Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Edge”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Sulfur Kβ X-ray emission spectroscopy: comparison with sulfur K-edge X-ray absorption spectroscopy for speciation of organosulfur compounds

Until recently, sulfur was known as a “spectroscopically silent” element because of a paucity of convenient spectroscopic probes suitable for in situ chemical speciation. In recent years the technique of sulfur K-edge X-ray absorption spectroscopy (XAS) has been used extensively in sulfur speciation in a variety of different fields. With an initial focus on reduced forms of organic sulfur, we have explored a complementary X-ray based spectroscopy – sulfur Kβ X-ray emission spectroscopy (XES) – as a potential analytical tool for sulfur speciation in complex samples. In this work, we compare and contrast the sensitivity of sulfur Kβ XES with that of sulfur K-edge XAS, and find differing sensitivities for the two techniques. In some cases an approach involving both sulfur K-edge XAS and sulfur Kβ XES may be a powerful combination for deducing sulfur speciation in samples containing complex mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The electronic structure and deexcitation pathways of an isolated metalloporphyrin ion resolved by metal L-edge spectroscopy

The local electronic structure of the metal-active site and the deexcitation pathways of metalloporphyrins are crucial for numerous applications but difficult to access by commonly employed techniques. Here, we applied near-edge X-ray absorption mass spectrometry and quantum-mechanical restricted active space calculations to investigate the electronic structure of the metal-active site of the isolated cobalt(III) protoporphyrin IX cation (CoPPIX+) and its deexcitation pathways upon resonant absorption at the cobalt L-edge. The experiments were carried out in the gas phase, thus allowing for control over the chemical state and molecular environment of the metalloporphyrin. The obtained mass spectra reveal that resonant excitations of CoPPIX+ at the cobalt L3-edge lead predominantly to the formation of the intact radical dication and doubly charged fragments through losses of charged and neutral side chains from the macrocycle. The comparison between experiment and theory shows that CoPPIX + is in a 3 A 2g triplet ground state and that competing excitations to metal-centred non-bonding and antibonding σ* molecular orbitals lead to distinct deexcitation pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the choice of reference orbitals for linear-response calculations of solution-phase K-edge X-ray absorption spectra

The simplest response theory methods for computing vertical excitation spectra in condensed-phase are configuration interaction with single excitations (CIS) and linear-response time-dependent density functional theory (TDDFT) within the Tamm–Dancoff approximation. In applications to X-ray absorption spectroscopy (XAS), methods like CIS and TDDFT that codify only single excitations into the wave function are prone to catastrophic errors in main-edge and post-edge features whose shapes act as a crucial fingerprint in structural analyses of liquids. Here, we show that these errors manifest primarily due to a lack of orbital relaxation in conventional linear-response theories and that core-ionized (n - 1-electron) references, like those of electron-affinity TDDFT, can eliminate the errors in the spectral profile, even in the highest-energy parts of the post-edge. Crucially, we find that single excitations atop core-ionized references are sufficient to elucidate liquid-phase XAS spectra with semi-quantitative accuracy, opening the door for methods like electron-affinity CIS/TDDFT to be used as efficient alternatives to higher-order wave function approaches.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Resonance plasmonic coupling: selective enhancement of band edge emission over trap state emission of CdSe quantum dots

The photoluminescence properties of quantum dots (QDs) are often enhanced by eliminating surface trap states through chemical methods. Alternatively, a physical approach is presented here for improving photoluminescence purity in QDs by employing frequency-specific plasmon resonance coupling. Emitter-bound plasmonic hybrids are designed by electrostatically binding negatively charged QDs in water to positively charged gold nanoparticles having a thin polymer coating. Herein, two types of QDs are used: (i) bare CdSe, which exhibits both band edge and trap state emission, and (ii) CdSe overcoated with a ZnS shell (CdSe/ZnS) devoid of trap state emission. Tuning the extinction spectrum of the plasmonic system to match the band edge emission of CdSe enables the selective enhancement of band edge emission over trap state emission. Excellent match in the extinction spectrum of the gold nanoparticle with both, experimentally calculated photoluminescence enhancement factor and theoretically calculated radiative rate enhancement signifies the role of frequency-specific plasmon resonance coupling. Plasmon-coupled photoluminescence of CdSe/ZnS is further investigated by varying the number density of emitter on the surface of plasmonic nanoparticle. An enhancement in the photoluminescence is observed at a lower emitter density of CdSe/ZnS and the photoluminescence enhancement factor closely follows the plasmon resonance. However, photoluminescence quenching occurs with an increase in CdSe/ZnS due to plasmon-assisted nonradiative energy transfer between nearby QDs, as indicated by a red shift in the PL maximum. These studies establish that resonance plasmonic coupling is a convenient physical strategy for tuning the intrinsic photoluminescence properties of QDs for various optoelectronic applications.

