Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTRODE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Scalable membrane-less microbial electrolysis cell with multiple compact electrode assemblies for high performance hydrogen production

Bioelectrochemical hydrogen production via microbial electrolysis cells (MECs) is a promising method for sustainable energy production and decarbonization of energy systems. However, the application of MECs is limited by the electrochemical performance, scalability, and the cost associated with expensive materials. Here, in this study, a scalable MEC (500 mL) with novel compact electrode assemblies and high electrode surface area to volume ratio (160 m 2 /m 3 ) was designed and constructed. The use of membranes, precious metal catalyst, and current collectors with high costs was avoided. A high current density at the steady state of 49.5 ± 5.3 A/m 2 was achieved using acetate as the substrate with phosphate buffer under the applied voltage of 1.01 V. The corresponding volumetric current density was 3948 ± 422 A/m 3 . The compact electrode assembly design limited methane production rate to 3.9 ± 0.2 L/L/D, while achieving a hydrogen production rate of 33.7 ± 1.7 L/L/D. With the suppression of microbial hydrogen consumption, the hydrogen production rate was 39.8 ± 1.9 L/L/D, higher by almost one order of magnitude than those of MECs with scaling up attempts. The compact electrode configuration reduced internal resistance to 88.5 ± 4.4 Ω cm 2 . The energy efficiency based on input electricity was 146 ± 7 % to 189 ± 9 % within the applied voltage range of 0.71 to 1.05 V. The results in this study demonstrated successful scaling up of high performance small MECs and offered a new possible approach of scaling up MECs by stacking high-performance subunits, with no trade-offs on electrochemical performance.

08 HYDROGEN↗

Carbon polyaniline capacitive deionization electrodes with stable cycle life

Electrode materials for capacitive deionization (CDI), an energy efficient method for desalination, were developed in this work. Waste-tire derived carbon (TC) coated with polyaniline was used to form a carbon polymer composite (CPC). CPC was used as an electrode in CDI configurations to determine the salt adsorption capability of the material. Chemical treatment of TC with KOH led to an enhancement in surface area to 952 m 2 /g and microporosity in the sub-2-nm range. This unique microstructure is considered to be beneficial for effective ion uptake in CDI applications. The capacitance of the electrodes was further enhanced through surface coating with polyaniline, resulting in a specific capacitance of 168.2 F/g. In batch cell testing with 1.2 V applied potential, the salt adsorption capacity (SAC), measured in mg of salt adsorbed per gram of active material, in a 1500–1700 ppm KCl solution was measured at 14.2 mg/g. Scale-up of the process with ionic-membrane-assisted CDI (MCDI) led to improvement in SAC at 18.9 mg/g. Further, cycling tests revealed that the electrodes had comparable or better longevity compared to other CDI materials, retaining >92.8% charging capacity after 300 cycles. In conclusion, high adsorption capacities for other salts such as LiCl, NaCl, MgCl 2 and CaCl 2 have been found.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insight on electrolyte infiltration of lithium ion battery electrodes by means of a new three-dimensional-resolved lattice Boltzmann model

Electrolyte filling takes place between sealing and formation in Lithium Ion Battery (LIB) manufacturing process. This step is crucial as it is directly linked to LIB quality and affects the subsequent time consuming electrolyte wetting process. Although having fast, homogeneous and complete wetting is of paramount importance, this process has not been sufficiently examined and fully understood. For instance, experimentally available data is insufficient to fully capture the complex interplay upon filling between electrolyte and air inside the porous electrode. We report here for the first time a 3D-resolved Lattice Boltzmann Method (LBM) model able to simulate electrolyte filling upon applied pressure of LIB porous electrodes obtained both from experiments (micro X-ray tomography) and computations (stochastic generation, simulation of the manufacturing process using Coarse Grained Molecular Dynamics and Discrete Element Method). The model allows obtaining advanced insights about the impact of the electrode mesostructures on the speed of electrolyte impregnation and wetting, highlighting the importance of porosity, pore size distribution and pores interconnectivity on the filling dynamics. Furthermore, we identify scenarios where volumes with trapped air (dead zones) appear and evaluate the impact of those on the electrochemical behavior of the electrodes.

