNING, POLIC↗
NASA NTRS2006

Overview of Energy Storage Technologies for Space Applications

This presentations gives an overview of the energy storage technologies that are being used in space applications. Energy storage systems have been used in 99% of the robotic and human space missions launched since 1960. Energy storage is used in space missions to provide primary electrical power to launch vehicles, crew exploration vehicles, planetary probes, and astronaut equipment; store electrical energy in solar powered orbital and surface missions and provide electrical energy during eclipse periods; and, to meet peak power demands in nuclear powered rovers, landers, and planetary orbiters. The power source service life (discharge hours) dictates the choice of energy storage technology (capacitors, primary batteries, rechargeable batteries, fuel cells, regenerative fuel cells, flywheels). NASA is planning a number of robotic and human space exploration missions for the exploration of space. These missions will require energy storage devices with mass and volume efficiency, long life capability, an the ability to operate safely in extreme environments. Advanced energy storage technologies continue to be developed to meet future space mission needs.

fuel cells↗
DOE OSTI2022

Memory access response merging in a memory hierarchy

A system and method for efficiently processing memory requests are described. A computing system includes multiple compute units, multiple caches of a memory hierarchy and a communication fabric. A compute unit generates a memory access request that misses in a higher level cache, which sends a miss request to a lower level shared cache. During servicing of the miss request, the lower level cache merges identification information of multiple memory access requests targeting a same cache line from multiple compute units into a merged memory access response. The lower level shared cache continues to insert information into the merged memory access response until the lower level shared cache is ready to issue the merged memory access response. An intermediate router in the communication fabric broadcasts the merged memory access response into multiple memory access responses to send to corresponding compute units.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Expert perspectives on the wind plant of the future

Abstract Wind power technology has changed rapidly in recent years. Technology innovation, evolving power markets, and competing land and ocean uses continue to influence the design and operation of wind turbines and plants. Anticipating these trends and their impact on future facilities can inform commercial strategies and research priorities. Drawing from a recent survey of 140 of the world's foremost wind experts, we identify expectations of future wind plant design in 2035, both for onshore and offshore wind. Experts anticipate continued growth in turbine size, to 5.5 (onshore) and 17 MW (offshore), with plants located in increasingly less favorable wind and siting regimes. They expect plant sizes of 1,100 MW for fixed‐bottom and 600 MW for floating offshore wind. Experts forecast enhanced grid‐system value from wind through significant to widespread use of larger rotors, hybrid projects with batteries and hydrogen production, and more. To explain experts' perspectives on future plant design and operation, we identify five mechanisms: economies of unit, plant, and resource scale; grid‐system value economies; and production efficiencies. We characterize learning effects as a moderating influence on the strength of these mechanisms. In combination, experts predict that these design choices support levelized cost of energy reductions of 27% (onshore) and 17%–35% (floating and fixed‐bottom offshore) by 2035 compared to today, while enhancing wind energy's grid service offerings. Our findings provide a much‐needed benchmark for representing future wind technologies in power sector models and address a critical research gap by explaining the economics behind wind energy design choices.

17 WIND ENERGY↗
DOE OSTI2024

Utility-Scale Shared Energy Storage Deployment: Challenges, Research Gaps, and Opportunities

Although community energy storage (CES) and behind-the-meter (BTM) energy storage systems have been widely used to offer homeowners and communities a variety of localized benefits, their scalability and grid support functionalities are limited. On the other hand, utility-scale shared energy storage (USES) systems may offer a number of benefits for grid integration, scalability, and economic viability. When compared to BTM and CES alternatives, these large-scale systems provide more storage capacity, more efficient operations, and more economically viable options. The deployment of USES presents opportunities for optimizing grid performance, integrating renewable energy resources, and improving energy security at the community level. However, significant research gaps exist in optimizing the integration and operation of these systems, especially to allocate energy for consumer use, grid services, and enhancing energy resilience. This paper reviews the literature in this regard, focusing on the opportunities, research gaps, and challenges associated with USES deployment. Firstly, the paper provides an overview of USES systems and emphasizes their benefits. Secondly, the key challenges are identified, and research gaps associated with the operation and integration of these systems are highlighted. Lastly, some potential solutions and opportunities that can be adopted to facilitate the rapid deployment and management of USES are presented. Technological, economic, regulatory, and environmental aspects are also discussed in this paper, providing an overview of the current state and future prospects of this technology.