Paul, Livin↗

Transport of perpendicular edge momentum by drift-interchange turbulence and blobs

Turbulence in the vicinity of the last closed surface transports plasma momentum away from the core region toward the wall, and hence provides a momentum ''source'' that can induce net core plasma rotation as well as sheared flows in the edge. Here, numerical simulations of this process for the binormal (approximately poloidal) component of momentum are described that use a minimal two-dimensional model, in the plane perpendicular to the magnetic field, incorporating directionality (drift-waves), radial transport (Reynolds stress and blobs), and dissipation (sheath loss terms). A zonally averaged momentum conservation law is used to advance the zonal flows. The net momentum transferred to the core is shown to be influenced by a number of physical effects: dissipation, the competition between momentum transport by Reynolds stress and passive convection by particles, intermittency (the role of blobs carrying momentum), and velocity shear regulation of turbulence. It is shown that the edge momentum source adjusts to match the rate of momentum transfer into the core, keeping the edge velocity shear nearly constant. The simulation results are also compared with the predictions of quasilinear theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hydrogen bonding in methanol clusters probed by inner-shell photoabsorption spectroscopy in the carbon and oxygen K-edge regions

Hydrogen bonding in methanol clusters has been investigated by using inner-shell photoabsorption spectroscopy and density functional theory (DFT) calculations in the carbon and oxygen K-edge regions. The partial-ion-yield (PIY) curves of H(CH{sub 3}OH){sub n}{sup +} were measured as the soft x-ray absorption spectra of methanol clusters. The first resonance peak in the PIY curves, which is assigned to the {sigma}*(O-H) resonance transition, exhibits a 1.20 eV blueshift relative to the total-ion-yield (TIY) curves of molecular methanol in the oxygen K-edge region, while it exhibits a shift of only 0.25 eV in the carbon K-edge region. Decreased intensities of the transitions to higher Rydberg orbitals were observed in the PIY curves of the clusters. The drastic change in the {sigma}*(O-H) resonance transition is interpreted by the change in the character of the {sigma}*(O-H) molecular orbital at the H-donating OH site due to the hydrogen-bonding interaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spontaneous rotation sources in a quiescent tokamak edge plasma

Spontaneous rotation sources in a quiescent tokamak edge plasma are studied without an external momentum source, such as, beam injected or wall-born neutrals. Discussions are based upon example neoclassical solutions from an edge gyrokinetic particle code. The main study is performed in a DIII-D plasma [J. L. Luxon, Nucl. Fusion 42, 614 (2002)] with the ion Grad-B drift directed toward the single-null divertor. Comparison with a reversed Grad-B drift case is also shown. It is found that there is a robust spontaneous co-current toroidal plasma rotation source in the far scrape-off plasma due to the wall sheath effect. As the edge pedestal width becomes narrower, the co-current rotation in the far scrape-off becomes weaker, but there appears a stronger co-current rotation in the pedestal top/shoulder from the X-point orbit loss effect, possibly providing a co-rotation boundary condition to the core plasma. Reversal of the magnetic field and plasma current brings down the overall co-rotation, especially in the far scrape-off plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A new diagnostic of the plasma density profile near the edge transport barrier from measurements of the radial profile of the H{sub {alpha}} line intensity

An edge transport barrier is now one of the most important subjects of controlled fusion research. The edge transport barrier is located in the plasma region where hydrogen atoms readily penetrate, so the intensity of the H{sub {alpha}} (D{sub {alpha}}) line is high enough. A new diagnostic method uses the well-known property of hydrogen atoms that the ratio of the ionization rate S{sub i} to the excitation rate S{sub v} for the H{sub {alpha}} line is nearly constant over a wide range of plasma temperatures and densities. An expression has been derived that relates the radial profiles of the plasma density and H{sub {alpha}} intensity. The use of charge coupled device detectors makes it possible to measure the radial profile of H{sub {alpha}} line intensity with a resolution {approx}0.1 cm; a high intensity of the H{sub {alpha}} line ensures a high time resolution {approx}1 ms. A high resolution is thus achieved for the density profile calculated from the H{sub {alpha}} intensity profile. The method was tested when studying the plasma density profile in the region of edge transport barrier in the L-2M stellarator. It has been shown that the density gradient varies during the barrier formation and that a fine structure of the density profile correlates with a character of the plasma transport near resonance magnetic flux surfaces.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-power 1 kHz laser-plasma x-ray source for ultrafast x-ray absorption near-edge spectroscopy in the keV range