25 ENERGY STORAGE↗

An ultrathin solid-state electrolyte film coated on LiNi 0.8 Co 0.1 Mn 0.1 O 2 electrode surface for enhanced performance of lithium-ion batteries

We report layered Ni-rich oxide is a promising cathode material for lithium-ion batteries (LIBs) of high energy density, yet its poor electrochemical stability induced by electrode-electrolyte interfacial degradation has still needed to be addressed. Surface coating is one of the powerful techniques to tackle this issue, nevertheless, it has been extensively used on particle but not electrode regarding a larger area of protection. Herein, we have covered a nano-scaled layer of lithium phosphorus oxynitride (LiPON) on the electrode level of LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM) surface and found lower impedance, longer cycle life, and better safety for treated battery. Most notably, such an NCM-LiPON based 1.3 Ah pouch cell delivers an energy density of 364.4 Wh kg -1 (based on positive and negative materials), along with the retention of 80.0% over 745 cycles at 0.5 C-rate, which is 1.3 times longer than the bare one. This results from modification of both superficial cathode-electrolyte interphase (CEI) and structure stabilization of general particle surface, therefore, role of conformal coating upon electrode surface should be highlighted.

36 MATERIALS SCIENCE↗

Design and processing for high performance Li ion battery electrodes with double-layer structure

A two-layer LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) cathode has been designed and fabricated containing a “power layer” and “energy layer”, with corresponding porosity and particle size prescribed to each layer to achieve best utilization of electrode material (maximum integrated depth of discharge across the electrode thickness) at high applied current. The cathode showed a 17% improvement in capacity when tested in symmetric cells. When applying the design to a full cell, where both positive and negative electrodes contain power and energy layers, a 74% increase in discharge capacity at 2C was achieved compared to the cell with conventional electrodes. Furthermore, this demonstrates an avenue to increase energy and power density of lithium–ion batteries and enable fast charging capability.

25 ENERGY STORAGE↗

In situ AFM studies on lithium (de)intercalation-induced morphology changes in a LixCoO2 micro-machined thin film electrode

Structural instability due to intercalation-induced stresses in electrode materials is one of the key degradation mechanisms of Li-ion batteries. Fragmentation of material degrades structural integrity and electrical resistance, and also accelerates harmful side reactions. In situ experiments are the appropriate approach to investigate the actual time dependent nature of behavior changes of an electrode material while it is charged and discharged. In the current work, a unique in situ electrochemical atomic force microscopy (ECAFM) measurement is made on samples of cylindrical shape, which are micro-machined by focused ion beam (FIB) microscopy. This pre-defined geometry allows the exclusion of secondary, non-active materials from the electrochemically active material as well as the removal of any vagueness coming from the irregular geometry of particles. Also, the experimental results are used to validate a proposed coupled electrochemical and mechanical model for determination of the stress-strain state of active electrode material during electrochemical cycling. The results produced using the model correlate the experimental data rather well. The combined results reveal the key effects of the geometry, kinetics, and mechanics of electrode materials on the stress-strain state, which is a barometer of structural stability of a material.

