Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Defect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Kinetics study of the evolution of oxygen-related defects in mono-crystalline silicon subjected to electron-irradiation and thermal treatment

The diffusion and dissociation mechanisms governing the evolution of oxygen and vacancy-oxygen defects in Czochralski-grown Si samples have been studied. The samples were irradiated at (i) room temperature or (ii) elevated temperature (350 °C) by MeV electrons and then isothermally annealed at 8 different temperatures in the range of 300 °C to 500 °C. The evolution of the concentrations of oxygen complexes (O{sub n}, n ≤ 3) and mono-vacancy-oxygen defects (VO{sub n}, n ≤ 4) have been followed by infrared absorption measurements of local vibrational modes originating from the individual defects. The experimental kinetics data have been compared with simulation results based on the theory for diffusion limited reactions, assuming a model where sequential build-up of the VO{sub n} defects is a key ingredient. A close quantitative agreement is obtained for both sets of samples despite quite different initial conditions prior to the annealing, which adds evidence to the validity of the model. Values for the diffusivity and dissociation rates of VO{sub n} (n ≤ 4) and O{sub n} (n ≤ 3) have been deduced and in general, the mobility and stability of VO{sub n} decrease and increase with n, respectively. For all the defects, partial dissociation appears as a prevailing process during diffusion, while full dissociation of VO{sub n} is limited by an energy barrier identical to that of interstitial oxygen (O{sub i}) diffusion (∼2.55 eV). The oxygen dimer and trimer are fast diffusers but slower than substitutional oxygen, i.e., VO; VO is found to be the most mobile species, whilst O{sub i} is the slowest one with a difference in diffusivity of up to 7 orders of magnitude in the studied temperature range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Relevance of non-equilibrium defect generation processes to resistive switching in TiO{sub 2}

First principles calculations are employed to identify atomistic pathways for the generation of vacancy-interstitial pair defects in TiO{sub 2}. We find that the formation of both oxygen and titanium defects induces a net dipole moment indicating that their formation can be assisted by an electric field. We also show that the activation barrier to formation of an oxygen vacancy defect can be reduced by trapping of holes which may be injected by the electrode. The calculated activation energies suggest that generation of titanium defects is more favorable than generation oxygen defects although activation energies in both cases are relatively high (>3.3 eV). These results provide much needed insight into an issue that has been widely debated but for which little definitive experimental information is available.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Point defect states in Sb-doped germanium

Defect states in n-type Sb-doped germanium were investigated by deep-level transient spectroscopy. Cobalt-60 gamma rays were used to generate isolated vacancies and interstitials which diffuse and react with impurities in the material to form four defect states (E{sub 37}, E{sub 30}, E{sub 22}, and E{sub 21}) in the upper half of the bandgap. Irradiations at 77 K and 300 K as well as isothermal anneals were performed to characterize the relationships between the four observable defects. E{sub 37} is assigned to the Sb donor-vacancy associate (E-center) and is the only vacancy containing defect giving an estimate of 2 × 10{sup 11 }cm{sup −3} Mrad{sup −1} for the uncorrelated vacancy-interstitial pair introduction rate. The remaining three defect states are interstitial associates and transform among one another. Conversion ratios between E{sub 22}, E{sub 21}, and E{sub 30} indicate that E{sub 22} likely contains two interstitials.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Accelerated carrier recombination by grain boundary/edge defects in MBE grown transition metal dichalcogenides

Defect-carrier interaction in transition metal dichalcogenides (TMDs) plays important roles in carrier relaxation dynamics and carrier transport, which determines the performance of electronic devices. With femtosecond laser time-resolved spectroscopy, we investigated the effect of grain boundary/edge defects on the ultrafast dynamics of photoexcited carrier in molecular beam epitaxy (MBE)-grown MoTe 2 and MoSe 2 . We found that, comparing with exfoliated samples, the carrier recombination rate in MBE-grown samples accelerates by about 50 times. We attribute this striking difference to the existence of abundant grain boundary/edge defects in MBE-grown samples, which can serve as effective recombination centers for the photoexcited carriers. We also observed coherent acoustic phonons in both exfoliated and MBE-grown MoTe 2 , indicating strong electron-phonon coupling in this materials. Our measured sound velocity agrees well with the previously reported result of theoretical calculation. Our findings provide a useful reference for the fundamental parameters: carrier lifetime and sound velocity and reveal the undiscovered carrier recombination effect of grain boundary/edge defects, both of which will facilitate the defect engineering in TMD materials for high speed opto-electronics.

