Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTROMAGNETIC INSTRUMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Solar gamma rays powered by secluded dark matter

Secluded dark matter models, in which weakly interacting massive particles annihilate first into metastable mediators, can present novel indirect detection signatures in the form of gamma rays and fluxes of charged particles arriving from directions correlated with the centers of large astrophysical bodies within the Solar System, such as the Sun and larger planets. This naturally occurs if the mean free path of the mediator is in excess of the solar (or planetary) radius. We show that existing constraints from water Cerenkov detectors already provide a novel probe of the parameter space of these models, complementary to other sources, with significant scope for future improvement from high angular resolution gamma-ray telescopes such as Fermi-LAT. Fluxes of charged particles produced in mediator decays are also capable of contributing a significant solar system component to the spectrum of energetic electrons and positrons, a possibility which can be tested with the directional and timing information of PAMELA and Fermi.

79 ASTRONOMY AND ASTROPHYSICS↗

Secondary graviton spectra and waterfall-like fields

The secondary spectra of the gravitons induced by a waterfall-like field are computed and the general bounds on the spectral energy density of the tensor modes of the geometry are translated into explicit constraints on the amplitude and slope of the waterfall spectrum. The obtained results are compared with the primary gravitational wave spectra of the concordance model and of its neighboring extensions as well as with the direct LIGO/Virgo bounds on stochastic backgrounds of relic gravitons. Space-borne interferometers [such as LISA (Laser Interferometer Space Antenna), BBO (Big Bang Observer), and DECIGO (Deci-hertz Interferometer Gravitational Wave Observatory)] seem to be less relevant but their potential implications are briefly outlined.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Coherent diffraction of a single virus particle: The impact of a water layer on the available orientational information

Coherent diffractive imaging using x-ray free-electron lasers (XFELs) may provide a unique opportunity for high-resolution structural analysis of single particles sprayed from an aqueous solution into the laser beam. As a result, diffraction images are measured from randomly oriented objects covered by a water layer. We analyze theoretically how the thickness of the covering water layer influences the structural and orientational information contained in the recorded diffraction images. This study has implications for planned experiments on single-particle imaging with XFELs.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Evidence for a New Resonance and Search for the Y(4140) in the {gamma}{gamma}->{phi}J/{psi} Process

The process {gamma}{gamma}->{phi}J/{psi} is measured using a data sample of 825 fb{sup -1} collected with the Belle detector. A narrow peak of 8.8{sub -3.2}{sup +4.2} events, with a significance of 3.2 standard deviations including systematic uncertainty, is observed. The mass and natural width of the structure [named X(4350)] are measured to be [4350.6{sub -5.1}{sup +4.6}(stat)+-0.7(syst)] MeV/c{sup 2} and [13{sub -9}{sup +18}(stat)+-4(syst)] MeV, respectively. The product of its two-photon decay width and branching fraction to {phi}J/{psi} is [6.7{sub -2.4}{sup +3.2}(stat)+-1.1(syst)] eV for J{sup P}=0{sup +}, or [1.5{sub -0.6}{sup +0.7}(stat)+-0.3(syst)] eV for J{sup P}=2{sup +}. No signal for the Y(4140)->{phi}J/{psi} structure reported by the CDF Collaboration in B->K{sup +}{phi}J/{psi} decays is observed, and limits of {Gamma}{sub {gamma}}{sub {gamma}}(Y(4140))B(Y(4140)->{phi}J/{psi})<41 eV for J{sup P}=0{sup +} or <6.0 eV for J{sup P}=2{sup +} are determined at the 90% C.L. This disfavors the scenario in which the Y(4140) is a D{sub s}*{sup +}D{sub s}{sup *-} molecule.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

0.4- to 10-GHz airborne electromagnetic-environment survey of United States urban areas

An airborne electromagnetic-environment survey of some U.S. metropolitan areas measured terrestrial emissions within the broad-frequency spectrum from 0.4 to 10 GHz. A Cessna 402 commercial aircraft was fitted with both nadir-viewing and horizon-viewing antennas and instrumentation, including a spectrum analyzer, a 35-mm continuous-film camera, and a magnetic-tape recorder. Most of the flights were made at a nominal altitude of 10,000 ft, and Washington, Baltimore, Philadelphia, New York, and Chicago were surveyed. The 450- to 470-MHz land-mobile UHF band is especially crowded, and the 400- to 406-MHz space bands are less active. Test measurements obtained up to 10 GHz are discussed. Sample spectrum-analyzer photographs were selected from a total of 5750 frames representing 38 hours of data.