Park, Jonghuyn↗

Analysis of geometric and electrochemical characteristics of lithium cobalt oxide electrode with different packing densities

In order to investigate geometric and electrochemical characteristics of Li ion battery electrode with different packing densities, lithium cobalt oxide (LiCoO 2 ) cathode electrodes were fabricated from a 94:3:3 (wt%) mixture of LiCoO 2 , polymeric binder, and super-P carbon black and calendered to different densities. A synchrotron X-ray nano-computed tomography system with a spatial resolution of 58.2 nm at the Advanced Photon Source of the Argonne National Laboratory was employed to obtain three dimensional morphology data of the electrodes. The morphology data were then quantitatively analyzed to characterize their geometric properties, such as porosity, tortuosity, specific surface area, and pore size distribution. The geometric and electrochemical analysis reveal that high packing density electrodes have smaller average pore size and narrower pore size distribution, which improves the electrical contact between carbon-binder matrix and LiCoO 2 particles. The better contact improves the capacity and rate capability by reducing the possibility of electrically isolated LiCoO 2 particles and increasing the electrochemically active area. The results show that increase of packing density results in higher tortuosity, but electrochemically active area is more crucial to cell performance than tortuosity at up to 3.6 g/cm 3 packing density and 4 C rate.

25 ENERGY STORAGE↗

The electrochemical behavior of poly 1-pyrenemethyl methacrylate binder and its effect on the interfacial chemistry of a silicon electrode

The physico-chemical properties of poly (1-pyrenemethyl methacrylate) (PPy) are presented with respect to its use as a binder in a Si composite anode for Li-ion batteries. PPy thin-films on Si(100) wafer and Cu model electrodes are shown to exhibit superior adhesion as compared to conventional polyvinylidene difluoride (PVdF) binder. Electrochemical testing of the model bi-layer PPy/Si(100) electrodes in a standard organic carbonate electrolyte reveal higher electrolyte reduction current and an overall irreversible cathodic charge consumption during initial cycling versus the uncoated Si electrode. The PPy thin-film is also shown to impede lithiation of the underlying Si. XAS, AFM, TGA and ATR-FTIR analysis indicated that PPy binder is both chemically and electrochemically stable in the cycling potential range however significant swelling is observed due to a selective uptake of diethyl carbonate (DEC) from the electrolyte. The increased concentration of DEC and depletion of ethylene carbonate (EC) at the Si/PPy interface leads to continuous decomposition of the electrolyte and results in non-passivating behavior of the Si(100)/PPy electrode as compared to pristine silicon. Consequently, PPy binder improves the mechanical integrity of composite Si anodes but it influences mass transport at the Si(100)/PPy interface and alters electrochemical response of silicon during cycling in an adverse manner.

25 ENERGY STORAGE↗

Quantifying gas generation from slurries used in fabrication of Si-containing electrodes for lithium-ion cells

The high capacity of silicon motivates its use as anode material for Li-ion batteries. While such Si-based electrodes are typically processed from aqueous slurries, elemental silicon is highly susceptible to hydrolysis, yielding flammable hydrogen gas as a byproduct. This gassing can present numerous safety and quality concerns for scaling up of the production. In this study we describe a method to quantify the volume of gases generated using the Archimedes principle. We show that the gas volumes are affected by various factors, which include the characteristics of the electrode slurry and attributes (particle size, surface coatings) of the silicon powders. A catalytic effect on gas evolution is observed when a lithiated polycarboxylate binder is present in the solution. On the other hand, negligible gas generation is observed in electrode slurries containing the N -methyl-2-pyrrolidone (NMP) solvent, which could be considered as an alternative to the water-based processes presently under consideration. Lastly, our study can be used as a guide for the development of slurry mixtures that can mitigate the safety concerns associated with the silicon-electrode fabrication process.

25 ENERGY STORAGE↗

Direct reuse of graphite and lithium nickel manganese cobalt oxide (NMC) recovered from ultrafast-laser ablation debris in Li-ion battery electrodes