36 MATERIALS SCIENCE↗

Phonon interaction with ripples and defects in thin layered molybdenum disulfide

Compared to other extrinsic phonon scattering mechanisms such as surface and interior defects, phonon scattering and lattice thermal resistance due to structural rippling in few-layer two-dimensional (2D) materials are under-examined. Here, the temperature-dependent basal-plane thermal conductivities (κ) of one rippled and four flat molybdenum disulfide (MoS 2 ) samples are measured using a four-probe thermal transport measurement method. A flat 18 nm thick sample and a rippled 20 nm thick sample show similar peak κ values of 122 ± 17 and 129 ± 19 W m –1 K –1 , respectively. In comparison, a 32 nm thick flat sample has a peak κ value of only 58 ± 11 W m –1 K –1 despite having an increased thickness. The peak thermal conductivities of the five samples decrease with increasing integrated Raman intensity caused by defects in the frequency range of the phonon bandgap in MoS 2 . In conjunction with the experimental findings, theoretical calculations of the temperature-, thickness-, strain-, and defect-dependent κ of thin MoS 2 layers reveal the importance of interior defect scattering over scattering from compression-induced ripples and surface defects in these samples. Furthermore, the results further clarify the conditions where ripples are important in determining the basal plane thermal resistance in layered systems.

36 MATERIALS SCIENCE↗

Catalytic C 2 H 2 synthesis via low temperature CO hydrogenation on defect-rich 2D-MoS 2 and 2D-MoS 2 decorated with Mo clusters

Rational design of novel catalytic materials used to synthesize storable fuels via the CO hydrogenation reaction has recently received considerable attention. In this work, defect poor and defect rich 2D-MoS 2 as well as 2D-MoS 2 decorated with Mo clusters are employed as catalysts for the generation of acetylene (C 2 H 2 ) via the CO hydrogenation reaction. Temperature programmed desorption is used to study the interaction of CO and H2 molecules with the MoS 2 surface as well as the formation of reaction products. The experiments indicate the presence of four CO adsorption sites below room temperature and a competitive adsorption between the CO and H 2 molecules. The investigations show that CO hydrogenation is not possible on defect poor MoS 2 at low temperatures. However, on defect rich 2D-MoS 2 , small amounts of C 2 H 2 are produced, which desorb from the surface at temperatures between 170 K and 250 K. A similar C 2 H 2 signal is detected from defect poor 2D-MoS 2 decorated with Mo clusters, which indicates that low coordinated Mo atoms on 2D-MoS 2 are responsible for the formation of C 2 H 2 . Density functional theory investigations are performed to explore possible adsorption sites of CO and understand the formation mechanism of C 2 H 2 on MoS 2 and Mo 7 /MoS 2 . The theoretical investigation indicates a strong binding of C 2 H 2 on the Mo sites of MoS 2 preventing the direct desorption of C 2 H 2 at low temperatures as observed experimentally. Instead, the theoretical results suggest that the experimental data are consistent with a mechanism in which CHO radical dimers lead to the formation of C 2 H 2 that presents an exothermic desorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Machine learning substitutional defect formation energies in ABO 3 perovskites

Perovskite oxides are a promising material platform for use in a wide range of technological applications including electronics, sensors, fuel cells, and catalysis. This is owing to the extraordinary tunability of their physical and chemical properties via defect engineering. The feasibility and the stability of a defect, such as a substitutional dopant, in the host lattice is usually obtained via experiments and/or through detailed quantum mechanical calculations. Both of these conventional routes are expensive and time consuming. An alternative is a data-driven machine learning (ML)-based approach. In this work, we have applied ML techniques to identify the factors that influence defect formation energy, which is an important measure of the stability of the defects, in perovskite oxides. Using 13 elemental properties as features and random forest regression, we demonstrate a systematic approach to down-selecting from the larger set of features to those that are important, establishing a framework for accurate predictions of the defect formation energy. We quantitatively show that the most important factors that control the dopant stability are the dopant ionic size, heat of formation, effective tolerance factor, and oxidation state. Our work reveals previously unknown correlations, chemical trends, and the interplay between stability and underlying chemistries. Hence, these results showcase the efficacy of ML tools in identifying and quantifying different feature-dependencies and provide a promising route toward dopant selection in the perovskites. Herein, we have developed a framework that itself is general and can be potentially applied to other material classes.