A high average power broadband x-ray source is developed in the multi-keV range, based on the thermal emission of plasmas produced with a 1 kHz fs laser focused on high Z element target. This compact ultrafast x-ray source is used to measure the x-ray absorption near-edge spectroscopy of aluminum K-edge (1.559 keV) with noise lower than 1% of the absorption edge when accumulating laser shots over a few tens of seconds. That demonstrates its suitability to study atomic and electronic structures of matter during ultrafast phase transitions among solid, liquid, or higher energy density states.

36 MATERIALS SCIENCE↗

Nonperturbative models of intermittency in edge turbulence

A theory of the probability distribution function (PDF) tails of the blob density in plasma edge turbulence is provided. A simplified model of the fast convective radial transport is used. The theoretically predicted PDF tails corroborate earlier measurements of edge transport, further confirming the strongly non-Gaussian feature of edge transport. It is found that increasing the cross-sectional spatial scale length (L{sub x} and L{sub y}) of the blob results in larger transport, whereas increasing the toroidal scale length (L{sub z}) decreases the PDF. The results imply that the PDF decreases for larger blob speed v{sub b}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A passivated codoping approach to tailor the band edges of TiO{sub 2} for efficient photocatalytic degradation of organic pollutants

We propose an effective passivated codoping approach to tailor the band edges of TiO{sub 2} by doping the host with group IVA and group VIB impurities to passive donor-acceptor complexes. A way of achieving p-type TiO{sub 2} is found, which can outspread the application range of TiO{sub 2} semiconductor. It is demonstrated that the carbon (C)/tungsten (W) codoped TiO{sub 2} has a substantial increase in the valence band edge, while leaving the conduction band edge almost unchanged, thus improving the efficiency of photocatalytic degradation of organic pollutants. In principle, the suggested approach for overcoming the p-type doping bottleneck can be applied to other wide-band-gap semiconductors.

36 MATERIALS SCIENCE↗

K-edge Absorption spectra in Warm Dense Matter

The recent development of compact, short (ps or sub-ps) X-ray sources gives access to the structural nature of short time-scale phenomena and to the study of very transient systems such as warm dense materials. Among the structural tools used for the study of static (solid) materials, X-ray Absorption Fine Structure (XAFS) spectroscopy has proven to provide useful information on the local structure (atomic arrangement) and on the electronic Density of States. In a context where the matter is disordered but highly correlated, we present K-edge absorption studies of warm, dense aluminum. The range of temperature starts from the solid and extend to the strongly correlated plasma regime. We describe here two theoretical approaches for the the calculation of the K-edge absorption features. The first one involves a (Modified) HyperNetted Chain--Neutral Pseudo Atom (MHNC-NPA) model of dense matter coupled with a specific model of the XAFS features. The second one is based on ab initio Quantum Molecular Dynamics (QMD) simulations from which a Kubo-Greenwood formulation combined with the Projector Augmented Wave (PAW) formalism gives a direct access to the X-ray absorption spectra. These spectra are compared with recent K-edge absorption measurements in aluminum targets isochorically heated by laser-created protons and probed by a short X-ray backlighting source.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Saturation mechanisms for edge turbulence

Saturation mechanisms for two-dimensional (2D) edge turbulence are studied in a Braginskii-type fluid model using the scrape-off-layer turbulence code. The simulations study the interaction of edge and scrape-off-layer (SOL) turbulence, blob generation, momentum transport, and shear flow generation in 2D turbulence. It is shown that a key parameter is the zonal flow shear damping rate, which controls both the level of saturated turbulence and the rate of blob generation. The flow shear profile is produced by a combination of the turbulent Reynold's stress inside the last closed surface and the sheath-induced flow in the SOL. The turbulent properties are studied as a function of zonal flow damping. The role of other edge and SOL dissipation mechanisms are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Zeeman polarimetry measurement for edge current density determination using Li-beam probe on JT-60U