Here we demonstrate that debris collected from the ultrafast-laser ablation of graphite anodes can be directly reused in a lithium-ion battery with little to no negative effects on electrochemical performance. Further, we show that while post-ablation NMC (LiNi 0.33 Mn 0.33 Co 0.33 O) cathode debris will require additional processing before being incorporated into an electrode, its critical materials (nickel, manganese, and cobalt) are not lost during ablation and can be recovered for recycling. Pre- and post-ablation materials are characterized with a suite of diagnostics, including SEM, TEM, X-ray CT, EDS, and XRD, to study changes in material morphology, composition and crystal structure. Graphite exhibited little to no morphological or compositional changes and a slight annealing of its crystal structure. NMC underwent profound morphological and crystallographic changes, but retained its elemental composition. Finally, post-ablation materials were re-manufactured into electrodes and cycled vs lithium metal. Graphite showed equal or better capacity and Coulombic efficiency compared to pre-ablation electrodes, while the post-ablation NMC exhibited severely reduced electrochemical performance. Furthermore, we discuss the outlook for application of this work to advanced manufacturing lines that produce next-generation, laser-patterned electrodes.

25 ENERGY STORAGE↗

Surface modification of cathode material enhances electrochemical performance in dry-processed Li-ion battery electrodes

The transition to electric vehicles (EVs) is pivotal for achieving energy security and integrating grid stability, with lithium-ion batteries (LIBs) playing a central role in this transformation. However, the conventional wet electrode manufacturing relying on N-methyl-2-pyrrolidone (NMP) solvent is energy intensive and costly. Dry processing (DP) has emerged as a promising alternative, eliminating solvents and using polytetrafluoroethylene (PTFE) binder for electrode fabrications. Despite its advantages, DP faces a critical challenge: poor interfacial adhesion between the hydrophobic PTFE binder and the hydrophilic cathode active material (CAM), particularly LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811), which undermines electrode performance. Here, to address this, we introduced a novel vapor-phase trimethoxymethylsilane (TMMS) coating to hydrophobize the CAM surface, enhancing compatibility with PTFE. This surface modification significantly enhances binder – CAM interactions, enabling uniform mixing and robust electrode integrity without damaging the CAM particles. Our findings advance the feasibility of environmentally sustainable and cost-effective dry processing, representing a significant step toward sustainable battery manufacturing.

Choi, Junbin [Oak Ridge National Laboratory (ORNL)↗

Combustion synthesis of MgFe{sub 2}O{sub 4}/graphene nanocomposite as a high-performance negative electrode for lithium ion batteries

We present a facile and cost-effective urea-assisted auto-combustion method for synthesizing pure MgFe{sub 2}O{sub 4} nanoparticle and MgFe{sub 2}O{sub 4}/graphene nanocomposite samples followed by annealing at 600 °C for 5 h under N{sub 2} atmosphere. The X-ray diffraction pattern confirmed the single phase formation for both samples. The obtained morphology of the nanocomposite sample shows that the MgFe{sub 2}O{sub 4} nanoparticles are highly dispersed on conductive graphene nanosheets with particle size in the range of 50–100 nm. When applied as an anode material, MgFe{sub 2}O{sub 4}/graphene nanocomposite electrode shows a high reversible charge capacity of 764.4 mAh g{sup −1} at 0.04 C over 60 charge/discharge cycles and in spite of that it also retained a capacity of 219.9 mAh g{sup −1} at high current rate of 4.2 C. The obtained result is much better than the synthesized pure MgFe{sub 2}O{sub 4} nanoparticle electrode. The excellent electrochemical performance of the MgFe{sub 2}O{sub 4}/graphene nanocomposite electrode can be attributed to the strong favorable synergistic interaction between MgFe{sub 2}O{sub 4} and reduced graphene nanosheets, which supplied a large number of accessible active sites for Li{sup +}-ion insertion and short diffusion length for both Li{sup +} ions and electrons. In addition, the graphene nanosheets in the nanocomposite electrode provide high conductivity and accommodate the large volume expansion/contraction during cycling, resulting in high capacity and long cycling stability. - Highlights: • MgFe{sub 2}O{sub 4}/graphene nanocomposite was synthesized by facile urea-assisted method. • Such well-designed structure results in fine and strong interfacial interaction. • Nanocomposite anode shows high rate capability and long cycling stability. • Better performance is due to synergistic effect between MgFe{sub 2}O{sub 4} and graphene. • Simple, low cost and fast synthesis is attractive for large scale applications.