36 MATERIALS SCIENCE↗

Defect suppression in wet-treated etched-and-regrown nonpolar m-plane GaN vertical Schottky diodes: A deep-level optical spectroscopy analysis

In this work, steady-state photocapacitance (SSPC) was conducted on nonpolar m-plane GaN n-type Schottky diodes to evaluate the defects induced by inductively coupled plasma (ICP) dry etching in etched-and-regrown unipolar structures. An ~10× increase in the near-midgap Ec – 1.9 eV level compared to an as-grown material was observed. Defect levels associated with regrowth without an etch were also investigated. The defects in the regrown structure (without an etch) are highly spatially localized to the regrowth interface. Subsequently, by depth profiling an etched-and-regrown sample, we show that the intensities of the defect-related SSPC features associated with dry etching depend strongly on the depth away from the regrowth interface, which is also reported previously. A photoelectrochemical etching (PEC) method and a wet AZ400K treatment are also introduced to reduce the etch-induced deep levels. A significant reduction in the density of deep levels is observed in the sample that was treated with PEC etching after dry etching and prior to regrowth. An ~2× reduction in the density of Ec – 1.9 eV level compared to a reference etched-and-regrown structure was observed upon the application of PEC etching treatment prior to the regrowth. The PEC etching method is promising for reducing defects in selective-area doping for vertical power switching structures with complex geometries.

36 MATERIALS SCIENCE↗

In situ measurements of non-equilibrium positron state defects during He irradiation in Si

Radiation-induced property changes in materials originate from the energy transfer from an incoming particle to the existing lattice, displacing atoms. The displaced atoms can cause the formation of extended defects including dislocation loops, voids, or precipitates. The non-equilibrium defects created during damage events determine the extent of these larger defects and are a function of dose rate, material, and temperature. However, these defects are transient and can only be probed indirectly. Herein, we present direct experimental measurements and evidence of irradiated non-equilibrium vacancy formation, where in situ positron annihilation spectroscopy was used to prove the generation of non-equilibrium defects in silicon.

36 MATERIALS SCIENCE↗

Defects of perovskite semiconductor CsPbBr3 investigated via photoluminescence and thermally stimulated current spectroscopies

Halide perovskites are essential materials for hard radiation detectors at ambient temperature. To improve detector performance, charge transport must be investigated and optimized. Using photoluminescence (PL) and thermally stimulated current (TSC) spectroscopies, we investigate photogenerated charge carriers in Bridgman-grown CsPbBr3 single crystals to understand the nature of charge transport. PL spectroscopy of these halide perovskites revealed the presence of strong emission bands at the band edge, which were attributed to free or bound excitons. It is shown that a wide broadening of the excitonic linewidth in these halide perovskites arises from strong exciton–phonon coupling, which is substantially dominated by longitudinal optical phonons via Fröhlich interaction. An additional contribution due to the presence of ionized impurities was also observed. Crystals with a detectable sensitivity to high-energy gamma radiation are characterized by a higher intensity and a narrower linewidth of the principal PL peak at 2.326 eV. Defect states beyond 2.214 eV have a negative impact on detector sensitivity to high-energy gamma radiation. TSC spectroscopy reveals an array of trap levels spanning 0.15–0.70 eV, attributed to intrinsic point defects and multiple extrinsic defects involving dopants or impurities. Defects identified included Cs and Br vacancies, as well as Pb interstitials with concentrations in the 1011–1016 cm−3 range. Understanding how the synthesis process impacts the types and concentrations of the defects present is currently under investigation. Elimination or suppression of the defect/trap states should result in halide perovskite materials with longer carrier diffusion lengths and improved detector characteristics.