Taylor, R. E.↗

Spacecraft technology requirements for future NASA missions

Missions selected by NASA as representative of the most critical technology issues are described and the key technology requirements are discussed. The following are considered: (1) the Large Deployable Reflector (LDR), (2) the Sample Return Missions (SRM), (3) the Earth Observing System (EOS), and (4) the Geostationary Communications Platform (GCP). The LDR, designed for infrared and submillimeter astronomical measurements, will contain the following components for its instruments: indium antimonide charge-coupled arrays, extrinsic photodetector arrays, and heterodyne photoconductors. New technology developed for SRM includes an X-band transponder, a fiber-optic rotation sensor, and long-life batteries. The EOS will consist of instruments designed to measure the earth's atmosphere, interior, and surface, as well as an information system to support scientific research. Inherent in the platform of the GCP is the ability to effectively utilize both the geostationary arc and the electromagnetic spectrum; the GCP can also reduce overall satellite communications system costs.

Hudson, W. R.↗

Wave-optics modeling of the optical-transport line for passive optical stochastic cooling

Optical stochastic cooling (OSC) is expected to enable fast cooling of dense particle beams. Transition from microwave to optical frequencies enables an achievement of stochastic cooling rates which are orders of magnitude higher than ones achievable with the classical microwave based stochastic cooling systems. A subsystemcritical to the OSC scheme is the focusing optics used to image radiation from the upstream “pickup” undulator to the downstream “kicker” undulator. In this paper, we present simulation results using wave-optics calculation carried out with the Synchrotron Radiation Workshop (SRW). Our simulations are performed in support to a proof-of-principle experiment planned at the Integrable Optics Test Accelerator (IOTA) at Fermilab. The calculations provide an estimate of the energy kick received by a 100-MeV electron as it propagates in the kicker undulator and interacts with the electromagnetic pulse it radiated at an earlier time while traveling through the pickup undulator.

42 ENGINEERING↗

RF Reverb Chamber Radio Frequency Reverberation Chamber

Viewing an experiment in the radio frequency (RF) reverberation chamber, also known as a mode stirred chamber. The chamber is an isolated RF test chamber containing an irregularly shaped paddle capable of measuring a device’s radiated emissions, radiated immunity, shielding effectiveness, and antenna efficiency from 500MHz to 18GHz. The chamber is electromagnetically isolated from extremely low frequencies and is highly reverberant, which creates the fundamental wave chaotic properties required to make statistical measurements.

47 OTHER INSTRUMENTATION↗

Flow Sensor Test Article (F-STAr) - Assembly and Water Testing Report

The Flow Sensor Test Article (F-STAr) is a new test article under development for the Mechanisms Engineering Test Loop (METL) facility at Argonne National Laboratory. F-STAr’s purpose is to provide sodium submersible, high flowrate testing capabilities for the development of sensors, components, fluid studies and more. This report will provide a status update on the assembly and initial qualification testing of F-STAr. All components have been manufactured and received. Some modifications to these components were made to support minor changes in the test article design. Additionally, the power distribution, and data acquisition and control enclosures were designed, completed, and tested along with the control system software. Furthermore, initial qualification testing was completed in water. Finally, the F-STAr submersible Electromagnetic Flowmeter (EMFM) was completed and calibrated in flowing sodium.

42 ENGINEERING↗

Space telescope optical telescope assembly/scientific instruments. Phase B: Preliminary design and program definition study. Volume 2A. focal plane camera

Trade studies were conducted to ensure the overall feasibility of the focal plane camera in a radial module. The primary variable in the trade studies was the location of the pickoff mirror, on axis versus off-axis. Two alternatives were: (1) the standard (electromagnetic focus) SECO submodule, and (2) the MOD 15 permanent magnet focus SECO submodule. The technical areas of concern were the packaging affected parameters of thermal dissipation, focal plane obscuration, and image quality.