Gautam, Mukesh [BATTELLE (PACIFIC NW LAB)] (ORCID:↗
DOE OSTI2026

Optimal Methods for Estimating Cactus Pear Biomass Using Cladode Dimensions of Morphologically Diverse Accessions

Current allometric methods for photosynthetic-stem (cladode) plants, such as cactus pear (Opuntia spp.), require refinement to be used in field settings in which diverse accessions are grown. We analysed cladode dimensional data using 14 accessions representing four species and two hybrids to quantify statistically significant morphological differences among accessions and derived cross-accession models to approximate cladode fresh weight. A Box model using cladode dimensions (e.g., length, width, thickness and diameter) and factorial combinations of these measures (e.g., length*width*thickness*diameter vs. fresh weight) resulted in the highest coefficient of determination (R 2 = 0.95 general fit) across all accessions for estimating fresh weight along with parsimony estimates using the Schwarz–Bayes Criterion (SBC), which assesses the most consistent performance on individual accessions. A Fitting-box modelling approach used the measured cladode area captured using ImageJ (R 2 = 0.93 general fit). Lastly, an Elliptical model used an elliptical approximation for the measured area and performed well over all accessions (R 2 = 0.94 general fit) while avoiding extensive manual measurements. These models meet or exceed the performance of previously published approaches when applied across morphologically diverse accessions, providing efficient tools for nondestructive estimation of cactus pear biomass under the conditions tested.

Opuntia↗
DOE OSTI2024

Accelerating FEM-Based Corrosion Predictions Using Machine Learning

Atmospheric corrosion of metallic parts is a widespread materials degradation phenomena that is challenging to predict given its dependence on many factors (e.g. environmental, physiochemical, and part geometry). For materials with long expected service lives, accurately predicting the degree to which corrosion will degrade part performance is especially difficult due to the stochastic nature of corrosion damage spread across years or decades of service. The Finite Element Method (FEM) is a computational technique capable of providing accurate estimates of corrosion rate by numerically solving complex differential Eqs. characterizing this phenomena. Nevertheless, given the iterative nature of FEM and the computational expense required to solve these complex equations, FEM is ill-equipped for an efficient exploration of the design space to identify factors that accelerate or deter corrosion, despite its accuracy. In this work, a machine learning based surrogate model capable of providing accurate predictions of corrosion with significant computational savings is introduced. Specifically, this work leverages AdaBoosted Decision trees to provide an accurate estimate of corrosion current per width given different values of temperature, water layer thickness, molarity of the solution, and the length of the cathode for a galvanic couple of aluminum and stainless steel.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Power Electronics Based Self-Monitoring and Diagnosing for Photovoltaic Systems

Faults in photovoltaic (PV) systems can seriously affect the efficiency, energy yield, cost, safety, and reliability of PV plants. Condition monitoring of PV plants is, therefore, a very important approach to estimating the health condition of PV modules and power electronics in the system. However, additional hardware for PV system monitoring adds cost to the system's operation; delayed maintenance service also causes additional energy production loss. The Center for Power Electronics Systems (CPES) at the Virginia Polytechnic Institute and State University and Siemens Cooperate Research developed the online impedance measurement for a PV panel self-monitoring and diagnosing technology using the DC-DC converter connected to the panel. Small-signal impedances of a monocrystalline silicon PV panel were modeled and simulated to reflect fault conditions such as the short-circuit, hot-spot, and junction box faults. Modeling and simulation results were validated firstly using a test setup consisting of a solar simulator, a network analyzer, small-signal injectors, and a monocrystalline PV panel rated at 300 W.

14 SOLAR ENERGY↗
DOE OSTI2022

Caffeine: CoArray Fortran Framework of Efficient Interfaces to Network Environments

This paper provides an introduction to the CoArray Fortran Framework of Efficient Interfaces to Network Environments (Caffeine), a parallel runtime library built atop the GASNet-EX exascale networking library. Caffeine leverages several non-parallel Fortran features to write type- and rank-agnostic interfaces and corresponding procedure definitions that support parallel Fortran 2018 features, including communication, collective operations, and related services. One major goal is to develop a runtime library that can eventually be considered for adoption by LLVM Flang, enabling that compiler to support the parallel features of Fortran. The paper describes the motivations behind Caffeine's design and implementation decisions, details the current state of Caffeine's development, and previews future work. We explain how the design and implementation offer benefits related to software sustainability by lowering the barrier to user contributions, reducing complexity through the use of Fortran 2018 C-interoperability features, and high performance through the use of a lightweight communication substrate.

Rouson, Damian↗
NASA NTRS1978

NASA/General Electric Engine Component Improvement Program

The Engine Component Improvement (ECI) Program has been initiated in connection with projects designed to reduce the impact of the world-wide energy crisis in the area of aviation. The two parts of the ECI program have the overall objective to identify and quantify the sources and causes of CF6 engine performance deterioration, and to reduce the fuel consumption of CF6 engines through the development and the incorporation of various performance improvement concepts. The CF6 high-bypass turbofan engine was selected as a basis for this effort, since it is expected to be a significant fuel user in commercial revenue service for the next 15 to 20 years. The first part of the ECI program represents the initial step in an effort to achieve a goal of five percent reduction in fuel usage for CF6 engines in the 1979-82 time period. The first performance improvement concept selected is an improved efficiency fan blade. Other improvements are related to a short core exhaust system and an improved high pressure turbine.

Albright, A. J.↗