36 MATERIALS SCIENCE↗

Nickel/silicon core/shell nanosheet arrays as electrode materials for lithium ion batteries

Highlights: • Ni nanosheet arrays is the core and Si layer is the shell. • Ni nanosheet arrays act as a three-dimensional current collector to support Si. • Ni nanosheet arrays can improve the conductivity and stability of the electrode. • Ni/Si nanosheet arrays exhibit excellent cyclic and rate performance. - Abstract: Ni/Si core/shell nanosheet arrays are proposed to enhance the electrochemical lithium-storage properties of silicon. The arrays are characterized by means of X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The arrays are micro-sized in height, which are constructed by interconnected Ni nanosheet as the core and Si coating layer as the shell. The electrochemical properties as anode materials of lithium ion batteries are investigated by cyclic voltammetry (CV) and galvanostatic charge-discharge tests. The arrays can achieve high reversible capacity, good cycle stability and high rate capability. It is believed that the enhanced electrochemical performance is attributed to the electrode structure, because the interconnected Ni nanosheet can act as a three-dimensional current collector, and it has the ability of improving the electrode conductivity, enlarging the electrochemical reaction interface, and suppressing the electrode pulverization.

36 MATERIALS SCIENCE↗

A stable graphite electrode in superconcentrated LiTFSI-DME/DOL electrolyte and its application in lithium-sulfur full battery

Graphical abstract: In superconcentrated ether-based solutions, the formed SEI film inhibits electrolyte decomposition and graphite exfoliation caused by co-intercalation of solvents. Thus, reversible lithium intercalation and de-intercalation at a graphite electrode has been realized. - Highlights: • Prelithiated graphite anodes are coupled with sulfur composite cathodes to form a Li–S full cell in superconcentrated LiTFSI-DME/DO electrolyte. • The introduced superconcentrated ether-based electrolyte permits reversible lithium intercalation and de-intercalation at a graphite electrode. • The assembled Li–S full battery exhibits better cycle performance and coulombic efficiencies. - Abstract: Herein, prelithiated graphite anodes are coupled with sulfur composite cathodes to form a Li–S full cell in superconcentrated ether electrolyte. This novel system is effective in avoiding sever corrosion of Li-metal anode and significantly improving the safety of present Li–S cell, owing to the replacement of Li-metal anode with graphite. The introduced superconcentrated ether electrolyte has a unique networking structure of Li cations and TFSI anions with Li{sup +}-solvating DME/DOL solvents, which is conducive to form a stable TFSI-derived surface film on the graphite electrode. The stable and dense TFSI-derived film inhibits further electrolyte decomposition and graphite exfoliation caused by co-intercalation of solvents, allowing reversible lithium intercalation and de-intercalation at a graphite electrode. Besides, the severe polysulfides shuttle is also suppressed by the concentrated ether-based solutions. Consequently, the assembled graphite-sulfur full battery retains outstanding capacity of 686 mAh g{sup −1}{sub sulfur} at 0.1C rate after 105 cycles, along with high Coulombic efficiency.

36 MATERIALS SCIENCE↗

Highly transparent metal electrodes via direct printing processes

Highlights: • Pt(NO{sub 3}){sub 2}(ACN){sub 2} as a new molecular platinum complex has been introduced. • The complex shows excellent printability in nanoimprint lithography. • Pt line and grid pattern with linewidths as small as 40 nm could be printed. • The printed electrodes show resistance below 100 Ω and transmittance up to 90%. - Abstract: Transparent platinum electrodes are prepared using nanoimprint lithography of a newly developed molecular platinum complex. Thermal decomposition at moderate temperature of this complex gives rise to elemental platinum line and grid pattern with linewidths down to 40 nm. These electrodes exhibit transmittances of 90% and resistances below 100 Ω. Thus, for the first time, highly transparent electrodes are prepared by a direct soft lithographical printing process.