Zeeman polarimetry system using Li-beam probe has been developed for the edge current density measurement in the JT-60U tokamak, which measures the polarization angle {alpha} (related to the pitch angle of the magnetic field) by means of photoelastic modulators, etalons, and phase sensitive detection using digital lock-in amplifiers with the accuracy in the {alpha} of {Delta}{alpha}{approx}0.1 deg. The diagnostic has 20-channel viewing chords covering the plasma peripheral region of normalized minor radius r/a{approx}0.8-1 with a spatial resolution of up to {approx}1 cm. Li-beam injection with beam current of up to {approx}5 mA has been achieved. A new tuning method of the wavelength for the etalon has been demonstrated, scanning the beam acceleration voltage and keeping a beam current constant during a single shot. The peak wavelength of the etalon is adjusted in the direction to both blue- and redshifts by changing the angle of incidence and increasing the temperature, respectively. Time evolution of the edge current density profile has been determined for the current ramp experiment in the Ohmically heated discharges. In addition, the edge current density profile with the local peak of j{sub ped}{approx}0.15-0.25 MA/m{sup 2} at r/a{approx}0.9 has been identified in the H-mode plasma, which is correlated with large pressure gradient in the pedestal region.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Edge-enhanced imaging obtained with very broad energy band x-rays

We demonstrate both theoretically and experimentally that edge-enhancement effects are produced when objects, in contact with the x-ray detector, are imaged by using very broad x-ray spectra. Radiographs of thin Al objects have been obtained with a table-top synchrotron source which generates x-rays in the energy range from a few kilo-electron-volts up to 6 MeV. Edge-enhancement effects arise from the combination of x-ray absorption (kilo-electron-volt part of the spectrum) and secondary particle emission (mega-electron-volt part of the spectrum) within the sample. The exact contribution of absorption and emission profiles in the edge-enhanced images has been calculated via Monte Carlo simulation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Infrared study of the absorption edge of {beta}-InN films grown on GaN/MgO structures

Infrared optical studies were carried out in a group of cubic InN samples grown by gas source molecular beam epitaxy on MgO (001) substrates. Room temperature (RT) reflectance and low-temperature (LT) transmittance measurements were performed by using fast Fourier transform infrared spectrometry. Reflectance fittings allowed to establish that {beta}-InN films have large free-carrier concentrations present (>10{sup 19} cm{sup -3}), a result that is corroborated by Hall effect measurements. Each sample explored exhibited a different optical absorption edge. The Varshni parameters that describe adequately the optical absorption edge responses with temperature are obtained for the set of samples studied. The observed temperatures changes, from LT to RT, are the lowest reported for III-V semiconductor binary compounds. The temperature coefficient of the conduction band depends on the strength of the electron-phonon interaction (e-ph-i), as well as on the thermal expansion. It has been predicted that cubic InN has one of the smallest e-ph-i of all III-V compounds, which is corroborated by these results. The variation in values of absorption edges is clearly consistent with the Burstein-Moss and band renormalization effects, produced by high free electron concentrations. It is shown that the conduction band in {beta}-InN, analogous to wurtzite InN, follows a nonparabolic behavior.

36 MATERIALS SCIENCE↗

Gyrokinetic simulation of turbulence driven geodesic acoustic modes in edge plasmas of HL-2A tokamak

Strong correlation between high frequency microturbulence and low frequency geodesic acoustic mode (GAM) has been observed in the edge plasmas of the HL-2A tokamak, suggesting possible GAM generation via three wave coupling with turbulence, which is in turn modulated by the GAM. In this work, we use the gyrokinetic toroidal code to study the linear and nonlinear development of the drift instabilities, as well as the generation of the GAM (and low frequency zonal flows) and its interaction with the turbulence for realistic parameters in the edge plasmas of the HL-2A tokamak for the first time. The simulation results indicate that the unstable drift wave drives strong turbulence in the edge plasma of HL-2A. In addition, the generation of the GAM and its interaction with the turbulence are all observed in the nonlinear simulation. The simulation results are in reasonable agreement with the experimental observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of statistical characterization of radial turbulence in the edge of HuanLiuqi-2A plasma with visible spectroscopy diagnostic

The radial motion and structure of edge turbulence in the HuanLiuqi-2A tokamak [Y. Liu et al., Nucl. Fusion 45, S239 (2005)] was measured with visible spectroscopy diagnostic system; the radial turbulence propagation velocity and correlation length were evaluated by time-delay correlation technique and there were typically V{sub r}=0.4-1 km/s and L{sub r}=2-6 cm, respectively. The edge intermittent events accompanied with turbulence have been observed in plasma edge and propagated outward radially; especially through the scrape-off layer, the fluctuation signals of D{sub {alpha}} exhibit strong asymmetric probability distribution functions (PDFs). Their propagation trajectories and radial velocity PDFs were inferred from a special correlation technique and the results indicated the radial velocity of intermittent event depends on its amplitude. Some comparisons with previous measurements and models were also presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