Source record↗

Electromagnetic Effects in SDF Explosions

The notion of high ion and electron concentrations in the detonation of aluminized explosive mixtures has aroused some interest in electro-magnetic effects that the SDF charges might generate when detonated. Motivated by this interest we have started to investigate whether significant electro-magnetic effects show up in our small-scale experiments. However, the design of instrumentation for this purpose is far from straightforward, since there are a number of open questions. Thus the main aim of the feasibility tests is to find - if possible - a simple and reliable method that can be used as a diagnostic tool for electro-magnetic effects. SDF charges with a 0.5-g PETN booster and a filling of 1 g aluminum flakes have been investigated in three barometric bomb calorimeters with volumes ranging from 6.3 l to of 6.6 l. Though similar in volume, the barometric bombs differed in the length-to-diameter ratio. The tests were carried out with the bombs filled with either air or nitrogen at ambient pressure. The comparison of the test in air to those in nitrogen shows that the combustion of TNT detonation products or aluminum generates a substantial increase of the quasi-steady overpressure in the bombs. Repeated tests in the same configuration resulted in some scatter of the experimental results. The most likely reason is that the aluminum combustion in most or all cases is incomplete and that the amount of aluminum actually burned varies from test to test. The mass fraction burned apparently decreases with increasing aspect ratio L/D. Thus an L/D-ratio of about 1 is optimal for the performance of shock-dispersed-fuel combustion. However, at an L/D-ratio of about 5 the combustion still yields appreciable overpressure in excess of the detonation. For a multi-burst scenario in a tunnel environment with a number of SDF charges distributed along a tunnel section a spacing of 5 tunnel diameter and a fuel-specific volume of around 7 l/g might provide an acceptable compromise between optimizing the combustion performance and keeping the number of elementary charges low. Further tests in a barometric bomb calorimeter of 21.2 l volume were performed with four types of aluminum. The mass fraction burned in this case appeared to depend on the morphology of the aluminum particles. Flake aluminum exhibited a better performance than granulated aluminum with particle sizes ranging from below 25 {micro}m to 125 {micro}m for the coarsest material. In addition, a feasibility study on electro-magnetic effects from SDF charges detonated in a tunnel has been performed. A method was developed to measure the local, unsteady electro-conductivity in the detonation/combustion products cloud. This method proved to yield reproducible results. A variety of methods were tested with regard to probing electro-magnetic pulses from the detonation of SDF charges. The results showed little reproducibility and were small compared to the effect from pulsed high voltage discharges of comparatively small energy (around 32 J). Thus either no significant electromagnetic pulse is generated in our small-scale tests or the tested techniques have to be discarded as too insensitive or too limited in bandwidth to detect possibly very high frequency electro-magnetic disturbances.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Integrated display of multi-sensor geophysical and electromagnetic flight data

Low-altitude wind shear has been identified by several aviation interests as a significant hazard to the safety of flying. The hazard may be greatest when the wind shear is due to an unpredicted and short-lived microburst occurring in the immediate flight path of an aircraft during takeoff or landing. Researchers from the NASA Langley Research Center have investigated wind shear by developing a suite of remote sensing instruments and then using these instruments in an airborne wind shear detection flight program. Among these instruments were a Doppler radar, a lidar, and an infrared sensor; these were supported by in situ measurements of aircraft and environmental parameters and by ground-based Doppler radars. The basic problem addressed was the airborne detection and measurement of meteorologically-induced wind shear sufficiently ahead of the aircraft to allow avoidance. If the remote measurements of the shear and its associated radar reflectivity did not exceed set limits, the airplane then continued through the wind shear so that in situ measurements could be made for comparison. Initial detection and vectoring to the wind shear was normally given from a ground-based Doppler weather radar and most of the wind shear events were due to microbursts, both wet and dry. This paper considers the problems of sampling the wind shear event, time and space registration among the various sensors, coordination of the various sensors' beams and sampling volumes, and also various techniques for portraying the data, both for research and for presentation. Examples are given based on data from the 1991 and 1992 NASA/FAA wind shear flights, and the results and conclusions are generalized to other flight experiments involving multi-sensor electromagnetic data sets.

Delnore, V. E.↗

SNEWS 2.0: a next-generation supernova early warning system for multi-messenger astronomy

The next core-collapse supernova in the Milky Way or its satellites will represent a once-in-a-generation opportunity to obtain detailed information about the explosion of a star and provide significant scientific insight for a variety of fields because of the extreme conditions found within. Supernovae in our galaxy are not only rare on a human timescale but also happen at unscheduled times, so it is crucial to be ready and use all available instruments to capture all possible information from the event. The first indication of a potential stellar explosion will be the arrival of a bright burst of neutrinos. Its observation by multiple detectors worldwide can provide an early warning for the subsequent electromagnetic fireworks, as well as signal to other detectors with significant backgrounds so they can store their recent data. The supernova early warning system (SNEWS) has been operating as a simple coincidence between neutrino experiments in automated mode since 2005. In the current era of multi-messenger astronomy there are new opportunities for SNEWS to optimize sensitivity to science from the next galactic supernova beyond the simple early alert. This document is the product of a workshop in June 2019 towards design of SNEWS 2.0, an upgraded SNEWS with enhanced capabilities exploiting the unique advantages of prompt neutrino detection to maximize the science gained from such a valuable event.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Radar Wind Profiler (RWP) and Radio Acoustic Sounding System (RASS) Instrument Handbook