36 MATERIALS SCIENCE↗

Triphase electrode performance adjustment for rechargeable ion batteries

Rechargeable batteries electrodes are mainly classical oxides with single structure, but their performance is insufficient to meet the growing energy storage needs of modern-society. Recently, composite-structure materials with great improvements in electrochemical performance have been developed. However, little research has been conducted on these materials with regard to adjusting their structures and further controlling their electrochemical performance. Herein, composite-structure Na 2/3 Ni 1/3–x Fe x Ti 2/3 O 2 (0 ≤ x ≤ 1/3) electrodes for sodium-ion batteries were designed on the basis of results from in-situ high-temperature X-ray diffraction. Triphase compositions of P2-Na 2/3 Ni 1/3 Ti 2/3 O 2 , tunnel-Na 2.65 Ti 3.35 Fe 0.65 O 9 , and tunnel-NaFeTiO 4 were prepared, and Na + insertion/extraction in different structures was observed using in-situ electrochemical X-ray diffraction. An optimum electrode with 46% P2-structure presented the best comprehensive performance: 105 mAh g –1 initial reversible capacity along with 86.5% capacity-retention after 1500 cycles. As a result, this work opens a new field for designing and adjusting composite electrodes for better electrochemical performance, not limited for sodium-ion batteries but also for other advanced battery-systems.

25 ENERGY STORAGE↗

Molybdenum polysulfide chalcogels as high-capacity, anion-redox-driven electrode materials for Li-ion batteries

Sulfur cathodes in conversion reaction batteries offer high gravimetric capacity but suffer from parasitic polysulfide shuttling. We demonstrate here that transition metal chalcogels of approximate formula MoS 3.4 achieve a high gravimetric capacity close to 600 mAh g –1 (close to 1000 mAh g –1 on a sulfur basis) as electrode materials for lithium-ion batteries. Transition metal chalcogels are amorphous and comprise polysulfide chains connected by inorganic linkers. The linkers appear to act as a “glue” in the electrode to prevent polysulfide shuttling. The Mo chalcogels function as electrodes in carbonate- and ether-based electrolytes, which further provides evidence of polysulfide solubility not being a limiting issue. We employ X-ray spectroscopy and operando pair distribution function techniques to elucidate the structural evolution of the electrode. Raman and X-ray photoelectron spectroscopy track the chemical moieties that arise during the anion-redox-driven processes. As a result, we find the redox state of Mo remains unchanged across the electrochemical cycling and, correspondingly, the redox is anion-driven.

25 ENERGY STORAGE↗

Development and Characterization of Electrodes for Surface-Specific Attenuated Total Reflection Two-Dimensional Infrared Spectroelectrochemistry

Electrochemical interfaces still have remaining mysteries surrounding the interfacial region of the electrical double layer, despite being prevalent throughout the energy and water remediation industries. The electrical double layer is where many important dynamic processes such as catalysis and electron transfer occur. The goal of this work is to study the electrical double layer with two-dimensional infrared (2D IR) spectroscopy to experimentally access the details of the structural dynamics of this complex environment. However, there are several experimental challenges to applying 2D IR spectroscopy to this application, such as assuring the surface specificity of the spectrum, optimizing the signal strength while minimizing spectral distortions from dispersion and Fano line shapes, and selecting electrode materials that are both sufficiently IR compatible and conductive. Here we will discuss various considerations when designing 2D IR experiments of electrode interfaces utilizing several substrates and experimental configurations and demonstrate a robust method for 2D IR experiments of electrode interfaces under applied potential that combines nonconducting Si ATR wafers with conductive ITO and thin nanostructured films of plasmonically active Au functionalized with 3-mercapto-2-butanone (MCB). We show that layered electrodes on thin Si ATR wafers with MCB are sensitive to applied potential and that the distortions in the linear and 2D IR spectra are heavily dependent on the morphology of the Au surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