Physics↗

Native point defects in HgCdTe infrared detector material: Identifying deep centers from first principles

We investigate the native point defects in the long-wavelength infrared (LWIR) detector material Hg0.75Cd0.25Te using a dielectric-dependent hybrid density functional combined with spin–orbit coupling. Characterizing these point defects is essential as they are responsible for intrinsic doping and nonradiative recombination centers in the detector material. The dielectric-dependent hybrid functional allows for an accurate description of the bandgap (Eg) for Hg1−xCdxTe (MCT) over the entire compositional range, a level of accuracy challenging with standard hybrid functionals. Our comprehensive examination of the native point defects confirms that cation vacancies VHg(Cd) are the primary sources of p-type conductivity in the LWIR material given their low defect formation energies and the presence of a shallow acceptor level (−/0) near the valence-band maximum. In addition to the shallow acceptor level, the cation vacancies exhibit a deep charge transition level (2−/−) situated near the midgap, characteristic of nonradiative recombination centers. Our results indicate that Hg interstitial could also be a deep center in the LWIR MCT through a metastable configuration under the Hg-rich growth conditions. While an isolated Te antisite does not show deep levels, the formation of VHg–TeHg defect complex introduces a deep acceptor level within the bandgap.

Physics↗

Mapping Strain-rate Dependent Dislocation-Defect Interactions by Atomistic Simulations

Probing the mechanisms of defect-defect interactions at strain rates lower than 106 s-1 is an unresolved challenge to date to molecular dynamics (MD) techniques. Here we propose a novel atomistic approach based on transition state theory and the concept of a strain-dependent effective activation barrier that is capable of simulating the kinetics of dislocation-defect interactions at virtually any strain rate, exemplified within 10-7 to 107 s-1. We apply this approach to the problem of an edge dislocation colliding with a cluster of self-interstitial atoms (SIA) under shear deformation. Using an activation-relaxation algorithm (1), we uncover a unique strain-rate dependent trigger mechanism that allows the SIA cluster to be absorbed during the process leading to dislocation climb. Guided by this finding, we determine the activation barrier of the trigger mechanism as a function of shear strain, and use that in a coarse-graining rate equation formulation for constructing a mechanism map in the phase space of strain-rate and temperature. Our predictions of a crossover from a defect recovery at the low strain rate regime to defect absorption behavior in the high strain-rate regime are validated against our own independent, direct MD simulations at 105 to 107 s-1. Implications of the present approach for probing molecular-level mechanisms in strain-rate regimes previously considered inaccessible to atomistic simulations are discussed.

activation mecanism↗

Near-surface modification of defective KTaO 3 by ionizing ion irradiation

The synergistic effect of nuclear (S n ) and electronic (S e ) energy loss observed in some ABO 3 perovskites has attracted considerable attention due to the real possibility to modify various near-surface properties, such as the electronic and optical properties, by patterning ion tracks in the defective near-surface regions. In this study, we show that low-energy ion-induced disordering in conjunction with ionizing ion irradiation (18 MeV Si, 21 MeV Ni and 91.6 MeV Xe) is a promising approach for tailoring ion tracks in the near-surface of defective KTaO 3 . Experimental characterization and computer simulations reveal that the size of these latent ion tracks increases with S e and level of pre-existing damage. These results further reveal that the threshold S e value (S e th ) for track creation increases with decreasing pre-damage level. The values of S e th increase from 5.02 keV nm -1 , for a pre-existing fractional disorder of 0.53 in KTaO 3 , to 10.81 keV nm -1 for pristine KTaO 3 . Above these thresholds, amorphous latent tracks are produced due local melting and rapid quenching. Below a disorder fraction of 0.08 and S e ≤ 6.68 keV nm -1 , the synergistic effect is not active, and damage accumulation is suppressed due to a competing ionization-induced damage annealing process. These results indicate that, depending on S e and the amount of pre-existing damage, highly ionizing ions can either enhance or suppress damage accumulation in KTaO 3 , thus providing a pathway to tailoring defects states. Comprehending the conflicting roles of highly ionizing ions in defective ABO 3 oxides is vital for understanding and predictive modeling of ion-solid interactions in complex oxides, as well as for achieving control over ion track size in the near-surface of defective KTaO 3 .

36 MATERIALS SCIENCE↗

Mg and native defects in cubic silicon carbide from first principles

The diffusion of Mg defects in 3C-SiC is studied using the density functional theory. Mg has the highest burn-in rate as a transmutant in 3C-SiC when it is placed in high-energy neutron irradiation environment of a fusion reactor. The presence and evolution of transmutant defects impact thermal and mechanical properties of this important structural material. This study is focused on understanding the structure, stability, and evolution of Mg defects and the interaction of Mg with native defects in 3C-SiC. Our calculations of diffusion coefficients for different Mg defects suggest that Mg is likely to diffuse faster in pristine 3C-SiC than in the damaged one, in agreement with earlier experimental observations.