The radar wind profiler (RWP) is an active remote-sensing instrument that can routinely, and virtually unattended, observe wind and turbulence in the troposphere through scattering from clear-air irregularities of the atmospheric refractive index (Gage and Balsley 1978). The principle of Doppler radars in general is based on sending electromagnetic pulses in the vertical and several tilted directions (vertical and oblique beams) and measuring the signal that is scattered back by atmospheric turbulence at all heights and received at the antenna. The RWPs provides measurements of backscattered signal strength and wind profiles nominally between 0.1 km and 6 km. The RWP operation assumes that the wind field is homogeneous over the spatial separation of the antenna beams, which is a safe assumption under stable atmospheric conditions. However, the wind may be different between the beams due to significant changes in the wind field, resulting in erroneous wind calculations. Therefore, the radial measurements are averaged over a sufficient time period to validate the assumption of homogeneity.

54 ENVIRONMENTAL SCIENCES↗

NASA F-106B lightning tests

Lightning simulation ground tests conducted on the NASA F-106B research aircraft to elicit natural strikes are summarized. The purpose of the test program was to measure the response of the aircraft's electromagnetic sensors and interior wire circuits to a controlled ground test environment that simulates the electromagnetic effects of a lightning strike. Both direct attachment and radiated field tests were conducted. In most cases, the aircraft's engine was running and test data were gathered simultaneously from NASA and MCAIR sensors on both the aircraft's own instrumentation system and the remote MCAIR computer-controlled data acquisition system. During the direct attachment tests, the input inductance, output condition (hard-wired or spark gap), and the output location were varied to provide a wide variety of test conditons. The radiated tests to the isolated aircraft were conducted to excite and measure the natural resonances of the F-106B aircraft.

Heady, B. D.↗

Design, Implementation, and Performance of the Astro-H Soft X-Ray Spectrometer Aperture Assembly and Blocking Filters

The calorimeter array of the JAXA Astro-H (renamed Hitomi) soft x-ray spectrometer (SXS) was designed to provide unprecedented spectral resolution of spatially extended cosmic x-ray sources and of all cosmic x-ray sources in the Fe-K band around 6 keV. The properties that made the SXS array a powerful x-ray spectrometer also made it sensitive to photons from the entire electromagnetic band as well as particles. If characterized as a bolometer, it would have had a noise equivalent power of <4 × 10(exp −18) W/((Hz)(exp 0.5)). Thus, it was imperative to shield the detector from thermal radiation from the instrument and optical and UV photons from the sky. In addition, it was necessary to shield the coldest stages of the instrument from the thermal radiation emanating from the warmer stages. These needs were addressed by a series of five thin-film radiation-blocking filters, anchored to the nested temperature stages, that blocked long-wavelength radiation while minimizing x-ray attenuation. The aperture assembly was a system of barriers, baffles, filter carriers, and filter mounts that supported the filters and inhibited their potential contamination. The three outer filters also had been equipped with thermometers and heaters for decontamination. We present the requirements, design, implementation, and performance of the SXS aperture assembly and blocking filters.

Kilbourne, Caroline A.↗

THE ELECTRON TEMPERATURE OF THE SOLAR TRANSITION REGION AS DERIVED FROM EIS AND SUMER

We use UV and extreme-UV emission lines observed in quiet regions on the solar disk with the Solar Ultraviolet Measurements of Emitted Radiation (SUMER) instrument and the Extreme Ultraviolet Imaging Spectrometer (EIS) to determine the electron temperature in solar transition region plasmas. Prominent emission lines of O IV and O VI are present in the solar spectrum, and the measured intensity line ratios provide electron temperatures in the range of log T = 5.6-6.1. We find that the theoretical O IV and O VI ion formation temperatures are considerably lower than our derived temperatures. The line ratios expected from a plasma in ionization equilibrium are larger by a factor of about 2-5 than the measured line ratios. A careful cross-calibration of SUMER and EIS has been carried out, which excludes errors in the relative calibration of the two instruments. We checked for other instrumental and observational effects, as well as line blending, and can exclude them as a possible source of the discrepancy between theoretical and observed line ratios. Using a multi-thermal quiet-Sun differential emission measure changes the theoretical line ratio by up to 28% which is not sufficient as an explanation. We also explored additional excitation mechanisms. Photoexcitation from photospheric blackbody radiation, self-absorption, and recombination into excited levels cannot be a possible solution. Adding a second Maxwellian to simulate the presence of non-thermal, high-energy electrons in the plasma distribution of velocities also did not solve the discrepancy.

74 ATOMIC AND MOLECULAR PHYSICS↗