36 MATERIALS SCIENCE↗

On the relationship between topological and geometric defects

The study of topology in solids is undergoing a renaissance following an increase in interest in the properties of ferroic domain walls as well as recent discoveries regarding skyrmionic lattices. Each of these systems possess a property that is 'protected' in a symmetry sense, and is defined rigorously using a branch of mathematics known as topology. In this article we review the formal definition of topological defects as they are classified in terms of homotopy theory, and discuss the precise symmetry-breaking conditions that lead to their formation. We distinguish topological defects from defects that arise from the details of the stacking or structure of the material but are not protected by symmetry, and we propose the term 'geometric defects' to describe the latter. We provide simple material examples of both topological and geometric defect types, and discuss the implications of the classification on the resulting material properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin qubit properties of the boron-vacancy/carbon defect in the two-dimensional hexagonal boron nitride

Spin qubit defects in two-dimensional materials have a number of advantages over those in three-dimensional hosts including simpler technologies for defect creation and control, as well as qubit accessibility. In this work, we select the V B C B defect in the hexagonal boron nitride (hBN) as a possible optically controllable spin qubit and explain its triplet ground state and neutrality. In this defect a boron vacancy is combined with a carbon dopant substituting the closest boron atom to the vacancy. Our density-functional-theory calculations confirmed that the system has dynamically stable spin triplet and singlet ground states. As revealed from our linear response GW calculations, the spin-sensitive electronic states are localized around the three undercoordinated N atoms and make local peaks in the density of electronic states within the bandgap. Using the triplet and singlet ground state energies, as well as the energies of the optically excited states, obtained from solution to the Bethe–Salpeter equation, we construct the spin-polarization cycle, which is found to be favorable for the spin qubit initialization. The calculated zero-field splitting parameters ensure that the splitting energy between the spin projections in the triplet ground state is comparable to that of the known spin qubits. We thus propose the V B C B defect in hBN as a promising spin qubit.

2D BN↗

Duality defect of the monster CFT

Abstract We show that the fermionization of the Monster CFT with respect to Z 2 A is the tensor product of a free fermion and the Baby Monster CFT. The chiral fermion parity of the free fermion implies that the Monster CFT is self-dual under the Z 2 A orbifold, i.e. it enjoys the Kramers–Wannier duality. The Kramers–Wannier duality defect extends the Monster group to a larger category of topological defect lines that contains an Ising subcategory. We introduce the defect McKay – Thompson series defined as the Monster partition function twisted by the duality defect, and find that the coefficients can be decomposed into the dimensions of the (projective) irreducible representations of the Baby Monster group. We further prove that the defect McKay–Thompson series is invariant under the genus-zero congruence subgroup 16 D 0 of P S L ( 2 , Z ) .

Physics↗

Point defects and impurities in fluorite PuO 2

The native surface oxide of plutonium plays a critical role in ensuring the stability and safe storage of the underlying metal; consequently, understanding the role of defects and impurities in determining the properties of the oxide layer is critical. Here, in this study, we use hybrid density-functional theory calculations to evaluate the electronic structure and defect chemistry of PuO 2 , the most stable of the native oxide phases, including both native and extrinsic defects. We find that oxygen vacancies (𝑉 O ) form readily in PuO 2 , as do polarons. Electron polarons (𝜂 − ) are the lowest-energy acceptor species in PuO 2 , while the charge compensating donor species will shift from 𝑉 O under O-poor conditions to hole polarons (𝜂 + ) under O-rich conditions. Nitrogen and fluorine can substitute readily for oxygen atoms under O-poor conditions, while fluorine can also incorporate in an interstitial configuration (F$^−_i$) under more O-rich conditions. Carbon and chlorine incorporation in PuO 2 will be very limited. We also evaluate the kinetic barriers for oxygen-related defects, which we find to diffuse readily when present. Our results provide valuable insights into the critical role and variable chemistry of point defects and impurities in PuO 2 , which in turn have important implications for the safe storage of the underlying metal layer. In short, exposure of freshly prepared plutonium to reactive nitrogen- and fluorine-containing contaminants should be avoided, while carbon- or chlorine-containing contaminants are less likely to incorporate readily into the oxide.

Materials science↗